Equium A200-15i - cannot use the WLAN network

Similar Questions

• Equium A200-15i: cannot see wireless network adapter

  Hi all.

  I tried to install the drivers on my laptop wireless without a bit of luck.
  My network card works, and I can connect to the internet via ethernet. But wireless doesn't work at all.

  I checked under network adapters and Device Manager, it shows realtek fast ethernet nic and 1394 network adapter.
  In the other devices section, it shows Ethernet controller... I tried to score for the drivers that I downloaded but it says "no new pilots could be detected.

  I hope someone can help
  (also - wlan is enabled in the laptop, but nothing happens - and it only shows my connection to the local network in network connections)

  I see that your wireless network card is not mentioned under network adapters in the Device Manager and so I m 1005 sure that Wlan card driver was not installed.

  I think that you were unable to install it because you used all just a bad driver!
  Equium A200-15I belongs to the * PSAE2E * series.

  Please check that you have chosen the right notebook series and downloaded the correct driver.
  As far as I know this unit should support the card of XB63L Wlan Atheros 11 b/g (13ch).

  Good luck buddy

• Equium A200-15I can't find wireless networks after recovery

  After making a recovery using the Vista CD from my computer (an Equium A200 15I) cannot find wireless networks. I went into the device under network adapters Manager and then there is realtek RTL8101 Ethernet NIC etc and in the other devices section it is Ethernet and controller of Stoeage of mass.

  I'm not really sure how I can get the computer to recognize and wireless networks, but I am aware that the driver is missing!

  Hello

  Try to update the wlan driver:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  You can also check for other drivers if it is not installed:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Equium A200-15I - cannot connect to networks

  I have an Equium A200-15I and unable to connect to wireless networks. I can connect properly to my network wireless at home and in the past have had no problem connecting to networks wireless in other places.

  However, recently I have been unable to connect to random networks, some security enabled (for which I have the password) and one that was not secure, but that I have connected to in the past (to my parents house in the middle of the campaign, so no need to secure). He found fine networks and I can click on connect and put the password and then it flashes just between IP address acquisition and disconnected and not connects. I know that passwords are correct. I tried connected to the network woreless manually, and the same thing happens. It's really frustrating.

  I also have problems in playback of some DVD.

  I would appreciate help with this.

  Thank you

  Hello

  The WLAN driver is perhaps the reason for this and the work of doesn t correctly. You should check the Toshiba for WLAN driver update page:
  http://APS2.toshiba-tro.de/WLAN/

  In addition these WLAN issues may have different reasons. Also, a bad WLAN configuration would be possible. So, you should check the WLAN settings and configuration of the router. Also, an update of the firmware on the router could be useful.

• Equium L40: After bad Bios update cannot use the WLan

  Hi there hope someone can help.

  I've updated the Bios as tempo toshiba said, but I have not read the last piece. Who was that it is not for mine which is the model L40.

  I have now tried to put the right pair, but he says he can't. As I'm putting that has an earlier date.

  My main problem now is that my wireless stopped working, it says its there and so to work, I put the switch on, but he can't find any networks he used to find approximately 4 in my area

  Do I have to restore my entire system :(?

  I'm really confused about your message because the European Toshiba page provides drivers and BIOS for one Equium L40 series m.
  I found 2 different versions of the BIOS for Equium L40; a BIOS for XP and a BIOS for Vista.

  In my opinion it of almost not possible to update the BIOS with the wrong version

  However, it you have updated and used the wrong BIOS, then you must contact the ASP to help

  But first, I recommend a check of the WLan configuration

• New Satellite U400 cannot use the Wlan in Vista

  This is my first post! I just bought a whole new race of Toshiba Satellite U400 Vista Home Premium and I cannot get the wifi to work with my router (which works very well with a Toshiba Quosmio, philips, Nokia N85 phone and iPod laptop).

  He sometimes worked but is virtually unusable.

  I get access: Local only and whateverf as I do, I can't work properly.
  I use encryption WEP 128 bit on a router/modem US Robotics 9106.

  Any help gratefully otherwise received I will take this back to the shop because it is not a usable product.

  Thank you

  I have

  Hello

  I recommend you do the BIOS update. Here you can compare the current version on your laptop, latest on the Toshiba download page.
  Compare also the WLAN driver version.

  After BIOS update the WLAN test new functionality. In a first time without any form of encryption.
  Please post the results.

• Equium A200-1AC - cannot remove the second HARD drive cover

  I have an Equium A200-1AC, there is also a second HARD-drive Bay, but I can't get the cover off the coast, can anyone help?

  Hello

  As far as I know, this HARD drive cover is only guaranteed with a screw and after the withdrawal of these screws, you should be able to remove the plastic cover.
  Maybe it's sticks somewhere, you can use a thin object and could leverage with caution
  But don t do something with force!

• Equium A200-1V0 - cannot create the hibernation file

  Equium A200-1V0, Vista Home Premium (SP2)

  Hibernation has disappeared recently. I just did a cleaning disc. I have tried to go to the command prompt and enter powercfg / hibernate on, but I get a message saying that the system could not create the file of hibernation with a specific error code: 0xc0000022.

  Suggestions, please?

  Thank you.

  Hi Peterspragge,

  You have enabled hibernation in Vista power management?
  What happens if you press the FN + F4 key combination to enter hibernation mode?

  I never had a problem with the Hibernate in Windows mode and I think that his Microsoft more related question.
  Have you looked on the forums of Microsoft solution possible?

• Cannot use the calendar network unavailable or slow app. The application takes more time to load than expected.

  When you use iCloud on my iMac I get the message "network unavailable or slow. The application takes more time to load than expected. "This has been the case for several hours, but other applications I use (Mail, Contacts, Notes, reminders), all seem to work well.  The

  I have the same message when I try to load the reminders in iCloud. All other applications work correctly. This issue has been ongoing for about a month now.

  Have this problem on my work computer running Windows 7 SP1 Pro and Macbook Air late 2009 w / OS X 10.11

• Satellite A200 PSAF0A - cannot use the DVD writer / reader more

  Hello
  Anyone has any advice on this?

  Laptop: Satellite A200, PSAF0A
  Require: DVD burner / player sofware.

  My hard drive died last week, so a techno guy installed a new and reinstalled the OS (Vista)... everything works fine. But don't have Toshiba Utilities for the use of the DVD burner / player more. Where is it? I downloaded the player to DVD from Toshiba, but it does not work. It doesn't do anything. Media player plays sound but no video.

  The software that I used to play DVDs accompanying the package when I bought it; InterVideo WinDVD I remember well.
  I downloadeded V 8, but it does not work either. I need Codecs etc, right?

  Looked at Toshiba Europe site for the DVD player, but I think it's the same DVD s/w that I have already downloaded.
  But there is no download of my model, PSAF0A (Satellite A200) in all cases.

  I do not have the CD - they are comfortable in another country! (Unless, of course, my nephew is using them as a frisbee that could well be the case). Help!

  It seems that Toshiba do not publish the DVD software on the site... maybe its due to the issues of the region / license?

  Try AVS DVD Player (its free).
  If you need a MPEG2 codec, install ffdshow

  The two are in http://www.free-codecs.com

• How to use the resolution to 1280 * 768 on external TV with Equium A200-15i

  I have my laptop Equium A200-15i hooked to my Bravia HDTV which accepts entries to 800 * 600, 1024 * 768 and 1280 * 768.
  But my laptop will be released only in 800 * 600, 1024 * 768 and 1280 * 600 and I want to use the full screen on my TV.

  I read a few other posts on this subject and I think that the problem lies in the BIOS, and I've not being updated since I got it in September, but I was wondering too since I'm Dual-booting Vista and XP pro, there will be problems with the BIOS I download?

  There seems to be two more different for Vista and XP, who apparently get along out of each other.

  Finally, update the BIOS problem will be solved my monitor extended?
  And updated the BIOS using the BIOS XP Download break my laptop/vista partition?

  Should I just not bother with the Dual-boot and go Vista/XP only?

  Thanks in advance

  The BIOS is not the problem!

  The fact is that your display driver doesn't support the resolution of 1280 * 768, and so you can't choose it.

  Once again;
  > Finally, update the BIOS fix my extended monitor?
  No, as I said above, you can't choose your preferred resolution because it s not included in the graphics driver.

  > And updated the BIOS using the BIOS XP Download break my laptop/vista partition?
  No, but if Vista is installed on the laptop then I advise you to use the version of vista BIOS.

  > Should I just not bother with the Dual-boot and go Vista/XP only?
  Dual-boot is recommended according to me ;)
  I have dual boot on my second notebook too. Dual boot has many advantages...
  As you know from the beginning of the applications don't run correctly with Vista and if you have installed XP then you can run it without big problem ;)

  Welcome them

• Equium A200-15i: I can't use the touch pad - no response

  I can't use the touchpad in my equium A200-15i.
  When I press the button, there is no response at all.

  Please help me to solve it.
  I tried to uninstall the program and reinstalled, but the problem persists.

  Hello

  Have you checked if the touchpad is properly activated?

  Using the FN + F9 key combination, you can disable and enable the touchpad feature!
  Please check this function if you have not disabled the touchpad accidentally!

  Last but not least, I would recommend checking settings the touchpad mice control-> Advanced-> advanced settings panel.
  You will find different options that can be configured to use all available touchpad features.

  Best regards

• Unable to get Internet using modem internal dial on Equium A200-15i

  Using my new laptop EQuium A200-15i while a Wi-Fi by Netgear has been created, I could not get the internal modem to dial up to my ISP on PAYG (to serve as a backup in case of need).
  Device Manager indicates the modem is not working properly and the driver is up-to-date. The number of dial ISP (Virgin) is also correct - I can connect to the internet using the same number of ISP of my desktop computer.
  I think I put in place the ISP connection correctly - I get a ringtone of the laptop but every time can not pass and a screen of failure rises. Y at - it still configuration of Toshiba laptop that is needed?
  The modem would be defective? Is there a technical contact E-mail for Toshiba
  Any ideas?

  Hello

  In the first post you talked you a failure screen which appears after the failure of the modem connection. Could you please post the error message?

  In addition, it would be desirable to set up the Modem region selection utility that should be in programs-> Toshiba-> Networking folder.
  Delete the old profile and create a new one.

  Good luck

• Re: Equium A200-15I - crack suddenly appeared on the screen

  Hello

  I bought a Toshiba Equium A200-15I laptop about 15 months ago, and I'm not sure that this is under any kind of warranty or not.

  A few weeks ago I tried to turn on the laptop but a crack suddenly appeared on the screen and the screen has been damaged. It seems as if the crack is internal, because I can't feel anything on the surface of the screen.

  I wonder how it is possible to know if the laptop is under warranty or not, and if not, if it is possible to fix the problem.

  Thank you very much
  Ken

  Hello

  This guy s shame

  I fear that this issue is not could be covered by warranty m.
  These cracks may not appear without reason
  I think that something touched the screen and led to this crack

  In any case, you could simply ask a technician ASP in your country for details and the manipulation of the Fryer, but I doubt that the warranty would cover replacement.

  Welcome them

• Satellite 2430-301: cannot use 2200BG WLan card because the switch is off

  Hello

  I have a Satellite 2430-301, which was not delivered with WLAN functionality. But I discovered, that there is a MiniPCI slot in the laptop.

  So, I bought an Intel® PRO/Wireless 2200BG Minipci card. After that I joined the card in the laptop, it has been detected by windows as a new network device. I downloaded and installed the drivers of Windows XP (because I have Windows XP installed on the laptop) of Intel (9.0.4.17) home page. The installation worked perfectly.

  Now I tried to connect to a wireless network, but the software Intel says that the card is on 'off '. So I changed the menu drop-down on "on", which resulted in a mistake in German: "Die Intel (r) PRO/Wireless-Netzwerkverbindung ist noch deaktiviert.» Aktivieren Sie sie über your Hardware-switch. "(which means something like 'network Intel (r) PRO/Wireless connection is turned off. Turn it on with the hardware switch. »).

  Although the switch was already in position "on", I spent several times - nothing important happened. The led next to the switch will not illuminate in both positions.

  Are there problems of incompatibility between "Toshiba Satellite 2430 301" and "Intel PRO/Wireless 2200BG?

  I did something wrong?

  Is - this darn broken hardware switch?

  Any suggestions?

  I would be really happy if someone could help me :)

  Thanks in advance,
  Thuriel

  Hello

  The hardware switch led should light up if the switch is on.
  In addition if you want to use the WiFi network you must go to the WLan with FN + F8 option.
  In addition, you must check the WLan card properties in Device Manager. Here, you enter the Advanced tab. In the field of property choose radio power option and select the value to on.