Link with the third-party library

Similar Questions

• Using the third-party library

  Hello, I intend to use the 3rd party library in my application of cascades .

  I downloaded from GitHub and I compiled and generated the libNAME.so file.

  How to use this library in my application? - This could someone guide me please? I reading the articles, but it is not clear enough.

  Thank you!

  No, the file is somewhere else, I put it in a lib folder, but it is still linked with the full path, do not know if you can change that a relative path somehow, as is the PRI of the file that is automatically generated.

  the include directory has files of header in my case

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• Create pots Stanadlone with the third-party provider API

  Hello
  I'm working on a few personal explorations using OSB 11 g, and for that I have to call a few pots with my code. But the problem is that I use Apache POI API to read MS Excel files. So, how can I go on the export of the POI API with my code in a single POT. It must be one of the JARS, since to the best of my knowledge OSB does not support referencing multiple jars at one time.

  See http://java.sun.com/developer/technicalArticles/java_warehouse/single_jar/

• I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they

  I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they add the js include. They recommend at this time that I use another program like Wordpress, but I won't do that, because a large part of the site is designed and just add the markets. Here is the link to the site. At this point, the home page is the question. I can also provide a screen shot of how markets are supposed to look like

  This part does not seem too difficult.

  I bet they are now trying to "knit" their share of data right in your Muse- generated page, and they tell you that your code is terrible (and their smells like daisies). The usual clash...

  But it might be easier for you (and many others) if they offer their content as a separate page of small, so you can incorporate it as an iframe tag in an HTML object in Muse. No matter what code for permission to host the iframe, could be inserted as a simple script in Panel of Options of Page of Muse.

• Disable the menu item in the third party application (such as Photoshop)

  Please suggest me to disable the menu item in the third party application (such as Photoshop).

  Hello

  I suggest you to send your query to the following link:

  Photoshop Help Center: http://www.adobe.com/support/photoshop/

  Hope this information is useful.

• Bug trying to create the link with the Cyrillic characters in URL

  I'm transforming words in my text on the links, but with Cyrillic characters in their URL (such as https://en.wiktionary.org/wiki/ хорошо). The problem is that, depending on how create the link, the page refuses to accept the URL.

  It's my preferred method (which accepts not the Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Paste the URL (https://en.wiktionary.org/wiki/ хорошо) in the field;
  4. Hit enter or click out;
  5. When I check the link, it is www.apple.com.

  The strange is that other methods work very well.

  1 against nature (accepts Pages):

  1. Delete my word;
  2. In its place, paste the URL (https://en.wiktionary.org/wiki/ хорошо);
  3. Hit the space bar (a link is created automatically with the correct URL);
  4. Edit the link that is created and change its text;
  5. When I check the link, he kept correct.

  2 against nature (accepts Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Find a way to build a version with my URL (https://en.wiktionary.org/wiki/%D1%85%D0%BE%D1%80%D0%BE%D1%88%D0%BE) escape sequence;
  4. Paste the URL with escape sequence in link field;
  5. Hit enter or click out;
  6. When I check the link, ironically, is хорошо https://en.wiktionary.org/wiki/.

  To stretch more:

  1. Editing a link created successfully (with any success methods above);
  2. Changed its URL (from хорошо https://en.wiktionary.org/wiki/ to https://en.wiktionary.org/wiki/ плохо)
  3. Hit enter or click out;
  4. When I check the link, it's still хорошо https://en.wiktionary.org/wiki/;
  5. Finally edited and changed its URL still once, now remove the Cyrillic (https://en.wiktionary.org/wiki);
  6. Press enter, click out and he finally accepted the URL.

  Pages seems to be denying the creation of links with the URL that contains Cyrillic characters (only?), but exclusively through his little creation of link popup. I think it's a simple problem, but I'm sure it's very annoying.

  Everyone knows the same?

  Cyrillic characters in the range of table encoding UTF-8 code points u + 0400 - u + 04 FF are represented by two bytes. These people must be encoded as a percentage (read the two paragraphs of the current standard of article), as the Pages v5.6.2 will convert automatically URI to this encoding for you in the link Inspector. It will simply ignore what it considers incorrect URI links, they are Cyrillic, or even English.

  Use what is easier for you, and that Pages v5.6.2 accepts.

• iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:

  Notify your credit card company / bank of potential fraud

  Change your bank accounts and report your fly/fraud credit card

  Change all of your passwords

  And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.

• Would it not safe to export reg to the third party?

  Would it not safe suite export reg to third party for investigation?

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\enum\Root
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
  HKEY_LOCAL_MACHINE\SOFTWARE
  HKEY_CURRENT_USER\Software

  Hello

  By exporting the following registry locations you give information below to the third party for investigation.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\enum\Root stores your computer hardware information.
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services stores the information on your network
  HKEY_LOCAL_MACHINE\Software, contains information of all the applications installed on your computer.
  HKEY_CURRENT_USER\Software, contains the information of the applications that are used by the user who is currently logged on.

  It is up to your discretion whether to provide the information or not.

• Is it possible to invoke the third party application every time that the user receives an incoming call

  Hello

  I have some doubts in regard to invoking an application third, whenever there is an incoming call (by observing the change in status of the phone). The third-party application must be called as soon as the user gets the call and must replace the appication of dial phone by default/native.

  Please suggest me some ideas if the above can be implemented or not. If it can be put in place what is possible?

  Also suggest me if there is another way to achieve this.

  Thanks in advance,

  Arun

  Got the solution after enough research:

  In Blackberry the substitution of native applications in is not possible. When there is a call that is a priority interruption that all applications are moved to the bottom and the phone call will be prioritized. When an incoming call is there is not possible to invoke the third about, we can take control as soon as the call is completed.

• I just updated my system to yosemite 10.10.3 software. I don't seem to be able to establish links with the APPs on my desktop creative cloud. I have just a spinning wheel?

  I just updated my system to yosemite 10.10.3 software. I don't seem to be able to establish links with the APPs on my desktop creative cloud. I have just a spinning wheel?

  

  Does not open App | Wheels of progress turn continuously

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-app-doesn ' t - open.html

• Is it possible to use WCM open to the third-party application J2EE jsp tags?

  Hi all
  
  Is it possible to use tags jsp WCM opened in the third-party J2EE applications that are deployeed on websphere or tomcat? I have a client who want features WCM port such as onlin edition on their application WAS? Any suggestions? Thank you very much.
  
  
  Kind regards
  Joe

  Hello

  You can use the WCM_PLACEHOLDER function to display the content of the definition of the region and the data file on any 3rd party portal.

  To call the contributor of the 3rd party portal you can use WCM_BEGIN_EDIT_SESSION service.

  These services work for SS - Designer based on sites and site elements.

  Thank you
  Srinath

• DB link between our client and the third party provider

  There is a third party provider that has its own db containing information on supporting documents.
  
  There is a link in db between db and db of third-party customer
  
  Now for our client we create vouchers through the UI in our database that must be verified in third-party provider db and created in our database
  
  How can achieve us

  Why don't you create a view in your DB which is ' select * from ".

• Alerts are have passed to the third-party tool with a some minutes along 2 late

  Hello

  I use this script to pass the Foglight alerts to a third-party tool:

  ServiceAlarms = #! FSMCategory: name = 'Test' # .topologyObjects [0] .aggregateAlarms

  found = ServiceAlarms.find {a-> a.alarmId == @event.get ("alarmID") ;}}

  If (found & @event.get ("severityLevel") > = 3 &)
  (@event.get("change/value") == 0) {}

  Returns true
  }

  This works successfully to transmit alerts for servers in the "Test" group and also as critical and fatal events without transmitting the events of compensation as it did before.

  But now the problem is that alert is get passed after about 2 minutes of being trigger who should not happpen and we want to get alerts immediately transmitted on fires.

  Help, please.

  Yes I use the script in the Condition of the rule.

  

  

• Impossible to retart Window XP as an administrator with the same "selective startup" newspaper (with some third party being disabled services) with an administrator account.

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  Repair facility and get rid of Norton once you are able to get into your computer again.