Linksys router WRT160N v3 warning disconnect and reconnect

Hi all

I know that you've all probably seen this thread before. (I know I have).

I have a WRT160N v3 Linksys router and it keeps disconnect them and then reconnect. It disconnects wireless only. LAN still works fine.

I tried many different methods to solve this problem, but none does not seem to work.

I'm very disappointed with the quality of the product. He did everything since it was purchased. I personally would have sent in for repair, but others in my household would not have agreed to that.

Additional features:

-Firmware Version 3.0.03 (no later than as of July 2010)

-A a SSID set to broadcast

-A encryption WPA2-Personal

-Mixed-mode network

-Width of the channel set to Auto (20 MHz or 40 MHz)

-Channel set to Auto

Please help me solve this problem.

Thank you in advanced.

In my view, that it is corrected. I'm using dd - wrt firmware instead of ciscos

Tags: Linksys Routers

Similar Questions

  • Fuze 4 GB warning disconnect and reconnect to Windows 7 pc... when the battery is low.

    So I just got a rocket and I love it.  Done a good deal about it.  Windows 7 picked it up and transfer of music is not a problem when the unit is fully charged.

    What IS a problem, is that when the battery is low and I have to plug the "rocket" on my PC to load... it keeps connection / disconnection.  The program of control of rocket guard Center popping up and go, arise and disappear... frustrating.  I tried the DPW and MCP modes (actually in DMC mode on the control panel is not everything and it does not recognize that the device is connected).  I've tried different USB ports.  No hub at issue here.

    Here's the kicker... If I load the "rocket" first (plug into a USB Kindle charger), once it has loaded it connects very well.

    Ran the update of the firmware and I'm on the latest firmware it was available, 1.02.31.

    I would like to know how to solve this problem, because I don't always have the small USB Kindle charger with me, and that would well be load from a PC... which is what the original, right intention was?

    Except that I like it and really dig the FM radio tuner.  It is very bad!

    Hosers, all.

    Usb hub 4 ports powered solved my problem.  'duh, I think yer cable is bad' I DO NOT.  Apparently, the "rocket" sucks just too much power.

    So I solved my problem with a $ 5 usb hub.  Yippee.

  • Internet connection no longer works unless I have disconnect and reconnect the wifi regularly

    I find that after a time random, maybe twenty minutes a half an hour or so, my internet connection breaks down and it can only be fixed by disconnecting and reconnecting to my wifi network.

    It is a problem on my iMac of retina 2014 running El Capitan and 2011 MacBook Air my wife running Mountain Lion (but not on my MacBook Air of 2011 which takes place in Yosemite).

    It does not seem to be triggered by almost anything, but it's maddening to have to do all the time. It's a router NetGear btw, less than a year.

    If anyone has a solution I'd love to hear it!

    Greetings, peederjigson!

    Welcome to the communities of Apple Support! It seems you have some problems to stay connected to the Wi - Fi on some of your devices. This is not how it is supposed to work so I'll be happy to help you.

    Use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - even with a new router, the firmware may need to be updated. But this article can go a long way to point out where it is.

    The potential of Wi-Fi and Bluetooth interference sources - because this is not the case with all your devices, it could be other things blocking the signal. Here are a few potential sources.

    Recommended settings for the WiFi routers and access points - because your router is "-ish" make sure that the settings are correct.

    Have a great day!

  • Internet keeps disconnect and reconnect every 3 minutes

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    Internet keeps disconnect and reconnect every 3 minutes approximately. I changed the computer so its near the door (the router is in the room) but I never had this problem with my laptop.

    Hello

    1. which version of the Windows operating system is installed on the computer?

    2 did you a recent software or changes to the material on the computer?

    You can go through the steps mentioned in the link and the Coachman.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • WiFi disconnect and reconnect using

    I'm using the lenovo laptop, win 7 x 64 ultimate, my ISP is PLDT, plan 1299 dsl + landline phone with wifi 1 MB/s... my internet connection is almost a year old, but my problem started recently, I don't know if the problem is in my laptop or connection internet but wrong just describe it...

    PROBLEM:
    whenever I surf the internet using my laptop connected to my wifi at home, I work well for 5-10 minutes and all of a sudden, it won't. whenever I click on something, as button links on the Web page or reload, the problem appears suddenly it disconnects and reconnect my wifi this is why I can't use internet effectively. the problem appears randomly and its such a pain. can not download, download and it stops same loading pages. her disconnect and reconnect only happen 2secs. but randomly as the interval 10-20 sec. My office is connected to the router even wifi using a cable, and it is not affected by the disconnection of the link that leads to me that the problem is on my laptop. but it works perfectly all of these days, I even play games online and work perfect but now, this problem occurs.
    I change all the settings here in my cell phone that happens all of a sudden, it all started when my office has been reformatted, but I think that its not relevant.
    other devices and laptop computers which connects to my wifi doesn't have ds problem.
    peuvent some please help.
    I've already checked the network devices if his driveers are outdated, but it says its updated. Here's some more info.

    PLDT chanel
    http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/4_zps1b9da489.jpg

    Device Manager
    http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/3_zps84e77a9c.jpg

    Dxdiag
    http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/2_zps09d0a3c9.jpg

    My computer properties
    http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/1_zps95f9eea0.jpg

    PLDT Info
    http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/5_zps90401ed2.jpg

    You can send me a mail or comment just so you can help me.
    E-mail address is removed from the privacy *.

    HERE IS THE VIDEO LINK
    http://www.YouTube.com/watch?v=2fc4741k3C0

    Hi Louis,.

    This problem can occur because of network settings, try the following methods and check if it helps.

     

    Method 1:

    Run the network troubleshooter, and check if that helps.

    Network troubleshooting

     

    Method 2:

    This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

    To disable authentication IEEE 802. 1 X, follow these steps:

    a. Click Start, type ncpa.cpl, and then press ENTER.

    b. right click on your wireless network connection, then click Properties.

    c. click the wireless networks tab.

    d. under preferred networks, click your wireless network, and then click Properties.

    e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

    Refer to the steps in the following Microsoft article.

    Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

    Keep us updated on the status of the issue.

  • mount a drive without having disconnected and reconnected

    Is there a way to go back a disc that you have removed, without having it disconnected and reconnected in it?

    Thank you!

    The Finder, choose utilities go to menu, open disk utility, select it in the sidebar and press the mount.

    (140214)

  • The mouse disconnects and reconnects randomly.

    I am running Vista 64 bit and am currently using a Razer Krait mouse. Only randomly, the mouse disconnects and reconnects for about two seconds every 10 minutes. It has nothing to do with the mouse, because I tried it on my friends computer and it has worked. The time that it happens mostly when I'm in a computer game. I really need help, I searched other forums and I could not find the answer. * It is not a wireless mouse *.

    No, I have not all usb 2.0 ports. I eventually found a new mouse and its fine. I guess it's just the mouse and that it should be replaced. Thanks for all your help.

  • When running Vista Home Premium 64-bit. I disconnected and reconnected to my work programmes often... where calls interrupted

    I had my internet provider here at least 10 times in the last 2 weeks. They see no problem.  I gave my computer to Microsoft, he ran and saw no problem.

    But I still have questions!  Even online game (poker), you can see where it disconnects and reconnects repeatedly.

    Can any help...?

    Hi LoriBob,

    1. is the part of the computer from the domain?
    2. when the last time programs worked well?
    3. What is the type of internet connection you use?
    4. only happens to the programs or even disconnected Web sites?

    If this only happens with online programs, it is possible that some third-party programs installed on the computer is behind internet connection dropped.

    I suggest that you do check and clean boot, if it works.

    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on Start, type msconfig in the search box and press ENTER.
    2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
    3. on the general tab, click the Normal startup option, and then click OK.
    4. When you are prompted to restart the computer, click restart.

    If the problem persists then you need to update the network adapter drivers on the computer by visiting the network card manufacturer's Web site will download and install latest driver update.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Smartphones blackBerry with curve 9320 problem: I need to disconnect and reconnect to receive mails and browse

    Hello

    I have the following problem with my BB Curve 9320: several times per day email stop and I can't use the Internet (while telephone calls normally).

    Whenever this happens I have to disconnect and reconnect to the network. As soon as I reconnect to the network again starts the flow of electronic mail and Internet is available.

    I contacted my mobile operator (wind, Italy) and told me that it is not for lack of wind, but a technical problem of the phone.

    Thanks in advance for your support.

    Marco

    Hi, KIDA,.

    Try one of the following - option

    1. when your device is turned on, remove the battery for a minute and then reinsert the battery. This do a reboot your device that addresses minor issues with the BlackBerry.

    2. KB17877 how to start a smartphone BlackBerry in Mode safe

    3. have a backup of your device data and then have a security wipe. Options > Security > Security Wipe. Enter "blackberry" without the quotes. This will delete all your data from the device.

    4. consider the update/reinstall the OS device.

  • Laptop goes into a spasm of disconnect and reconnect a USB 3.0 drive

    Original title - USB 3.0 unplug plug back

    I have 2 computers running Windows 8 Pro 64-bit. 2 computers have the same USB Microsoft drivers, the same set of Intel chips (both with the i7 processors) from the same manufacturer of motherboard. They have the same operating system, same programs, clean installs with drivers to date and windows updates, they're practically twins with the exception of a material fact; one is one laptop, the other a desktop computer.

    Two computers, although very similar in there profiles of hardware (Device Manager) and in contexts there, seem to have their preferences on what USB 3.0 devices that they like or dislike.

    The laptop will go into a spasm of disconnect and reconnect a USB 3.0 drive, whenever I plug. The office like this player and everything will work day and night. However, when I plug in a USB 3.0 flash drive in desktop and start transferring a file, it disconnects and reconnects the reader, which damages the transfer. The laptop like this USB 3.0 flash drive and will transfer files to and from this day and night.

    Of Corse it's backup and data transfer between 2 computers, although they are very similar, very difficult. Devices USB 3.0 a computer like the other goes into a conniption fit with.

    I tried everything I can think of. Updated, updates to the BIOS, software configurations, reader driver manager settings, different formats of devices, software of turbo boost, installs own, you name it. It is important to note that none of the problems happen with any of my USB 2.0 devices.

    Are there not a universal standard of USB 3.0? 2 computers act as if they have 2 different USB 3.0 standards! And each device will work with a standard computers. Is there a laptop computer and a standard desktop computer? LOL, it's nuts!

    SOLVED *.

    I solved the problem.

    Just ignore my other messages troubleshooting efforts earlier.

    The problem is with the Microsoft Windows 8 driver for:

    "Intel (R) USB 3.0 eXtensible Host Controller - 0100 (Microsoft).

    The Microsoft Driver is dysfunctional , and there is no other driver available!

    I have disabled> Intel xHCI in BIOS on all my computers to get a partial solution to this problem of Microsoft .

    With XHCI disabled in BIOS driver Microsoft dose does not and so I can use USB 3.0 with controller Intel devices (although they are paralyzed, at least they work now).

    As a big bonus:

    My PC has 2 not intel USB 3.0 controllers!

    With Intel xHCI disabled in BIOS and no Microsoft Driver to mess things up that my 2 other controllers can now go full speed USB 3.0 there little made in China drivers! Windows8 should get fixed soon!

  • Zune and Windows 8 "error reading the Zune software cannot access important data on your Zune." Try to disconnect and reconnect it. If the problem persists, contact customer support. "

    I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

    I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

    Message error "the Zune software cannot access important data on your Zune.

  • Welcome to chance, disconnect and reconnect itself

    Seems that I came across a weird problem. Randomly throughout the day our two guests are disconnect and reconnect. The period between disconnection and reconnection are about 1 to 2 seconds in length and interfere not actually with virtual machines. I can't understand why this is happening. We run ESXi 4.1.

    I have attached a few screenshots. Any help would be appreciated.

    Your statement in your quick editing above, I would say that your guests are not correctly configured in DNS.

    If you can only ping via IP to other machines and not using their host names FULL domain name, then you need to check that your hosts have appropriate entries and return in DNS.

  • Why users need to disconnect and reconnect to the VPN to RDP?

    Most of the time our VPN works perfectly, but sporadically users must reconnect to the VPN to use remote desktop. Is that the user can log on to the VPN and access to things like network drives, but not other features like RDP. If they disconnect and then reconnect to the VPN, poof, everything works fine. No matter if it is minutes or hours in the VPN connection, it still requires reconnection. It seems that it is always on the second attempt at the nick of this post point called 'the second time's a charm

    We are using RRAS in SBS 2008 and the problem is multiple users tempting to VPN in XP and Win7 machines. We replaced the switches (now using Dell Powerconnects) and the router (now using Cisco RV042) and the problem persists.

    Suggestions or responses are greatly appreciated.

    Hello

    The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • Apple TV remote disconnects and reconnects constantly!

    I have the new Apple TV and recently, I get a message to display on the remote control is disconnected and then a few seconds later reconnects.  This happens even if the remote control is sitting on a table intact.  I have restored the Apple TV to factory settings, but the problem persists.  Someone at - it a solution?

    I suspect you have interference with other equipment nearby. Intermittent problems are often the result of interference. Interference can be caused by other networks in the area of or household electric goods.

  • Why my Dungeon Messenger disconnect and reconnect? __

    Why keep back my Messenger is disconnected and then reconnected and disconnects constanlty?

    http://www.windowslivehelp.com/forums.aspx?ProductID=2

    They will help you with your question in the Forums above to Messenger.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for