Linux drivers NOR PCI-7332

Similar Questions

• There are Linux drivers for the 4351?

  
  

  Hello Mike,.

  No we do not have a driver that supports the PCI-4351 on a Linux system. The drivers current DAQ for Linux is

  NOR-DAQmx Version 8.0 for Linux

  NOR-DAQmx Base Version 2.1 for Linux

  In the readme.txt file, you will find information on all the different hardware that is supported by the driver. The PCI-4351 is not there.

  Another resource to check the compatibility of the driver is to go to the acquisition devices data (DAQ) Installation/Configuration Troubleshooting - Support of the Driver NOR-DAQ.

  I hope that this information helps you with your application.

  Kind regards
  Sandra T.

  Sales engineer | National Instruments

• card PCI-7332 performance is slow

  To using a card PCI-7332 in a Win7 pc and it runs slow.  By slow I mean what is specified in the 7330 OR and the Timing of 7340 NOR information sheet States that my while loop should run at a speed of 10 ms.  His race in a rate of 125ms.

  Please see the screenshot of the vi below.

  I don't think there would be a significant improvement by moving to a RT system.  It is true that there is less processing overhead compared to a pc, but the algorithms are the same.  A RT system would be more helpful if you were more interested in a more deterministic control.  You must use a RT system if you wanted the iterations to be ' one time ' not necessarily faster.

• 2220us G7: drivers for pci device G7 2220us - windows 7 64

  Decommissioning of the os from windows 8 for windows 7 64 and I lack of drivers. HP do not support win7 for this laptop G7 2220us

  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Missing drivers for PCI device please help!

  Hello:

  You should be able to use all the W7 x 64 drivers and software the g7z-2100 on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G7-2100-notebook-PC-series/5262610/model/5275620

  You need the driver for the hardware ID you have posted.

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56467.exe

• NOR-PCI 8431

  Hello

  I have a problem writing frames with 200 Hz (5mS) of fixed frequency using the NI PCI-8431/2 and LABVIEW 2013.

  Can't do images with a frequency constant 200 Hz (5mS). The frequency is changed during communication.

  Why?

  Please open closed vi and picture of the scope of the release of the port of the NOR-PCI-8431.

  Thank you.

  Lol that is an alternative operating system to Windows.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/11766

• Clock and hw external trigger with USB-6210 on Linux with NOR-DAQmx Base?

  I have two devices USB-6210 I need to synchronize so that they both collect data exactly at the same time. I was told by support OR I can send the clock off Dev1/PFI4 and have the two USB-6210 s read the clock in through their own PFI0. I also want to trigger data collected for each device by sending a trigger off Dev1/PFI6 and have two devices to receive the signal on PFI2.

  All my attempts to try this are filled with error messages and my research online seem to say that's not possible with USB devices on NOR-DAQmx Base 3.4.0f2 on Linux.

  I "ve tried using example AI programs and those who do not seem to work either for external clocks. Here is the code I tried:

  #include "NIDAQmxBase.h"#include 
  
  #define DAQmxErrChk(functionCall) { if( DAQmxFailed(error=(functionCall)) ) { goto Error; } }
  
  int main(void){    // Task parameters    int32       error = 0;    TaskHandle  taskHandle = 0;    char        errBuff[2048]={'\0'};    int32       i;
  
      // Channel parameters    char        chan[] = "Dev1/ai0";    float64     min = -10.0;    float64     max = 10.0;
  
      // Timing parameters    char        clockSource[] = "/Dev1/PFI7";    uInt64      samplesPerChan = 1000;    float64     sampleRate = 10000.0;
  
      // Data read parameters    #define     bufferSize (uInt32)1000    float64     data[bufferSize];    int32       pointsToRead = bufferSize;    int32       pointsRead;    float64     timeout = 10.0;
  
  printf("Calling CreateTask...\n");    DAQmxErrChk (DAQmxBaseCreateTask("",&taskHandle));printf("Calling CreateAIVoltageChan...\n");    DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(taskHandle,chan,"",DAQmx_Val_Cfg_Default,min,max,DAQmx_Val_Volts,NULL));printf("Calling CfgSampleClkTiming...\n");    DAQmxErrChk (DAQmxBaseCfgSampClkTiming(taskHandle,clockSource,sampleRate,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,samplesPerChan));printf("Calling StartTask...\n");    DAQmxErrChk (DAQmxBaseStartTask(taskHandle));printf("Calling ReadAnalogF64\n");    DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByChannel,data,bufferSize,&pointsRead,NULL));
  
      printf ("Acquired %d samples\n", pointsRead);
  
      // Just print out the first 10 points    for (i = 0; i < 10; ++i)        printf ("data[%d] = %f\n", i, data[i]);
  
  Error:    if( DAQmxFailed(error) )        DAQmxBaseGetExtendedErrorInfo(errBuff,2048);    if(taskHandle != 0) {        DAQmxBaseStopTask (taskHandle);        DAQmxBaseClearTask (taskHandle);    }    if( DAQmxFailed(error) )       printf ("DAQmxBase Error %d: %s\n", error, errBuff);    return 0;}
  

  When I run the resulting program, I see this:

  $. / acquireNScans-ExtClk
  The CreateTask call...
  Call for CreateAIVoltageChan...
  Call for CfgSampleClkTiming...
  Error-89136 DAQmxBase: route specified cannot be satisfied, because the hardware does not support it.

  For example, a clock and a trigger can be imported via one of the PFI lines by using a USB-6210 on Linux with NOR-DAQmx Base? A clock and a trigger exportable via one of the PFI lines?

  If so, does anyone have the code example illustrating how to do this, or can you at least tell me the names of the lines ("PFI0/Dev1" or other) so I can try again?

  Clues or suggestions would be helpful.

  Thank you

  -Tom

  The clockSource in the example specifies an output rather than an input channel channel. Change source "/ Dev1 / PFI0" solved the problem.

  Please close this post.

• PCI-6514 ignored supported in Linux drivers?

  Hello

  I noticed that the NOR-DAQmx base package includes no support for the PCI-6514 Board. Why is this? There are chances that it will be added in the future? NOR-DAQmx 8.0.2 becomes a bit long in the tooth, but it has support for the 6514.

  Hello

  DAQmx base is primarily intended for OS X and Linux operating systems. Given that the majority of our customers use Windows, and there is a limited amount of development resources, not all of our cards are suppprted on other operating systems. There is a chance that it could be added in the future, but I'm not aware of any current project to test this card with DAQmx base. If you have a Windows machine, you can always use the latest version of DAQmx to communicate with this card. I hope this helps!

• Compatibility of Linux NOR PCI 7851R

  Hi y ' All!

  I take into consideration this based FPGA Board to make digital acquisition/generation, plug it into a location PCIe to a PC running LabVIEW for Linux in a Red Hat environment.

  The data sheet of the "NI R series Multifunction RIO", it's the series in which this Council falls, does not list Linux in the paragraph "needs and compatibility." only several Windows OS.

  However, the description of the "NOR-RIO drier 14.0 for Linux" (which is the one used for this Board) mentions clearly PCI-7851R in the list of supported devices.

  Find these two statements a bit confused, I ask you if this material is actually compatible Linux.

  See you soon!

  Hi, as explained in RIO for Linux (http://www.ni.com/download/ni-rio-14.0/5027/en/) driver:

  14.0 driver NOR-RIO for Linux provides Runtime support for devices OR RIO Scientific Linux 6.x, Red Hat Enterprise Linux 6.x and 7.x and openSUSE 12.x and 13.1. Please see the file Readme for the full operating system supported.

  This means that you can use the card PCI 7851R in a Linux OS computer is compatible such as Red Hat Enterprise.

  Good day

• NOR PCI-6010 unknown can't find drivers

  Sorry for this simple question.

  We have a PCI-6010 in a Windows 7 machine.  DAQ MAX v5.5.0f0 running.  Device Manager sees it as an unknown device.  DAQ MAX sees it as "Windows was not a driver associated with your device" the guy who said in a said it installed perfectly.  Since then, he has installed a USB 3.0 PCI express.  I tried to reload the driver of all the ways that I never did in the past (he never finds the drivers even on the Driver DVD) and is still not recognized.

  Anyone can remember by the missing piece of the puzzle?

  Thank you

  Paul

  The version of MAX is not relevant. You must install DAQmx and if you do not install, give the version number if you continue to have problems.

• Linux for USB/PCIe/PCI drivers

  HI -.

  I'm developing a linux based real-time (using Ubuntu and scientific Linux) platform that uses multifunction Renault or (series E and M). So far, we used sets driver open source such as COMEDI (from RTAI) and analogy (from Xenomai) to interface with these cards, however the latest maps of the X series are not supported by one of them - and development seems to be to a halt.

  I was wondering if NEITHER provides a driver based on linux for these cards. If so, is there a list of cards that it supports?

  Thank you.

  yapatel wrote:

  HI -.

  I'm developing a linux based real-time (using Ubuntu and scientific Linux) platform that uses multifunction Renault or (series E and M). So far, we used sets driver open source such as COMEDI (from RTAI) and analogy (from Xenomai) to interface with these cards, however the latest maps of the X series are not supported by one of them - and development seems to be to a halt.

  I was wondering if NEITHER provides a driver based on linux for these cards. If so, is there a list of cards that it supports?

  Thank you.

  If you are thinking of materials of the X series, offers of OR support only Linux is through a driver based on the sources, the DDK [1].

  In addition to the source code, the DDK also includes documentation on the registers, bit fields and principle of operation for the capabilities of the device.

  The DDK shows how you program a hardware DAQ on any OS. Note that this is different from how you would create a DAQ for any OS driver. In other words, the DDK wants to show what records and fields of the piece in the program and in what order they should be programmed so that they can properly control the hardware. The DDK is not a reference architecture for the driver and kernel programming, but over as executable documentation.

  [1] measurement Hardware Driver Development Kit (DDK) fair questions
  http://digital.NI.com/public.nsf/allkb/2D93070A3DDEFD7186256C59007289E6

• (Redirected) Linux drivers from Dell dimesion 4600

  Hi, I'm new to the Forum so if I did something wrong I will fix it with goodness. And I also try to rush toward the door while typing this. I have a dell dimension 4600 with a BONE called Zorin Lite is installed. Its bascically Ubuntu, but my problem is that I have a belkin f5d7000 version 4000 PCI Wireless card and I have no idea how to do to install the drivers. I know that I need to know the chipset, but I can't seem to find it.

  Better for this post in the Forum Linux, here:

  http://en.community.Dell.com/forums/3525.aspx

  Bev.

• 2000-2d13CA HP: another ethernet device drivers controller/PCI device/PCI simple comunication/controller SM Bus

  I just reinstalled windows 7 on my HP 2000-2d13CA lappy, but problems with the following device drivers:

  Ethernet controller

  PCI device

  PCI simple communication controller

  SM Bus controller

  Please help with the procedure

  Hello:

  First install the smbus controller driver and restart the PC.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp56670.exe

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56680.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp64801.exe

  PCI simple communication controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp56675.exe

• Impossible to install network drivers and pci drivers

  Hello

  Today, I bought a new laptop, HP 255 G3. Freshly installed windows 7 64 bit and started installing the drivers for it. Most of them said "minimum requirements has not met" and they do not complete the installation. I check the FAQ on the HP website and it said that this means that the software installation is not necessary.  I proceeded to install network controller.

  But it just wotn work. I install it properly and everything. In Device Manager it says that my network controller and my PCI device are not properly installed, they have a yellow sign next to them.

  I followed the instructions to install driver from the HP Web site, properly entered on my version of Windows and all, but I don't know what to do. Help, please.

  Model: K3X21EA

  Series: (deleted content)

  Any help would be appreciated! Thanks in advance!

  You are the very welcome.

  You need these drivers wireless and bluetooth for this model of the wireless card...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6732463 & swItemId = ob_148180_1 & swEnvOid = 4063

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_145288_1

• GNU/Linux drivers for Tecra R840-10 t PT429E-00M007EP

  Toshiba and ForumFolk greetings.

  I am considering buying laptop said, but I will so if I can use it with my "Other Operating System". :)

  I'm guessing that this laptop is relatively new and I can't find reliable information anywhere, so I'll try here first. What I see, Toshiba supplies only drivers are windows ones.

  FREE software drivers only go as far as HD 5890 series for the graphics card. What is the difference between HDMI and DusplayPort?

  I'm completely in the dark about the chipsets are actually used for the other components. Some drivers are supposed to be "OS independent", however, following the links for the 3G driver, I get a list of the 3 drivers/utilities for windows.

  I guess that bluetooth and WiFi (a/b/g/n or b/g/n?) will be more simple and easy to support with FREE software drivers, I hope. The manual stipulates that WiFi and Bluetooth work in the same frequencies, is it? Any risk of actual use (network dropouts, etc.)?

  I don't really like to drive Optics (or speakers and card-slot machines), but which is not being able to use 2.6 and 5.2 GB DVD - RAM?
  All the lights here?

  PS: The Toshiba laptops that do not have vents on the underside are there? It's rather silly to laptop manufacturers.

  As much as I know that the Wlan card is 802.11(a/g/n) Intel supporting BT as well.

  But why you do not use a tool of hardwarediagnostic for Linux?
  That would be the best way to get part of hardware features...

• connect labveiw 8.2 with nor pci-6251

  I have no pci-6251 and its cd driver with labview 8. How can I connect the daq with labview 8.2 and run programs

  Hello

  I can't download the driver of NOR-DAQmx 8.7.1, connect labview 8.2 with NOR-DAQmx PCI-6251...

  Why?

  Please answer...