Linux P2V VM with key-based authentication

Similar Questions

• Dynamic to static IPSec with certificate-based authentication

  I'm trying to implement a dynamic to static LAN2LAN vpn from an ASA 5505 (with a dynamic IP address) to an ASA5520 (with a static IP address)
  I wish I had a small (/ 30) network on the side dynamics which I can connect to a larger (/ 24) network on the static side.
  I also try to use the identity for authentication certificates.

  I produced a root and intermediate CA signed of the intermediate CA with the certificate authority root and then created identity cases for
  the ASAs, signed with the intermediate CA using OpenSSL and imported to a trustpoint

  I tried to use the instructions on:
  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080930f21.shtml
  to configure certificates (replacing MS with OpenSSL) and following the instructions to:

  I tried the ASDM to set up the cert to identity appropriate on the external interface
  [Configuration-> Device Management-> advanced-> SSL settings]

  and establish a connection profile [Configuration-> Device Management-> connection profiles] on both devices,
  setting the part that gets its IP via DHCP static and the side that has the IP permanently to accept dynamic.

  I apply the settings, and nothing happens.

  See the crypto isakmp just returns "there is none its isakmp.

  I don't know where to start debugging it. How can I force the side DHCP to initiate a connection?

  We are sure that both peers are using the same isakmp settings? It seems the policy that uses rsa - sig on one end uses a different Diffie-Hellman group.

• Linux P2V with 12 Pro Workstation

  Hi all

  I am to evaluate Workstation 12 Pro and wanted to know if I can do a P2V of a Linux machine?

  When I try to do it (with VMware Vcenter Converter Standalone installed as client-server), it is said:

  fault. IncorrectCredentialsFault.summary.

  And when I try again it says:

  Unable to connect to VMware vCenter Converter Standalone Server. Make sure that VMware vCenter Converter Standalone version 5.5 is installed

  I installed the latest version of 5.5, so don't know what could be the problem.

  Thanks in adavnce!

  Linux p2v requires interaction with a computer virtual assistance.

  Although it is basically possible with workstation he never was executed

  which means that Linux P2V is only possible when the target is ESXi.

  If you're an experienced Linux user, you can do it manually.

  Google find instructions for most distributios p2v

• 4 converter fails with the error/var on linux P2V?

  4 converter fails with the error/var on linux P2V? All I have is General info... stab in the dark... any help?

  "filesystem copy sh did not exit after 36 minutes" "exception caught during the copy of volume" disassemble slice

  Most likely, you will need enable sparse file support:

  http://www.VMware.com/support/converter/doc/releasenotes_conv40.html#51

  http://KB.VMware.com/kb/1008303

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• How does * (certificate-based authentication) work?

  How does * (certificate-based authentication) work?

  We do * in a company whose phones android and exchange 2010.

  We use the activesync to talk to Exchange via the SSL protocol.

  It works.

  I am documenting HOW it works (on a rather high level).

  I have some information, but would like to know what happens when exchange Gets the customer real auth cert of the device in the last part of the authentication process.

  Exchanges with impatience in its entirety to RFA, since AD (or its related PKI service) created the cert?

  Thank you.

  Mac

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• RVS4000, port forwarding - with - IP-based ACL

  G ' Day!

  I want to know if it is possible to enable port forwarding and paste an IP based ACL on the attacker.

  Scenario:

  I replaced my gateway linux with a RVS4000 and reinstalled my linux machine as a file server with sshd running (now residing on my network behind the RVS4000).

  I have forwarded port 22 on the RVS4000 on my linux server - it works as expected. Now I want to restrict which IP addresses which may connect to port 22, that I can't go to work.

  After I forward port 22 to the linux server I can't control it with IP based ACL. Even if I deny all traffic to port 22, it will leave borrowing at the server linux as long as the port is active.

  I am doing something wrong or if this isn't just intended to work the way I want?

  acl based port will not work with the port forwarding on the device. Once you transfer the port are all allowede to enter this port. the acl will not take effect. I think that what you want to do the port binding is not a feature of this device.

• Feature line with key oracle.jbo.key is not found

  I've seen similar issues posted here but no go in enough detail to help me solve the problem I have just started using Oracle ADF a few hours ago.

  I have connected to our oracle successfully database and set up the display of an entity based on a base table which seems to have worked very well. When I run AppModule I see all the fields of the fine table, but when I change a content of columns to a valid value, and then click validation I get this error: "line entity with key oracle.jbo.key [all fields in table] is not found in the table" even though I don't know why, because it is without a doubt.

  The base table is a table of configuration when a new record is added manually a sequence is triggered to autopopulate the column id of the table. I read that this trigger could be the problem but I'm not sure why, as I'm only an update on an existing id, not create new ones?

  User, tell us your version of jdev, please!

  The framework must be a primary key defined on a table that you want to update. It will be weird if your doe not table a PK. define a pk in the table (if you cannot change the db, you can define the pk in the framework and try again.

  Timo

• ConverterApi, Linux P2V

  How to configure the VM assistance program required for Linux P2V based on ConverterAPI?

  Tos2k

  It is the ConverterHelperVmNetworkParams in ConverterConversionParams.helperVmNetworkParams.

• Linux P2V destination

  Hello!

  I am new to convert and would like some advice.  I have several virtual machines running on a hypervisor XEN on SLES10.  I want to convert to ESXi, but the problem is that the hardware running XEN is the equipment I use for ESXi.

  Here's what I've done so far: I have another VMWare server running (the free server, no ESXi) and I was able to use the onverter to convert one of the virtual machines Windows (from XEN) to the flat hard/vmx files directly and it works now with happiness on the VMware Server.  I guess I can easily convert that to ESXi when the time comes?

  But when I try to convert the Linux VM (on XEN), it will recognize the source machine, but the only option I have for the destination is an ESXi server.  I don't get the option to choose a directory and create the vmdk/vmx files.  And as I said, I do not have an ESXi server to convert until I get this converted XEN VM, because I need the same material.

  I tried to load a PC with the XEN hypervisor and perform my XEN virtual machines it temporarily so I could load the current material of XEN with ESXi, but due to the different processors, I had all kinds of core issues and could not get the XEN VM to load.  I have not any ESXi supported the spare hardware laying around!

  Is it possible to run Linux P2V and creates the vmdk/vmx files directly?  Other thoughts?

  Thanks for any help you can give me!

  Matt

  A Linux p2v must go to ESX as destination.  It is an obligation to perform the conversion process, and there is no workaround solution that I know.

  You have the right idea to get a second server online, XEN or ESXi because that would facilitate what you're trying to do.

  Sorry for the bad news

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Problem with flash based Web pages and re - install windows

  Hello!
  I bought the Toshiba NB100 and use the netbook for a few weeks. At first, it worked all fine and exceeded my expectation.
  However, since one some time he experiences trouble with performance based on flash Web pages such as youtube and etc, which makes it not not possible to stream any video smoothly. Basically, it's a fast-paced photo slideshow :(
  The problem here is certainly not the performance mode, which is set at the maximum.
  I tried to get through this problem with re - install the operating system, which is windows XP, but after transfer of the content produced the DVD on a flash drive recovery, the system does not have a configuration menu. It gives me an error report instead.
  * I put the following qustions you: *.
  * 1. What can be the reason for slow running applications? *
  * 2. I'm doing something wrong when you reinstall windows? * Ts here a simple manual for the resettlement of the op?
  Comments, suggestions and advice will be much appreciated and I thank you in advance.

  So you have installed a generic version of Windows XP?

  You may have forgotten to install the drivers graphics and other critical drivers such as the Intel Chipset driver.

  You see problems in Device Manager?

• HP3521: HPLIP install not on Linux Mint 18 with XFCE

  I try to install HPLIP on a laptop Dell Latitude D510 with Linux MInt 18 with freshly installed XFCE.  Towards the end of the HPLIP installation, I get the following error message:

  Printer driver HP HPLIP installs not entirely:

  RE-CHECKING DEPENDENCIES
  ————————
  error: a required dependency "libtool (libtool - library support services building)" is still missing.
  error: Setup cannot continue without this dependence.
  error: Please manually install this dependency and re-run this installer.

  How 'manually install' this dependence and continue installing HPLIP?  The printer will print with the usb cord but I can't print or scan wireless. The hp-setup 192.168.1.117 command no longer works...

  Thank you.

  apt - get install libtool-bin

  It worked.  HPLIP now installs fine.  The problem is perhaps hplip - 3.16.7.run.  You can check...

• I own 2 TC4200 both with keys product without disks!

  I own 2 TC4200 both with keys product without disks!

  In fact, I have a full set of drives somewhere in my house, but I don't know where.

  Now what should I do?

  Jim

  Hello:

  If you live in the United States, you must call this number you have a notebook of class business.

  1-800-334-5144

  If HP has more discs for your model, you can always get a game from this provider on the link below.

  http://www.computersurgeons.com/p-18001-recovery-kit-380428-B25-for-hpcompaq-model-number-TC4200-tab...

• touch input with key Tip 2

  I need driver for touchsmart IQ512 to win 8 subscribe to the touch input with key Tip 2

  Required Touchdrivers for your system would be available via Windows update. You can even try to download the drivers from the following link:
  http://www.NextWindow.com/assets/files/NWFilter1.4.0.0.zip

• I have Asus EeeBox bought with XP preinstalled. I formatted and installed XP Home different reception of the CD of XP with key EeeBox COA. Is - this perfectly legal according to the policy of Microsoft?

  I have Asus EeeBox bought with XP preinstalled. I formatted and installed XP Home different reception of the CD of XP with key EeeBox COA. Is - this perfectly legal according to the policy of Microsoft?

  It is the key which is the basis of the license, rather than the disc.

• WLC (foreign-anchor), problem with external web authentication-> ISE

  Hello guys

  I am designing a platform for a network of comments, which must be isolated from the LAN, the following facilities:

  • ISE 1.2 (SNS-3415-K9 Cisco)
  • WLC 7.0.230.0 (Cisco 5508 controller)---> foreign wlc
  • WLC 7.0.230.0 (Cisco 5508 controller)---> wlc anchor.

  The PAES tunnel between wlc is successfully completed.

  The wireless client gets the IP address of the anchor wlc (DHCP server).

  Test 1:

  I have set up the ANCHOR WLC with local web authentication (internal), the wireless client is authenticated by WLC and successfully navigate.

  Test 2:

  Configure the authentication web external anchor (ISE) WLC. Configure a user to the portal comments ISE.

  The wireless client gets the IP address of the anchor wlc (DHCP server), attempting to engage not display comments portal.

  Debugging a wireless client, try to connect to the guest network is attached.

  That's right... they have a version of code required minimum supported for this.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."