Liquefy glitching tool after use.

Similar Questions

• How can I get rid of the razor tool after use.

  I am a new user.  I can't get rid of the razor tool after use.  Help

  Press a to return to the normal cursor. or use the tool window.

  

• Problems playing Flash on Firefox after using PC Tools

  Original title: Flash playback after using PC Tools issues

  Yesterday, I launched a free version of Symantec ""PC Tools Registry Mechanic " and click an option that was supposed to clean the registry and speed up my PC." But then, while opening up Mozilla Firefox 15.0.1 I noticed that a lot of things like Youtube, gmail, and other video sites would not load their video player and more most sites still appear for the first time in plaintext and normally appear when I press Ctrl + F5. After doing the system restore and uninstall and install Adobe flash player and firefox, Youtube has been now, loading, but without quality controls and the playback volume. Other video sites gmail etc still load the players. However, when I opened all of these places on Google Chrome, they were all loading normally so I wonder what happens is - this problem with Firefox or with the registry?

  I appreciate your help :)

  Hello

  It seems that there is a problem with Firefox, because if it's a registry problem you would not be able to play videos using Google chrome. The registry cleaner would have probably changed some parameters related to Firefox.

  You can visit this link and check if it helps.
  http://support.Mozilla.org/en-us/KB/fix-common-audio-and-video-issues

  I also suggest checking with the help of Firefox using this link.
  http://support.Mozilla.org/en-us/KB/get-community-support

• Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

  Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

  The best way would be to make sure that your layer is not a background layer: click the lock icon in this case. Then click the icon at the bottom of the layer panel layer mask. This will create a mask that you can refine and not be destructive.

  

• Background layer unlocks and becomes the normal "no flat" layer after using the crop tool in PS CC 2015.1 (a different behavior for older versions of PS)

  Hi all

  I found that it is more difficult to explain than I thought

  I don't like the new behavior in the latest version of Photoshop (CC 2015.1) regarding the way in which the background layers automatically unlock and convert to regular layers after using the crop tool. It's completely different to how things worked in previous versions, where a background layer remained in locked state flattened after using the crop tool.

  I get a LOT of images and this change has added an extra step to each image that I harvest, because I flatten the layers after cropping before saving the image. I looked through the preferences but cannot find a way to change this new behavior. Am I missing something?

  Thanks in advance for your help

  See if checking Delete the cropped Pixels in the tool options makes a difference.

  

• Spit Lightroom 4.3 when using the brush after using the red eye tool

  I bought Lightroom a few days ago. I was traveling so I didn't have the time to 4.3.

  The version shipped with the disk (4.1) worked like a dream. I downloaded 4.3 yesterday and I couldn't be sadder. First of all, I noticed that it cause the 'root' to use more CPU, which means that it does not use the CPU for Lightroom itself. More demand is usually and significantly slower than the original one.

  Today, I used the red eyes for the first time, and I can't just brush top unless it crashes! It is simply impossible. I rebooted. Upgrade my Mac OS 10.7.5...  No use. I even uninstalled and reinstalled again. I was forced to do all my first edit in there usinf the brush, then use the tool red eyes as the last step. But any time that I commit the brush after using the red eye tool, it crashes instantly

  It seems something funny on your establishment for sure that there is not a wide spread thing.

  What exactly is your establishment and where are the various files located - catalogue, images, etc.

• AE crashes after using the camera tool

  Hello!

  I currently have a major problem with my Adobe After Effects, my problem is that I seem to be getting a very annoying error when I use the camera tool after you apply a CC Particle World (I don't know if it's just the camera tool which does not work or if it is a combination!)

  The error is roughly the same as that of the thread I linked below, I read it but I do not receive my answer, then maybe someone could help me? The rest of the package works great!

  http://forums.Adobe.com/thread/660078?TSTART=60

  A picture of my mistake itself:

  http://i42.Tinypic.com/28u5zxd.jpg

  Also, a picture of my dxdiag, if this is useful

  http://I39.Tinypic.com/2vx4l1h.jpg

  Video card is a Nvidia GeForce GT 540 M

  Thanks in advance,

  Casper

  Is your AE correctly updated? There was a bug in the world of particles at a given time and it has been fixed in a day.1 updated. I always forget it's in CS5 or CS5.5...

  Mylenium

• Should I update all the files from the Toshiba site after using the recovery CD

  I just used my recovery CD and update the Windows Update System.

  The question is: should I update all files in the files on this site download section as well?

  Usually after using the Toshiba Recovery CD everything should works and works correctly
  To my knowledge from time to time Toshiba has released new version of some tools or drivers. For example the BT stack will be developed all the time.
  But I think that if you have any problems with your system and peripherals, then you don't need t to update anything.
  Small is my opinion...

• Significant decline in performance on the GRE tunnel after using cryptographic protection

  Hi all

  I have two G1 RSR (1811 and 1812) who have a GRE tunnel between them.

  Without any encryption protection I received about 3.6 MB/s in regular transfers of Windows SMB. After using cryptographic protection of the tunnel I'm now only 2.7 MB/s transfers of same.

  No idea as to why this is?

  My conclusions:
  According to this http://www.cisco.com/web/partners/downloads/765/tools/quickreference/vpn... the AES crypto fixed return of the 1800s is 40 MB/s.
  The increase in overhead of cryptographic protection shouldn't be the problem I tried to test the transfers on the tunnel without protection and 'ip tcp adjust-mss 800' of the tunnel. There was only a small performance drop here, not as much as with the crypto.
  I tried several sets of cryptographic transformation, they all give the same performance as long as they are made in the material.
  ISAKMP is always done in the software? I can't get it to show its is done at the hardware level, regardless of isakmp policy.

  IP MTU on both interfaces of tunnel are 1434 with cryptographic protection.

  My config:

  crypto ISAKMP policy 10
  BA aes 256
  sha512 hash
  preshared authentication
  Group 20
  isakmp encryption key * address *.
  !
  Crypto ipsec transform-set ESP-AES256-SHA esp - aes 256 esp-sha-hmac
  transport mode
  !
  Profile of crypto ipsec VPN
  game of transformation-ESP-AES256-SHA
  !
  Tunnel10
  IP 10.251.251.1 255.255.255.0
  no ip redirection
  no ip proxy-arp
  load-interval 30
  source of tunnel FastEthernet0
  tunnel destination *.
  tunnel path-mtu-discovery
  Tunnel VPN ipsec protection profile
  !

  Output:

  ISR1811 #sh crypto ipsec his
  Interface: Tunnel10
  Tag crypto map: addr Tunnel10-head-0, local *.

  protégé of the vrf: (none)
  ident (addr, mask, prot, port) local: (* / 255.255.255.255/47/0)
  Remote ident (addr, mask, prot, port): (* / 255.255.255.255/47/0)
  current_peer * port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: 683060, #pkts encrypt: 683060, #pkts digest: 683060
  #pkts decaps: 1227247, #pkts decrypt: 1227247, #pkts check: 1227247
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  Errors #send 0, #recv 0 errors

  endpt local crypto. : *, remote Start crypto. : ***
  Path mtu 1500, mtu 1500 ip, ip mtu IDB FastEthernet0
  current outbound SPI: 0x8D9A911E (2375717150)
  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:
  SPI: 0xD6F42959 (3606325593)
  transform: aes-256-esp esp-sha-hmac.
  running parameters = {Transport}
  Conn ID: 45, flow_id: VPN on board: 45, sibling_flags 80000006, crypto card: head-Tunnel10-0
  calendar of his: service life remaining (k/s) key: (4563208/1061)
  Size IV: 16 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:
  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0x8D9A911E (2375717150)
  transform: aes-256-esp esp-sha-hmac.
  running parameters = {Transport}
  Conn ID: 46, flow_id: VPN on board: 46, sibling_flags 80000006, crypto card: head-Tunnel10-0
  calendar of his: service life remaining (k/s) key: (4563239/1061)
  Size IV: 16 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:
  outgoing CFP sas:

  ISR1811 #show in detail his crypto isakmp
  Code: C - IKE configuration mode, D - Dead Peer Detection
  NAT-traversal - KeepAlive, N - K
  T - cTCP encapsulation, X - IKE Extended Authentication
  PSK - GIPR pre-shared key - RSA signature
  renc - RSA encryption
  IPv4 Crypto ISAKMP Security Association

  C - id Local Remote I have VRF status BA hash Auth DH lifetime limit.
  2015 * * ACTIVE aes sha5 psk 20 12:42:50
  Engine-id: Conn-id = SW: 15
  2016 * * ACTIVE aes sha5 psk 20 12:42:58
  Engine-id: Conn-id = SW: 16
  IPv6 Crypto ISAKMP Security Association

  Use of CPU for the transfer with crypto:

  ISR1811 #sh proc cpu its

  ISR1811 09:19:54 Tuesday Sep 2 2014 THIS

  544444555555555544444444445555544444555556666644444555555555
  355555000001111133333888884444444444333333333377777666662222
  100
  90
  80
  70
  60                                          *****     *****
  50 ****************     **********     ************************
  40 ************************************************************
  30 ************************************************************
  20 ************************************************************
  10 ************************************************************
  0... 5... 1... 1... 2... 2... 3... 3... 4... 4... 5... 5... 6
  0 5 0 5 0 5 0 5 0 5 0
  Processor: % per second (last 60 seconds)

  ISR1812 #sh proc cpu history

  ISR1812, Tuesday 09:19:24 Sep 2 2014 THIS

  666666666666666666666666666666666666666666655555444445555544
  777888883333344444555555555566666777770000055555777776666666
  100
  90
  80
  70 ********          ********************
  60 ************************************************     *****
  50 ************************************************************
  40 ************************************************************
  30 ************************************************************
  20 ************************************************************
  10 ************************************************************
  0... 5... 1... 1... 2... 2... 3... 3... 4... 4... 5... 5... 6
  0 5 0 5 0 5 0 5 0 5 0
  Processor: % per second (last 60 seconds)

  I think that this performance is what you should get with the legacy 18xx SRI G1. But the performance degradation is perhaps really a little too high.

  For ISAKMP, there is no problem with that. The amount of protected data is too small to have one any influence.

  As a first test, I would remove the GRE encapsulation by setting "mode ipsec ipv4 tunnel" on the tunnel interface and compare if the results improve.

• Try to reinstall Adobe CS6 on my computer after using the creative cloud

  I'm trying to reinstall my Adobe CS6 Design and Web Premium (specifically Photoshop and Illustrator) on my computer (Mac) after using CC for free by the school. I just got the "Subscription expired" notice from the creative clouds, so I tried to put my disk to download what I had previously used, but I still get the membership expired notice when I try to launch the program despite going through all the steps and correctly put it back on my computer.  I'm not trying to continue using CC, only CS6.  Any help would be greatly appreciated!

  Cloud of reading resumes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

  -includes information on how to stop the Update Manager or the clouds to run at startup

  -above is for Windows, but can help with ideas for Mac

  In the vacuum after you have uninstalled and before reinstalling assistance is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• Fallacious rectangles or "glitch" appear when using Camera Raw.

  When I use Camera Raw, I see fake or rectangles 'glitch' appear when using various tools of exposure, the adjustment brush setting, etc.. To work around the problem, I set a tool that I use as an exhibition or a brush until the rectangles disappear, then try to accomplish my initial task. Although annoying and disruptive to work, the question so far seems innocuous from a real perspective of corruption.

  The question goes far (stops going completely) when I uncheck the box "use Graphics Processor' Raw.

  My guess is that it is a matter of driver/GPU. If someone knows something about this, would be great to hear, otherwise I just wanted to share the info in case someone else has the same problem arise.

  Note, I have a relatively new Intel 970M, latest drivers and a lot of memory... This isn't an 'old system' or lack of memory type of question.

  Here's an example of what I see (red arrows point to the issue but are not themselves part of the question):

  

  Problem goes away when I uncheck the following...

  

  Some info sys...

  NVIDIA GeForce GTX 970 M 372.54 driver version.

  Adobe Photoshop Version: 2015.5.1 20160722.r.156 2016/07 / 22:23:00:00 CL 1083377 x 64

  Camera Raw 9.6.1.631

  Operating system: Windows 64-bit 10

  System architecture: Intel CPU Family: 6, model: 14

  Physical processor count: 4

  Number of logical processors: 8

  Processor speed: 2712 MHz

  Built-in memory: 49110 MB

  Free memory: 25204 MB

  You have your answer. That's what a lot of people have had to do when their graphics card does not work well with the cab. No solution other than what you were doing.

• Is it just me or does Photoshop CC remembers what tools I used last when I close and reopen the program?

  Hi all!

  I have years of experience using Photoshop, and I have used CC for quite a while now. Last year, I used a different computer more powerful than I have now, but I don't remember ever having this problem. It is less of a problem and more of a preference, but its still slow me down. Whenever I open it Photoshop (I only noticed this in Photoshop until now) my workspace is saved, but my toolbar doesn't remember the last tools I was using.

  For example: if I've been using the polygonal lasso tool, then close Photoshop and reopen, it is by default in the standard lasso tool.

  Does anyone know if there is a way to save what tools were used for the purpose or more often?

  Thanks in advance!

  [Moved from the living room Forum for specific forum - Mod]

  Photoshop CC 2015 still remembers the tool, I'm the last one used. This looks like a problem suddenly, and many times they can clear up by a tidal wave of preference.

  Try to reset the Photoshop preferences file:

  Manually; course may be cancelled:

  http://TV.Adobe.com/watch/the-complete-picture-with-Julieanne-Kost/how-to-reset-Photoshop-Le file-Preferences-cs6s.

  Fast; cannot be undone:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Press Cmd + Opt + shift then launch Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

• the share button don't work and need to leave the app after used

  the share button does not work and I need to force quit the app after used

  Any individual plugin or all of them?

• After using groups of tabs earlier today, now whenever I close FF with more than 1 open tab, FF don't ask me to confirm before closing

  After using groups of tabs earlier today, now whenever I close FF with more than 1 open tab, FF don't ask me to confirm prior to closing. FF always asked me to confirm in the past and no settings have been changed before you try tab groups. Then when I open FF it again all the tabs I had open are still there. I tried refreshing FF and erase history, but that did not work. It's almost as if FF think windows and tabs I have open are a group of tabs, and he won't let me get rid of this group. How to stop groups of tabs now that I have them? Or is there something else? None of this was going on until this morning, I played with tab groups. I was curious what it was - it's going to make me kill one of these days lol.

  Note that using "show my windows and tabs from last time" as the start setting will also prevent Firefox to display an alert when you close the window.

  • https://support.Mozilla.org/KB/Options+window+-+General+Panel