List Code Question

Similar Questions

• How can I add a response at the end of each point of the issue in a list of questions and send back to the sender?

  I have emails that require some points to address such as "Please fix leak in the bathroom sink' and then the next line will be another application and so on. I would like to answer each question at the end of each line with a response (preferably in a different color to stand out police) such as "Yes - will fix" or "that cannot be done" or "you'll have to fix that yourself." So, I want to send this reply to the original sender.

  It is probably easiest to copy and paste the initial list of questions in your answer, first of all and then add your comments.

  If you have the problem that the list numbers change when you try to add your comment about a new line, try to make your line breaks using shift + enter instead of the entry.

• List of questions to verify the performance and maintenance?

  Is there an online list of questions to verify the performance of Vista SP 1?

  A reasoning to install SP2 or SP3 immediately?

  I had to do a direct upgrade from XP sp2 to Vista and seems to work very well.

  Thank you

  Kenny

  Sunday, August 8, 2010 13:13:36 + 0000, PCKenny wrote:

  Is there an online list of questions to verify the performance of Vista SP 1?

  See Lorien - good suggestions.

  A reasoning to install SP2 or SP3 immediately?

  Yes. Service Packs resolve problems and improve safety. You should
  be always up to date with them.

  Ken Blake

• How long a displayed question appears on my list of questions?

  Is there a waiting period. Questions are moderated before posting?
  I can't find my question on my list of validated questions.

  MSwhip

  Contributions

  16 questions
  10 answers
  

• Apple does not list a country the list code to add trust number (validation of 2 steps)

  I used the gate 2 years with my number + 849xxxxxxx

  Today I turn off validation of 2 steps to config something, so I tried to reactivate it.

  Then, I realized that Apple updated the list of country code, and this is totally wrong with the Viet Nam.

  It is + 848 (Viet Nam) instead of + 84 (Viet Nam) as before.

  + 848 is a new type of phone number here in the Viet Nam, many people here still use the old kind of number like me (+ 849), not the + 848. That's why I can't re - activate 2 validation of steps again.

  My friends also had the same problem as mine. I think that Apple should give the country code option to + 84 (Viet Nam), not the + 848 (Viet Nam) as soon as POSSIBLE, now that my account is not protected because of this error.

  Thank you.

  I totally agree with you.

  I have not even worse, I can't receive the verification Code when loging itunesconnect.apple.com, so I can't download the new version of my application.

  I hope that Apple will fix it as soon as POSSIBLE.

• OTP-S590 remote code question

  Just set up my S590 and it works very well.

  I have connected the S590 to my stereo system to Sony DAV - FC7 (via composite) for which I lost the remote control.

  The remote control for the media player that I used until I'm the S590, who was a Philips DVD player with USB connection, allowed me to control the levels of the audio output of the player. This is possible using a custom firmware.

  Now the remote S590 has a volume knob and I have a few questions:

  1. can I program the remote S590 to control the volume of the composite output of the S590 itself?

  2 of universal remote would. what type you recommend which allows me to use the S590, DAV - FC7 and my Sharp TV?

  Thanks in advance!

  Hello Tom

  The volume button on the Blu - ray player's remote control is used to control the TV volume.
  The player's remote control cannot be programmed to control the volume of the car radio.

  You can use the code 18 to program the supplied remote control to the player to control the Sharp TV.

  To buy a universal remote, you can contact the nearest Sony dealer.

  Kind regards

  Colby

• Windows activation code question

  I woke up this morning to the computer asks me a product key Windows activation code after an update of service. I entered the product key off the coast of the sticker from original manufacturers on the back of the computer, but it tells me that the code is not valid. I double checked twice the number. Someone at - it advice for me. I enter the sharps. Do I need to do or leave them? I'm perplexed as to what I could hurt the number is right there at the back of the computer. I need help!

  Hello

  Please follow the steps in the links below and let know us the status of the issue.

  Resolve activation problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  How to activate Windows Vista:

  http://support.Microsoft.com/kb/940315

   

   

  Activating Windows: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

   

   

  For more information:

   

  Genuine Windows: Frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows/help/genuine/FAQ

   

   

  How to contact a Microsoft Product Activation Center by phone:

  http://support.Microsoft.com/kb/950929

   

   

  I hope this helps.

• code question flow aid

  Hello

  This question about the following code

  public static boolean isParamsOK(String _dbName, String _projectName) {
          // TODO Auto-generated method stub
  
           String dbName = _dbName;
           String projectName = _projectName;
  
              if(dbName==null){
                  errorDialog("dbName can not be null");
                  return false;} 
  
              if(dbName.equals("")){
                  errorDialog("dbName can not be empty");
                  return false;}
              //Code A
              if(projectName==null){
                  errorDialog("projectName can not be null");
                  return false;}//end of Code A
              //Code B
              if(projectName.equals("")){
                  errorDialog("projectName can not be empty");
                  return false;}//end of Code B
  
              // if not nothing occur above all fine :)
              return true;
  
      }// end of isParamsOK
  

  When I share Code A and B of the Code. I'm getting a NullPointerException.

  Can someone explain the reason please.

  Thank you in advance.

  Looks like your projectName is null when you get that. Verification that A don't, you're preventing him from getting to the OE to B by actually checking if it's null first.

• Upgrade for the WLC code questions

  We 6.0.132 (lastest) WCS and our controllers are on 4.2.130, we now to upgrade to deal with sometimes, but don't want to capwap yet.

  Question 1: what is the last exit LWAPP code?

  Question2:Whats the differences between 4.2.207 (support page for cisco said it's the latest version), but it has same releases with ie 6.0 how it works it is very confusing workout a way to upgrade to higher versions

  See you soon

  Hi Tyrone,

  I'm not an expert on the management of versions, but here are some basic in response details

  at your request

  4.2.207 is the last version on the Train of 4.2 and is without doubt an excellent choice

  If you are avoiding CAPWAP for now. You will see in the link below which

  There are several 'simultaneous' for the WLC Trains (and most of the Cisco product). People

  were not big fans of the first Trains 5.x (quite buggy) and was introduced to CAPWAP

  in 5.2 and the attacker thus is why 4.2.207 seems to be a good choice for you

  In the later version or 5.2 controller software version, Cisco lightweight access points use the IETF control and commissioning of Access Points (CAPWAP) standard protocol to communicate between the controller wireless and other points of light access on the network. Versions software controller before 5.2 use the Lightweight of Point access (LWAPP) Protocol to these communications.

  CAPWAP, which is based on LWAPP, is a standard and interoperable protocol that allows a controller manage a collection of wireless access points. CAPWAP is implemented in version 5.2 software controller for these reasons:

  *

  To provide a path for upgrade of Cisco products that use LWAPP generation Cisco products that use CAPWAP
  *

  To manage RFID readers and similar devices
  *

  To allow controllers to interoperate with third party access points in the future

  LWAPP compatible access points can discover and join a CAPWAP controller, and conversion to a controller of CAPWAP is transparent. For example, the process of discovery of controller and firmware download process when using CAPWAP are the same as when you are using LWAPP. The only exception is for layer 2 deployments, which are not supported by CAPWAP.

  You can deploy CAPWAP and LWAPP controllers on the same network. The CAPWAP compatible software allows access points join to be a controller running CAPWAP-LWAPP. The only exception is the Access Point Cisco Aironet 1140 series, which takes in charge only CAPWAP and joined so only controllers that run CAPWAP. For example, 1130 series access point can reach a controller running CAPWAP or LWAPP considering that access of series 1140 point can join only a controller running CAPWAP.

  http://www.Cisco.com/en/us/products/ps6366/products_qanda_item09186a008064a991.shtml

  4.2.207 was released on July 24, 2009 which makes the new second version available on any train.

  http://www.Cisco.com/en/us/products/ps6366/prod_release_notes_list.html

  See you soon!

  Rob

• Lightroom 4 GPS / country Code questions

  1. If you import an image with GPS data, Lightroom 4 will add the appropriate values for the secondary, city, State/Province, country and country Code.  Is it possible to add this data to existing files while retaining history?

  You can write metadata to the files ([Ctrl] [S]), delete these files from Lightroom and then synchronize a file to re-import them.  With all the changed settings but without their history re-imports.  Is there another way that keeps the story?

  2 is a link to the google map available for a GPS to a photograph?

  In Lightroom 3, you can click on the GPS location and that you access a Google map with a web link specific page that you could then publish, for example on a blog.  You can copy and paste the GPS location on a Google map page, but it does not give you a web link that you can use.

  3 is there a way to publish a map?

  Is there (or will there be) any way to export a map page, say to JPEG?

  Is it possible to take a screenshot of a map page and publish, for example in a blog?

  1. There is no way to save the history in the file.

  2. Yes, hold down the Alt/Option key when you click on the GPS field in the card module.

  3A. isn't that I know, and I was expecting such a feature have been documented if possible.

  3B. at the present time, is not what power or power does not happen in the future.

  Good question 3(c). It's actually what Adobe, the authors of the book, the bloggers, reviewers have in fact already since beta Lr4 came and for long before avery that.

• Add animation code question

  I try to add code for the animation to a layer that has a tag on it clicks. I feel like I'm close, but I'm missing something. Here's what I have so far and I've linked a .fla CS4 basic file can better illustrate my question.

  var loop = 0;
  
  clickTAG_btn.onRelease=function(){
  getURL(clickTag,"_blank");
  }
  
  mc_complexButton.onRollOver=function(){
  this._parent.play(1);
  }
  
  mc_complexButton.onRollOut=function(){
  this._parent.gotoAndStop(10);
  }
  

  My "clickTAG" coding is correct. But I'll try to have the mc_complexButton to turn when you hover over the button "clickTAG". It does not work unless I hide the layer that contains the button "clickTAG". I'm sure I'm not referencing the mc_complexButton correctly, or of course what numbers should be in parentheses after him. Thanks for any help or an explanation.

  http://DL.dropbox.com/u/24097164/Valentine_testheart.fla

  Just for reference, I will add animation to the heart in the final version, the circle is simply a placeholder to get the correct code.

  use:

  var loop = 0;
  
  clickTag_btn.onRelease=function(){
  getURL(clickTAG,"_blank");
  }
  
  clickTag_btn.onRollOver=function(){mc_complexButton.play();}clickTag_btn.onRollOut=reverseF;
  
  mc_complexButton.onRollOver=function(){
  this._parent.play(1);
  this.play();
   }
  
  mc_complexButton.onRollOut=function(){
  this._parent.gotoAndStop(10);
  reverseF();
   }
  function reverseF(){
  
  mc_complexButton.onEnterFrame=function(){
  this.prevFrame();
  if(this._currentFrame==1){
  delete this.onEnterFrame;
  }
  }
  
  }
  
  

• Test Code Question SMART diagnosis HPE 150 t PC with Windows 7 64 bit

  HPE 150 t PC Windows 7 64 bit

  The SMART monthly test States: WARNING: for an indefinite period. State Smart information indicate the status code 297Ch. Does anyone know what this means?

  "Inderterminate" status means that the utility could not perform the test. correctly. It is most likely a software problem and is not a problem with your system.

• List of questions my ThinkPad Tablet

  Bought the TPT (183822U) in November.  Initially, I used for almost a month and was generally dissatisfied.  Here's why.

  1. UI are not reliable.  It took several keys to engage often enough so he could have disruptive effects.  Swiping and scrolling are slower and jerkier than expected.
  2. Rate of life and change of battery are much worse than what I expected.
  3. Accidents of the constant application.
  4. The hardware buttons are kind of annoying.
  5. Video playback was not as impressive as I had hoped (my expectations perhaps not reasonable).
  6. Quality of the app has been less than I'd hoped.  I have not found convincing enough applications to use a Tablet when I got a smartphone and a laptop ultralight (MBA).  Maybe I wasn't a person of the tablet.
  7. I didn't have the digitizer pen (I bought the 16 GB TPT).

  These 5 questions, the first three were reasonable and that I considered to be real defects.  I tried to send it back, but my RAM went to my junk mail, and I missed my window.  I thought that he had been denied because he was technically a month.

  Then, after having let stand for 2 months, I decided to try again to kiss her.

  I bought a case and a pen.

  The pen changed things a lot.  It is not perfect and everyonce in a while the sensitivity goes dead for a second, but in general, it was a great feature and really brought the TPT to life for me.  I found the best applications were Writepad and pen, and I started to use both.  AutoDesk Sketchbook has been disappointing.  You've got palm rejection something fierce (I'm not wearing a glove to draw, it's stupid).

  3 weeks to really use it, I was starting to get into a manual, which was gratifying.  Most of it has been based around the use of the stylus, but also of Evernote, remember the milk, browsing the Internet, Email (I could live with the problem of the apostrophe), the E-reader app for my PDF, and Netflix library has completed my reguar use.  I always liked the presence of the SD card reader and USB expansion capability.

  But it was a short 3 weeks.

  Now, the tablet will not charge is no longer through the Micro USB connector.  I do not have a dock, but am concerned about buying one because of throwing good money after bad.  I will try a new cable when I go home, where I wore it out (charging every night), but I doubt that's the problem.  It is not a very stable connection, years light behind the iPad in this regard.

  P.S. I can't understand how to upgrade the thing.  I'm on 75_US and update system still reports no updates found.  Is this fair?

  
  

• A list of questions {known, resolved} by the version of the OS?

  Hello

  More in this BB dev, it can be irritating to bash your head against something, and only after a lot of research read an excerpt in a post somewhere that 'it' is resolved in a later version of the operating system.

  Does anyone know of a list of issues resolved for each revision of the OS?

  Kind regards

  You can download and read the document 'Release Notes and known issues list' of each API.

• BlackBerry Smartphones very strange list Contact question (Blackberry 8900)

  Hey guys,.

  Good so my problem is this. I have just recently today my BB8900 and am very happy with it, except for a small problem; my contacts list doesn't seem to work, be it!

  What I mean by that is, I saved all my contacts on my media card in my old handset (like the BB uses MicroSD) as well as all my songs/Photos. The songs and photos themselves attached to the BB with absolutely no problems whatsoever, but the contacts are not just do it!

  I also kept copies of all my stuff on my PC so I tried to do it via the transfer; but when I open my files of BB and click on "other > Contacts" all my contacts appear, so copy them via hard transfer do not seem to work either...

  Then, I went to the only other option available to my knowledge and began to fill manually the contacts list. I filled out the name and number, went to 'Save' - but alas my Yearbook says still * Contacts * of no.... I'm more frustrated!

  Could someone Please help me!

  Thank you very much in advance!

  Open your address book again, tap Menu > filters and uncheck all the filters that you have controlled.

  On the other subject, even once, you can't use your MicroSD to store contacts or import of the MicroSD card in the address book.