List index

Similar Questions

• can't load games run time error list index out of bounds

  I support the game
  Go through acceptance, for example windows next
  is the end and the foregoing notice arrives ' runtime error 62:2395 list index out of bounds ".

  I always downloaded from this show and didn't have problems now

  Hi Terrinicholson,

  1. what game you are trying to download?

  2. what web browser do you use?

  3. This only happens with a specific Web site?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can read the following article and check if it helps:

  The problems of games online using Internet Explorer

• Message "List index out of bounds" appears when I try to get a file from the FLAME of my E: drive. What should I do?

  I use Apophysis7x15 c.9 fractal generator program that I downloaded years ago and have used every day since I downloaded it. It creates. FLAME files to save on my E: drive. Today I tried to recover the files already stored on the flash drive to complete the work on the image I have for years, and he gave me the message "List index out of bounds" and refused to access my folder. What can I do to fix this? The last time that my computer had an update was on 21/09/2012 from Microsoft for the Microsoft Windows security update. I used these files several times since then.

  [Moved from comments]

  Hello

  Look for when I try to make it is an error "List index out of bounds-1. How can I fix this?

  at the bottom of this page:

  http://apophysis.xyrus-Worx.org/

  Hope this helps,
  Don

• HP Deskjet 1512: List index out of bounds for Deskjet 1512

  Try to print lists of names of files and their size, developed by STG printed case, results in an error message of "List Index out of bounds".  The printer is a HP Deskjet 1512. Using Windows 7.

  All solutions?  Thanks in advance.

  Thanks for your reply. My problem was eliminated by mearly restart the program.  I would have thought this before spending several hours looking for a solution in my HP printer setup.

• List index out of bounds (3) - error message of AVS video Converter

  Hello.  When I try and run my AVS Video Converter (8) I now have the error "List index out of bounds (3)" above.  This has only started happening after the best part of two years of successful use of the program.  Any ideas/suggestions?

  Thank you (in preparation),

  Brett

  You can try to contact the support of the AVS for assistance:

  http://support.AVS4YOU.com/login.aspx

• While (list ($index; $value) = each ($array)) {echo "Wtf?" ;}

  Hello comrades!

  I'm new to PHP and now I'm stuck at list(); and each(); functions.

  Can someone explain to me the meaning of:

  list ($index; $value) = each ($array) ?

  I understand that the meaning of the variables in the present code:

  $array [index] = 'value ';

  But what is the meaning of the equation in the parenthesis of the cycle while ?

  Thank you people!

  DissidentPJ

  ya that's how to use it. I had to search what each() done haha coz I do not use it

• Drop Down List index - my script does not recognize the leader line in my function

  Community AE script-

  I'm a designer not a programmer naked with me.  I just try something simple, no baby and I cannot for the life of make me this simple script to work.

  I saw the script adds FAST and thought I would try to imitate this script for me as a challenge.  I watched videos of David Torno on Pro video Coalition and a simple example Script UI.  I searched for my answer on these here forums and tried to combine a simple script to examples within these forums and may not have to recognize clues to my drop-DOWN LIST down.  Here's my simple script:

  {

  function myScript (thisObj) {}

  function myScript_buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ('palette', 'Add', undefined, {resizable: true});

  res = "group {orientation: 'row', alignment: ["fill","fill"] alignChildren: ["fill","fill"],------}»

  groupOne: group {orientation: 'row', alignment: ["fill", "fill"] alignChildren: ['fill', 'top'],------}

  myStaticText: StaticText {text:'New:'}, \

  myDropDownList: DropDownList {properties: {items: ['solid', 'Light']}}, \

  },\

  groupTwo: group {orientation: 'row', alignment: ["fill", "fill"] alignChildren: ['fill', 'top'],------}

  MyButton: button {text: 'Add'}, \

  },\

  }";

  myPanel.grp = myPanel.add (res);

  Default values

  myPanel.grp.groupOne.myDropDownList.selection = 0;

  myPanel.grp.groupTwo.myButton.onClick = myButtonClick;

  Design of Control Panel

  myPanel.layout.layout (true);

  myPanel.grp.minimumSize = myPanel.grp.size;

  Make the resizable Panel

  myPanel.layout.resize ();

  myPanel.onResizing = myPanel.onResize = function() {this.layout.resize ()};

  Return myPanel;

  }

  function myButtonClick() {}

  var app.project.activeItem = myComp;

  If (myComp! = null & & myComp instanceof CompItem) {}

  If (myPanel.grp.groupOne.myDropDownList.selection.index == 0) {}

  myComp.layers.addSolid ([0,0,0], "MySolid", myComp.width, myComp.height, 1)

  } Else if (myPanel.grp.groupOne.myDropDownList.selection.index == 2) {}

  myComp.layers.addLight ("Light", [myComp.width/2, myComp.height/2]);

  }

  }

  }

  Make a floating window

  var myScriptPal = myScript_buildUI (thisObj);

  If ((myScriptPal! = null) & & (myScriptPal instanceof window)) {}

  myScriptPal.center ();

  myScriptPal.show ();

  }

  }

  myScript (this);

  }

  If I comment out the lines

  If (myPanel.grp.groupOne.myDropDownList.selection.index == 0) { and If (myPanel.grp.groupOne.myDropDownList.selection.index == 1) { }}

  the script will add the SOLID and LIGHT.  But it will never work with these active lines - Add button does nothing.

  I could just make use of onChange with the drop-down list, but I want to understand how onClick actions of connection in the drop-down list.

  I copied this piece of the forum script and modified to work with my script, but nothing seems to work:

  buttonOne.onClick = onButtonOneClick;

  function onButtonOneClick() {}

  If (myPalette.dropdownlistOne.selection.index == 0) {}

  to do this

  } else {}

  This instead

  }

  }

  Can someone take a look at my script at the top of the page and tell me why this won't work?  I pretty much pulled out the last piece of hair I have on this - simple problem?

  Thank you in advance.

  Your click of button function does not know what "myPanel. You could do something like this inside the function:

  var this.parent.parent.parent = myPanel;

  There are other ways to do it, maybe as a global variable that maintains the reference of the Panel.

  In addition, your second if looking for selection.index == 2 instead of 1.

  Dan

• Lists index is not updated when topic names are changed.

  I had an existing topic for which keywords had been seized.

  Origin name of topic: "Presentation stopped at Non-Ricoh sellers purchase."

  New name of the topic: "Presentation Purchase Orders.

  So I changed the title and the name of the topic...

  

  (See "Toshiba" below for this topic)

  

  When I generate the project, the index still shows the old file name...

  

  What should I do to get the file name to be updated in the Index?

  Thank you!

  Tim

  Hi Tim

  I think you should probably open the pod of the Index Publisher. Search for the keyword that links to this subject, then look in the area "for the topics" at the bottom of the basket of the Index. You should be able to change the name you see by editing here.

  See you soon... Rick

• problem with index on a list of variants

  Hi, im working with a variant property list and index property int for the passage of the current 5 days and back temperature seems to work, but it has some problems, first of all, instead of the current temperature, I got 0 and then when I get to the day 4 me sends to the current day, and when I am right now (jsonweather.temp in the list) I spend twice for him , I increase the index on the shot upwards and taper sliding down like that

  Page {
  
  property variant list
  property int index: 0
  
  list: [ jsonweather.temp,
          jsonweather.tempMax1,
          jsonweather.tempMax2,
          jsonweather.tempMax3,
          jsonweather.tempMax4,
          jsonweather.tempMax5 ]
  
  function setIndex(_index){
          index = _index
      }
  function temperatureChanges(index){
          if(_WeatherNow.useFarenheit == true){
              weatherDataTemperature.text = Math.round((list[index])*1.8+32);
         } else{
                weatherDataTemperature.text = Math.round(list[index]);
              }
      }
  
  Container {
          id:swipeContainer
  
          property int swipeThreshold: 100
          property double swipeStartPosX: -1
          property double swipeStartPosY: -1
          property double swipeLastKnownPosX: -1
          property double swipeLastKnownPosY: -1
          property bool swipeStart: false
          property bool swipeMove: false
  
  attachedObjects: [
  PositionSource {
              id: positionSource
              //! Desired interval between updates in milliseconds
              updateInterval: 10000
              //! When position changed, update the location strings
              onPositionChanged: {
                  currentCoord = positionSource.position.coordinate;
                  latitude = Math.round(currentCoord.latitude*1000)/1000;
                  longitude = Math.round(currentCoord.longitude*1000)/1000;
                  console.debug("Latitude: " + latitude, "Longitude: " + longitude);
                  positionSource.stop();
                  // start loading weather data for location
                  jsonweather.getWeatherdata(latitude, longitude);
                  jsonweather.onGetReply(loading.stop())
              }
          },
          ExternalIP {
              id : jsonweather
              onNameChanged: {
                  weatherDataCity.text = name;
              }
              onDescriptionChanged: {
                  weatherDataCondition.text = list2[index2];
              }
              onHumidityChanged: {
  
              }
              onTempChanged: {
              if(_WeatherNow.useFarenheit == true){
              weatherDataTemperature.text = Math.round((list[index])*1.8+32);
              } else{
              weatherDataTemperature.text = Math.round(list[index]);
              }
  }
          ]
          function processSwipe() {
              var horz = swipeContainer.swipeLastKnownPosX - swipeContainer.swipeStartPosX;
              var vert = swipeContainer.swipeLastKnownPosY - swipeContainer.swipeStartPosY;
  
              if (Math.abs(vert) > swipeThreshold) {
                  if (vert > 0) {
  
                      if(index > 0) temperatureChanges(index--)
                      else index = list.length - 1
  
                  }
                  else if (vert < 0) {
                      //swipe up
                      if (index < list.length - 1) temperatureChanges(index++)
                      else index = 0
              }
  }
              if (Math.abs(horz) > Math.abs(vert)) {
              // Moving horizontally: refresh information
              if (Math.abs(horz) > swipeThreshold) {
                  if (horz < 0) {
  
                           loading.start()
                           positionSource.start()
                           temperatureChanges(index)
  
                  } else if (horz > 0) {
                      temperatureChanges(index)
                  }
  
  }
          }
          }
          onTouch: {
              if (event.isDown()) {
                  swipeContainer.swipeStartPosX = event.windowX;
                  swipeContainer.swipeStartPosY = event.windowY;
                  swipeContainer.swipeStart = true;
              } else if (event.isMove() && swipeStart) {
                  swipeContainer.swipeMove = true;
                  swipeContainer.swipeLastKnownPosX = event.windowX;
                  swipeContainer.swipeLastKnownPosY = event.windowY;
              } else if ((event.isUp() || event.isCancel()) && swipeContainer.swipeMove) {
                  swipeContainer.swipeStart = false;
                  swipeContainer.swipeMove = false;
                  processSwipe();
              }
          }
  onCreationCompleted: {setIndex(0)}
  }
  

  This code seems very strange to me...

  if(index > 0) temperatureChanges(index--)
  else index = list.length - 1
  

  If it should not change anything...

  if(index > 0) index--
  else index = list.length - 1
  temperatureChanges(index)
  

  Ditto for increase the index in the code a little later, the.

  I do not say that it is something to do with your problem, that there should be further analysis, but this code seemed to me odd right now.

• Software of self-esteem gets error - index out of bound(-1)

  When I run the Selfmage software it get me "list index out of bound(-1) error '...

  and I have no idea about this error so please help me with it...

  Hello fabdullah127,

  You could try the Compatibility Mode and see if this is useful for you.
  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

  Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  If this does not help, if you are using Windows 7 Professional or ultimate, you can use Windows XP mode and Virtual PC. If you run Windows 7 Home Premium, you will need to check virtualization 3rd party programs to see if the software works on it.

  I hope this helps to answer your questions.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Linking the legends index

  Hello

  I am designing a book containing hundreds of images. Under each image, I would have a number that corresponds to a text in a list/index at the end of the book. How can I achieve in concrete terms?

  I tried to find a method with static captions without success (I may be to halfway to the answer?). Of course, I could type everything by hand, but there is no automatic link between each image and its description. The order - and therefore, the numbers - the images will change several times, as well as texts. Therefore, it is very easy to lose control if done manually by simly type a number and update the index. In addition, if a single image is moving, I can end up with a situation where I have to retype not only this specific number, but all the other numbers like well.I.e., guaranteed human error.

  I hope someone can help me with this problem!

  / H

  The legend could be done in a paragraph style where you apply the numbering of the paragraph style. Then you can set the text of legends like the color of the paper, while the number might have a character style that defines the number like black ink color, for example.

  For the list at the end, generate a Table of contents (there may be more than one table of contents in a document) that acts as an index of end for the photos. Paragraph collected styles will be will carry the title with a new paragraph might be called index_to_images style and color can be defined as, perhaps, the black color.

• Conductive builds a list with the code item.

  I'm stuck, because I need to change the elements of a list with Oracle Forms 6i item.
  Needless to recover a database, I just need to add them programmatically.
  Is there any function to do?
  
  Published by: john 18 July 2012 14:38
  
  Published by: john 18 July 2012 14:39

  Just look in the form Builder Help:

  To add a single element to a list item, use the ADD_LIST_ELEMENT built-in subprogram.
  When you call ADD_LIST_ELEMENT, you indicate which list item will receive the new element by specifying the list name, list index, label, and the value to add.
  In the following example, the value "1994" is added to a list item called calendar.
  Add_List_Element('calendar',list_index,'1994','1994'); 
  

  Or look in the help even for POPULATE_LIST.

• Catalogue/Index of Images in Photoshop CS5

  Being new to using Photoshop CS5 is possible to catalog or create an index of all my images in PS CS5?  For now, I'm backing up my files to cd image is to store off-site, but with many CDs, I don't remember what's on each CD, unless I manual creates a list/index or the spreadsheet.  Someone mentions that PS CS5 is doing this, but I haven't seen any menu that looks like this function.  Is it possible in PS CS5 or do I need to purchase another program to do this?

  Thank you

  Jim

  http://feedback.Photoshop.com/photoshop_family/topics/what_happened_to_the_automate_comman ds_contact_sheet_ii_pdf_presentation_and_web_photo_gallery_in_photoshop

• Error in the loop on the list

  Looping on a series of lists created from form fields generates an error in one of the fields on the form was left blank. The form is a list of the dates of the event start and end times. An event can have a number of times.
  
  When the end time is uncertain, we leave the field blank. However, this therefore reduces the list created from #form.endtime # for lists do not match and there is an error message:
  
  "Invalid list index 2.
  In the function ListGetAt (list, index [, delimiters]), the index value, 2, is not valid as the first argument (this list has 1 elements). Valid indexes are in the range 1 through the number of elements in the list. »
  
  How do you get around this problem? TX.
  
  

  yoman,

  No need for separate forms. Use a meter to number each group of domain names

  
  

  
  

  Then loop through the fields in form on your action page

  
  
  
  ... other fields

  
  UPDATE EventDates
  EventDate SET = "#EventDate #",...

  WHERE EventDateID = #EventDateID #.
  
  

  You must validate the values or use cfqueryparam

• PCTFREE and PCTUSED for index.

  Simple doubt confuse many.
  
  1 why PCTFREE is required as update is performed internally as a deletion followed by insert in the index? Also this PCTFREE can waste space also in block.
  
  2. why PCTUSED is required as a complete block must be free (no key entry) to be re-used anywhere in the structure of the index by listing in free-list index?
  
  -Yasser

  YasserRACDBA wrote:
  Simple doubt confuse many.

  1 why PCTFREE is required as update is performed internally as a deletion followed by insert in the index? Also this PCTFREE can waste space also in block.

  PCTFREE is essentially used for updates of these Null enteries in marketing and now have updated.

  2. why PCTUSED is required as a complete block must be free (no key entry) to be re-used anywhere in the structure of the index by listing in free-list index?

  PCTUSED is NOT used for the index. You can't control how index blocks would be used as as setting limits used again lower in data blocks. Here's a good explanation for the same question asked by yours truly :)

  PCTUSED in the index 0...

  HTH
  Aman...