List NETWORK adapter physical autonegotiation setting

Similar Questions

• Satellite L450D - wireless network adapter disappeared

  Hello

  I have a Satellite L450D - 11 X Windows 7

  It seems to me suffer a problem mentioned by a few others, although I can't find a definitive answer on a cause/solution.

  Out of the blue, the other day while using my laptop, my wireless network disconnected and instead of an indicator in the taskbar wireless, I find myself with a wired connection indicator. The option to turn on wireless using FN + F8 disappeared (he jumps now from F7 to F9), and in the Device Manager, the only listed network adapter is "Realtek PCIe FF Family controller".

  My computer is only 4 months, so I imagine that it's under warranty still...

  Can anyone advise me on what I should do?

  Thanks in advance for your help

  Hello

  Try to update driver Wlan, you can consult:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Post edited by: Jeka-HE

• Specify a physical NETWORK adapter to a virtual machine

  It is a fundamental issue, or it was in VMware Server 1.x, but in v2.x options may not be available.  Here's what I do:

  I have a physical host with 3 different network interface cards installed. I want to configure the vNIC on each of my 2 mV at one of the physical network cards, so they each have their own. In VMware server 1.x I would install a vmnet # for each NETWORK adapter and then configure each virtual computer to use one of the new vmnet I set everything up. VMware Server 2, I can still set up since both vnet (one for each NETWORK card), but when I go to change settings of NETWORK adapter in the virtual machine, I have three options (Bridged, host-only and NAT). Two of these two new vnets are "bridge", but I need to specify a fo the vnet jumpered for each.

  I know I must be missing something very simple, do not hesitate to point out my mistake. Thank you!

  What is your host operating system? If Windows, run the virtual network Editor (vmnetcfg.exe) announces the administrator, disable the automatic bypass and map each physical NIC to another VMNet adapter * in the tab "virtual host network address." If Linux, run /usr/bin/vmware-config.pl (it will take your virtual machines off / suspension) and choose to create more than one Bridged network when you are prompted, choosing different logical names and specitying eth0, eth1, eth2 or whatever they are called.

  Then in the virtual machine, they must appear in the drop-down list for the card that you have.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server

  Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server? I use the version standard edition. Thanks for any advice.

  Thank you all.

  John Hayes

  Hello

  The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Thank you

• Two virtual machines share the same physical network adapter

  I have a virtual network adapter that I linked to a physical network adapter on my box where two virtual machines are running.

  I assigned two virtual machines to this vmnet adapter.

  On one I can ping other machines of physics on the same subnet as the physical computer, but the other VM can ping only other virtual machines.

  When I try to ping from one physical computer to this virtual machine I get the error message windows "ping transmission has failed. General failure. ».

  Is what I'm trying to are not not possible?

  First thing to do is to ensure the automatic bypass is enabled disabled in the VMnet virtual network editor your use to the bridge to.

  Second need to see the output of ipconfig/all on the Windows host and guests and or ifconfig on the Linux host and or guests.

  DO NOT copy and paste the output directly in the body of the response rather redirect the output of the commands in a text file and then archive (compress) files in a single zip archive and attach it to an answer.

  You can use the following example:

  Under Windows:

  ipconfig/all > "% USERPROFILE%\Desktop\host_ipconfig.txt".

  ipconfig/all > "%USERPROFILE%\Desktop\guest (n) _ipconfig.txt".

  Linux:

  ifconfig > ~/Desktop/host_ipconfig.txt

  ifconfig > ~/Desktop/guest (n) _ipconfig.txt

  Also include in the archive .zip .vmx and vmware*.log for two Virtual Machines configuration files.

• Unable to set status of network adapter

  I wrote a basic script to connect to a virtual machine network status both connected & Connect at power on. The script seems to work perfectly without any error. However when I check a box of network system is always disabled. Here's the script:

  #Script to connect a virtual machine network adapter
  $cred = get-Credential
  SE connect-VIServer server.domain.com - Credential $cred
  $machines = get - VM
  foreach ($machine in $machines)
  {
  All-NIC - NIC 'NIC 1' - Networkname 'Organization LAN' - StartConnected: $true - connected: $true
  }
  Disconnect-VIServer-confirm: $false

  As far as I know ownership NetworkAdapter needs a NetworkAdapter object instead of a name of a network card. So I changed your script to first get to the purpose of the network card.

  #Script to connect a virtual machines network card
  $cred = Get-Credential
  Connect-VIServer server.domain.com -Credential $cred
  Get-VM | Get-NetworkAdapter | `
  Where-Object {$_.Name -eq 'Network adapter 1'} | `
  Set-NetworkAdapter -Networkname 'Organisation LAN' -StartConnected:$true -Connected:$true -Confirm:$false
  Disconnect-VIServer -Confirm:$false
  

  Best regards, Robert

• After you install a new NETWORK adapter on ESX3.5, how it can been list?

  Wanted to use iSCSI, after installing a new card NETWORK on ESX3.5, list by ifconfig, only vswif0 may be listed, but a new.  How can he be the list?

  second problem is that, after installing the new card NETWORK, other PC cannot ping the first NETWORK adapter until it has worked well. But now only it can ping by itself. ethtool he sees. Why?

  Thank you!

  George

  We checked out the new device system: esxcfg-vswitch - a vswitchname...

• Assign a physical NETWORK adapter to the virtual machine

  Hey everybody,

  I did some research, but found answers to Linux and not Windows. Here's my situation:

  I'm running a physical machine with Dual Gigabit Lan and Windows 7 Pro. I would like to have all my virtual machines that I run under VmWare Workstation 6.5.3 using the 2nd physical NETWORK adapter on the mpotherboard. Is this possible? How do I? Thank you.

  Hello

  You can specify in the virtual network Editor (Edit toolbar option)

  See the attached picture.

  If you can't change that... go to the previous "self-link" tab and uncheck the box

  Concerning

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

• setting up of a second NETWORK adapter on the ESX machine...

  I'm in the part of my ESX machine and I NIC one configured for LAN, but I try to activate and configure a second NETWORK adapter on this computer, so I can connect it to a VLAN different. When I go I see the place to allow the second NETWORK card (and I have) but it says always "disconnected" and I see only the settings for the first NETWORK adapter in the IP configuration screen. How can I set an IP address and stuff for the second NETWORK card, and why is it showing as offline after that I went out and restarted the management stuff?

  Go under ESX / Configuration / networks.

  You will see your vSwitch. You can change it or click Add, to add a new vSwitch.

  For the basic concepts, see also:

  http://www.VMware.com/files/PDF/virtual_networking_concepts.PDF

  André

• Change an IP address on a physical NETWORK adapter

  Hello world

  I'm the first time here a pretty unexperienced with VMWare.

  I installed a machine with 4 NICs physikal. Two cards network is use for the user communication on the local network and they get IP addresses from the DHCP server. A NETWORK card, I need for external communication. This NIC is connected to a firewall (with integrated router) outside the network and there is no DHCP running. That's why I need to set the IP address for this NETWORK card static.

  I can't find the command or button to set the IP address for this network adapter. This question may be stupid, but I'm just hanging for several hours on this problem.

  Any help and the comment is {color: #000000} enjoyed {color}.

  Kind regards

  Michael

  If you want to use vmnic3 for traffic VM - Yes. You can install Windows 2008 and set it to 192.168.100.4.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Satellite L300-2This - wireless network adapter is not listed in Device Manager

  PL. seated me in solving the WIFI issue in my newly purchased Toshiba Satellite L300-2This (PSLBGE 020004AR)

  1. me confirm - this model is equipped with WIFI as shown in the Web of Toshiba site but my device manager it is not displayed at all. (using Windows XP)-its only display Realteck LAN

  2. I installed the drivers from the site web of Toshiba - but always hardware WIFI not be picked up by any driver. Device Manager showing that a single 'Ethernet LAN' not installed-may be it is the WIFI card but once again on three pilots (real teak/intel/Ac..). which is the right selection computer-based laptop model No.? as none does not detect the hardware.

  3. confirm me - this model is NOT - equipped also BluTooth?

  Appreciate the quick response in this regard.

  Violaine Asim

  Hi mate,

  Just a simple question: have you activated the wireless network adapter using the hardware on the computer switch portable and key combination FN + F8?

  Satellite L300 is permanently equipped with wireless network card because a friend of mine had the same specifications.

  However, you should try to update the WLAN driver. Check the download page of the Toshiba driver for an update.

  Welcome them

• Two mentions listed under the network adapter in Device Manager

  Good evening

  For the record, I use a Compaq Presario AMD Athlon (TM) 64 Processor 3300 +, 2411 MHz/1.93 GB RAM, running Windows XP Home Edition, SP3, with IE8.

  I was looking around ' Device Manager ' tonight and I noticed two references under "network card".

  (1) 1394 network adapter

  (2) siS 900-Based PCI Fast Ethernet adapt

  Could someone please tell me what is the purpose of each of them and do I need two permits.

  I have only this one computer and I connect to the Internet with a connection cable from Comcast.

  Thank you and best regards,

  2harts4ever

  "... enough Said." Keep smiling because I'm smiling too! »

  Hello:

  There is no reason why you should disable one of them. Certainly not your adapter PCI ethernet, or your internet connection is also disabled.

  Here's what's your other link:

  http://ask-Leo.com/whats_this_1394_network_adapter_on_my_machine.html

  Paul

• Windows 8 problem with wireless network adapter

  I had a lot of trouble to stay connected to the internet with my college wireless network on

  my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:

  Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9

  Diagnostic information (wireless connectivity)

  Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra -91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s)

  Diagnostic information (wireless connectivity)

  Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem

  Diagnostic information (wireless network adapter)

  Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem

  Thanks for any help! It happened for about eight months and it's really frustrating.

  Hello

  Check with Dell and Broadcom, their documentation diagnostics online and drivers.
  and ask questions in the forums about known problems. The two Dell driver update, then
  Broadcom if there is more recent.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  Broadcom - downloads and Customer Support
  http://www.Broadcom.com/support/

  ==============================

  More troubleshooting:

  It is possible that the drivers you use, even if later now available, are not
  100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
  Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
  RealTek, Atheros and others may have newer versions is not available to the mother of system
  -site of the manufacturer on board. And continue to check in with them regularly over the next year.
  Also update the BIOS, drivers from the chipset of low level and major embedded and separate
  device drivers.

  Download your applications and devices in Windows 8.1
  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  =========================================================

  Don't forget to check the updates of the firmware on the router, because who can have a definite effect
  on connections Windows 8.1 same if other OS systems connections are fine.

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
  the manufacturer of real device driver updates. If there is no newer versions re - install the same
  ones. Ask known in their forums (if any) problems.

  ===================================

  General resolution: (after the above if necessary)

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8/8.1 - material
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8/8.1 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8/8.1 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8/8.1 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The Linux host, guest of WinXP, host has 2 network cards, how to choose which NETWORK adapter to use?

  I know it's something of an FAQ, but several hours spent on these forums and Google search gave me nothing of what works.

  All the solutions I've seen assume Windows as host and (something) as a guest.

  In my case, the host is Linux (CentOS 6.4) and invited is Windows XP.

  The host has two network cards, one on a 10.x.x.x network and the other on 192.168.x.x network.  In the guest virtual network adapter connects to the network 10.x.x.x.  I want it on 192.168.x.x network.

  I would be happy if I added another virtual network card and one of them connected to each network, but two of them connect to the 10.x.x.x network (with 10.x.x.x different IP numbers).

  The solutions I've seen indicate that under the Virtual Machine-> network adapter settings-> network connection, you click on the button "Configure the adapter" and load of come from there.  It would be great, but I have no button "Configure the adapter" or something like that.  I have a button "Advanced", but that just allows me traffic into and out of the butterfly and set a new MAC address, that's all.

  Because the host is Linux, I have also no equivalent to vmnetcfg.exe, at least none that I can find.

  So, where should I go from here?

  VMware Player is the version 6.0.0 (freshly upgraded 5.0.2 this afternoon).  I tried with version 5.0.2 and got the same thing.

  Thank you...

  Eric / www.rkt-tech.com

  You will need to use the virtual network Editor, although first you may need to create symbolic links.

  The first symbolic link already exist in a Terminal using the following command. Note: If connected a root the sudo command is not necessary when the.  Tip: Copy and paste the commands!

  ls-l/usr/lib/vmware/bin/vmware-netcfg

  If it exists, the output should be similar to the following.

  lrwxrwxrwx 1 root root 13 29 Sep 08:17 / usr/lib/vmware/bin/vmware - netcfg->/usr/lib/vmware/bin/appLoader

  At this point, you can simply use the following command to bring the virtual network Editor.

  sudo/usr/lib/vmware/bin/vmware-netcfg

  However, if you want easier access creates a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  If the symbolic link/usr/bin/vmware-netcfg does not exist, then use the following command.

  sudo ln-s/usr/lib/vmware/bin/appLoader/usr/lib/vmware/bin/vmware-netcfg

  Then, to facilitate access to create a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  To bring up the virtual network in a Terminal editor use the following command.

  sudo vmware-netcfg

  In the virtual network editor disable automatic bypass on vmnet0 by selecting the network map target in the bridge to: list box.

• How to change the local IP on the virtual NETWORK adapter for Web server address

  Hi all

  I have a physical Windows system, on which I run VMware Workstation 9. Now on VMware I run Ubuntu 12.10 a LAMP for a Web server.
  Problem:
  Now, my local IP address for my NETWORK card virtual (using the Ubuntu one) at the address 192.168.159.7 and my router only emits the 10.0.0.x range IP addresses. So if I want to port forward to the virtual NETWORK adapter that has a 192.168 address, I can't, so my LAMP Web server are not accessible to the outside because the router does not send packets on port 80 to the virtual card... How to fix this?
  The only way I guess that is to be assigned an ip address of 10.0.0.x to the virtual NETWORK adapter?
  But how do I do this?
  I tried to do it on the host from the Windows machine with "get my IP address automatically", but she emits an 192.168 address every time...
  Thank you

  Welcome to the community,

  I guess that the virtual computer is currently configured to "NAT" or "Host-Only' networking! That would explain the 192.168.x.x IP address.

  There are 2 options to be able to access the web server on the virtual computer.

  1. with "NAT" network configured

  In this case forward port 80 to the IP address of the host and configure the port forwarding on the virtual computer in the "Virtual Network Editor. This way you can leave the IP address on the private network of 192 (if it is currently set to NAT)

  2. use "Bridged" network layout

  Reconfigure the virtual NETWORK adapter to the machine virtual networking "Bridged" within the parameters of the virtual machine, assign an IP address from your router network (10.x.x.x) and do the port forwarding on the router directly to the IP address of the virtual machine.

  André