List of all planned work

Similar Questions

• The list of all the paths of the Subvi (expected)

  Hello

  I reconstruct a relatively large application (say a unique and main VI) to restore a little chunks from other builds, completely perhaps a few or several thousands of VI.  The nomenclature of hierarchy of folder of the component of the generations is not quite logical and there is a certain cross linking or duplication between the Subvi is based.

  Ideally, to get the organized entire application and later for documentation purposes, I would like to be able to generate a list of files of all THE sous-de in the main VI VI.  I don't know about this gem:

  http://forums.NI.com/T5/LabVIEW/paths-of-the-called-files-how-to-see-them/m-p/2721289/highlight/true...

  However, this version is underway and I can't run the main VI for a list that said by the way, for most because it will not run if Subvi are missing, some as a deep layer (on the block diagram of the main VI), others several layers down.  Be able to get a list from which it EXPECTED these s Subvi being would be extremely useful to solve this problem.

  Is it possible, without running a VI, to view a list of all filepaths expected of all the sous-de VI?  In the interest of the future organization/documentation, it would be nice if it was a list of these TWO sub - VI that were found as well as (MANY) - VI I say to ignore when loading to load the main VI.

  Thank you!

  mikeporter wrote:
  A few THOUSAND screws? It is not big enough, so huge! In fact, it is much too big - I don't like what he does.

  You look at starting over.

  I do not share this statement.  Several projects, I would call medium-sized loading screw 4,000 in memory, probably about 2,000 or more have been written for the project and the others were the user.lib, toolboxes, variousl library and the vi.lib.

  If you add your VI to a project, you can go to the files tab, and it will show you the structure of all code depenedency records.  Of course, if the screws are missing it cannot tell where on the disc these dependencies have been loaded from.  From LabVIEW 2014 NOR has the ability to know the load path planned to miss the screws you see when you open help in a missing VI context.  In the Help window will tell you the planned trajectory.

  But I still don't see why this function may not work for you.  I tried it and he found the projected paths of components on a broken main VI.

• How to view a list of all the songs by artist

  is it possible to search for a specific artist, and a list of all their songs to listen to.   Similar to how works Spotify?

  Read this previous post in here Apple Knowledge Base by Swandy...

  Listen to the music of AN artist...

• The list of all the steps in a sequence file

  Hi guys,.

  I'm new on the forum of NI Teststand, so this my first topic here. The situation is the following:

  Currently I develop a LV operator interface and I need to have a list of all the test step in a sequence file.

  I am able to list all the steps of a sequence, but in the file of the entire sequence.

  Are there opportunities to do?

  Thanks in advance!

  Hi Maroci,

  first of all, I am also quite new to TestStand, but I still think I can help you a bit.

  Given that your code works for a sequence in the file simply browse all the sequences in the SequenceFile. Consider something like this:

  This help you?
  Edit: Don forgt not (like me) to close the SequenceFile reference!

• How to get a list of all files/folders on the Sansa Clip +.

  Hello

  I have a lot of MP3s on my Clip +, but realize that I put there duplicates in different folders. My plan was to use a command prompt to get a list of all the files on the device, and then use a utility that shows me duplicate names and the locations of the files. I could then simply delete the Clip +.

  The problem, it is that the Clip + is simply presented as a 'portable' in Windows Explorer (Windows 7 Home) - there is no way to assign a drive letter :-( Which seems a bit odd, as it is, after all, plugged into one of my USB ports... I used the dir command on all drives assigned in my computer as "devices with removable storage". One of them must be the port to which the Clip + is attached, but they all say "device is not ready". So the Clip + is not identified in this way.

  Is it possible at all to get a list of the files that are on the Clip +?

  Thank you!

  That's how the Clip + shows when connected in USB MTP mode.  If you connect mode MSC (defined in the control panel), Clip + comes as a disk.

  But: the problem you have is, Windows displays only the files that have been transferred in the Clip + under USB mode then logged in as.  I don't know if this applies to designated offices, but - you could try and see.

  Another solution would be to copy all of your files on your computer, under MTP mode; Delete the files on the Clip +. move the Clip + mode MSC; and then transfer the files to the Clip +.  Now, you should be able to see the files under Windows (always connected in MSC mode) and can run the utilities that you had planned.

  I hope this helps.

• Can XPS 410 - we have a list of all THE processors that are compatible from the Bios DXP061-020501

  I know I know, this has been asked several times on the forums. The problem is that is scattered between so many threads and I'd like to see in one place a list of all CPU that work on the XPS 410 from the current version of Bios DXP061-020501 compatable. It would be nice for a forum mod to publish a complete list of processors supported and then perhaps same sticky it.
   
  Thanks in advance
  Dave

  Message edited by dcgtls on 05/09/2007 22:55

  
  

• Where can I get a list of all devices that support OS 5.0

  Hi all

  When you submit a request to the AppWorld, I wonder to select the supported devices. My applications work on any device with OS 5.0, but I can't find a list of all devices that support OS 5.0 (shipped with it or with option 5.0). Anyone knows where I can find such a list.

  Thank you

  Wolf

  Don't worry about this. Just select as minimum supported OS 5.0 version and after that select all possible devices. App World will correspond to devices, and the version of the OS, i.e. users with OS 5.0 devices will see your app while that those who have the lower version of the OS won't be able to see or to download your application.

• Could someone please help me access My VLC Player on my list of 'all programs '?

  Hello

  I was on the wrong forum, so I'm starting a new thread. I have a laptop HP, Windows 7 Home, 64 bit. I use VLC player and WMP for different purposes.

  For some reason any I don't have easy access to my program VLC. It is not on my list of 'all programs '. I went to start, and search and the program wouldn't come to the top. The only two places I can find it listed on my Uninstall list and default programs. I can't right click anywhere to get a drop down menu to work with. What should do?

  Anne

  And yet a third wire.

  1: remove VLC completely from the list 'uninstall '.

  2: restart your PC.

  3: go here and download VLC. Choose Save as and save it in your download folder. Do not race. http://www.videolan.org/VLC/index.html

  4: close all other programs and turn off your security system and then find VLC in the downloads folder and install it.

  5: look at all the options. Especially to add desktop and Start Menu icons.

  6: restart.

• BlackBerry smartphone data Plan works... right?

  Hi all

  It goes well if my BB data plan works on a GPRS (upper case), but without the BB icon?

  I said... with a wi - fi connection, I UMA and the BB icon, and all is well... when I'm outside, I have GPRS (uppercase), and BB seems to work as well, but no icon of BB.

  Support Orange told me that as long as services are working, no matter if I have the icon or not, but it seems weird to me.

  danberna wrote:

  Support Orange told me that as long as services are working, no matter if I have the icon or not, but it seems weird to me.

  Orange assistance should read the public knowledge base article:

  KB02334 Indicators of State of network of networks GSM/GPRS/EDGE / 3G

  The BlackBerry icon appears only with the 3G. So you are 100% fine.

• I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I do not think that information... Adobe titles represent the only link I know following your accounts, but not where the programs are installed

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

• How to get a list of all components in the EPM environment and their versions?

  Hi all
  
  E.M.P. verison 11.1.2.2.x
  
  I was wondering if there is an easier way to get a list of all components of the EPM environment (planning, Shared Services, EAS, Manager of Calc, etc.) and versions for them all.
  
  Currently I just go to help-> about the browser, but through the workspace, it gives only the version of workspace of the tabs and irrelevant.
  
  I'm trying to find the version so that I can apply the relevant patches.
  
  Thank you
  
  See you soon,.
  Abhishek

  Access

  c:\Oracle\Middleware\oracle_common\OPatch and race

  opatch.bat lsinventory - oh C:\Oracle\Middleware\EPMSystem11R1 - jre c:\oracle\middleware\jdk160_21-details

  This will give you the complete list of products.

  Concerning

  Celvin

  http://www.orahyplabs.com

  Please check the answers as useful/correct as appropriate

• The list of all interfaces that use a certain option on the KM

  Hi all
  
  I'm trying to (using the tables of working repository) a list of all interfaces using has one or more "lit" for the relevant knowledge module. For example, we have IKM Oracle incremental update used in 200 + interfaces. This KM has a FLOW_CONTROL option that is set to True for some of these interfaces and False for the rest. Is there a query on the repository tables for us the list of interfaces/tables with the option is set to True, we can write?
  
  Any information would be really useful. Thank you.

  Hello

  You can try with something like this:

  SELECT proj.project_name, folder.folder_name, int.POP_NAME interface_name, km.trt_name ikm, opt.ue_name option_name, int_opt.short_value, int_opt.i_txt_value
    FROM DEV_ODI_REPO.SNP_PROJECT proj, DEV_ODI_REPO.SNP_FOLDER folder, DEV_ODI_REPO.SNP_POP int, DEV_ODI_REPO.snp_trt km, DEV_ODI_REPO.snp_user_exit opt, DEV_ODI_REPO.snp_ue_used int_opt
    WHERE proj.i_project = folder.i_project
      AND folder.i_folder = int.i_folder
      AND km.i_trt = int.i_trt_kim
      AND km.i_trt = opt.i_trt
      AND int.i_pop = int_opt.i_instance
      AND opt.i_user_exit = int_opt.i_user_exit
      AND opt.ue_name = 'FLOW_CONTROL'
    ORDER BY km.trt_name;
  

  This will display the project, folder, the name of the interface, the used IKM, option and its values (boolean or text).

  As you can see, I did join on the ikm (km.i_trt = int.i_trt_kim). You might need a table over if you want to do on LKMs.

  It will be useful.

  Kind regards
  JeromeFr

  Post edited by: JeromeFr
  I forgot a join condition between snp_user_exit and snp_ue_used on columns of i_user_exit

• list of all the vm and what host they belong to

  Hi, I'm new to powercli & just had a (probably really simple) question.

  When I do something like:

  Get-vmhost-name "hostname" | Get - vm

  I get all the VMs on that host, but I only get powerstate, name, num cpu and memory. But if I again through "export-csv" pipes, I get tons more of information. How can I get this info on the command line itself, or better still to filter the columns that I want to see when the piping to the csv format?

  My goal was actually to get a list of all vm AND host it that belonged to, using the command get - vm, but I couldn't very well to show me was the information I'm looking for.

  Thanks in advance.

  Hello, lm31-

  There are several ways you could get the data properties.  You can "select" properties of the object using the Select-Object cmdlet.  So if you want to get a virtual machine and return some properties of choice, you might do something like:

  PS C:\> Get-VM myVM | Select-Object Name,Folder,ProvisionedSpaceGB,NumCpu,MemoryMB
  
  Name               : myVM
  Folder             : testVMs
  ProvisionedSpaceGB : 41.01
  NumCpu             : 1
  MemoryMB           : 2048
  

  A simple example of something that would work for your scenario to get all virtual machines and displaying the name of the host on which they are running:

  PS C:\> Get-VM | Select-Object Name,VMHost
  
  Name          VMHost
  ----          ------
  myVM          ourHost0
  myVM1         ourHost1
  ...
  

  Once you get a little more complicated reporting, you will definitely want to use the cmdlet Get-View, for reasons of speed of the script, but for this example, the foregoing will do ok.

• How to get a list of all the pipes in a ThinApp

  I have a simple program to list all files in a folder.  I use it to get a list of named pipes by the way
  \\.\pipe\*as the argument, but it does not work if I Pack the program as a fine application.  I get the error code 3 (ERROR_PATH_NOT_FOUND).  I tried to use CreateFile on
  \\.\pipe\but he also failed when running as a ThinApp. Are their ways to get a list of all the pipes in a ThinApp?  Here is the source code.

  #include <windows.h>
  #include <tchar.h>
  #include <stdio.h>
  
  #include "stdafx.h"
  
  int main(int argc, char* argv[])
  {
     WIN32_FIND_DATA FindFileData;
     HANDLE hFind;
  
     if( argc != 2 )
     {
            _tprintf(TEXT("Usage: %s [target_file]\n"), argv[0]);
            return -1;
     }
  
     _tprintf (TEXT("Target file is %s\n"), argv[1]);
  
     hFind = FindFirstFile(argv[1], &FindFileData);
     if (hFind == INVALID_HANDLE_VALUE) 
     {
            printf ("FindFirstFile failed (%d)\n", GetLastError());
            return -1;
     } 
     else 
     {
            _tprintf (TEXT("The first file found is %s\n"), 
                 FindFileData.cFileName);
  
            BOOL nextFile = FindNextFile(hFind, &FindFileData);
  
            while (nextFile)
            {
                 _tprintf (TEXT("The next file found is %s\n"), 
                           FindFileData.cFileName);
  
                 nextFile = FindNextFile(hFind, &FindFileData);
            }
  
            FindClose(hFind);
     }
  
     return 0;
  }
  

  OK, so what about the original example of FindFirstFile, if I try with 4.6 it does not work for me. I use 6 VC to create the application and then add it to the cmd project and then rebuild. I tried these combinations:

  App.exe \\.\pipe\* (this works)

  App.exe \\.\pipe\ (this does not work, in native mode as it does not work)

  App.exe //./pipe/* (this works)

  App.exe //./pipe/ (this does not work, in native mode as it does not work)

  can you tell me about the results you get when you try the above?

  Thank you.

• Master plan work

  I do a lot of Web wireframing and high-fidelity design. Many pages have many common elements (header, footer, navigation, etc...). With the help of symbols is a great time saver for me, but it would be great to create a MASTER work plan! InDesign has master pages, but it would be good to depend on one tool to do it all, especially with the illustrator tool set!

  So here's how it works: create work plans multiple for your project (in this case, it is a Web site design). Define the first work plan as the work of MASTER plan. Anything you put in the main work surface will be duplicated to all other work plans (or the individual to that you would select to copy). When you change something, like a button in the main navigation, it will change in all other work plans. When you create or change something in a non-maitre work plan it will not change anything in the main work surface. Thus, you will probably have to separate an element of the master plan of work to make it unique (for example if another page needs).

  That would be so AWESOME!

  -Sergie

  You could make these elements into symbols, to update an and then they are all updated. Break symbol according to the needs.