List of call display

Similar Questions

• Phone number Call Display - Blackberry Storm 9530 smart blackBerry

  I have a blackberry storm 9530 unlocked Verizon wireless, U.S.. But I use it for Canada with Fido service provider. As everything else works like internet, outgoing calls, messenger, emails, etc., the phone seems unlocked. But I noticed it today that display the call does not work. I checked with my service provider, they said I have call display and it should work, but they didn't know anything about this phone then could not help (as the phone is not the provider). So when someone calls I see unknown call number (no name or number display). I don't know if it's a network problem (which I think this isn't because they say its on and should work) or something to be changed in the handset. Please help me if anyone knows how to solve this problem. Thanks in advance!

  It could be one of the four solutions... Try these:

  1. make sure that you set your own code to the Dialer phone screen > Options > smart dialing.
  Set your country Code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no
  * If you don't see it here, your device operating system handles this differently. Look at the Options > Security > encryption.

  4. go to Options on your device > Security Options > encryption > include contacts the value 'No '.

• last name in my contact list is not displayed. It's as if the list is long and will not display the last of them.

  Last name in my contact list is not displayed. It's as if the list is long and will not display the last of them. Is there anyway to fix this?

  Hello

  1. are you referring to e-mail contacts or Windows contacts?
  2. who is your provider of mail service?
  3. using any e-mail client?
  4. don't you make changes to the computer before the show?

  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  The information is not sufficient to answer your question. Please provide us with more information to answer your question better.

• Mail vip list does not display messages from all mailboxes

  When I first put in place, I remember having the option to display the messages in all mailboxes - a really useful facility VIP. Recently, I noticed that most of my personalities was empty, but the messages were still there in their individual files. I followed the advice of aid to click Sort by Date, and then choose 'all the mailboxes' but this option does not appear. Moving messages of certain dignitaries other files back to Inbox makes it immediately visible in the Vips. So now, if I want my VIP lists for any use I leave everything in my Inbox, which is just chaotic and defeated the object to have folders for businesses, etc. It's only happened recently - it is connected to an upgrade or something similar, I wonder?

  Hi Boxmakermichael,

  Thank you for using communities Support from Apple! I'm sorry to hear that you're having these problems with mail. If you encounter problems with the function of VIP mailbox in Mail, you can find the information in the following articles useful:

  Address postal (El Capitan): search for messages from senders of VIP

  Mail (El Capitan): Mailboxes clever use to organize messages

  By default, the built-in VIP mailbox only checks emails from VIP which are currently in the Inbox, not in other boxes to letters or records either locally on the server. If you have e-mail set up a rule to move emails from specific VIPs in their own folders (or are moving them manually), it is probably why you don't see them in the VIP mailbox and why they reappear when you your choice in the Inbox.

  See the 'All the mailboxes' option "Sort by Date", you must select the individual mailbox the VIP under "VIP".  If your VIP example is 'Joe', select the 'Joe' mailbox then you will see the option "all the mailboxes.

  If you don't want not organized these emails in separate folders and view them all in a folder of VIP, however, there is a fairly simple solution. As mentioned in the article above, the integrated VIP mailbox is simply a mailbox smart who is set to pick up the mail of VIPs in your Inbox. While you can't change the settings of this particular mailbox, you can create a new box smart letters (called, for example, 'VIP'), where the only criteria is "Sender's VIP", without any limitation on the message tracking. This should then display all of your emails from senders of VIP, regardless of what box mailbox or a folder they are in. I hope it's useful and please let us know how it works.

  See you soon

• MovieClip will not add to the list after calling addChild()

  I have a MovieClip in the library who refuses to be added to the stage during his call with addChild(). Here's the code.

  You will see a function called clickedACTDD_BTN. You will also see that the function offers a choice if the MovieClip is present, then it is deleted. If it is not present, then this is given properties and added. Also, note my tracing instructions in each choice. All signs as expected but the MovieClip ever arises. I've been on that days code and just can't see what I did wrong. Everyone sees it?

  package
  {
  PAheader 1.0
  
  import flash.display. *;
  import flash.events. *;
  import flash.geom. *;
  
  SerializableAttribute public class PAheader extends MovieClip
  {
  public var headerScreen:Screen = Screen.mainScreen;
  public var hdrLogo;
  public var BLKback;
  public var PRFLAVTR:profileAvatarMC = new profileAvatarMC(); Profile avatar
  public var msgbubble:messageBubbleMC = new messageBubbleMC(); ToolTip
  public var magGlass:magnifyingGlassMC = new magnifyingGlassMC(); In the shape of magnifying glass
  public var ACTDD_BTN:ActionsDDBtnMC = new ActionsDDBtnMC(); ACTIONS drop-down list button.
  public var HISDropD_BTN:HistoryDDBtnMC = new HistoryDDBtnMC(); HISTORY drop-down list button.
  public var REPDD_BTN:ReportsDDBtnMC = new ReportsDDBtnMC(); Button drop-down list of REPORTS.
  public var actionbucket:ActionBucket = new ActionBucket();

  public void PAheader()
  {
  addEventListener (Event.ADDED_TO_STAGE, initPAheader);
  } / - End constructor public function PAheader().
  
  public void initPAheader(e:Event_=_null):void
  {
  trace("==============================================");
  trace ("PAheader called.");
  trace ("of PAheader: visibleBounds.width:" + headerScreen.visibleBounds.width + "visibleBounds.width:" + headerScreen.visibleBounds.height);
  addEventListener (Event.RESIZE, resizedHeader);
  
  BLKback.width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,1024);
  BLKback.scaleY = BLKback.scaleX;
  //------------- adding Assets ----------------------------------------------------------------------------------------- ---------------------------------
  
  -Avatar profile
  PRFLAVTR.x = stage.fullScreenWidth - PRFLAVTR.width - 10;
  PRFLAVTR.y = height/2-PRFLAVTR.height/2;
  addChild (PRFLAVTR);
  -The ToolTip
  msgbubble.x = PRFLAVTR.x - PRFLAVTR.width - 10;
  msgbubble.y = height/2 - msgbubble.height/2;
  addChild (msgbubble);
  -Shaped magnifying glass
  magGlass.x = msgbubble.x - msgbubble.width - 10;
  magGlass.x = msgbubble.x - msgbubble.width - 10;
  magGlass.y = height/2 - magGlass.height/2;
  addChild (magGlass);
  
  } // ----------------------------------------------------------------------------------------- -------------------------- End public function initPAheader().
  public void resizedHeader(e:Event_=_null):void
  {
  trace ("header REDIMENSIONNE");
  
  } // ----------------------------------------------------------------------------------------- ------------------------- End public function resizedHeader().
  
  public void addActionsDDButton(caller:MovieClip):void
  {
  trace ("addActionsDDButton. the appellant is: "+ calling);
  
  -ACTIONS button
  ACTDD_BTN. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
  ACTDD_BTN.addEventListener (MouseEvent.CLICK, clickedACTDD_BTN);
  ACTDD_BTN.addEventListener (MouseEvent.MOUSE_OUT, outACTDD_BTN);
  ACTDD_BTN. ScaleY = ACTDD_BTN.scaleX;
  ACTDD_BTN.x = HISDropD_BTN.x - ACTDD_BTN.width;
  ACTDD_BTN.y = BLKback.y;
  caller.addChild (ACTDD_BTN);
  trace ("added ACTIONS!");
  
  } / / - End public static void addDDButtons().
  
  public void addHistoryDDButton(caller:MovieClip):void
  {
  trace ("addHistoryDDButton. the appellant is: "+ calling);
  -HISTORY button
  HISDropD_BTN.width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
  HISDropD_BTN.scaleY = HISDropD_BTN.scaleX;
  HISDropD_BTN.x = headerScreen.visibleBounds.width/2 - HISDropD_BTN.width/2;
  HISDropD_BTN.y = BLKback.y;
  caller.addChild (HISDropD_BTN);
  trace ("added HISTORY!");
  } / / - End addHistoryDDButton() of the public service.
  
  public void addReportsDDButton(caller:MovieClip):void
  {
  trace ("addReportsDDButton. the appellant is: "+ calling);
  -The REPORTS button
  REPDD_BTN. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
  REPDD_BTN. ScaleY = REPDD_BTN.scaleX;
  REPDD_BTN.x = HISDropD_BTN.x + ACTDD_BTN.width;
  REPDD_BTN.y = BLKback.y;
  caller.addChild (REPDD_BTN);
  trace ("added REPORTS!");
  } / / - End addHistoryDDButton() of the public service.
  
  / * function removeButtons(theCaller:MovieClip) public
  {
  If (theCaller.Contains (HISDropD_BTN): theCaller.contains (ACTDD_BTN): theCaller.contains (REPDD_BTN))
  {
  theCaller.removeChild (HISDropD_BTN);
  theCaller.removeChild (ACTDD_BTN);
  theCaller.removeChild (REPDD_BTN);
  }
  } / / - End public static void removeButtons(). * /
  
  public void clickedACTDD_BTN(e:MouseEvent_=_null):void
  {
  trace ("Clicked clickedACTDD_BTN!");
  If (Contains (actionbucket))
  {
  trace (this);
  removeChild (actionbucket);
  trace ("1");
  }
  on the other
  {
  trace (this);
  actionbucket. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,161);
  actionbucket.scaleY = actionbucket.scaleX;
  actionbucket.x = ACTDD_BTN.x;
  actionbucket.y = ACTDD_BTN.y + ACTDD_BTN.height;
  actionbucket.y = ACTDD_BTN.y;
  addChild (actionbucket);
  trace ("2");
  }
  } / / - End clickedACTDD_BTN() of the public service.
  
  public void outACTDD_BTN(e:MouseEvent_=_null):void
  {
  If (Contains (actionbucket))
  {
  detectTarget (actionbucket);
  }
  } // ----------------------------------------------------------------------------------------- -------------------------- End public function outACTDD_BTN().
  
  public void detectTarget(target:MovieClip):Boolean
  {
  var mousePoint:Point = target.localToGlobal (new Point (target.mouseX, target.mouseY));
  If (Target.hitTestPoint (mousePoint.x, mousePoint.y))
  {
  trace ("equity bucket!");
  Returns true;
  }
  on the other
  {
  trace ("not on STOCK bucket!");
  Returns false;
  }
  } // ----------------------------------------------------------------------------------------- -------------------------- End public function detectTarget().
  } // ========================================================================================= ======== End public class PAheader{}.
  } // ========================================================================================= =================== End package{}.

  my mistake, this.addChild (this) is not going to work.

  PAheader is a class and a class is not on stage.

  an instance of the class could be on stage, however.

  and another instance might not be on stage.

  just because you see something that is a member of PAheader class, or maybe just looks like a class member, does not mean that all instances, or even none, are on stage.

  to be sure: trace (this.stage) = null, means the instance you are checking is not on stage.

  "(and I don't know where you want to add this instance of the class, but, assuming that your document is a MovieClip and not a Sprite), MovieClip (root) .addChild (this) might work, although it's bad coding."  and stage.addChild (this) of colin will not work because the stage is not defined in this class.

• Mail signature drop-down list is not displayed

  Hi all, I have a problem using Mail v9.3 with OS X El Capitan v10.11.5 because it is not display the drop-down list of signatures in the new email or reply/forward an email windows.

  

  I checked all the Mail preferences, and I see all the associated parameters.

  

  Can someone help me?. Thanks in advance.

  Please take these steps to remove the mail folders 'sandbox '.

  Step 1

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Reveal

  the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

  Log off or restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

  CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

  Step 2

  If step 1 does not resolve the problem, repeat with this line:

  ~/Library/Containers/com.apple.MailServiceAgent

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• How can I show my music in the classical list with iTunes display 12.4?

  Just checked my music in iTunes 12.4 and of course, since the recent update, it is set to display the default grid view. I've set it to list view, but is again groups music by album showing album art.

  I don't want that. I want the old list view (classic?) who did not have the album art and just show each piece on a line by itself. It was much easier to navigate.

  How can I do? There used to be three buttons at the top right, but those who have now disappeared.

  Hussar wrote:

  Just checked my music in iTunes 12.4 and of course, since the recent update, it is set to display the default grid view. I've set it to list view, but is again groups music by album showing album art.

  I don't want that. I want the old list view (classic?) who did not have the album art and just show each piece on a line by itself. It was much easier to navigate.

  How can I do? There used to be three buttons at the top right, but those who have now disappeared.

  Open iTunes.  In the sidebar, upward at the top you should see "library".

  

  Click on "songs".  You should see that your library built like this now:

  

• Languages of the translator of Google in the drop-down list is not displayed

  Hello

  I use google Translator Web site in my site. But the languages in the dropdown list isn't list in mozilla, is it IE and chrome does it well.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• List of calls in recent weeks to jump

  Hi all:

  Don't know if anyone has come across this but I noticed since upgrading my iPhone to ios9 6plus that my recent calls list will save the past 5 days of calls and then spend a whole week.

  Is this something that I.can.fix in the settings or something.

  Thank you

  Hi psquillace,.

  It seems that there is a problem with recent not updated on your iPhone 6 more since the update to the latest version of iOS. A quick and easy troubleshooting tip that may be able to solve this problem is restart the iPhone, as illustrated here:

  Restart your iPhone, iPad or iPod touch - Apple Support

  If this doesn't resolve the problem, try to restore your iPhone as described here:

  Restore your device from an iCloud or iTunes backup - Apple Support

  Take care.

• How can I print a list of the display of the contents of a specific MAIL folder?

  I have windows xp3 and use outlook express 6 - I want to be able to print the contents of a specific folder by e-mail... JUST A LIST OF THAT IS in THE FOLDER... .not the entire summary folder... not a real impression each email... e. g by clicking on the file and it displays content... it would be great if I could actually print view screen THAT! Is this possible?

  Take a look to the freeware Directory Karen printer Microsoft® Security MVP, 2004-2010

• BlackBerry Smartphones call display

  Hi guys, I av the bb Curve 8310. How can I change the display of the appellant to show just the name of the caller (without the appellant fon #) Please?

  This option is not there in BlackBerry. We have to live with it. However, you can get some 3rd party applications to do the trick for you.

• BlackBerry Smartphones help - new user of BB - how can I get a list of calls made/received?

  I spent all day looking for an icon to click on the list of my calls (both crazy and received) but have no icon call log or anything like that at all! I loaded the CD that came with my BB 8900 (I only got 4 days) and he said I should have an option to purchase journal somewhere, but I can't. I tried to change the theme and restore the default values, but still nothing. Certainly there must be an icon or a graphical call center?

  I showd my sister on the phone today and it also has a BB, but she said, my call list icon is missing!

  Really grateful for any help that I am perplexed.

  Hurrah - thanks a lot - I feel a * beep *! I don't could not find anywhere!

  Thank you very much

  Emma

• "Select list" Application point displays Null instead of "select value".

  I have defined an agenda of the application in the form of select list and I try to display 'Select a value' of a null value. I put "Display value Null" "Select value" and the value of display Null values yes. I would like to than the message "select a value ' to always show when the user enters the initial values for 'CREATE' an entry in the table." The user is not required to enter a value. I would like to just display the message anyway. How to "do" APEX the message. Even if I set values, nothing appears.

  Ok. I found the answer. I just needed to include IS NOT NULL in the WHERE CLAUSE of my statement Select mapped to my Select list and the Extra Null disappear and allow my message to display on the application page.

  Published by: V Rickert on April 23, 2013 09:33

• Selection list and hidden display problem

  Hi all
  
  I use a list of dynamic selection of value, that when you press a button sets the value of a hidden display element. The next page then uses the option display hidden in a SQL query.
  
  It strangely sometimes works and sometimes doesn't - he often fights with the values in the select list that are more than 30 characters.
  
  Someone has an idea what is happening?
  
  Thank you very much
  Tom

  Use a calculation of page of type 'expression plsql' to recalculate the value.

  Replace (: p1_item, ' amp ;','');)

  Shunt

• Import address book csv file, in the pop-up window, it is only left list of columns displayed.

  See the attached pictures.
  windoew work is 'left & associarions columns.
  -of - columns are displayed to match items

  I met the 'left only column.
  -only - items are displayed, the left column is empty exercise.

  continuation of the process, there was a message that
  "error imporint duning happened that no address is imported.
  (Korean message Translsted)

  That I can't import the address file which is the csv file.

  I don't know what the problem only occurs on the Korean version.
  I tried only on the Korean version.

  How can I solve this problem?

  no photos.

  Open your CSV is a spreadsheet and make sure that it is really a CSV file. Sounds to me like the first line doesn't have a domain names at this topic. or they are not set properly.