Sudden stops Vista HP Slimline

Similar Questions

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• Wi - Fi and network suddenly stopped... Local only (Vista).

  I basically solved my problem. I'm writing this in case someone else has this problem.  (I was without any networking capability for about a month after a failure and request Windows update several uninstals due to a malfunction stopped responding - don't know if any of these are related?)  The computer couldn't even * is * on the network.

  First, I eliminated material as being the cause.  My suspicion is that a firewall was still in force, even if I completely uninstalled my Antivirus and disabled the Windows Firewall already.  Then I tried to disable the Base filtering engine (the "Services"), and * voila! * all returned.  I immediately installed a temporary, caught up firewall on Windows Update and reinstalled my Antivirus.  Everything's fine now, as long as I keep the Base filtering engine.  Rebooting it stops all the networks again.  I don't know if there are risks to let off, but for now, I'm happy.

  ******************************************************************

  Sorry if it's verbose.  I was no longer able to use networks of any type for about 3 weeks on my laptop Vista Home Basic.  Are wired and wireless down (I use different routers to a cable and Wi - Fi), while my Office XP continues work as a champion using a router.

  Everything had been working fine for a year or more until what all of a sudden stop.

  I also can't connect to the network wirelessly at my school more (it is a laptop).

  (Note that I am not currently under any additional firewall beyond the Windows Firewall).

  Three concurrent problems occurred at the time of the failure which could be related.

  (1) I tried an uninstall of the interface software LegoMindstorms NXT after a school project.  Uninstalling shifted on for about an hour and has stopped responding.  I did a system restore and repeated the uninstall.

  (2) I noticed the 'auto-protect active"icon of Symantec AV was changed to"disabled", even if I was not disabled it and my license is up to date.  In the settings menu, I unchecked and recontroler the auto-protect of selection, but it didn't fix it.  I tried to uninstall it, and it stopped responding as well.  I did a restore and another attempt to uninstall succeeded.  Windows Firewall and defender will have to do for now.  (I'll be reinstalling my AV soon and will get updates when I am able to connect again).

  (3) I reviewed my recent Windows updates installed and found the last (KB982536) has a status marked "failed".  I uninstalled that before that failed just to see if she had caused the next update not working, but it does not solve the problem.

  * I tried several system restores, but none have set.

  I also did the following:

  tried another ethernet cable
  * removed wired and wireless cards from the Device Manager, rebooted and (allowed them to reinstall)
  * updated to the latest version of the NETWORK adapter driver by using my other computer (XP) and the copy of the USB
  * sfc/scannow
  * checking memory
  * chkdsk
  * netsh int ip reset
  * netsh int ip reset c:\resetlog.txt
  * netsh int Reinitialis
  * netsh winsock reset
  * netsh winsock reset catalog
  * netsh interface tcp set global autotuninglevel = disabled
  * ipconfig/flushdns
  * nbstat - r
  * nbstat - rr
  * Microsoft Fixit "Dotnet" cleaning tool for Vista (copied from USB)
  * Micorsoft Fixit "50357: cannot get an IP addy" (copied from USB) - has attempted but * is not * run
  Tried to IPv6 without commitment, but has not helped - I finally put back it

  ---------------------------------
  Results of the ipconfig/all command
  ---------------------------------

  Windows IP configuration

  Name of the host...: Ethos
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8139/810 x Family Fast Ethernet NIC
  Physical address.... : 00-16-D4-A5-9B-7E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::815e:ad3e:e462:4e77% 17 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.78.119 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 452990676
  DHCPv6 DUID customer...: 00-01-00-01-0D-71-D8-8B-00-16-D4-A5-9B-7E
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Wireless Network Connection 2 wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 802. 11b / g WLAN #2
  Physical address.... : 00-1A-73-0F-EB-C9
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::2e:baf9:726c:defb % 15 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.222.251 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 268442227
  DHCPv6 DUID customer...: 00-01-00-01-0D-71-D8-8B-00-16-D4-A5-9B-7E
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {6A632B82-93D2-45ED-8829-3B6C5DF2C50F}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {5ECD7A6B-D36C-4179-9928-D56EFA36F365}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  ---------------------------------

  (An upgrade to Windows 7 can solve the problem, but this isn't an option I will consider for now.)

  Your settings do not look correct to me.  There is no default gateway (which alone explains why you can't connect).  Good number of other entries look right either (they are different, that I'm used to seeing).

  I suggest you remove all your network connections (remove them all) and start from scratch.  Configuration of the LAN connection, and when you get this work then set up the internet connection and get this to work.  Do not re - install connections, you do not need more (it seems that you have a good number of people).  You have tried to repair these connections and there may be something wrong with them which cannot be repaired (they can be corrupted or some type of conflict or other).  Starting with a network connection fees registration with nothing (not wired or wireless) and do everything as if it was a new machine can solve the problem.  Make sure you know the correct settings before deleting the current connections (and make sure that they are correct even if you need to contact your ISP for confirmation).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hi my printer suddenly stopped and execution runtime error. Question of debugging Microsoft Visual c ++ runtime library. I have reset the drivers but still does not. It's windows vista 32 bit

  Hi, my printer has suddenly stopped.

  Program c:\windows\windows\system32\spoolsv.exe
  c:\windows\windows\system32\spool\drivers\W32X86\3\lxdidatr.dll

  Run the time check failure #3-la variable is 'sinumberofTopic' is used without being defined
  If I try again it said failure of the assertion
  File dmrclibrary.cpp
  Line 415
  Expression: m_hlibModule

  First of all, you can try using system restore if the problem just started happening.

  Go to your Start Menu > Accessories > system tools > system restore.

  Select a point of dated system restore to before the problem started happening and then restore your system at this point. During the system restore, you can restore the configuration of your system and you will not lose any personal data, the system restore affects only your configuration.

  After doing the system restore you don't like something that has changed on your system, you can "undo" the restoration of the system.

  If the system restore is not an option for you, or System Restore does not resolve the problem, you can take the measures put forward in the Microsoft Knowledgebase article below:

  You can also try diagnostics automated web site Windows Fix It:

  http://support.Microsoft.com/GP/printing_problems

  or take the advanced stages described in the following knowledge base article:

  http://support.Microsoft.com/kb/810894

• My Lenovo Y330 laptop suddenly stops.

  Hi guys.

  I use my laptop for all 10months now and since I've upgraded to Windows 7, I am unable to make one of my videos from my Adobe Premiere Pro CS4, even, Media Encoder and more...

  I also noticed that whenever I'm playing Call of Duty: Modern Warfare 2, after a while my laptop suddenly stops. So I think, it's because the processor in my laptop works 100% and it it stop automatically? But what I don't understand is, when I was with 64-bit Windows Vista SP2, this does not happen. Help me please...

  I read in some of the previous posts that there could be a bug or a worm with "Energy Cup"? who's who? can someone enlighten me please? Thank you.

  Here's my laptop specs. :

  Lenovo Y330

  Intel Core 2 Duo T5870
  Apacer 4 GB DDR2 800 mhz RAM
  WD Scorpio Blue 250 GB-5400 RPM

  ATI Radeon HD3450

  Windows 7 Ultimate 64 bit

  I already have 2 clean installations of Windows 7 Ultimate 64 bit and it still happens... = c

  
  

• my internet explores all of a sudden stops working then restarts, how can I fix

  I recntly been havig IE suddenly stops working then restarts itself.  My virus scans are clean and I have not downloaded anything new.  Any ideas?  I got 1blue screen with a view of crash dump.

  Hello

  Internet Explorer freezes or crashes
  http://support.Microsoft.com/GP/ie_freezes_or_crashes

  Tips for solving problems with Internet Explorer
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  When you start Internet Explorer, it opens, flashes and then closes immediately
  http://support.Microsoft.com/kb/967896

  ------------------------------------------

  Several troubleshooting methods:

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
  ask about it here.

  Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
  unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  For Vista:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------

  For Windows 7:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  I hope this helps.

• DVD-CD ROM DRIVE SUDDENLY STOPPED WORKING

  My DVD - CD rom suddenly stopped working.  It does not appear on my computer.  In Device Manager, it shows the exclamation point in a yellow triangle and has the following: Windows cannot load the driver for this hardware device.  The driver may be corrupted or missing. (Code 39).  I tried updating the driver, and he said that the best updated driver is already installed.  But it won't work.  When I put a disc in, the green light as it tries to work, but nothing.  In the properties in Device Manager, he suggested looking for a microsoft solution and I did it and there is no solutions.  Help, please!  I have install all the recommended and important updates, I have this game automatically.  I have Vista service pack 2.  Apart from this, the computer works fine.  I appreciate any help you can offer.  Thank you.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Do this - control panel - Device Manager 1 - click double-click on the drive - CD/DVD
  Driver update (this can do nothing as MS is far behind the drivers of certification). Now LAW
  Click on - UNINSTALL - REBOOT - this will rebuild the driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  A MR FIXIT
  http://support.Microsoft.com/kb/314060

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  or

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Other possibilities include loose contacts or cables and maybe a bad disc.

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My screensaver that shows pictures of "My pictures" has suddenly stopped working.

  My screensaver that shows pictures of "My pictures" has suddenly stopped working giving the error message "this application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem"I use Windows Vista Home Premium with a 32-bit operating system.

  Where I go/glance to re - install this file?

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  A screen saver that displays the images stops working in Windows:

  http://support.Microsoft.com/kb/2425702

  Method 2:

  Try to uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

  Step 1:

  To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2:

  Download and install the latest package for the version of Windows Vista, you use and see if it helps.

  My PC running the 32-bit version or 64-bit Windows?

  You can check the below links to download the same.
  Download details: Microsoft Visual C++ 2010 Redistributable Package (x 86)

  Download details: Microsoft Visual C++ 2010 Redistributable Package (x 64)

  Method 3:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  Hope the information is useful.

• DVD/CD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.

  My CD/DVD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.  I have uninstalled and still get this error.  When I put a CD in nothing happens.  It is not read.  Any suggestions?

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• detected external display suddenly stopped working - displays black screen

  original title: detected external display suddenly stopped working

  Hello

  I have searched in several forums, but have not been able to completely solve this problem.  It has been set provisionally and has not yet.
  This system I have:
  HP TouchSmart tx2 tablet pc with Windows Vista Service Pack 2 x 64-bit (Home Premium)
  AMD Turion (tm) X 2 Ultra Dual-Core Mobile ZM - 82, 2.2 GHz
  ATI Radeon HD 3200 graphics card
  I have been working for more than a year with a monitor flat screen Dell ST2310 external monitor and works very well with the setting "use external display only.  From one minute to the next two screen went black so I forced a restart and again the same problem.  I decided to manually disconnect the external monitor by unplugging the VGA cable from the laptop that turns on automatically to the main display as it would if I am disconnected display.  When I connected the VGA cable again the same question in the two screens were entirely black.  I unplugged once more the VGA cable if I could change the settings in Windows mobility.  I plugged back in the VGA cable after changing the settings of "external display only" to 'mirror' devices and after playing for a bit, with the Windows Mobility Center, I had the external display to work again my regular settings: "external display only.  This solution lasted a day and now works in the main screen and the external screen is completely black.
  I tried in vain to solutions:
  -Change VGA cables continues to experience the same issue.

  -Tested according to the specifications and Dell monitor Monitor works fine if the backlight is not the problem.
  -Records update for ATI Radeon HD 3200 graphics card and driver generic PnP Monitor and Dell ST2310.
  -Uninstalled ATI Catalyst Manager and re install now as AMD Vision Engine Control Center.
  -Checked AMD Vision Engine Control Center recognizes the connected external display.
  -Uninstalled the driver Dell ST2310 and re installed the driver.
  -On the screen settings have tried to extend the desktop on the external screen (second)
  Now, this is what's going on and don't know how to fix it:

  -Windows Mobility Center detects a monitor external, even when the VGA cable is disconnected.

  -When it detects the external display it sometimes detects it as DELL ST2310, sometimes as a generic Non - PnP monitor.

  -Sometimes under "Monitor" in the Device Manager, there are several monitors generic Non - PnP contained also the Dell ST2310 and generic PnP monitor.

  -When the external monitor is connected, the screen is completely black and does not work even after changing the settings Windows Mobility or Fn F4.
  Help!

  Hello
   
  I also suggest you to update the BIOS. Visit the manufacturer for more information.
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  WARNING:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  See also: http://h10010.www1.hp.com/ewfrf/wc/document?docname=c01881110&tmp_track_link=ot_recdoc/c00678157/en_us/c01881110/loc:4 & cc = us & dlc = en & lc = en & product = 352607 #N624
   
  Thank you

• Windows Mail suddenly stopped, sending and receiving mail and it opens up a dial-up connection box when I try.

  I am running vista, my windows mail suddenly stopped, send and receive, and then opens remote access to connect to the internet. He doesn't do not connect to retrieve mail

  original title: Windows Mail problem

  Try to remove your e-mail account, and then compact and repair the database (see www.oehelp.com/WMUtil/), and then add your e-mail account back (no messages will be lost).  If this does not it, see if you can log on to your e-mail account through your email provider's website and see if it works.  If not, then contact your email provider and explain the problem.

  Steve

• Built in laptop keyboard suddenly stopped working the Dell Studio 15

  Dell studio 15 laptop
  Vista Home premium 64-bit
  Keyboard suddenly stopped working, using the screen keyboard now.  All buttons unresponsive.  No virus or malware found by updated AVG scan.  The touch pad or external mouse, both work.  I have no external keyboard.  System Restore does not work.  The driver is up to date and its status is "work prperly.
  Help, please.

  Is it still under warranty, if so contact Dell

• CD player is suddenly stop working

  my cd player is suddenly stop working and I found there is no driver cd/dvd ROM in my it's Manager device missing what to do? any help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My computer keeps showing random parts "suddenly stop working" and the computer needs to reboot - I think it's a virus.

  I have a problem when occasionally and randomly my computer components apparently all of a sudden "stop working and must close ' which translates into my computer restart itself. This happens a lot, but I can not associate with any particular issue, as it changes each time. I think it's a virus, but nothing seems to be wrong, it's just the inconvenience. I had the computer more than a year and nothing wrong with it. The only other common thing is a program called "twonkymedia" seems to be on my pc and "must be closed", but I can't find anywhere to remove it.

  It's driving me crazy now, as can happen at any time during the game, work or other passtimes of the computer.

  Hello

  1 make thorough scrutiny for malware and don't forget no one program intercepts all methods of overkill use so much.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-ID/default.htm

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Service Windows wireless suddenly stopped working because of problem with the KeyIso service

  Description of the problem: Windows Wireless Services suddenly stopped working on my computer. What I have discovered so far that the problem is that the WLAN AutoConfig service does not work because of the failure of the function "KeyIso". The error message for the mentions "Error 126" KeyIso (the specified module could not be found). Any help to fix this would be appreciated. TDW

  Hello

  What is the antivirus installed on the computer program?

  KeyIso Description:

  The service provides insulation for private keys key processes and operations of such associated encryption required by the common criteria. The service stores and uses long term keys in a secure process in line with the requirements of the common criteria. It should normally be disabled, as otherwise, these cryptographic operations may fail.

  Looks like there could be a corruption with the wireless connection that you have added. You can perform the steps.

  Method 1:
  

  Try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.

  a. Click Start, type services.msc and press enter.
  b. Locate the Autoconfiguration WLAN service, double-click to open its Properties window.
  c as. under the general tab, change the startup type to Automatic and click on the Start button.
  d. click on apply, then ok.

  Method 2:

  To resolve this problem, try using the tool (SFC.exe) System File Checker. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  You can uninstall and reinstall the network card and check.

  a. click Start, type Device Manager in the Start search box and press enter.
  b. locate the network adapters and expand the same.
  c. Select the Wireless connection, right click and choose Uninstall.
  d. restart the computer, if prompted.

  Drivers should settle automatically after the computer restarts.

  Now you can install the latest network card drivers and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Response with status so that we can help you.