Trackpad pairing failed

Similar Questions

• Satellite C55t-B5349 - Bluetooth pairing fails

  I have a C55t-B5349 installed with windows 8.1.

  I'm trying to pair a Plantronics headset to the laptop using Bluetooth.
  The system doesn't have the option in the settings of the PC. So I tried to install the battery Bluetooth for Windows, found on the pilot site. While loading the driver a dialogue box appears asking to turn on the device.

  I turned on the Plantronics headset but there is no confirmation that the device was found and the driver installation progress meter does not advance until the end I cancelled out of the facility because it seems that the driver does not load if a device is not found at this stage of the installation of the driver. View programs in Control Panel displays the battery Bluetooth as charge however.

  The system does not find my Plantronics M25 helmet when try again matching by launching the Bluetooth Wizard.
  What happens instead, is that the driver installation dialog box reappears at the same position of progress than during an attempt to original installation.

  In addition the system still does not display the Bluetooth option in the settings of the PC. I have restart after the procedure as well.
  The Windows Bluetooth stack is reported however Version in the list 9.10.32 programs.

  Do I need to install another driver or another solution, to get the Bluetooth option work?

  I found the specs of the laptop on the Toshiba USA product page.

  This unit is NOT supported Bluetooth module internal... so you can not pair the BT device
  http://www.Toshiba.com/us/computers/...C50/C55T-B5349

  However, you can add the feature of BT using external Toshiba Bluetooth V 2.1 + EDR USB nano adapter
  (part number: PA3710U-1BTM)

• BlackBerry Smartphones automatic pairing fails on VW Premium Bluetooth

  I have VW Premium phone preparation in my 2010 vehicle and had previously had it paired with a Tourch HTC Pro and it worked perfectly.

  I now changed my phone to a BB Torch 9800 and some initial difficulty with the BB and the VW car kit.

  I had two units of paired and working but when I left the vehicle and then had to go back, I have to stop bluetooth on the BB services and then restart them before the phone will pair with success with the VW car kit.

  The version of the software on the phone is 6.0.0.246

  I solved this problem myself.

  In the properties of the device to the paired bluetooth device, there is an option for title "approved."

  It was set by default to 'Request' and this should be changed to Yes.

  Save the settings and it works perfectly.

• Unable to connect error headset/Bluetooth Headset: the pairing attempt failed in an unknown error, is the reported error code: 0x80070005

  Original title: Bluetooth headset not connecting

  I have a Plantronics 9xxBackBeat headset, and I'm trying to connect my laptop (HP Pavilion dv6000)

  However, when pairing the headset I gives me the message
  "Device pairing failed.
  Matching attempt failed in an unknown error, is the reported error code: 0x80070005
  Contact the manufacturer of your device. »
  However, there is no driver for the 9xxBackBeat headphones and when I contacted their support, I'm referred my OS manufacturer, but when I talk about Microsoft, they tell me to go to Plantronics.
  Can someone tell me please how to fix this error?
  If it is not a mistake on the side of Plantronic, and if it's not a mistake on the side of Microsoft Windows, and then what happens?

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2 - is this compatible with your operating system device?

  First thing I suggest you to check the manual and if this device is compatible with your operating system.

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2: If the problem persists, then try to update driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: Also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Set up a Bluetooth device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• Apple Watch will not pair manually or automatically

  Watch became disconnected from the phone.  Followed all the instructions to disable the twinning / re-pair.  Automatic pairing fails repeatedly.  Manual matching fails as well - the watch never displays a 6-digit code.  Has anyone seen this before / resolved for it?  Thank you.

  Hello

  For later use, it is not necessary to clear the pairing and re-pair Apple Watch when it is disconnected. If your watch becomes disconnected via Bluetooth and unable to connect to a Wi - Fi network, known at the time, it will display the icon disconnected on the dial of the Watch:

  

  Bluetooth disconnects occur every time that the pair iPhone is not available (as in the iOS updates or when your iPhone is out of scope). The watch and the iPhone must reconnect automatically a short while after having reconciled being brought back.

  If they do not automatically reconnect instead of disconnecting your watch, rather trying to keep your iPhone and Apple Watch close to each other and follow these steps until they reconnect:

  • Check that Bluetooth and Wi - Fi are activated on your iPhone:
    • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
  • Check that airplane Mode is not enabled on your watch:
    • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
      • If the glance of parameters says already connected and the symbol in the upper right corner is a green phone, your watch is already connected to your iPhone via Bluetooth.
    • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
    • Otherwise, it can help to activate / turn off the airplane Mode again.
  • Restart both devices, both turn off together, and then restart your iPhone first.

  For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

• How re-pair the bluetooth keyboard & numeric keypad - he will not give me a pairing code.

  I'm having a problem, try to re - connect my Bluetooth keyboard and numeric keypad.  First my keypad has been properly installed and works fine, but then when I tried to add the keyboard that I clicked on the number pad icon again once and he gave me a code to enter, I canceled just thinking it was already installed and working, and I didn't need to do.  Big mistake!  Now I could not do re-paired again.

  After talking with a guy tech at Staples, I disabled bluetooth for my laptop completely and then distributed in the computer and re-enabled Bluetooth.  I was able to add my mouse still fine, but now the keyboard and the numeric keypad gives me the same error and won't let me pair.   The message is:

  Pairing failed.  An ocrred of error during the process of pairing with Microsoft Bluetooth Number pad.  Make sure that the device is discoverable, and then click Retry.

  Well, I did it several times but without success.  He won't give me a code for one of these pair again.

  I use Windows XP.

  Can anyone help?

  Thank you!

  Penny

  Hello

  You can try the solutions listed in the articles below and check if that helps.

  http://support.Microsoft.com/kb/838398/en-us

  http://support.Microsoft.com/GP/cp_keyboards_master#TAB0

  http://www.Microsoft.com/hardware/Bluetooth/connectionguide3.mspx

  http://www.Microsoft.com/hardware/support/Bluetooth/en-us/default.mspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VMCI socket connect() fails repeatedly, then retrieves when tried in a loop

  I have a VMCI application that uses a number of VMCI sockets to connect to a guest programs.   I noticed an intermittent failure on 2 of the sockets which seems to be linked to the execution of the connect () /closesocket () in a loop too quickly.

  One of the client programs (lets call it customer sock 1) in the prompt will continuously run code that looks roughly similar:

  try again every 500ms until we connect to the server VMCI socket.

  While (! connected)

  {

  int retVal = connect(vmciSocket,...);

  If (retVal! = 0)

  {

  Sleep (500);

  }

  }

  until its socket server (server 1 sock) appears, sometime later.  The client can operate for long periods of time to try to connect to the server.

  During the execution of customer 1 a second pair of sockets VMCI is created.  Sometimes the client side of the 2nd pair fails to connect with an error (invalid) 100037 WSA.   If put the side customer (customer sock 2) in a loop to try slow it will connect eventually (after about 20 seconds and the failures of 10-15).  The second take of client contains simple to connect, sleep to 5 attempts before leaving logic.

  With 1 2 customer the customer end abnormally about 40% of the time with the error logs indicating that he is not able to connect to its server VMCI socket.   If I disable the client 1, the failure rate falls to 10%.

  In addition, I noticed that these error matches an error log in my vmware.log.   When these errors I get error that looks like the following:

  2012 02-23 T 22: 39:49.751Z | vCPU-0 | I120: VMCI QueuePair: error in BusMemVMCI_InvalidateBPNs for alloc (numInvalidated = 5, numPPNs = 130).
  2012 02-23 T 22: 39:50.012Z | vCPU-0 | I120: VMCI QueuePair: error in BusMemVMCI_InvalidateBPNs for alloc (numInvalidated = 123, numPPNs = 130).
  2012 02-23 T 22: 39:50.278Z | vCPU-0 | I120: VMCI QueuePair: error in BusMemVMCI_InvalidateBPNs for alloc (numInvalidated = 30, numPPNs = 130).
  2012 02-23 T 22: 39:53.640Z | vCPU-0 | I120: VMCI QueuePair: error in BusMemVMCI_InvalidateBPNs for alloc (numInvalidated = 76, numPPNs = 130).
  2012 02-23 T 22: 39:56.831Z | vCPU-0 | I120: VMCI QueuePair: error in BusMemVMCI_InvalidateBPNs for alloc (numInvalidated = 90, numPPNs = 130).
  2012 02-23 T 22: 39:57.111Z | vCPU-0 | I120: VMCI QueuePair: error in BusMemVMCI_InvalidateBPNs for alloc (numInvalidated = 10 numPPNs = 130).
  2012 02-23 T 22: 39:57.374Z | vCPU-0 | I120: VMCI QueuePair: error in BusMemVMCI_InvalidateBPNs for alloc (numInvalidated = 120 numPPNs = 130).
  2012 02-23 T 22: 39:57.640Z | vCPU-0 | I120: VMCI QueuePair: error in BusMemVMCI_InvalidateBPNs for alloc (numInvalidated = 42 numPPNs = 130).

  He comes to Workstation 8.0.1 for Windows link VMCI 8.0.0 - vmware_vmci_sockets-471780 headers.   Windows 7 in comments and host operating system.

  Anyone encountered before or knows a way around?

  Hey Kevin,

  This can be an interference caused by the VMware SVGA or USB drivers in the comments. Could check you if all the drivers are in use and if disabling one or the other solves the problem?

  If one of these drivers, we have unfortunately not a problem as such. The solution is to keep a retry for a while as you already do, or do not use these drivers if possible.

  Thank you

  Jørgen

• Satellite U400: Problem connecting Bluetooth & PCsuite

  Hello

  I have a little problem with U400 and Ericsson C510 attempts to connect by bluetooth.
  Installed a new bios, bluetooth stack 6.10.10 (T). The bluetooth stack sees C510 but when he tryes said pair "Detection of service failed.

  When I try to pair devices PCsuite 5.009.00 it goes further.
  Suite PC give me the code PIN and C510 request entry, but when I confirm the PIN in the C510, PCsuite returns the error "pairing failed, you want to repeat?

  This time C510 apears in the window 'see devices in the options bluetoothstack...' but PCsuite sees C510 and BluetoothStack or...

  Thank you in advance.

  Hello

  I had a similar problem with Satellite P200 and my mobile phone from Motorola. Yesterday I installed the latest version of stack 6.40.02 BT (T) and all of a sudden, everything works fine.

  Please install the last pile of BT of http://aps2.toshiba-tro.de/bluetooth/ and try again.

• Car Bluetooth connection problems

  I have a car with ford by Microsoft sync. It connects and ad matched on the bike pure x, but on the car, it says pairing failed and does not record the phone. Someone similar and have a fix?

  
  

• Portable printer HP 150 ~ Bluetooth

  I have a mac book air and I try to connect to the Hp 150 mobile printer via bluetooth, but when I click on pair it says pairing failed. I then click on options and it asks me for a code and I don't know where to find the code... Someone please help!

  Hello

  We can see the links and check if it helps.

  https://support.Apple.com/en-us/HT201900

  https://support.Apple.com/en-in/HT201311

  https://support.Apple.com/en-us/HT202167

  For more assistance, contact the Apple Support.

  Thank you.

• BlackBerry Smartphones Blackberry 9700 - Design or Production defects

  Nice day

  The trackpad has failed after one day of use... I went back to the phone company and got a replacement... 3 blackberry in 5 days... an adventure.

• BootCamp + Windows 8.1 and Windows 10: trackpad and keyboard bluetooth always unsuccessful pairing

  My computer is a model of end 2011 of 13-inch MacBook Pro. I use an external 27 "monitor and bluetooth trackpad and keyboard. Until the last week of July, 2016 that I used with Windows 8 with BootCamp 5, nicely. Then I got a message that Windows 8 would be not updated for critical and security updates. I decided to upgrade to 8.1 Windows but the trackpad wireless works intermittently, and the wireless keyboard is not working at all. I get a message to pair, but the pairing is always unsuccessful. Then I upgraded to Windows 10 and the same problems with wireless keyboard and trackpad.

  Does anyone have a solution? Thank you

  You can try this. UN-pair external Apple Trackpad and keyboard on the side OSX, pair it with test first, and then pair on the side Windows OSX.

• Problem Pairing device: Bluetooth virtual keyboard (VKB) detection of service failed

  Hi, I could use help to determine the cause and the solution to a problem I have. I want to associate this with my Toshiba Tecra M4-S435 keyboard. The laptop has an internal module installed, "Cambridge Silicon Radio, LMP (V: S) 02:0490." I installed the last 5.10.01 (T) BT stack. I have several other paired devices, but this one is the original questions.

  The unit is in the discovery as a keyboard VKB (it supports HID and SPP); I want to use the HID profile. In the authentication dialog, the VKB beeps, who is his warning that a PIN can be typed into the unit, but to hit the enter key, a dialog box informs me that "Detection of Service Failed". I've seen similar problems posted on the manufacturer's website, but I have not seen any resolution.

  Any help is greatly appreciated.

  Hello

  I m not an expert from BT, but if you have several other devices with your laptop coupled, then everything is ok with your Tecra M4 BT stack and the machine.
  It seems that there is a compatibility problem with your external virtual Bluetooth keyboard.

  Either the Toshiba BT stack does not support this VBK and service or the firmware of this device allows a few worries
  However, in case I would recommend contacting manufacturing virtual Bluetooth keyboard for more details.
  Guys should more known on own products as simple Toshiba here users in the forum.

  Good luck

• Trackpad will not iMac pair 2009 after upgrade to El Capitan

  After the upgrade to El Capitan on a 27-inch late 2009 iMac I'm more able to match a trackpad from Apple.  The trackpad works properly, because it pairs with a newer iMac.  Any ideas?

  If it is associated with something else, delete it from here. Bluetooth devices can only be associated with one thing at a time.

  Barry

• The Magic Trackpad 2 will not pair correctly with a Mac Mini

  I just bought a 2014 2.8 GHz Intel Core i5, Mac Mini and the Magic Trackpad 2 but I can't match the trackpad. When I connect the trackpad by using the usb cable, the functions of a mouse, but the bluetooth does not. I caught a third party mouse, who plugged, unplugged the trackpad and was able to get the pair via bluetooth; However, when I open the Trackpad settings, it says that it cannot find the trackpads. I would obviously like to be able to configure the trackpad and see how much load is on it, but I can't do it without the paired properly.

  Are you running at El Capitan (OS X 10.11.2)?  Which is necessary for all the features of the new mouse and trackpad.