List of field values - value blank or select the new entery (creation).

Similar Questions

• Can we define a field value of contact with the CRM campaign settings ID campaign?

  Hello

  Can we define a field value of contact with the ID of CRM campaign?

  For example: LAST campaign SFDC ID (field of contact) = CRM campaign (campaign) No.

  The Eloqua campaign canvas has the possibility to update CRM directly with the status of the campaign on things like email send or clicks. IF you set these shares to be among the rules of the answer, then as they happen, they will create/update records of campaign in CRM directly responses. However, this will have an impact on information in Eloqua.

• Select the new value from a line in a group of

  I would like on the following query select the value of the new_cost of the column that belongs to the line with the new date in the column m.creation_date, instead of using max (new_cost)
  

  select s.segment1, segment2, m.organization_id, sum(primary_quantity), max(new_cost)
  from inv.mtl_material_transactions m, inv.mtl_system_items_b s
  where s.segment2 = 1000435
  and m.organization_id = 83
  and s.organization_id = 136
  and m.inventory_item_id = s.inventory_item_id
  group by s.segment1, s.segment2, m.organization_id 
  order by s.segment1, s.segment2, m.organization_id 

  for example, the following table I would choose the new_cost of the line with creation date 20/08/2010 14:37 (line 4)
  
  SEGMENT1 SEGMENT2 ORGANIZATION_ID PRIMARY_QUANTITY NEW_COST CREATION_DATE
  1 1000435 83 0,66668 175.500 06/04/2010 16:41
  1 1000435 83 1 189.106 22/06/2010-11:54
  1 1000435 83 - 0, 58333 189.106 2010-07-19 11:55
  1 1000435 83 1 198.459 20/08/2010 14:37
  1 1000435 83 - 0, 5 189.106 08/11/2010 18:12

  Hello

  Another way is to use the FIRST aggregation or the LAST function:

  select    s.segment1, segment2, m.organization_id, sum(primary_quantity)
  ,       MAX (new_cost) KEEP (DENSE_RANK LAST ORDER BY m.creation_date NULLS FIRST)     AS latest_new_cost
  from        inv.mtl_material_transactions       m
  ,        inv.mtl_system_items_b       s
  where       s.segment2          = 1000435
  and        m.organization_id     = 83
  and       s.organization_id     = 136
  and       m.inventory_item_id     = s.inventory_item_id
  group by  s.segment1, s.segment2, m.organization_id
  order by  s.segment1, s.segment2, m.organization_id
  ;
  

  MAX (new_cost) tells what to do in the case of a tie (where two or more lines in the same group have same latest date_creation). MAX means taking the biggest contenders. If these links are impossible to your table, then it does not matter if you say MAX or MIN it.

• Poster No. 8.0 Firefox new tab next to the tab open, have to manually select the new tab

  I see is more a new tab when I have a tab in FF 3.6 and 4.0 running, when I opened a site in a tab, then a new tab appears automatically to the right of the tab in use... I checked the settings on the tab options and all correct... So now, I have to select manually 'New tab' if I want to open a new tab... and it is not to open a new site in a new tab is selected in the OPTIONS, instead of that it opens in the courses tab, so it is the substitution of the tab I'm on... very frustrating... How can I go back to FF 4.0? Thank you TB

  You are welcome: glad it works for you now.

• By selecting the "new folder" button

  Hello.  My "new folder" button isn't more works-it does not create a folder named my documents or on my USB key.  Running Windows 7 on my laptop.  Tried right click and create a folder zipped, but which is not working too.  Computer of the year and the "new folder" button always worked normally until recently.  Cannot find patches by Microsoft.  Any help would be greatly appreciated. Thanx

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  =====================================================================

  (2) run the command SFC /SCANNOW. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  =================================================================

  If SFC Scannow could not repair any or all the corrupt system files
  follow these steps:

  (a) open a command prompt (start / all programs / accessories)
  Right click on the command line option, then select: run as administrator

  (b) at the command prompt, enter: DISM.exe/online/Cleanup-Image /ScanHealth

  Press the ENTER"" key.

  (c) then enter: DISM.exe/online/Cleanup-Image /RestoreHealth

  Press the ENTER"" key.

  (d) now rerun the command SFC/SCANNOW...

  At the command prompt, enter: SFC/scannow

  J W Stuart: http://www.pagestart.com

• Display the field values if that is the different value field

  Hey,.
  I'm using TOAD for Oracle 10.5. There is a select statement that is not filling results.
  Data:

  JOB                    SAL
  PRESIDENT             5000
  MANAGER               2850
  MANAGER               2450
  MANAGER               2975
  ANALYST               3000
  ANALYST               3000
  CLERK                 800
  CLERK                 1100
  CLERK                 950
  CLERK                 1300
  SALESMAN             1600
  SALESMAN             1250
  SALESMAN             1250
  SALESMAN             1500

  SELECT statement

  SELECT JOB, SAL
     FROM  EMP
     WHERE JOB IN (
                 SELECT JOB
                  FROM EMP
                  GROUP BY JOB
                  HAVING COUNT(*) > 1)
                  ORDER BY JOB;

  Once executed select statement only WORK = PRESIDENT record is deleted, not the necessary results.

  JOB                    SAL
  MANAGER               2850
  MANAGER               2450
  MANAGER               2975
  ANALYST               3000
  ANALYST               3000
  CLERK                 800
  CLERK                 1100
  CLERK                 950
  CLERK                 1300
  SALESMAN             1600
  SALESMAN             1250
  SALESMAN             1250
  SALESMAN             1500

  The correct data, PRESIDENT and ANALYST records values may not appear.
  The PRESIDENT does not appear, but the value of the ANALYST shows because that statement
  the product of the values in DUPLICATION. I would like to show records only if values of WORK have
  different values of SAL, duplicates of JOB No. Only if this SAL is different based on the WORK.

  JOB                    SAL
  MANAGER               2850
  MANAGER               2450
  MANAGER               2975
  CLERK                 800
  CLERK                 1100
  CLERK                 950
  CLERK                 1300
  SALESMAN             1600
  SALESMAN             1250
  SALESMAN             1250
  SALESMAN             1500

  I hope someone can help me on this one.

  Hello

  COUNT (*) indicates the number of lines in a group. It has nothing to do with all the values in columns.
  I think you want to COUNT (DISTINCT sal) in this case. It will tell you how many different values of sal are part of the group.

  SELECT JOB, SAL
     FROM  EMP
     WHERE JOB IN (
                  SELECT JOB
                  FROM EMP
                  GROUP BY JOB
                  HAVING COUNT (DISTINCT sal) > 1          -- Changed
            )
     ORDER BY JOB;
  

  Published by: Frank Kulash, December 9, 2010 10:34
  Added example.

• Is there a way to auto text fields in a double set with the news of first instance?

  I have a form of confidentiality, that I need to create. This form must contain multiple instances of the names of parties (between my company and the company X) and I was wondering if there was a way that if when the form is being filled, I can type company X in the first field and it can be filled in other areas, if necessary automatically?

  This is possible by the global setting.

  Give even to the fields and select one of them and object > Binding > Default lie select Global.

  -Sofiane

• How can I replace Google with a blank page on the new default tabs? The tips in the articles does not work.

  When I click on the + symbol to create a new tab, I get the Google search page. How can I get a blank page? I tried everything: virgins and remove the Google search engine, but it has not changed.

  Hello

  Go in your Subject: config page and modify the browser.newtab.urlpreference, if you want a blank page, you can set it to on: vacuum.

  In order to change your Firefox Configuration please follow the following steps:

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise! to keep the comments: config page.

• You select the new system font

  Unlike some, I like the new look of the new community and the purity of the lines of the new police system. However, when I'm working on a problem, I often have to take notes, or previously write my question in 'Notes', either on my iPad or one of my Macs, then I copy / paste over to the thread in which I write. Of course, that he did what I guess that's expected to make and brings my Notes police throughout, whereas now this post is out of the crowd, but may be more difficult to read.

  I tried to use the 'Font-family' and the point size drop down menus to mimic the system font, but haven't found a combination that still seems close. It is possible to paste text in the community Apple publishes and have it look like you wrote here?

  Helvetica regular 13 works best for me.

• Clear text fields values without submit?

  Hello
  
  I have a screen with some text fields, two-button (first button runs a procedure of search and the other would erase the values in order to start a new search). The user wants to be able to clear the fields values without going through the submitted page. How can I do?
  
  Thank you.

  Hello:

  You could change the second page your buttons execute a javascript function that will be the effect on the erasure of field. Change this target of buttons to be a URL. For the URL, specify

  JavaScript:clearFields();

  Add this javascript in the page header.

  CITY

• How to fill a field read-only based on selections from 2 DDlists?

  Follow-up question:

  http://forums.Adobe.com/message/2417876#2417876

  I have 2 drop-down lists.  'Department' and 'unit '.

  The selection in DDlist 'Department' creates a single list in DDlist 'unit '.

  I select the appropriate of these two DDlists elements.

  When I do this, I want the text read-only 'NameOnIDBadge' field is filled with a predefined entry.

  Example:

  In DDlist "Department", select the item «Finance & Administration»

  In DDlist 'Unit', select the 'Food Service' item in the list that appears

  THEN:

  In the text field read-only 'NameOnIDBadge' of the following built-in read-only text appears: "contract food serv.»

  (Thanks to Paul, I already know how to do selection in DDlist 'Department' affect the selection list in DDlist 'Unit')

  "but I don't know how to make the choice of these two DDlists to create a new entry in a text field).

  I have attached a mock-up of the file that I work with...

  If ((firstDDList.rawValue="Whatever") & (secondDDList.rawValue = 'Whatever'))

  yourTextBox.rawValue = "the text on the right"

  This code would go under the second output of DDList event, replace the code I put in there to add the control to the first DDList

• AppleScript: Select the audio files in the Finder, to create playlist

  So, I have modified this Applescript courtesy of WoodenBrain and tried to deconstruct to use. What I need to do, is to be able to select the audio 3-4 files in the Finder, then contextually, select the function "Add to iTunes Playlist", that iTunes ask me for the name of the playlist, create playlist and add files. The script below which realizes, but has an additional step that allows you to select available playlists. I want to remove and don't have iTunes adds the music files to the newly created playlist.

  I know that the solution is somewhere between the block of choice, but I can't seem to get the name of the created playlist and use the the_plvalue. Any ideas?

  on run {parameters}

  Try

  Activate application "iTunes."

  say application "iTunes."

  define newFile to the text returned by (display dialog box default response "Playlist name?" » »)

  make new user playlist with properties {name: newFile}

  set the_playlists to the of each user playlist whose name friendly special is none and smart is false

  the value the_playlists to iSort (the_playlists) to me

  (* to remove the next block *)

  say me to the value the_choice to choose from the list the_playlists with prompt "Add selection to this playlist:

  If the_choice is false then error

  the value the_pl to issue 1 of (every playlist whose name is the_choice)

  (* end choice block *)

  activate

  the value reduced to window 1 to false

  the value cn to (number of points in entrance)

  Repeat with I have from 1 to cn

  say application 'Finder '.

  game of the_item to (point as aliasentry, I)

  If I = 1 then set iname to the name of the_item

  end say

  Add the_item to the_pl

  end Repeat

  end say

  end try

  back entrance

  end run

  on iSort (_list)

  _length set to length of _list

  If _length > 1 then

  Repeat with I have since 2 to _length

  Set temp to the point I of _list

  set j to i - 1

  Repeat while (not (j = 0)) and (point of _list j > temp)

  set agenda (j + 1) of _list to the point of _list j

  set j to j - 1

  end Repeat

  set agenda (j + 1) of _list to temp

  end Repeat

  end if

  return _list

  end iSort

  on is

  Hello

  Put the output of the command of playlist make new user in a variable.

  No need of a loop, the add command takes a list of files.

  -----------------

  the term {parameters}

  Try

  Tell application "iTunes".

  activate

  the text returned by the value tNom (show the default dialog response 'The Playlist name?' » »)

  the value of the_pl to the new playlist user with properties {name: tNom}

  Add entry to the_pl

  reveal the_pl - show the new playlist

  tell the end

  try to end

  Back entrance

  end of race

• The floating field value based on the drop-down list selection (sex)

  Hi, I have created a form that will have different fields, dropdowns etc where the answers will fill a range of fields floating in a letter. I would like to have a list drop-down for sex (m/f) and if selected, either fill in the letter as 'he' or 'she. ' Is this possible?

  Hello

  Here are some ways to do it in this sample https://sites.google.com/site/livecycledesignercookbooks/home/HeShe.pdf?attredirects=0&d=1

  Unrolling of male/female can have a bound value from it, which means we can do refers to the value directly, without however going any calculation.  Is there are a lot of places where it needs to be replaced, then you can simplify things by making reference to the field to form directly, although this requires to change the XML, but if you won't find yourself with a hidden for each instance field.  Or you could edit the XML Source and change the reference for the same id of a floating field.  There are examples of both in the sample linked above.

  Concerning

  Bruce

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• How can I use a selection of menu items drop down to change another field value?

  Hi guys! I work in a medical care center and I need to create a PDF file that must contain certain fields in the form. I managed to create the largest part of these areas, but I'm stuck in a menu drop-down. The drop down menu contains the names of 83 employees. Each employee has a unique code of 6 numbers. I wish these codes to appear automatically in another field based on the selection of a brand in the drop-down menu field. Is there a way to do this without scripts? I'm not a programmer and have no programming capabilities. I work in Adobe Acrobat Pro DC!

  

  You can do this by using a very simple script.

  Basically what you need to do is define the export value of each item in your drop-down menu for the corresponding code to this person and then use this code as the custom text field calculation script (replace 'Employee' in the code with the actual field name, of course):

  Event.Value = this.getField("Employee").valueAsString;

  PS. You must also enable the option validate the selected value immediately in the drop-down list field. You'll find it under properties, Options tab.