List of remote calls SX20 and green call button implemented recent

Similar Questions

• Precision 490 does not start: LED 3 and 4 on the constant and green power button LIT stable!

  My Dell precision 490 starts not No bios screen, that it stops before it happens at this point and a LED number 3 and 4 are on constantly and the power that is lit button green. All the fans in the system comes on and stay on, but it's like that. No video appears on the screen. The monitor works but like I said it seems that he stops before the system reached the stage of the bios boot screen. Graphics card is ok tested in another machine from dell.
  I've deleted all the ram cards and hard drive even the system battery (and reinstalled it) and tried to start but the same result with the fans on and the same façade turns on with the power button on steady green. His market XP Professional SP3 32-bit with 4 GB of ram a dual core Xeon 5160 3 GHz processor and disk of 1 TB sata hard.
  Any suggestions would be great,
  Thank you
  George

  John,

  Thank you for your response. I found my problem and currently running fine. I bought a couple of xeon E5440 processors who don't are not supported by the Council. I had to find it takes 5100 or 5300 series. Once I installed the 5300 series, everything was fine.

  Thank you for your response.

  Vince

• List of phones calls Smart blackBerry & and email delivery problems.

  Hi all

  I am the owner of a BlackBerry Curve 8520 user. I am based in Trinidad and Tobago. I have connected E-mail three suppliers, tstt/outlook express/google handset, yahoo mail and Hotmail.

  The handset is synced with my computer. I run Windows XP Pro SP3.

  My camera has worked perfectly up until a week ago I noticed that emails from three suppliers mentioned above began to appear in my list of phone call. Most of them do not go to their respective places, or if they do, should I try to remove from the list of calls they are also deleted from their respective places. It is now a gene as e-mail does not appear in the list of calls. At least it's never happened before.

  I will be really grateful if assistance can be given through your forums to alleviate the problem.

  Thanking you.

  standeb

  standeb wrote:

  Let me say that apart from the accounts of three e-mail on my home screen, there is also a message icon that appears to show all messages that include all phone calls. If this is the case, the gap is my fault, for evil to understand how works the phone and my fears were unfounded, which leads me to the conclusion that my apologies for the inconvenience caused to you and the community/forum are in order and is hereby duly extended.

  I enjoyed reading your response; wonderfully polite and excellent use of the language. A refreshing change from text to speech and requires instant solutions.

  There is no downside whatsoever.

  Now, I think that you have rightly identified that your being unfamiliar with the device is the cause of your problem.

  The message file you reference, ideally receives notifications of calls, emails from all accounts linked to your device. It's an icon of useful to have on the home screen so that you can see in 1 click messages etc., thus leaving the remaining space on this screen for icons other than the e-mail accounts.

• I lost my list of favorites, called in the upper left corner of my screen

  I lost my list of favorites, called in the upper left corner of my screen.  You don't know where it went?!

  Hello

  What do you mean by Lost, are you not able to display the list? Press Ctrl and me (two keys) key on your keyboard, and then you can click on the green arrow (pointing to the left).

  I hope this helps.

• List of missed calls from blackBerry Smartphones, nobody knows where it is?

  Hello

  When I press the green button on the phone, he gives me a complete list of the phone call, but it does not say who is not respected, receipts, etc.?

  How can I know it?

  I looked in the options and can not find a record of appeal here either.

  Once you press the green button, press the menu key and choose Options. Then, go to the General Options. You can change the display of the phone to the call log list. Missed calls will have a yellow/orange icon with a red x next to it, outgoing calls will have a phone icon green with an arrow pointing to the Northeast, incoming calls will be a phone icon blue with an arrow pointing to the Southeast.

  Also, in your message list, you can hit the ALT + P key combination to take to your call log. If you want to view your call log Messages view, click the green button, press the menu key and choose Options. Then go in Call Logging and change the setting to all calls.

• I can do 2 remote calls at the same time?

  Hello

  I can do 2 remote calls at the same time? For example, if I have the following remote objects:

  "" < mx:RemoteObject id = "myRemote" destination ="zend" source = "MyData" showBusyCursor ="true"fault = "faultListener (event)"> "

  " < mx:method name ="getData"result ="getDataListener (event)"/ >

  < / mx:RemoteObject >

  "" < mx:RemoteObject id = "myRemote2" destination ="zend" source = "MyData2" showBusyCursor ="true"fault = "faultListener (event)"> "

  " < mx:method name ="getData2"result ="getDataListener (event)"/ >

  < / mx:RemoteObject >

  And I call them at the same time:

  public function myFunc (): void {}

  myRemote.getData ();

  myRemote2.getData2 ();

  }

  Will it work? Flex will be "confused" the results of a call with the results of the call on the other? Do I need an AsyncToken? If so, how to use an AsyncToken in the example above?

  Thank you

  -Laxmidi

  I do it all the time. I call the one for control combobox with a list of people, a

  and with these data on people filling a datagrid. Then use the drop-down list to filter the datagrid.

  In your sample well mak result = "getDataListener (event) another" and name it getDataListener2, so there is a separate and a dataprovider for the first to the second. "

  If your going to the same event, the other will replace the first.

  Hope this helps

• test remote call of PeopleSoft

  Hi all

  on FSCM9, tools 8.50 on Win 2008

  in the PeopleTools Debug utility Test Utilities menu PeopleTools, there is a button:

  test of remote call

  When it is launched which node or the destination would be called?

  How to define and set it?

  Thank you.

  remotecall is unrelated to Integration Broker, so it uses no knots, etc.

  It is available to test online calls cobol from the application server.

  https://docs.Oracle.com/CD/E38689_01/pt853pbr0/Eng/PT/tpcd/task_UsingtheRemoteCallFeature-074a63.html

• Stale ASync Remote Call

  I was wondering if someone could point me in the right direction to manage remote calls of stale ASync.
  
  It would be so a scenario where a user clicks on a button to call a remote object but and exit this screen and go to another part of the application. Then the answer comes back another call but now it is flawed because the user has moved and I don't want to do anything with the answer (as showing an alert).
  
  Any information would be great.

  I would record the current location of the user in the application using an application instance variable. Crochet update this var in navigation features, that you implemented.

  Tracy

• Deactivation of the App during the remote call

  Hello
  Basically, I'm looking for a way to circumvent some problems (for me, major issues) introduced by remote calls are asynchronous.
  So, my first thought was that, before a remote call, I would...
  this.parentApplication.enabled = false
  Then, in the callback...
  this.parentApplication.enabled = true
  
  The problem is that I often have multiple applications at the same time and returns the results at different times, etc. I can try to hack things together for specific calls, but my preference would be a single solution to tote by which the application is disabled in all remote calls and becomes enabled again when no appeal is pending. This aspect should take into account that the application should be activated again if there are faults returned, etc..
  
  Some of my remote calls can take a few seconds. And with the user messing around clicking on things during this period can cause major explosions.
  
  Anyone concerned with that? Any tips?
  
  Thank you

  What types of remote calls are you doing... ?

  For something as HTTP Service calls you might just increment a variable static meter every time you make a call (iPendingCalls ++) and then in the event handler for the event result decrement, iPendingCalls again.
  Bind the visibility of a "loading screen" which covers the entire application, an assessment of the question whether iPendingCalls is greater than zero.
  (You obviously need to ensure that all http errors are treated as well in this case.)

  HTH / Culme

• VI first very slow remote call

  My sequences include several call to vi on a PXI chassis.  PXI is running Labview.  The first time that a stage with a remote vi runs, nothing seems to happen as long as 30 seconds.  Subsequent executions of the same step instantly produce unless the code of the module is unloaded.  My hunch is that Labview PXI is looking for all the Subvi remote VI.  Optimize the search may have helped PXI a little path.  But what really helps is to explicitly call the server PXI Labview vi within a module of code runs locally using vi references.  In this case, even the first call is seemingly instantaneous.  If anyone has experienced this?  Anyone understand it?

  Now, I have converted several remote calls VI to prototypes local but the VI path on the remote server specified in the Advanced pane.  I get significantly improve performance.

• Grey call buttons

  For these last days, I was unable to Skype anyone. The video call and call buttons are all greyed out, on all my contacts.

  I just upgraded to the latest version of Skype is not that.

  any suggestions?

  Is your login on Skype online status? The status icon next to your name should be green with a white check mark inside. Try to change the status by using the drop-down arrow next to this icon.

  

• What ports must be used between SX20 and Intouch?

  Hello.

  I'm a junior engineer of telepresence,

  I face to make matching SX20 and Intouch. They have the same subnet mask and even G/w.

  with this configuration, I had things qurious.

  Question,

  1. in the event that they must have the same mask subnet and the same G/W? If so, why?

  2. which ports to use when pair SX20 and Intouch?

  3. how to pass the NAT H.323 mode

  (I know what WE / OFF mode and also how it works, but I did not understand the Auto mode, there is no document on this subject)

  This is just my thinking I hope I'm wrong.

  I'm afriad that Auto mode automatically calculrate the audit of public or non-public of logical IP subnet internal,

  After that, decide Tochange source ip or keep when H.323 call.

  If that, what users have public IP addresses and use them as private with the exception of a few ip for security, IPs

  and they use for NAT 1:1 or PAT to use internet. So how do they check it's private or public.

  Sorry for the reading of inconvient it, it isn't my mother tongue. and I wish the goodness of the expert.

  1. in the event that they must have the same mask subnet and the same G/W? If so, why?

  No, inTouch able to pair with the codec of subnet different until properly configured gateway IP address.

  2. which ports to use when pair SX20 and Intouch?

  SSH

  3. how to pass the NAT H.323 mode

  Please see the https://supportforums.cisco.com/message/3794585#3794585 which had the same discussion.

• SX20 and link ISDN with TC6

  Hi guys,.

  I recently upgraded a SX20 and link ISDN to the new TC6 and after the upgrade, I can't make ISDN call.

  I can see and manage the ISDN link from the SX20 configuration web page, but the status of the ISDN connection is: error, SIP not saved.

  I use H323 network and I don't use SIP between SX20 and ISDN link and with the old version, I could receive and make calls. Now when I try to dial the ISDN using the new interface TC6 endpoint indicates that it does not find the ISDN link.

  Thank you for your help,

  Adrian

  Hi Adrien, Valentine's day.  Theres something happens with outgoing enabled on the link and the Codec for this, and we have two CDETS opened on them.  There are always SIP service is enabled on the Codec with link and link itself.  Codec uses IPV6 local links for the link itself.  Even if the sip xstatus on the codec has its inactive etc, the codec message still SIP REGISTER to the device registration link.  Link runs a FWD SIP process that handles the request.  Sorta like a mini SIP registrar if you want.  Codec will send the message to REGISTER using link-local IPV6 address.  Example of message is less than 200 Ok.

  77582.64 SipPacket PacketDump: Proto: SIP, name: REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0, Direction: outgoing, RemoteAddress: [0000::000:0000:0000:cd39]: 15070, GroupEntity: b27d07c1f5f298c492db68040b320ca6, time: 77582634 content:!

  77582.64 SipPacket REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0

  77582.64 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport

  77582.64 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.64 SipPacket CSeq: 47083 REGISTRY

  77582.64 SipPacket Contact:

  «': 5061; transport = tls >; + sip.instance =»

  77582.64 SipPacket of:; tag = 116a994ac2281c72

  77582.64 SipPacket to:

  77582.64 SipPacket Max-Forwards: 70

  Road to SipPacket 77582.64:

  77582.64 SipPacket allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM

  77582.64 SipPacket User-Agent: TANDBERG/518 (TC6.0.0.876266)

  77582.64 SipPacket expires: 3600

  77582.64 SipPacket authorization: Digest-nonce = "d9605a7da8be22af8c0e7f52b3de4a5f5125fcd3", domain = "MARCIE", qop is auth, username = "djkvvknn", uri is "sip: [0000::000:0000:0000:cd39]"

  ", response ="3b27b753cb9bcf38cc2431b767bce643", algorithm is MD5, nc = 00000002, cnonce ="84addca2a68f6c5f9b657a94653a4bae"

  77582.64 SipPacket supported: replaces, timer, 100rel, gruu, way, way out

  77582.64 SipPacket Content-Length: 0

  77582.64 SipPacket

  77582.64 SipPacket >!

  -----------------------------------------------------------------------------------------------

  77582.65 SipPacket SIP/2.0 200 OK

  77582.65 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport = 41246; receipts = 0000::000:0000:0000:c52a

  77582.65 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.65 SipPacket CSeq: 47083 REGISTRY

  77582.65 SipPacket of:; tag = 116a994ac2281c72

  77582.65 SipPacket to:; tag = e84d13204776ebc2

  77582.65 SipPacket server: fwd

  77582.65 SipPacket Contact:; (+ sip.instance =""

  77582.65 SipPacket Content-Length: 0

  77582.65 SipPacket

  77582.65 SipPacket >!

  -------------------------------------------------

  I removed my own addresses, so you get the picture here.

  It is the same for the link.  Link will send REGISTRY as well to himself.

  Even if your using H320 as outgoing Protocol call, messaging between the codec and the liaison unit is still SIP as the outgoing call is still SIP of the codec for the link even if you chose H320.

  You can see all happening all by running: Journal ctx sippacket debug 9 and connect the output to see the messaging back and forth between devices.  This is why the Service SIP on the codec cannot be disabled.

  The outgoing enabled on both devices and it records not as what Adrian has met is odd. So the question has been filed and is under investigation.

  CSCue57128 - SIP in a strange state connecting to link ISDN (Codec)

  CSCue73049 - outbound SIP on ISDN link activation causes lose her registration (link)

  These are new, so the visibility may not be there yet.

  If you see a problem with the link is not not able to register, check to see if outgoing SIP are enabled on the link.  If so, turn it off and start.

  Do the same on the codec as well.  Disable outgoing SIP and restart the computer.  There may be some cases, you do not see this, as the investigation continues with the bug above two ID's

  I hope this helps.

  VR

  Patrick

• SX20 and sharing of presentations

  Hi all

  I have a few questions about how the SX20 sharing presentations - the installation program will be as follows:-2 offices of each with the following:

  Installed SX20 and a single screen

  input video via HDMI and entry of presentation (laptop) through the VDI-I have

  WAN is tbd based on the required BW

  With a video call in progress, when a presentation is launched for a while, this effect may have a split two showing - what is the end of the screen with the video and the presentation receive?

  Can the end manipulate their display (they receive 2 video stream), or is it a single video stream based on what sends the originating end?

  What is the requirement of BW coming out at the end of starting (it is the sum of the video and the presentation of the flow)?

  Thank you!

  End receives two separate video streams, and you should be able to switch between different layouts on far - end to change the on-screen display.

  Bandwidth call will be always lower than the default bandwidth allocated by placing the call. When the presentation is shared, unit automatically adjusts the bandwidth and the proportion in which the bandwidth gets divided between the presentation and the main power is defined by the configuration. By default, it is 5:5 (1:1).

  Hope that answers your query.

  BR,

  PS

• Get the list of virtual machine names and addresses IP to a specific folder

  I am trying to get a list of virtual machine names and the IP addresses of a specific folder in vCenter. The problem is that there are several files with the same name in different folders. I need to know how to specify the level folder higher in which lies the customer10 folder. Here is an example of my current script that pulls all the info from the virtual machine of all folders named customer10:

  Get-vm-location customer10 | Select Address Name,@{N="IP." E = {@($_.guest.) (IPAddress[0])}} |
  out-file c:\VM_IP_Addresses.csv

  The PowerSHell engine is to 'know' the function before you call it.

  Save the function in a .ps1 file.

  Point source then this .ps1 file. Make sure that you are placed in the directory where the .ps1 is stored, or use the full path

  PowerCLI C:\ >. ./GetFolderByPath.ps1

  Note that there is an empty space between the 2 points!

  Now you can call the function

  PowerCLI C:\ > Get-FolderByPath-path MYDC/myFolder. Get - VM | Select the name...