SX20 and sharing of presentations

Hi all

I have a few questions about how the SX20 sharing presentations - the installation program will be as follows:-2 offices of each with the following:

Installed SX20 and a single screen

input video via HDMI and entry of presentation (laptop) through the VDI-I have

WAN is tbd based on the required BW

With a video call in progress, when a presentation is launched for a while, this effect may have a split two showing - what is the end of the screen with the video and the presentation receive?

Can the end manipulate their display (they receive 2 video stream), or is it a single video stream based on what sends the originating end?

What is the requirement of BW coming out at the end of starting (it is the sum of the video and the presentation of the flow)?

Thank you!

End receives two separate video streams, and you should be able to switch between different layouts on far - end to change the on-screen display.

Bandwidth call will be always lower than the default bandwidth allocated by placing the call. When the presentation is shared, unit automatically adjusts the bandwidth and the proportion in which the bandwidth gets divided between the presentation and the main power is defined by the configuration. By default, it is 5:5 (1:1).

Hope that answers your query.

BR,

PS

Tags: Cisco Support

Similar Questions

  • Virtual WiFi not presentation, it disappears from the network and sharing Center.

    Original title: Virtual WiFi not presentation

    Hello

    I created Virtual Wi Fi cmd (netsh wlan), first it was created and posted his icon in the network and sharing Center, after that show how I disabled it from the network and sharing Center by clicking on the icon and pressing the button disable I pressed off it disappear from the network and sharing Center.

    Can someone help how to activate it so that I see her back icon in network and sharing Center.

    Thank you

    Hello

    You have virtual map of Wi - Fi enabled in Device Manager?

    This problem may occur if network settings are changed.

    You try to run the following command check if it helps.

    a. press on the key Windows + X.

    b. click on (Admin) command prompt.

    c. type the command netsh wlan start hostednetwork and press on Enter.

    If the problem persists, I recommend posting your query in the TechNet Forums to get help:

    8.1 Windows networking forums

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • Windows Vista connected online but not shown on network and sharing Center or on the taskbar, leads to other problems

    I have a Dell Inspiron 1520 running on Windows Vista, my router modem is a Motorola SURFboard SBG901. A few months ago on this computer, I couldn't see that I was connected online either from right down icon in my taskbar (it shows just two monitors with an 'x', that when you highlight on he says "not connected, you are currently not connected to any network.")  I don't see it on my network and sharing Center which States: "not connected wireless connections are available." In terms of network it shows that my PC and then the line that has an x on him. If you click the x, or select diagnose and repair, he informs me that all is going well with my computer. If I go to connect to a wireless network, it shows that I'm connected to my network ready. I open one of my browsers and they all work very well, I can access any site without problem. I was not embarrassed with him at the time, but since then I moved into a new House and have a new service and everything, with this motorola modem cable. my new wireless network is a network unsecured, which of course, I want to fix it. I can connect to this network, but I can't access it through Windows properties to make sure. I read the manual of the modem, telling me to connect through an ethernet connection and access configuration manager using the ip address of my router on a browser, but which does not charge or the other. I have other devices (Ipod Touch and PS3) wireless I got other people come computers and they all detect the network but cannot connect to it. Thanks for any help.

    Hello
     
     
    I would like to ask you a few more things.
    1. how many network connections you have created?
    2. are there multiple NICs installed on the computer?
     
     
    Since this is a common problem and many users have solved this problem by using different methods.
     
    This can also occur if you frequently use several type of internet connections such as dial-up, Ethernet and LAN.
     
    As the article below also indicates that there could be multiple reasons for the same.
    The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected
    http://support.Microsoft.com/kb/945925
     
     
    Method 1.
    I ask you to remove any network connection if you have created and then check.
     
     
    Method 2.
    For control please check in mode safe mode with Networking if the problem exists.
    Here's how:
    a. restart your computer.
    b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
    c. using the arrow keys, select the desired option of Mode without failure.
    d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
    e. when Windows starts, use check and Internet explore if the problem persists.
    For more information, see the articles below.
     
    Troubleshooting in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
     
     
    I hope this helps.
     

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows 7 64 bit... ""? "shows"See the whole map"in the network and sharing Center window"

    Hi guys

    I've been struggling with this problem for a few weeks and need help. When I open the control panel; Network and Internet; "Network and sharing Center", at the top of the page to the right, I have an option to view the connections of the network (see map). The opening I find a big blue '? ', with 2 solid lines from my computers to the "?", with the word "Unknown"under the present'?", then 2 solid lines go to the router... It's a wireless network must therefore a double line broken and not solid and obviously not '? I can fix this problem by changing the Properties tab 'Advanced' from the WiFi transceiver on each of the computers. Once I click OK, the computer the fact thing... and the blue "?" disappears and the network is 100% functional. Putting computers into sleep or restart... and I have the '? ' on the respective computer which itself was removed from the network after a reboot. This happens on 4 computers on the network, all the Windows 7 64-bit, 2 notebooks, desktop computer 2!... Still problem, all corrected in the same way. Until the '? ' is corrected I show other computers in our network at the bottom of the window under the label:-"the following peripheral discovered may not be placed in the plan.» Click here, etc. etc. Once all 4 computers are patched, I show a perfectly displayed network... I'm open to any ideas... Thank you

    The question mark appears when you return from sleep if interconnect them (Network Interface Controller) is allowed to turn off to save power.
    This can be disabled if you wish

  • My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

    My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

    Same thing here.  Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)

    I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies.  The system cannot find the specified file. "It started after restarting the Windows Update as well.  I imagine that the two are related in the same problem to iCloud.

  • problem connecting to TCP variables and shared help

    Hello

    I have a project (host and a device in real time) using variable static as well as TCP to send images over the network. I am familiar with the use of TCP in labview but never used TCP and shared variables in the same project before.

    I receive the error 63 off the open TCP connection. This only happens if an executable file is trained and deployed on the device in real time.

    Is there something to watch if the use shared variables and TCP?

    Thank you

    JChec

    Thank you Nate

    Fiddled a bit and found that the TCP worked great if I deployed from another computer. Thanks for the links, they were good reads

    JChec

  • Memory dedicated and shared on the W700?

    Title says it all... Graphic how dedicated and shared w700 with i5 and hd 4000 there?

    Thanks in advance

    The W700 features 128 MB of memory dedicated video, with about 1 632 MB of shared system ram.

  • Can't see installed and shared printer

    I can't see my hp printer installed and shared on a new Lenovo A58e ThinkVantage Desktop PC with windows XP from ThinkPad running windows XP.

    I have set up working groups as well, appropriate manually and by the network installation wizard.

    I have a checked and made sure that the file and printer sharing are enabled in the network adapter properties page.

    I checked in the Toolbox of Lenovo and it says that the file and printer sharing is enabled, so the printer is shared also.

    I also disabled McAfee firewall and Windows Firewall.

    NOTE: I met a similar problem before with ThinkPad Laptops, when the file and printer sharing would not stay active in the properties of the device, found the problem being to think software, specific to 'Think access', the software kept turning off files and printers, sharing, so I allowed him by the profile of the software Manager, and all laptops could see file sharing and printer.  However I don't see any 'Think access' software, just the 'Lenovo' Toolbox

    Thanks for your time, everyone.

    go to the network properties and install the IPX/XPS/Net bios strictly only for printer sharing network card only.

  • Duplicate "My documents" and "Shared Documets" Folders in explore. __

    I use Windows XP Pro, explores under the Documents section and the definition, user 1 "My Documents" folder.  There is also a folder under C:\ 'The documents of the User1' this file is identical to 'My Documents'

    How can I remove or remve the c:\ 'User1 Document' folder?  I don't want to duplicate files.

    The same thing is happing with "Shared Documents".  I have a folder under C:\Documents and Settings\Shared Documents.   And a second under C:\Shared Documents.   The system won't let me delete, reset or move.   Any help please!
    Thank you

    The User1 Documents and Shared Documents, you can see directly under C:\ are shortened. Leave them alone. You have only to a true User1 My Documents and Documents shared under C:\Documents and Settings. MS - MVP - Elephant Boy computers - don't panic!

  • Cannot turn off or disable password protected sharing the network and sharing Center

    I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

    I tried to disable Avira Antivir.

    I enabled the guest account and set its password to a string explicitly empty with net user guest «»

    Nothing helps.

    svampi,
    This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

    http://support.Microsoft.com/kb/947232

    Let us know if this can help, or if you still need help.
    Thank you
    Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Network and sharing Center shows not connected, but the computer is connected to the wireless network

    When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

    Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

    Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

    Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

    It will be useful.

  • Network and sharing Center (no answer)

    I have been using Vista Home Premium on a laptop Toshiba Satellite. I remember not exactly since when, but lately when I opened the icon ' currently logged in ': l to the taskbar and click on it and open CONNECTIONS current or CONNECT or DISCONNECT or NETWORK AND SHARING CENTER, it freezes: changement. t gave me a lot of problems... Please help... I tried Googling through and used commands like:

    1. net localgroup "Administrators'"NT Authority\Local Service"/ Add

    2. to turn off the automatic setting:
    Run as administrator command prompt.
    Type: "netsh interface tcp set global autotuninglevel = disabled" (without the quotes) and press ENTER.

    You may also need to run this command:
    netsh interface tcp set global rss = off

    To activate the auto adjustment:
    Type: "netsh interface tcp set global autotuninglevel = normal" (without the quotes) and press ENTER.

    To view the current TCP settings:
    Type: press and "netsh interface tcp show global" (without the quotes) to enter.

    I don't even know what they asked me to do, if it is correct or not, but I did and still no solution...: s: s: s

    Any yelp would be appreciated!

    Beppe!

    Nothing is perfect!... .but it should work!

    B3PPE,

    See that article following (http://support.microsoft.com/kb/929833) if it can help you to manually replace the files that SFC could not fix, it also gives you measurements on log file filtering so that only unsuccessful repairs of SFC are listed. Please note that the best source for replacement files would be a sound installation of vista with the functions you want to work.

    I will add to check your hard disk for errors, as corruption SFC could be linked to it. For details, see check your drive for errors .

    Our final recommended option for the problem that you encounter will be a Vista repair install:

    <><><><><><><><><><><><><><>

    You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or a level facility.

    1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

    2. on the Install Windows page, click install now.

    3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

    4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

    5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

    6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

    7 follow the instructions.

    Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

    <><><><><><><><><><><><>

    It is always advisable to backup any and all important data before continuing with the major changes to your system. Please see: methods for backing up your files.

    Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

    <><><><><><><><><><><><><><>

    Only a clean installation may shrink toward the low enough differences to isolate what causes this scenario. There are already has with your file system corruptions, we can't go until this is completely isolated. Please let us know if a reinstallation of your operating system is an option for you at this point.

    <><><><><><><><><><><><>

    Report your results so that we can help you. Please use the community support for Microsoft Vista.

    Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • restore service dependency for the network and sharing Center

    How to restore the dependency service or group who couldn't start for network and sharing Center?

    Hi patto1708,

    If it was something that was already previously and failed after certain activities on the computer for which you are not aware of, then the best possible thing to do is run a system restore. This will ensure that your computer is back to operational status.

    For more information about the system restore, you can see the link: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

    Or you may need to check for the dependency of the network and sharing center services and start them manually when they are stopped manually.

    See the link: http://windows.microsoft.com/en-US/windows-vista/Manage-services-in-Windows-Vista-from-Windows-Vista-Inside-Out to learn more about how to manage services in Windows Vista

    Kind regards

    SAP U G - Microsoft Support

  • Network and sharing Center could not load the

    Questions:
    -Network and Sharing Center: Page failed to load
    -Unable to connect to internet, but says that it is connected to a network (have three PCs in net)
    -Guest of the continuous window - "problems and reports no longer."
    -By opening system in Control Panel, said the "Installer could not load display.

    It's the question driving me crazy... Anyone had this problem before?

    Hi kyungturner,

    Please use the forum for Support of Vista,

    You have anything installed recently? It sounds like the system could have a corruption.  Save all your data prior to perform a clean boot to further diagnose the problem:

    http://support.Microsoft.com/kb/929135

    If the clean boot does not work, try a SFC scan to repair system files:

    http://support.Microsoft.com/kb/936212/

    Let us know if this helps solve the problem, Kevin
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

    I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

    Hello

    Method 1:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    You can also view the related items for more information.
    The problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    Method 3:

    Setting up a wireless network

    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

    Wireless network card: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

    See also:

    Connect to a network with Windows Vista wireless

    http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

Maybe you are looking for

  • Satellite U205-s5057: Vista SP1 auto update?

    On my Satellite U205-S5057 with Vista, I have the "automatic updates" turned on.However he has never downloaded and upgraded to SP1. I understand that it should not so until some driver software has been updated because there have been problems with

  • Single sampling Point Acq

    Hello, a little info on my system and I to start. I'm under LabVIEW 8.6 and using the NI USB-6259 box as my DAQ hardware. I'm new in the world of only having been LabVIEW use this configuration for 3 weeks (but a nice step to the top of the Win95 sys

  • LaserJet Pro M1130: how to download printer driver is no longer available

    I recently bought an Acer Aspire running on Windows 10.  As the laptop lacks a CD player, I can't install the printer driver for my MFP HP Laserjet Pro M1130 using the CD that came with the printer.  This printer is not listed on the site of HP... Ho

  • V2.20.21 HP CoolSense dv6 windows 7The i3 processor

    Hello Had the dv6 since a few months now and I am generally happy with it. One thing that I do however find it boring, always active fan at regular intervals. I'm not a gamer and use the laptop mainly for maintaining accounts, navigation, play videos

  • is that what my app name too generic?

    My application is called Geography Quiz, I don't know if it's too generic and I should call it anything else? Suggestions?