xbr65x900c and HT-CT790 no sound, showing not not under the list of the bravia sync devices and not under the control of home theater

Similar Questions

• Pavilion dv6-1053 cl. Some sounds, but not on video. Vista Home Premium 64-bit.

  This had happened in the past and a reboot would be the cure.  Now restart does not clear the problem.

  I checked Windows Update and found two recommended updates related to sound.  Installed both and my problems seem to be resolved.  But came back.  No sound on the videos again.

• Diagnose Windows Update does not trouble; said needs change to control panel home computer is not found; get a sound error

  Windows update install not about 1/4 of the updates.  The diagnosis of accreditation site Fix Web does not run; said needs to change to the Control Panel home computer that just sounds wrong asked what computer to find.  Nothing in the regular Panel reports.  How to fix?

  Hello

  1. you get any error message?

  2. what Microsoft fixit you talking?

  3. were there any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Check out the link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Installed the Windows updates now sound does not work.

  I used the windows update Center yesterday and installed the updates that were for my computer, now my sound does not work. When I try and open "Dolby-Publisher of stars", I get this message:

  
  Any help tp fix it would be greatly appreciated as im am not very wise computer.

  Will,

  According to the scenario provided it seems that the problem is that you have updated the drivers for the audio device, but you have not updated the application (Dolby Home Theater - perhaps). If you have two choices, update the application to a version more recent or uninstall the installed update which is relevant to the audio driver (through programs and features - updated).

  See you soon.

• recording bass and the sound is not consistent

  I pulled in a recorded drum track and then add my bass track. Good when playing and listening to headphones but when I play back the bass track is virtually all of the sounds heard. not sure on the volume level and record level as to the definition of remedy if it is part of the question

  Hi marosennc,

  I understand that you are trying to save your bass guitar on a pre-recorded drum track, and the volume is low in the final recording.   You can adjust the bass track audio before recording it.  In addition, once the title is saved, you can adjust the volume of the bass and the drummers individually track track before exporting the file to merge the two.  I would add a few sections of the GarageBand here for you User Guide.

  Record sound from a microphone or an electric instrument

  Racing volume levels

  You can set the volume level of each track, to balance the relative volume of the tracks in your project.

  Adjust the level of the volume of the track

  • In the header of the track, drag the Volume left or right to decrease or increase the volume level.

    

    Note: You may need to resize the track header to see the Volume slider.

  • Option + click on the slider to return to a neutral level (0 dB gain).

  The level indicator in the track Volume slider shows the output volume of the track during playback of the project. You can watch the level indicator when you save to the track to see if clipping occurs on the track.

  Save more Audio takes

  What did the mix?

  When you mix a project, balance you the different parts and mix them in a coherent whole. You can also add effects to the tracks - including the main runway - to change their sound and use automation to create dynamic changes in your project over time.

  Mix generally involves the following steps:

  • Racing volume levels to balance different instruments so nothing is hidden and most important parts stand out in the mix.

  Export songs on the disc

  Take care

• Sound does not work. Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.

  Original title: audio device problem
  just reinstalled windows xp.  Sound does not work.  Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.  Microsoft Fix it, but the best I get is "do not set as default audio device.  The lack of sound recording does show a device.  Ideas?  BTW, I sometimes get static noises out of the speakers.

  Hello

  I suggest you to follow the steps from the link and check if it helps.

  No sound in Windows

  I hope this helps.

• Sound does not work after installing new wireless keyboard and mouse

  I have windows xp Media Center installed the new logitech wireless keyboard and mouse, and now my sound does not work. The speaker light is on, the Device Manager does not show a conflict and said that everything works well, but still no sound. A friend has just installed a new microsoft wireless keyboard and mouse and is having the same problem so I know that's not new equipment. Does anyone else have this problem?

  Hi Red_t,

  Welcome to Microsoft Vista answers Forum!

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to XP Media Center and would be better suited to the Windows XP community. Please visit the link below to find a community that will provide the support you want.

  Windows XP Media Center edition Discussions - http://www.microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?dg=microsoft.public.windows.mediacenter&lang=en&cr=US

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• EVGA Nvidia Geforce 8400 GS issues: [FIXED] screen and the sound does not [FIXED] virgins

  I have a HP Compaq dc5750 I just got an EVGA Nvidia Geforce 8400 GS, and I'm having a problem with it. I disassembled the computer cover and installed, replace the cover, turned on the computer and the monitor not power not on. So I decided that I had to disable the integrated graphics card (ATI Radeon Xpress 1150), then I added the card even once. Still happens... Monitor powers on without the new graphics card. My monitor is 8 years old and lacks a DVI port. I have to connect the monitor to the graphics card to make it work? I want just this card to work.

  UPDATE: white screen problem is fixed, but the sound does not (no audio installed device) even if the audio driver is installed

  Hello

  This kind of question is mainly caused by the sound card driver is not not compatible.  Contact the hardware manufacturer directly to confirm the driver is compatible or not.

  Test the issue with another pair of speakers or headphones, or you can plug the device of reading to another port to see the result.

  In the meantime, you can also see if the playback device is disabled. To do this, please check the following steps:

  1 Please, click Start-> Control Panel-> Sound.

  2. on the playback tab, right-click on the empty square and then click on "show disabled devices".

  3. check if your playback device is disabled. If so, right-click on it and click Activate.

  1. Please click Start, type services.msc and press ENTER.

  2. double-click on Windows Audio.

  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Stop" under "Status of Service" to stop the service.

  4. click on "Start" under "Status of Service" to start the service.

  Reinstall the audio device

  1. click on start, type Device Manager, click on Device Manager to open it.

  2. expand ' audio, video and game controllers ".

  3. right click on your audio device, and then click on uninstall.

  4. check "delete the driver for this device".

  5. click on OK.

  6. after that, restart the computer, the device and the driver must be reinstalled automatically.

  Please check if the problem can be solved now.

  If the problem persists, please install the latest driver of sound card on the manufacturer.

  I found the problem... once again: I had to go to the BIOS and enable Audio integrated. My audio integrated uses Realtek High Definition Audio instead of Nvidia High Definition Audio.

• No sound from AOL 9.5 and Quicken ONLY on Windows 7. Shows no more in the mixer

  AOL 9.5 and Quicken system sounds do NOT work.

  Ideas:

  • AOL 9.5 and Quicken 2010 sounds do NOT work on Windows 7.
  • No error message.
  • Restore the system restore point - worked fine before, now after re-installing AOL and Quicken NO SOUND... but sound of ELSE EVERYTHING WORKS very WELL.
  • All the sounds of AOL under settings, multimedia redefined and all sounds under preferences in QUICKEN. Reinstalled the two programs three times. No program appears under the mixer (should they? because they is not if they should show). Have done all the restoration of sounds under settings AOL 9.5.
  Can't seem to find anything wrong - no problem of sound card with drivers etc, should see the AOL under the soundmixer is not there (or QUicken) and if so - how to show... maybe that's the problem.
  * Also if I go into Control Panel, put to update the default he is a US_AOL (my email) and US_AOL (default)... plus all the regular sounds... AOL sounds have a "yellow" folder if it means something and all the others are white - ALSO when I hit the ' test' button in this area on AOL files... NOTHING... If I hit the test on any of the windows files... works very well. For the next, I hit 'Browse' and set up files... click on them nothing?
  Please help - crazy me?

  Hi D Rizzo,

  Here are some articles that can help you with the problem.

  For Quicken, see:

  No sound or audio during execution of the multimedia functions of Quicken.

   

  Sound problems in Quicken

   

  For AOL, see:

   

  Can not hear the sounds of AOL on Windows

   

  In addition, given that this problem is related to the two programs, please contact software for more support.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Display the source shows not only HTML, but also external JS and displayed in a format that is unorganized, how is?

  When I use the view source feature, the pane shows not only the HTML code, but it sticks in all Javascripts that are in an external file. In addition to this all dashes went making it virtually unreadable.

  I have this problem with each monosite, I try to view the source of the. I turned in and uninstalled all add-ons. Starts in safe mode. But nothing seems to work. I got this in firefox 3.6 and upgraded to 4 it would fix, but is not hope.

  It's strange. How about trying to reset all preferences of view_source to their default values.

  Talk openly about: config (type or paste Subject: config to the address bar and press enter)

  In the filter box, type or paste view_s

  When preferences are displayed, do a right click and Reset those appearing in "BOLD" to return to their default values.

  A little luck?

  Edit: Oops, for Mac, read 'right click' like what you normally do to display a context menu.

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Radeon hd5450

  I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

  Hi Edrey Davila,

  1. what operating system is installed on the computer?
  2. are you sound the computer?

  If you connect your computer to the TV using a HDMI cable, try the steps from the following link:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

• When I unplug my headphones the sound does not go to my regular speakers and also the reverse happened... logitech headphones... HELP Please

  When I unplug my headphones the sound does not go to my regular speakers and also the reverse happened... logitech headphones... HELP Please

  Hi MaryLitrel,

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  How to update a sound card driver in Windows Vista and Windows XP

  http://support.Microsoft.com/kb/166774

• my sound does not work - IDT High Definition Audio CODEC - shows Code 10

  The sound did not work for about 6 mos

  I uninstalled and reinstalled the IDT High Definition Audio - and every time - there is an error on the re - install.

  Hello

  1. do you have service pack 3 installed on the computer?
  Update the drivers for your audio device should solve the problem.

  Method 1
  Update through Windows Update hardware device driver. To access Windows Update, see the Microsoft Web site at the following address:
  http://update.Microsoft.com

  Method 2
  You can also update the drivers of the provider's Web site. Follow the installation or update.
  See also the links below:

  How to fix sound problems in Windows XP?
  http://support.Microsoft.com/kb/307918

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:
  http://support.Microsoft.com/kb/943104

• Sound does not work on my computer and the 'secret' is not on. HE WORKS AT HIOME WHEN PLUGED IN MY SPEAKERS... IAM NOT HOME NOW GET OUT ON THE ROADL

  My sound does not work on my computer... It worked when pluged in my speakers at home... I'm not at home so no speakers and I can not get any sound. I checked mute and is not clicked on also the volume upward all the way. What else can cause the sound works do not? Help is greatly appreciated.

  BJ Gawle

  Hi B.J.Gawle,

  Method 1

  Looks like you're using a laptop and this would happen if the default audio device is not set to internal computer speakers.

  (a) open the Control Panel.

  (b) double click on the sounds and Audio devices icon.

  (c) click the Audio tab and under audio playback, select the audio device on the laptop.

  (d) click apply and restart the computer, check to see if it helps.

  Method 2

  If fails it above step then check out the link below and run the Fixit tool available, check if it helps.

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/AudioPlayback/