List of the attributeID for NBI first Collab v11

Similar Questions

• Hello, how can I get the update for adobe first pro 2003?

  Hello, how can I get the update for adobe first pro 2003?

  No, the original CS will not work on Windows 7 and old products are more supported, anyway:

  Error: Unavailable activation server | CS2 or Acrobat 7, older products

  Mylenium

• How to remove items from the list of the orphan for a version

  How can I remove the orphaned members for a specific version without having to remove them manually. I nearly 90000 members in this list, and I can select only 5000 at a time.
  
  I was hoping that if we copied the version to a new version, that it would not bring in the orphaned nodes but that doesn't seem to be the case...
  
  Thank you
  TD

  I have no connection of DRM to control as much as possible, but here's what I can think of off the top of my head. It can certainly be a better way to do it and I'll think it work tomorrow.

  So, I first list all orphaned nodes in a version of

  i. choose the version
  II. select list > orphan nodes.

  This will probably display a list of all the orphaned nodes and on top, there is probably a backup to file option. If you click on that, all orphaned nodes will probably appear in a flat file for you and you can use the Automator to delete orphaned nodes using the following command:

  Remove the orphan - Version - node

  where '-' means tab order of automator.

  I hope this helps.

  -Adi

• How to connect to the list of the pins for a redeclenchables pulse train

  Hello

  I'm relatively new toDAQmx, especially for the counters. I have problems to determine what pins to plug on the DAQ card. I would like to run the vi described here, but am not sure how to connect the card. I looked at the manual of the X series for the pinout descriptions, but I don't know how they apply to the program on this page. When I connect DOOR a meter, THE, A, B pins, etc.?

  Any input on what to connect or pages that may make how to connect the counters would be very useful.

  Thank you.

  Your most recent post of links to an example more advanced sounding & I recommend that stick you with something simple to start.

  Your first post links to such an an example where the signal of pulse train going out of Ctr0_Out.  Ctr1 is used to make the trigger and the 'break' (enable / disable) Ctr0.  However, much of this stuff is configured using some features of DAQmx such that you don't need to physically connect the pins between the two counters.

  Only physical wiring that you need is to plug your physical digital trigger to the PFI1 signal and connect Ctr0_Out to some external thing must receive them.  As long as your device is called "Dev1", I think this example to work.

  I know there are some docs useful for more general info on the pins meter & behavior, but I don't remember quite so that I have not watched for them for many years.  Meanwhile, here is a * little * bit General description I wrote myself once.

  -Kevin P

• What happened to the drop-down list of the menus for outlook express

  After years without problem, the dropdown menus for the "record" and other titles at the top of outlook express do not appear.

  You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

• Need to get the image list of the workspace for a lov

  Using APEX 5 - what I need to add a lov to a page that will allow the user to select a workspace image (mainly the file name for a future process to obtain).

  Does anyone know the name of metadata table that contains the data of files/images of workspace?

  Thank you!

  Tony Miller

  Los Alamos, NM

  Hello

  Try APEX_WORKSPACE_STATIC_FILES and APEX_APPLICATION_STATIC_FILES

  Kind regards
  Jari

• unwanted items listed in the 'target' for hyperlinks

  I was adding some links to some pdf files and noticed that there is now Https:... referred to in points for my target, which used to have only _top_parent etc I don't know how they got there, but is there a way to remove them. I use DW CS3. Here is a screenshot of what I'm trying to hard to explain.

  Thank you for the help

  

  Are any of these items already in use in some of your pages?

  Also, a virus scan may come clean in such cases as it can be something you downloaded, a page or a number of possibilities, like a virus scan will not 'see' these elements.

• Where is the download for Windows first elements 12 English (United States)

  I could find for German, Italian, Portuguese and Polish, but not English.

  PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 12: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html

• CREATING AUTOMATIC LONG LIST WITH THE HELP OF CRITERIA FOR CANDIDATES

  Hello
  
  By setting criteria, is it possible to automatically create the long list on the system for suitable candidates?
  
  Thanks in advance

  Sounds like you one talks of "matching attributes". This is part of the talent management (or Performance management as it is now known) features. Here, you can assess the ability of candidates to the requirements of competence of employment or the vacancy.

  In iRecruitment, you can identify the vacancies as requiring certain skills. Candidates or candidates can also register what they think that their skills are using the same list. If the corresponding feature of qualities does not have what you want, then it would not difficult to create a report to match the two.

  In addition, in iRecruitment, you can configure the system so that the owner of the vacancy is automatically notified if a candidate registered and meet the criteria of your holiday.

  There is probably more areas of application that could also help, but I hope that gives you something to go.

  Concerning

  Tim

• replacing the screen for HP DV7 7080el

  Hi all, this is my first post. My laptop HP DV7 7080el fall and now the screen is broken. The pc works well if connected to an external monitor. I am looking for a replacement of the screen. Is there someone who could tell me where to buy it?

  Thanks for a response

  Hello

  HP parts listed in the manual for Billboard-
  17.3 inch, glare, FHD (1920 x 1080) display panel, 681991-001
  17.3 inch HD (1366 x 768), BrightView display panel, 681990-001

  Manual: http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf (Page 4, 28)

  Data sheet: http://support.hp.com/us-en/document/c03219767

  Your laptop came with Billboard with a resolution of 1600 x 900 backlight LED HD + BrightView, 17.3 "but that the part is not listed in the manual.

  The best way to get the screen replacement is to remove the screen and search for the part number on his back. You'll have to do it anyway. Check the manual that I gave, to get the R & R procedure.

  This video shows a way out just the Panel:

  http://www.YouTube.com/watch?v=JXjIkD7IQOg

  Once you have pulled the screen you to search both google, you can get the HP part number and manufacturer part number.

  I am not able to find the part supplied with your laptop from HP Web part Surf site, you can also try:
  PartSurfer.HP.com

  After obtention getting the part number, look for the HP part store or through Online stores.

  Concerning

  Visruth

• HP Pavilion f - 114 dx downgrade win 8-7, the search for drivers

  Hello

  I've passed my f - 114 dx, the Intel Core i7-4510u pavilion, the cpu @ 2.00 GHz 2.60 GHz. 6.00gbRam, OS 64 - bit win8 to win7Pro.  Trying to find the drivers section to access the internet, but couldn't find the page?

  In addition, when looking for drivers, there a number of sites offer to tell you what you need, if you download their app. I'm not comfortable with this, as they say often undesirable in your computer. Does anyone know of a reliable site for this?

  Txt in advance,

  MJKOP

  Hello:

  You should be able to use the W7 x 64 drivers and this model on your software.

  Do not use the BIOS or firmware files well.  Those who are strictly specific to the model.

  http://support.HP.com/us-en/product/HP-Pavilion-17-F000-notebook-PC-series/6936220/model/7174486/drivers

  The list of the parts for your model indicates that you need this driver for the wireless card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140311-1&cc=us&DLC=en&LC=en&OS=4063&productOid=7174486&sw_lang=&product=7174485

• Windows 7 can not find the driver for the shared printer, IBM infoprint 1352

  through the network, that I have connected to my infoprint 1352 (on a XP machine), but when my 64-bit machine w7 is to install the printer, he said:

  'No driver found - windows cannot find a driver for IBM Infoprint 1352 on network. To locate one manually, click on OK. Otherwise, click Cancel and consult your network administrator. »

  When I click CANCEL, another window comes up with "unable to find the" * INF 'pilot'. "

  Help

  Hello

  The IBM infoprint 1352 is not compatible with Windows 7 64 bit and this must be the reason for the question.

  For more information see the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=IBM infoprint 1352

  I suggest you to refer to the link provided below for the list of the drivers for the printer.

  http://www-01.IBM.com/support/docview.wss?uid=psd1P4000300

• Acrobat is not listed in the Manager of my application, how do I install it?

  As far as I know, Acrobat is supposed to be included in the creative cloud subscription, but it is not installed on one of my computers running CC, nor is he is listed in the application for the installation manager. I have a computer running Windows 7 32-bit and 8 64-bit operation.

  Hi shauna_heinicke,

  Is that what you have already installed a trial version of Acrobat on your machine. Go to control panel and check for Acrobat and uninstall if already installed.

  Go to Name/AppData/Local/Adobe/OOBE/opm.db C/users/user and delete opm.db.

  Connect to CC Office and check for Acrobat. If still the same number then uninstall CC desktop, run the cleanup tool and install CC desktop from here: https://creative.adobe.com/products/creative-cloud .

  Launch and login on the CC Office and Acrobat should be there.

  Kind regards

  Romit Sinha

• syntax question (maybe the pros for the Tween class?)

  I posted it earlier, but no one answered. Maybe my post was a bit confusing. I'll try again.
  
  Here is the code (> comboFunc is the problem of children):
  
  var tweenType = [_root.tweenOptionsComboBox.selectedItem.data];
  var easeType = [_root.easeOptionsComboBox.selectedItem.data];
  var comboFunc = [tweenType + easeType];
  This.Tween = new Tween (this.ring, _xscale, comboFunc, 0,100,5, true);
  
  Basically, there are two drop-down menus of the comboBox on the root. Lists all the options for Tween (Regular, Bounce, elastic...) and all options for speeding up (easeIn, easeOut...) How can both dynamically together without a long switch statement...
  
  any ideas appreciated.
  
  Thank you
  
  Stephan
  
  

  then it is a limitation of the combobox. It cannot process data referring to a function.

  to remedy this, create your own combobox.

• can I change the behavior for firefox menu to open instead of opening the 1st option lists?

  is it possible to adjust the way the orange menu firefox behaves when you click an option?
  currently hovering on an option opens the list below (for example, a list of bookmarks for favorite option, or a list of pages visited for the historical option) and clicking it opens the first item in the list.
  I would like to change this so that the list is opened when you click an option, since it is not possible to hover using a touch screen.
  It's quite annoying when the management of bookmarks screen opens if all I want to do is bookmark the current page (which is not possible in this form)

  The orange button Firefox will be gone in Firefox 28 or 29, in releasing the Australis of redesign of the User Interface.

  There are other ways to save a new bookmark. A double click on the star to the address bar does not work on a touchscreen device?

  https://support.Mozilla.org/en-us/KB/use-bookmarks-to-save-and-organize-websites