listen to prerecorded personal cd

Similar Questions

• Cannot start the listener in Oracle 10 g personal edition

  Hi all
  I'm trying to start the listener on my personal edition of Oracle 10 g. I tried this category ' Windows tools administration, click 'Services '. I also tried the command line. The two methods fail. Here are the error messages for each method:
  
  
  In "Services" in Windows:

   
  The OracleOraDB10g_home1TNSListner service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service. 

  In "Command Line":

   
  D:\oracle\product\10.2.0\db_1\BIN>lsnrctl start 
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-MAY-2012 09:47:02 
  
  Copyright (c) 1991, 2005, Oracle.  All rights reserved. 
  
  Starting tnslsnr: please wait... 
  
  TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production 
  System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.ora 
  Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log 
  Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc))) 
  Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ABCDEFG)(PORT=1521))) 
  TNS-12542: TNS:address already in use 
  TNS-12560: TNS:protocol adapter error 
    TNS-00512: Address already in use 
     32-bit Windows Error: 48: Unknown error 
  
  Listener failed to start. See the error message(s) above... 
  
  
  D:\oracle\product\10.2.0\db_1\BIN> 

  Ideas have this problem could be solved.
  
  Thank you in advance,
  
  Seyed

  Seyed_G wrote:
  In the past, I could start the receiver under the heading 'Services', but no more.

  Listening port Oracle does not start when the OS is down.

  Difficulty at the OS level, which has changed or ruptured.

  Oracle is a victim; not guilty.

  This system gets its # IP via DHCP?

  LOOPBACK connector has been installed on this system?

• "Beep code" understanding

  Hi all

  I have a 2 years old compact-hp pasario sr5050nx running 32 bit vista premium. From the start, it beeps and does not load vista. I am trying to understand the code. It emits 3 beeps, and then goes a little aaaahhhhhhhhh. Is it a long code or it's just the beeper winding down like a sireen? She does twice. Any help on this matter by someone with experience would be surely appreciated. Thank you!!

  Last updated on August 21, 7: 00 a.m. et

  After several days of listening to all persons named Dakkar, Mushima, Poinyanim, Paripiewa and tastes at HP email and light weight suggestions from here, I thought that my old computer for 2 years ol was dead. HP said it takes less than a new motherboard.  I bought a new and quickly took to Best Buy to get some fresh disk for backups when I fell on the desk of the Geek squads and a nice employee begins to speak with me. I told her about my old computer and he said to go and I'll watch for free, if what ya got to lose?

  Jump on the Harley and was back in a Flash. It it turned on and started walking around talking with her friends, and I thought hmmm more of the same ol' Bull. He walked over and said are just as I thought. The hard drive is toast... yaaaaa toast... After a sale on what he could fix because I said could I do it myself. Know that he don't know if you know a little about them. I said that I am a quick learner for that kind of money. He gave me some tips and referred me to the hard drive section.

  Just finished loading the back ups ordered from hp vista more 88 updates (yawn) and... shes back in the saddle again... Thanks for your help... Any who need a mic DX7500. tour?

• Granville Phillips 358 RS232, PXI-8430 Module Communication

  Hello

  I'm trying to contact the 358 Granville Phillips Micro-Ion controller, but it does not. I send "IG1 ON CRLF" and it just expires. I wonder if it's the Board switches that are not in the right setting of. We put all the switches to factory settings, is there a switch that is not the default setting to allow communication with the PXI-8430/8?

  Thank you!

  For a reason that we call the RS232 standard

  Regularly to weld 2--> 3--> 2 standard

  If 2 and 3 are exchanged, the machines are crying out to the same line and listening to the person on the other line...

• Cleaning of the library

  I am very new to Captivate, then perhaps the answer here is very easy... I have a presentation that I use text-to-speech on. I tweeked a few notes several times to make it sound better. Captivate says I can delete "unused" clips from the library, but when I finally found the library, file names are gibberish... I have to listen to each person to decide which ones I want to keep... and sometimes the differences are minimal. So, how to identify those who are not in use? Captivate says I can, but it does not explain how. Help!

  Have you tried the Quick Menu (right click) and the option "select unused items"? Or do you really want to identify each clip before you delete?

• Composition of music to listen to my music?

  Why is iTunes saying that I need a music subscription and allow data usuage listen to my music as well as having to redownload the songs I already downloaded on my phone?

  It is my understanding that you will still have access to your music. The newly developed Apple music app to date has features adapted to new music subscription service (optional) Apple. If it is that you have to 'download' your music pre-paid for your device, which leads me to believe that you have a new phone and need to do a restore of backup or something went wrong by putting your device with iTunes and your music has compromised somehow.

  Confirm that music files are still there in your iTunes or a folder of music, and then connect your phone to your computer and manually synchronize your music or download via the cloud. Whatever it is, do not need to register for Apple's music subscription if you do not want it. You will still be able to play the Beats1 Radio free but limited access to the extensive library of Apple Music from music streaming.

  Personally, I use a combination of Spotify, Pandora and downloaded music on my computer to get my fix. I think that people sometimes too locked up in ' I have to pay $10 / month, so I can get all the latest and best music, "while in reality, most of us listen to random things anyway, so why not just put a bit of effort in curating your own Spotify, Pandora and personal music playlists and settle for that? All do not have a big budget for additional subscription fees. (end rant, sorry) It's only a few extra clicks here and there to do things as I explained.

• Because the updated to 9.3.3 why my iPhone 5s redownload already listen to podcasts?

  I've recently updated my iPhone 5 s to version 9.3.3.  Now, the podcasts that I already listened to are redownloading.  I tried: 1. removal;  2 marking them as played; 3. actually play them and scrolling to the end.  Nothing seems to prevent these same episodes come back.  It is same for a few, over and over and over and over again.

  I looked into communities different assistance and so far, the only remedies are Apple and they involve software patches...  Personally, I have discovered no patches or the means to prevent this.

  It is a long-standing problem that nobody seems to have a solution, not even Apple.

  All you can do is to report directly to Apple as another user affected by this.

  http://www.Apple.com/feedback/

• What is the best bluetooth device for listening to music via laptop

  Device

  What is the best feature of Bluetooth wireless to connect the laptop, if you want to listen to music on the speakers via the laptop?

  I try to use the Sony Ericsson HBH-DS220, but it did not work because the readers that are not available for download... Any help please because I like to play my music from my laptop to my wireless connected speaker
  .

  Hello

  It would be a good idea to work with your local computer store to be sure, everything is matched
  Working togther. Take the laptop computer and peripheral and match them the new device as needed.

  Maybe BlueSoleil can help - it's not free, so you should contact them for their recommendation
  as to suitability for your needs.

  BlueSoleil
  http://www.BlueSoleil.com/

  Bottom left - self-test Mobile tool and equipment check
  http://www.BlueSoleil.com/support/AssistantTool.aspx
  http://www.BlueSoleil.com/download/detail.aspx?TID=26

  ============================================================

  Troubleshooting methods:

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• More than 21 years seen by members of the forum, and no one wants to step up and give "Thank God, a helping hand in setting his problem, so he can listen to religious music? __Cannot the checkbox in Control Panel... fields are grayed out. has tried windo

  After receiving more than 20 views... I guess that PERSON DO want help 'Thank God' by fixing his problem from his computer, so he can listen to his religious music. ???

  Thanks, Hello God

  If you would please provide additional information about you survey, I'd be very happy.

  Please continue with the following support steps listed below...

  -Clean Windows Boot to isolate 3rd party interference

  -Create an another user account and verify if you experience this problem.

  SFC/scannow

  -Disk Cleanup

  -System Restore to a date and time when your computer was functioning normally

  -Fix the Windows Setup (steps are listed below)

  Please proceed to a repair of the OS installation.  In case of failure, please make sure that you back up your data to an external location before performing the repair.  Here are the steps to proceed with the repair.

  To start the repair facility, load Windows 7 and make sure that you are connected to an administrator account. Then, insert the Windows 7 DVD and run the file setup.exe from the menu autoplay:

  Then click install now to start the process:

  Now, uncheck the box "I want to help improve Windows ' and select the optionto go online to get the latest updates for installation :

  The installation process will then search online for available updates, which may take a few moments. Once complete, read the license agreement, then checkthe box I accept and click Next:

  Now, click on the box to upgrade to start the Windows 7 repair facility:

  Windows will then be re - install Windows 7 over itself and you will be informed of its progress as it does. Your PC will reboot a couple of times during this proc

  Once restarted, you are then prompted to enter details of the usual initial installation (for example, the license key, location and time settings). When it is finished, the repair facility was conducted entirely.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to navigate to another screen when I click on BitmapField what listener I have to use?

  Hello

  My requirement is I need to add icons to image in horizontally and when I click on the icon of the image it must navigate to specific screen, so I use BitmapField to display image icons and I added to HorizontalFieldManager but how to navigate to another screen when I click on BitmapField (the image icon) who listens to I have to use?

  Please suggest useful links.  Advanced thanks.

  Concerning

  Sunil.G

  Personally, I prefer to do the treatment that you need directly on the ground rather than using a listener.

  The following code is an example:

  BitmapField bmf = new BitmapField(Bitmap.getPredefinedBitmap(Bitmap.HOURGLASS), Field.FOCUSABLE) {
      protected boolean navigationClick(int status, int time) {
          Screen myScreen = new ();
          UiApplication.getUiApplication().pushScreen(myScreen);
          return true;
      }
  };
  

• BlackBerry Smartphones to listen to classical music

  I just got my Blackberry curve and it's great - except for the issues I'm having with music downloads.  I bought two albums of music on iTunes.  I have not had any problems of synchronization of the current music, I bought through iTunes.  But, when I tried to synchronize of classical music, I bought using the Synch Media app, they will not synch - Proteched (Digital Rights Management).

  I am very confused.  I don't understand how to determine things in iTunes so go to sync or not synch (protected or not).  Also, I could care less where I buy my music.  Is there a better place to buy pieces to avoid this problem?  I assumed that because blackberry referenced iTunes software, it is fully compatible.  Of course, this isn't.

  Any suggestion would be appreciated.  I need to learn this music for my church choir and I bought this blackberry to replace my phone AND my ipod - so the aspect of music is a priority for me!

  Thank you!

  The problem lies in the files of the songs themselves.  Partly to blame is also Apple and iTunes.  When you say 'current' and 'classical' music, are you talking about the time they were purchased through iTunes?  That's probably why your current songs are able to sync and not adults.

  Basically what it comes down to tell the difference in the types of files that you have purchased.  iTunes until recently incorporated a form of "copy protection" called management of digital rights (DRM) in the songs you purchase/download that you would only play/sync these songs on matched Apple software and devices, keeps you simply copy the file and give it to a friend for free to play on their iPod or other player without having to pay for it is marked.  It's a bit like how you can't all just pop a DVD in your computer and copy it to another drive.  You never, through legal means, will be able to play files protected against copying on your BlackBerry.

  The way to tell if an iTunes song is protected against copying is to watch the song info/properties option in iTunes, or check the file extension.  If the extension is ".m4p" it is protected

  To avoid this problem in the future you can either illegally remove the DRM of the song files by using the decryption software, buy single songs in iTunes that are designated "iTunes more" (who are not protected against copying and is supposed to be the new standard for store from now all the songs in iTunes and can cost very) , or use another store digital music such as Amazon, eMusic, Napster, etc. - where they do not apply copy protection to any of their files (although sometimes sacrificing sound quality just perceptible).  Personally, I recommend Amazon because quality is superior to the standard, and the songs are generally a full 10 cents less than the iTunes store.  The only obstacle that you run sometimes is that the selection on these sites are perhaps not as large as iTunes.

  DRM and iTunes is seen by some consumers as a marketing scheme and the violation of property rights - software iTunes is free, but if you want to listen to the music purchased outside of this program, you are forced to use/buy an iPod.  When you buy a CD, it's phsically as your own and you can do whatever you want with it - play on any CD player, sell, lend it to someone listening, etc.  With DRM encrypted music which is not the case and you can't do any of those things, but you're still paying the same amount of money for it, as if you were buying a CD, feel so much, you should have the same capacity/rights.

• "When I try to listen to music from my external hard drive, I get ' E: / Server execution failed"

  Original title: external Hard Drive music does not play

  When I try to listen to music from my external hard drive, I get ' E: / failure of execution of the server "what's?

  Hello
   
  (1) is specific to a specific folder?
  (2) did you of recent changes to the computer before the show?
  (3) what music player do you use?
   
  "E: / Server execution failed" is an error caused by a person who uses the incorrect proxy settings in windows, and windows media player and media center you will encounter errors on this.
   
  I suggest the following methods and check if it helps.
   
  Method 1:
  (a) open the network and sharing Center
  (b) go to network connections
  c) right click of your main connection method and click IPV4 settings
  (d) select Advanced settings, click on that and if you see any information other that automatically detect settings and then delete and check her automatically detect the settings box.
   
  Method 2: I suggest to refer to the following article and perform the steps mentioned by Vivian Xing and check if it helps. http://social.technet.Microsoft.com/forums/en/w7itpromedia/thread/f690ff23-C486-47e7-ACD4-ee6187613ae8

  Warning to be upgraded on the spot: take the backup of all your files of important data before performing the upgrade on the spot.

• A listener by server or a listener instance?  What is the best practice?

  I joined a company owner and new oracle DBA uses a listener and a port (by default) by server.  We have 7 instances of oracle on a server database using the same listener.  I always created a new listener. / netca or make entries manually by database instance. / dbca

  What is the best practice?  My argument for the creation of a separate listener is to be able to restrict connections and accelerator by database using the parameters and the params of the listener.  With a listener, it seems impossible to use several listener settings or settings since all the dB to use it only a listener.  Also if the listener does not have any new connection for all the dB to use it on the server.

  What is the best practice?

  The best practice is what works best for you in your particular environment

  Personally I have found don't have much need to adjust the configuration of the listener for each separate instance so in my environment of each server has 1 single earphone that is shared by several bodies. I can see your points about the benefits of having separated from listeners, but also additional administration required for the best answer is the one that is right for you. Some of the servers I maintain may have up to 20 instances (development) so having 20 listeners is probably a little more work I want keep.

• Error when loading of the APEX listener, appex_rl and appex_rt not found

  Trying to load the earpiece of the APEX, but 'appex_rt is not configured and errors will be ignored ", also for appex_rl, now it is stuck on @48231ms.

  Previous stages of the installation went well.

  He started very well...

  

  then got the errors, but he continued... (see SEVERUS)

  

  final State, another error, now it is stuck

  

  

  Hi Wm Peck 1958

  WM Peck 1958 wrote:

  Trying to load the earpiece of the APEX, but 'appex_rt is not configured and errors will be ignored ", also for appex_rl, now it is stuck on @48231ms.

  Previous stages of the installation went well.

  How do you use ADR/APEX listener? Autonomous/deployed on Java EE server?

  Want to host RESTful web services on your instance APEX?

  Looking at the error you found, it is because:

  During the installation of the ADR, he asked three databases users? : APEX_PUBLIC_USER, APEX_LISTENER and APEX_REST_PUBLIC_USER.

  Whose APEX_PUBLIC_USER is required for the operation of the Applications Oracle APEX. APEX_LISTENER (which corresponds to the configuration of apex_al) and APEX_REST_PUBLIC_USER (which corresponds to the apex_rt configuration) in ADR are required for the accommodation of RESTful services.

  The problem, I think it's that you haven't configured the RESTful services before installing ADR where the APEX_LISTENER and the APEX_REST_PUBLIC_USER does not exist and so the configuration of the ADR fails.

  It is fine if you do not configure the RESTful services (just want to use Oracle APEX), but when the ADR facility you should ignore configuration APEX_LISTENER and APEX_REST_PUBLIC_USER accounts.

  Moreover, I think that you use EA(Early Adopter) version of ADR version 3.0 of knowing, but I think you should go for the stable version of ADR version 2.0.10 Viz.

  The ADR 3.0 configuration is more advanced (complex bit) than the 2.0 because it contains information about 5 database users (i.e., APEX_PUBLIC_USER, APEX_LISTENER, APEX_REST_PUBLIC_USER, ORDS_METADATA and ORDS_PUBLIC_USER).

  Finally, I think you want the instance Oracle APEX for purposes of personal training, using Gateway (EPG) of embedded PL/SQL would be sufficient now as suggested by fac586 here: Re: getting started with APEX after download

  Suggestion: You should post data Services Oracle REMAINS related matters to the appropriate i.e. forum ADR, SODA & JSON in the database.

  Reference:

  • For ADR 2.0 installation guide
  • For ADR 3.0 installation guide
  • Installation of Oracle APEX, with EPG guide.

  I hope this helps!

  Kind regards

  Kiran

• Is there a way I can trigger my characters triggers in the world? I want to listen to with him in the obs and be able to do while ingame triggers

  Is there a way I can trigger my characters triggers in the world? I want to listen to with him in the obs and be able to do while ingame triggers

  Thus, control triggers in CH all streaming a game via OBS (like having your character in the corner and your fullscreen game)? To control triggers CH I believe that enforcement must be active, so I couldn't choose another app/game on PC and press keys to trigger (if I CH running and switch to Photoshop, for example, keyboard triggers will not currently work). But I have not personally tried something like this yet - there must be some sort of solution (2 computers?). I know that we're working on more ways to feed and export your character alive in future versions, so ideally this workflow can be easier on the road.