listener does not stay in place

Similar Questions

• Satellite 2450-201: monitor does not stay in place?

  Hi guys of

  I just wanted to know if anyone has a problem of monitor loose were the rear monitor folds and does not stay in place and is there a simple solution? Or this happens over time?

  Thank you

  Hello

  It sounds like a problem of mechanics monitor on you laptop.
  I don t think that you will solve this problem without any help from the technical person.
  I recommend you contact Toshiba service in your country. Explain the situation and I'm sure he will find a solution.

• Logo do not stay in place.

  I was recently invited to work on a website for someone using Muse.

  How ever that I stumbled upon a pretty annoying problem.

  The logo does not stay in place. I have the logo on the layer 'menu', everything in the menu layer stays when you scroll but the logo... any idea?

  Miller Agritec Inc. <-c' is the website originally

  Miller Agritec Inc.. <-c' is the new redesign.

  Hello

  Have you tried the option 'show '? It is in the toolbar at the top.

  Select the logo image, and then select one of the points in the icon.

  It looks like this:

  

  I hope this helps.

  Concerning

• 6 sec new settings slider switch does not stay on (green)

  Switch used in environments does not stay on (green). When you try to configure the settings of the store, music, Apps and sliding switches books are moving reluctantly to green, stay green for a second or less and then back to white.  I want these settings to stay 'on' (green).

  Check

  Settings > general > Restrictions > accounts > allow editing (checked)

  Note, you must enable restrictions to see/do changes.

• Screen saver does not stay on during the night

  I have problems with my computer screen saver does not stay on during the night.  In addition, we noticed that the computer must be restarted during the night. Instead of the screen saver up and running in the morning, the computer is the login screen.  Our computer is turned on all night and not located to get to sleep.  Ideas or settings that I need to check?

  Hello William,.

  Thank you for the update.

  You can try to follow the following suggestions to solve the problem.

  Method 1: I suggest you perform the clean boot and check if the problem persists because, put your boot system allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform the clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting ' to reset the computer to start as usual after a repair.

  Method 2: I also suggest you to remove the schema of eating plan and create your own plan from the link and check.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  See also:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

  I hope this helps. Otherwise, please free to write us again and we will be happy to help you.

  Thank you

• FRM-10142 the http listener does not work on the name of the computer to the port 80

  Hello

  During the race, the oracle 12 c form a following error message

  FRM-10142 the http listener does not work on the name of the computer to port 80. Please start the receiver or check your preferences of runtime.

  Sandy

  First, you will need to check the SST is running.

  go to admin server url in your browser, click on the target icon that is left top of your admin home go to the http server and then start your ohs1.

  and open your generator of forms go to the updated runtime default url like e.g. OSH, you can find your url such as http://localhost:7777 or http://localhost:7779.

  your full url looks like this format http://localhost:7777/forms/frmservlet or http://localhost:7779/forms/frmservlet.

  Localhost can be your default ip 127.0.0.1 or any static ip 192.0.0.10 address in this format.

• frm-10142 http listener does not

  Hi all

  I am unable to run any form of generator of forms, I get the error frm-10142 (http listener does not)

  tried different ports (8888, 9001, 7001)

  When I connect to the console like this:

  http://127.0.0.1:7001 / console

  and click on deployments (11.1.2) formsapp is listed with the new State

  When I click on environment = > servers the following is listed:

  Name State listening Port

  AdminServer (admin) being RUN 7001

  STOP WLS_FORMS 9001

  STOP WLS_REPORTS 9002

  When I connect to the EM with http://127.0.0.1:7001 / em

  and under Farm_ClassicDomain, I open the forms node, and then click Forms

  then, in the form of deployments, it is empty

  the weblogic server is running

  OS: 64-bit windows 7

  forms: 11.1.2.2.0 64-bit

  WLS 10.3.6

  could it be caused by a recent update for java 8? (java version = 1.8.0_60)

  any ideas?

  KR

  Martin

  If you want to start the console servers, nodemanager must be running.

  Go to you $DOMAIN_HOME/bin folder and user batch file to start servers:

  StartManagedWebLogic.bat WLS_FORMS

  You will be asked for weblogic credential.

  Last output message should be something like this: "server started in OPERATION."

  Then you can try to access the forms.

  Concerning

• ORA-12505, TNS: Listener does not currently of SID in the connection descriptor (code: 2 011)

  I get this error when you try to create a data store for Oracle database of the Disqualification.

  ORA-12505, TNS: Listener does not currently of SID in the connection descriptor (code: 2 011)

  I am able to connect to this database by using the same credentials through SQL, but the Disqualification, I'm not. Do I need to do anything in linux server before the implementation of Oracle data warehouses?

  Thank you

  Ravi

  There are a number of ways.

  1 use a JNDI connection configured in WebLogic and select by name

  2. use the LDAP connection or TNS - see http://docs.oracle.com/middleware/1213/edq/DQEXT/config_dbase.htm#DQEXT202

  3. Add an oracle.xml file in [local disqualification home] / dbconnectors with the following content. This will allow you to select the service name in the standard Oracle data store wizard:

  Class = "com.datanomic.utils.databasespecies.species.Oracle"

  MaxNameLength = "30" invalidnamechars ="" ' >

  %Species.Oracle

  {JDBC:Oracle:Thin:@${service = "srv"? /': "} ${host}: ${port} {service ="srv"? '/' : ':'}${sid}

  Oracle

  {JDBC:Oracle:Thin:@${service = "srv"? /': "} ${host}: ${port} {service ="srv"? '/' : ':'}${sid}

  ${superior (schema = "? user: schema)}

  dbproductname ~ = '(?i) oracle'

  name ~ = ' $BIN\\ [A-Za-z0-9 + /] {22, 24} ==------$\\p {digit} +'

  user = ${user}

  password = ${password}

  FetchSize = 100

  BatchSize = ${export.batchsize}

  void = TRUNCATE TABLE %s

  ALTER SESSION SET CURRENT_SCHEMA = ${schema}

  % host

  % port

  1521

  %Oracle.SID

  Name type

  SID

  Service

  user %

  password %

  % scheme

  %Schema.label

• Listener does not start

  Hi all

  EBS 11i

  Linux 5.5

  We didn't change anything either, but all of a sudden our listener does not start.

  start at $ /u02/oracle/oaproddb/9.2.0/appsutil/scripts/OAPROD_oel5/addlnctl.sh OAPROD

  You run addlnctl.sh version 115.6

  Logfile: /u02/oracle/oaproddb/9.2.0/appsutil/log/OAPROD_oel5/addlnctl.txt

  From process to listen OAPROD...

  addlnctl.sh: leave with the State 1

  
  

  
  

  VI addlnctl.txt

  Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROCOAPROD))

  AMT-12541: TNS:no listener

  AMT-12560: TNS:protocol adapter error

  AMT-00511: no listener

  Linux error: 111: connection refused

  Connection to (ADDRESS = (PROTOCOL = TCP)(Host=oel5.unitrade.local) (Port = 1521))

  AMT-12541: TNS:no listener

  AMT-12560: TNS:protocol adapter error

  AMT-00511: no listener

  Linux error: 111: connection refused

  LSNRCTL for Linux: release 9.2.0.6.0 - Production on June 4, 2015 12:10:14

  Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.

  From /u02/oracle/oaproddb/9.2.0/bin/tnslsnr: Please wait...

  AMT-12547: TNS: lost contact

  AMT-12560: TNS:protocol adapter error

  AMT-00517: lost contact

  Linux error: 32: Broken pipe

  I tried Googling the error but can't find a similar solution for the error

  listener - Linux error: 111: connection refused LSNRCTL - database to stack Exchange administrators

  Help, please...

  Thank you very much.

  Blog of helios to my best friend helped

  AMT-12547: TNS-12560: TNS-00517: Linux error: 32: error during boot to earpiece | Blog of Helios

• I want to uninstall the application, because it does not stay charged and want more on my computer and not perform the steps for removing it, but none does not work for me.

  I want to uninstall the application, because it does not stay charged and want more on my computer and not perform the steps for removing it, but none does not work for me.

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• I have CS4 and updated my OS x 7.5 in Yosemite 10.5 - applications are still there but will not open. He said that I had to restart the computer after which he said that there is an error 6. I have the license key but does not have a place to insert it.

  I have CS4 and updated to OS x 7.5 to 10.5 Yosemite. Applications are still there, but can not be opened. After the restart, the application displays error 6. I have the

  Original key, but does not have a place to enter.

  We recommend that you reinstall the applications. You can use the Cleanup tool to remove the applications and products CS4 download from here.

• ORA - 12514:TNS:listener does not work

  Hi all
  
  
  My Version of DB: 10.2.0
  
  Operating system: Solaris
  
  
  I just stop the database and when try to restart Pb it gives me error like:
  
  ORA - 12514:TNS:listener does not work
  
  When I check the entry from the file tnsnames.ora DB is in the list
  
  but when I do
  
  lsnrctl status
  
  It will not display no services of db which is orcl
  
  can someone help me

  Vikas Kohli wrote:

  DB is now

  one more thing to ask

  Please do not put more than one topic or 'thing' in each thread that is start a new separate discussion thread / topic / problem etc.

  When you try to raise the hot backup rman I get below error:

  RMAN topics, please use the dedicated forum: {forum: id = 74}.

• ORA-12514 TNS: Listener does not currently of service required

  Hi all
  
  
  I created a thread here only three days ago on the question above:
  
  ORA-12514 TNS: Listener does not currently of service required
  
  and I ended install oracle again this time around just after 2 days I'm getting the same problem again. I have not yet published that any same file not open it not even anywhere near her. Can anyone tell me the reason?
  
  Thank you and best regards,
  
  Lucky aka Lastw0nd3r
  
  Published by: lastw0nd3r on August 5, 2010 07:24

  SQL NET should now work for you.*
  If so, please mark as ANSWER

  but where was I wrong?

  the database is not started so the listener did not know the DB Service

• ORA-12505 TNS Listener does not currently in SID

  Hello
  When I try to connect to Oracle Sql developer, error "ORA-12505 TNS Listener does not currently of SID given in connect descriptor". ""
  I use 11 GR 1 material on Windows XPSP2 platform. But several sql works very well.
  Thank you
  
  Published by: user12222356 on April 11, 2010 07:20

  user12222356 wrote:
  This time the Sql developer is connected successfully. But there is not a question of being happy because what happens frequently. Sometimes is connected while sometimes the connection refused... All, it seems, is that SQL Developer connection to the Oracle server depends on luck.
  Is there any solution to get rid of this problem?

  It's a matter of timing.

  First thing that should be launched is the listener. Who should be started on boot. For a laptop or another machine which uses the DHCP protocol, the listener must be configured to talk to the loopback adapter.

  Then the database should be started to talk to listening on the port of sight to the listener - it is applied either with the "LOCAL_LISTENER" database being left to null (for the default listener on 1521). This can be checked by "Lsnrctl status" showing the instance of database such as saved and available.

  Then the SQLDeveloper can start up, pointing to the same host, port, and service/instance, as shown in "lsnrctl status".

• ERROR - ORA-12514: TNS:listener does not know now of immediate service

  Hi all
  Is the problem that I do face when I access oracle 10g database.it was wrking fine a few days back then I installed the developer 10g suite.after I am facing the problem (ERROR - ORA-12514: TNS:listener does not know currently of service requested in connect descriptor) every time I try and access my database.any 10 g help will be very appreciated.
  Thanks in advance
  Mourad

  Hello

  Make sure that you use right tnsnames.ora as you have it installled oracle developer suite after installation of the database so it could change your ORACLE_HOME as a result of developer. You have 2 choices

  1. replace oracle_home installation of oracle database in the variables env control panel system
  or
  1 copy the tnsnames.ora, listener.ora under Developer suite... location/networ/admin.

  If you are using on your local computer, you do not have this and you should be able to connect but if you use it is not bad either.

  Output from the following command post

  lsnrctl status
  

  Concerning