Similar Questions

• __File names are larger than is supported by the file system

  I tried to upgrade from Vista to 7, but the upgrade attempted to restore Vista.  To exit a loop of reboot, I started from the drive of W7 upgrade went to the command prompt and found a folder with subfolders 25.  After moving them to another directory, I was able to get the roll to Vista is complete.  I tried to delete the record with 25 subfolders.  But I get the error message "the folder contains items whose names are too long for the trash.  and "the names of source files are larger than is supported by the file system.  Try to move to a location that has a shorter path name, or try renaming to shorter name (s) before launching the operation".  I tried shift-delete to bypass the Recycle Bin, but it does not work.  I tried moving and able to copy to a different folder after what I was able to remove the old records but could not delete the new folder.  Now, for some reason any I can rename the subfolder name (they were all named "Downloads"), but when I did it it would create several subfolders named "downloads".  So now I have 60-70 subfolders, rather than the original 25.

  Does anyone has a suggestion or a program to help me remove the offending folder?  Should I go on my recovery drive and recover Vista of the D: drive on the C: drive?  If this does not work, will it reformat the hard drive?  If I reformat, how to move to Windows 7?  Thanks for any help.

  HII secoch ,

  Thanks for posting your queries.

  I hope you have this problems, but this forum is to help everyone, I want something here too, I did too and it really helped.

  First thing is you do not need to download all programs for this.

  Like, Windows has problems dealing with extra long path/filenames. If the
  combination of the names of access road and closer to 255 characters (127 for
  Windows 95/98/me) Windows probably not manage it well, if you try to remove or
  Rename it (you can create it, but not change it). The first
  thing is trying to rename some of the files which lead to the queue
  himself. The directory displayed a level of return, and then select Rename the
  folder the file is located in. Try a single letter (of course, to keep a record of what
  folder you called that so you can reverse the process!). Then, return to the
  file and see if Windows then you can rename or remove. Otherwise, go back
  yet another folder and rename this one and so on. At some point, you should be
  be able to find a series of folder names of reduced length which you can then
  Rename the file to a name that is short enough to allow you to recreate then
  the original directory tree and still work with the file in question.  In fact, the main goal is to try to make the shortest path of length instead of only the file name and the folder name.

  I also hope that this help option.  If this isn't the case, please after return or PIN me.

  I am always available on mail too-> * address email is removed from the privacy *.

• Right side of placed images are cut when exporting to PDF

  Hi all

  I am a beginner still trying to wrap my mind about InDesign and all its features and have encountered a problem with export to PDF. On the right, 1-4 pixels are cut off! I think my problem may be related to what has been discussed in this thread:

  InDesign, problem of Image with PDF export... straight cut...

  But my question has nothing to do with Visio. I'm simply put PNG and JPG files that have already been created and stored locally on my computer. I found that the only way to solve this problem is to add a few columns of pixels of space white/empty in my images so that the straight line of frame in the images (created by Adobe Illustrator) appear.

  Having to change my images first before placing them in InDesign is obviously not the best or the right solution.

  Does anyone have any ideas what could cause this problem and how to fix? Maybe there's a setting somewhere for the picture frames that should be adjusted?

  You say that the border is the placed graphic? No, don't do that. Make the image as the image only, apply the border via the framework (and via an object style).

  I don't know why the gross pixel is truncated, could be an error in the workflow or a bug, it should not happen, but you must not include in the file anyway.

  When the files came from Illustrator, use HAVE or PDF/X-4, never no raster such as PNG, BMP or JPG image. If it is printed, text and vector will be printed with the maximum resolution of printers and the quality, raster images cannot be better than the resolution of the image. PNG also supports only RGB and print it not so good, because it would be a CMYK graphic with clear black.

• Cursor images are cut off 20%-80% of the height, has been very good in 34

  On our Web site, we have a slider with about 10 images that have always worked. Now, users who have installed the update of Firefox to 35.01 cannot see the full images. Instead, some images are cut off 20%-80% of the way down on the cursor, while others are intact and completely visible. Image size/type has no effect.

  Everyone knows this?

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• My Windows Live Mail is sorted in alphabetical order by family name, but now, when I add a new contact, it is positioned at the top of the list instead being placed in the right place alphabetical.

  My direct mail is sorted in alphabetical order by family name, but now, when I add a new contact, it is positioned at the top of the list instead being placed in the right place alphabetical.  How to load the list of contacts to organize all contacts, including contacts, in alphabetical order by family name?

  E-mail address is removed from the privacy *.

  My direct mail is sorted in alphabetical order by family name,

  It is not clear what you mean by this statement.

  • There is an option in the contacts window in kind (names) of > name -is that what you mean?
  • Or that, when you open / switch to the contacts window, you see a list sorted by last name?
  • Or that when you click on to... or start typing in the to... box in a message composition window, you see a list ('contact selector') sorted by family name?

  Only in contact with an e-mail address will appear in the "Chooser". The list includes names in alphabetical order. For contacts with a first name and a registered name , the list will be sorted based on the preference granted to sort by in the Contacts window. Contacts with multiple email addresses will appear once for each address with the address in brackets after the name.

  Name is a special value built by WLMail contact data fields. It will consist of the first match found during the analysis of the data fields in the following order:

  1. Nickname
  2. First name + last name (in the order specified to sort by in the Contacts window)
  3. First name or last name
  4. Company
  5. E-mail address
  As you start typing in of... box, WLMail will present a list of matching entries in your contacts list. You can start typing username, first name, first name, company, e-mail address to a contact or any significant word in the Notes field for this contact. So, if you type bil, for example, the list that appears will include
  • any person whose nickname starts with Bil, e.g. Billyboy
  • any person whose first name begins with Bil, e.g. of Bilbo Baggins
  • anyone whose first name begins with Bil, for example Jim Bilko
  • everyone whose company name starts with Bil, e.g. Billingsgate Market
  • everyone with an address of e-mail from bil bil or just after a period or the ' @' symbol, for example "the bilbo at hotmail dot com" or "jim to billingsgate dot com" or "jim.bilko at hotmail dot com.
  • all categories whose name contains a word starting with bil

  If this does not solve your problem, please post your question in the forum dedicated to contacts in Windows Live Mail.

  Noel

• My icon names are now white on a blue background, after 'copy link location' of the web.

  Recently (stupidly) just clicked on an image in ebay & selected copy the location of the link so as not to lose my search.  After you have copied on the desktop there is no URL link, and all the icon names are now in white on a blue background. System Restore does not recognize the changes. Please can someone help? I have Windows XP Home Edition. Thank you.

  Hi Marian,

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. don't icons open programs correct?

  2. you have any antivirus installed on the computer program?

  You can try the steps and check if it helps.

  1 Control Panel / System / Advanced / Performance tab / button settings and tick: shadows fall to use the desktop icon labels.

  Also, try the steps and check.

  01 right-click on my computer

  02. click on properties

  03 come on in the Advanced tab.

  04. in the course of execution, click settings

  05 unchecked all the options here and save it.

  06 right click on desktop

  07. under desk to go to the office to customize.

  08 Advancedtab ' Web tab and make sure you disabled the Lock Desktop items.

  09 right click on my computer

  10. click on properties

  11 go on the Advanced tab.

  12. in the course of execution, click settings

  13 check all the options here and save it.

  14 fact

  Restart the computer and check.

  Hope that information was useful and let us know if you need help with Windows. We will be happy to help you.

• My files, folders and element names are colored which appear in blue, how to change them back to black?

  My files, folders and element names are colored which appear in blue, how to change them back to black?

  The names of files (text) for example appear blue, as if it were a hyper link, where normally they should be black. What can I do to change black?

  In general, folders with names of blue files appear in this way because the compression of files and folders is enabled for this file or folder.  To return only the names of files and folders back to the dark, disable compression of files and folders that show in blue now.  Right-click on the folder, select Properties, and then on the Advanced button and that is the option.

  writing in the new message: * e-mail address is removed from the privacy... *

  My files, folders and element names are colored which appear in blue, how to change them back to black?

  The names of files (text) for example appear blue, as if it were a hyper link, where normally they should be black. What can I do to change black?

• Envy4502: The lines are cut off on high or low or completely missing

  When I try to print, sentences either entirely missing, or they are cut on the top, bottom or both.

  I tried to run diagnostics on the printer, clean the heads, check the alignment and run printing and scanning doctor and went through all the steps on the help page for printing any unresolved problems. I also changed the ink cartridges that did not help either. I used always to HP Print on this printer cartridges.

  Someone else posted exactly the same problem and they were to refer to the help with the steps page which is not this problem anywhere.

  @Rainy_Lake,

  Welcome to the forums today!

  I hope to help you with the problem of partial printing that you are facing your craving 4502, on Windows 8.1. I understand you tried to align the printer, running the PSDr, cleaning of the printheads, etc. anything.

  Then try the hotfix download here: a work of wireless, printing high quality to a WSD port is cancelled automatically on a windows 8.1

  Try to print from a few different programs later and tell me what is happening in each of them. Please also let me know if you can make copies of the unit successfully, or if there are problems with them as well.

  If you like my answer to your concern today, click on the thumb upward below!

  I hope to hear from you, enjoy your day

• Try to copy a folder with subfolders, some don't copy, get the message that the folder names are too long under Windows 7

  Hi, when you try to copy a folder with lots of subfolders, some files don't copy.  I get a message that the folder names are too long, and the only option is to ignore these files.  Anyone know the maximum folder (and also) name length that will copy windows 7?

  Thank you

  Steve M

  Hello
   
   
  a. What are the data you're trying to move?
  b. what operating system (for example Windows files) files?
  c. What is the method that you use to copy data?
   
   
  Windows 7 supports filename up to 260 characters. I would ask you to decrease the characters in the file name and then try to copy the files.
  
  Let us, run disk checking hard disk utility and then check.
  Here's how:
  1. open the computer by clicking the Start button, click computer.
  2. click on the drive you want to check, and then click Properties.
  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.
  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
  4. click on start.
   
   
  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My Music folder name is music only. How is it possible?

  My Music folder name is music only. How can we have this same folder two name.

  If it is possible how can I do it manually to another folder.

  Although C\Username\Music is the right destination,

  Change the default save location,

  http://Windows.Microsoft.com/en-us/Windows7/customize-a-library

  http://www.SevenForums.com/tutorials/595-Library-set-save-folder.html

  Understand the win - 7 library system,
  http://www.howtogeek.com/HOWTO/10283/understanding-the-libraries-feature-in-Windows-7/
  http://msdn.Microsoft.com/en-us/magazine/dd861346.aspx

  Take screenshots,
  Usually, you can press the SHIFT key (maybe the Alt key) or (FN key on your laptop) and press prtscrn.
  Open microsoft Paint, and then click Paste on the top left.
  Painting is located in the Accessories folder in all programs from the Start button.
  Then click on the blue button on the file and click Save as, click jpeg file type and name the file.
  Upload to skydrive or photobucket in a public album and post a direct link to the file here.

  Or use the windows snipping tool,
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots
  Refer to this topic on how to make a public record and present screen shot here.
  http://answers.Microsoft.com/en-us/feedback/forum/suggest/how-to-insert-an-image-into-a-post-at-answers/bdae0306-c3cb-4d31-ace9-7281ea1a8a73

  You can also look at this for the new format in skydrive

  http://sdrv.Ms/RtThbH

• When I'm in split mode, I can't see my pictures.  I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2.  Is there a setting in DreamWeaver I can change to take account of my images to be self

  When I'm in split mode, I can't see my pictures.  I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2.  Is there a setting in DreamWeaver, I can change to take account of my images be seen?  Then I see mode live view but not in the edit view.  I use DreamWeaver CS5

  It's normal when you are in mode split with Code and design, while the external use referenced images. There is no setting to fix it.

  As a work around, I normally keep a copy local images in a file of site when working on an html email, then just before the code for the e-mail service hovers over, I'll do a quick search & replace to add the absolute paths for images server copies.

  Live View mode should show images correctly, but editing is not possible in DWCS6 although later versions now have an editor in Live mode.

• The following names are not found and cannot be added

  Hello

  I get this error "the following names are not found and cannot be added" when I tried to add newly created user for authorization of vCenter/group.

  I am using vCenter 4.1 with the guests of ESXi 4.1 & ESX4.1

  Time is synchronized with the ntp server in DC and vCenter & ESXi hosts.

  Any help to solve the problem?

  The problem caused by the AD domain and vcenter with the same sid, once change vcenter for a different sid, the problem has been resolved!

  How to change the SID on Windows 7 and Windows Server 2008 R2 using sysprep?

  http://www.Brajkovic.info/Windows-Server-2008/Windows-Server-2008-R2/how-to-change-SID-on-Windows-7-and-Windows-Server-2008-R2-using-Sysprep/

  You can download the PSGETSID

  Download tools named "PsGetSID" and make sure that your windows 2008 SID is not even. You can download it at the following ADDRESS:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897417

  Thank you best regards &,.

  BSR Krishna

• 4.0EA1 - connection name can contain only alphanumeric... why?

  I just encountered this error, which is apparently design:

  Connection name can contain only alphanumeric characters, the underscore (_) and hyphen (-).

  I found this post on the forum, but was a little depressed that I never use login names are now disabled... and as I had to change one of them, I need now to change my entire naming system:

  Restriction of SQL Developer 3.2.1 patch connection name

  Exclusion of character list may or may not vary by operating system, and, roughly speaking, will probably contain...

  <:/\|?*()%&'$@^~#"> {code} 

  Can we reconsider a return to how it used to be for 4.0EA2?  I use various constructs to ensure an appropriate message is carried with the connection everywhere it goes:

  
  

  # ATTENTION #-Production
  

  
  

  Now I need to come up with a new naming system... <sigh>

  
  

  Greg.


  Why - I don't know there is anything that we can say that will make you happy here, but change has been to examine a few bugs of low level framework.

  You can keep your old login names. As a solution, just manually change connections with SQL Developer XML file closed.

• Where (drive, folder, file name) are database files that store information to catalog such as tags and changed the dates in the 13 elements?

  
  I want just the datebae file which contains the data of the backup catalog.  I can't find it in the 13 elements but could not in 10 items.  Is it hidden in a secret file with a secret name?  Why?

  The catalog is a file containing the main database (catalog.pse13db), the cache of thumbnails (thumb.5.cache) and other files and subfolders. To save a catalog, you save the entire catalog with its subfolders. Note that if you do not save the thumbnail cache (which is the largest element in the catalog), it will be rebuilt automatically.

  In all versions of elements, Win or Mac, you can find its location on the menu: help/information system.

  By default, it is in a folder hidden in Windows.

  Why? I don't know, but you can tell Windows Explorer to show hidden files. It is up to you; I always do.

  The catalog must always be in the default location? Not at all. You can move it elsewhere. For example, you can maintain your catalogue and your picture library on an external drive. Then, watch as catalog manager being "custom position".

  What follows is not in your question, but I assume you are asking only for backup purposes. If you have an external backup system, you must include the catalog folder. It is not enough if you want to restore to another computer or a drive, because the original is dead. The catalog stores the location of the image files with respect to the path, but also for the internal serial number of the drive. Change drive means that all the files appear 'disappeared' or 'disconnected' and you will have to run a procedure to "reconnect". Reconnection is necessary if you are using the internal backup/restore process in the Organizer.

  Using Backup, Restore to move the catalog | Organizer | Elements 6 or later version

  If you are not in the case of an accident, but you simply want to update (enclosed updated version PES), the integrated system is ideal.

  Other backup systems have their advantages. I use SyncToy Windows after each session of significant change and the backup of the organiser at regular intervals.

• Top half of the clips in .wmv in my project are cut. Wasn't like that before. What continues?

  Hello

  I'm working on a promotional video for a company for a few weeks, but I had to put it on the back burner for a while to help them with their poster for a trade show graphics. I have now returned to video, only to discover that the top half of all the 480 p .wmv clip I used are cut. I use an old video that they have taken a few years on a camera to standard definition and stretching 225% to fit in my composition of 1080 p, as well as some they turned with the new camera avchd video. I only have this problem with the .wmv files. .Avchd files play fine. Things I checked:

  The video is not positioned in the composition of wierdly.

  The video is not covered by a black rectangle, that I don't see. I dragged some avchd on the track files and they appear fine.

  I tried to drag the clip to the file Explorer in the project, but it is still important with the missing half top.

  I tried made my video and half superior is always missing.

  It's really confusing because the video has been change and make very well. Spend two weeks and now I have this stupid problem.

  Any ideas? Thank you.

  Hi Tony,.

  This is a known issue. See the ad at the top of the forum.

  Thank you

  Kevin