LLB

Similar Questions

• Invoke the LLB file vi

  I had a few screws that stored in a. File LLB. Is it possible to call these screws in c#? If so, could someone can share a demo for me code? Thank you!

  Have you tried to build your screws in a .NET interop assembly using the Application Builder rather than a LAW degree?

• More 1997 PCI - CAN, how to put NIDeviceNet.llb screw LV6.1 to LV2012

  Hello

  I've got this old system on Windows 2000. There * a lot * of calls to the screw in the LabVIEW 6.1 DeviceNet.llb, called DNET screws...

  If I've upgraded to LabVIEW 2012 and got a new NI PXI-8532, what it would be like to get the old code to work? Is there a new library / api for LabVIEW for devicenet? Or all the screws in the current library of devicenet LabVIEW have the same names and Connector components as in LabVIEW 6.1?

  (I talked to a very good industrial AE to Com, but why can't I use my Premier Support to speak to one * DeviceNet * specialist at OR?)

  CC

  There is a white paper on the passage of the old code of Dnet1.x to IndCom for Devicenet 2.x code: http://www.ni.com/white-paper/14074/en

  DirkW

• From LABSPHERE llb

  I'm trying to access the features provided by Labsphere llb, but when I try to set up the call to the library, there is no function in the menu dropdown.

  I have no problem with llb that came with other equipment. Is it likely that something specific about how Labsphere creates her law degree or I am doing something wrong more generally?

  Thank you

  EMH

  Do you know what type of DLL the Labsphere library? What is a .NET DLL, 16 bit or 32 bit?

  You may find these articles useful:

  http://digital.NI.com/public.nsf/allkb/92FE51D8037DF0ED8625630000488622?OpenDocument

  http://digital.NI.com/public.nsf/allkb/DCB90714981A1F148625731E00797C33?OpenDocument

  http://digital.NI.com/public.nsf/allkb/44E40ACF1644DB77862562990054D672?OpenDocument

• 9.30 NIDAQ drivers not install LabVIEW 2011 - example. Microsoft .com's in LabVIEW 2010 under vi.llb

  I just upgraded to LabVIEW 2011 without uninstalling LabVIEW 2010.  I downloaded the last set of drivers DAQmx 9.30.  I find that these drivers are installed in a DAQmx folder under the vi.llb of theLabVIEW 2010 and NOT in the vi.llb of LabVIEW 2011.  The DAQmx features do not appear on the menus and the existing instances are reported as 'cannot be compiled. How can I get the DAQmx functions to properly install LabVIEW 2011?

  You must DAQmx 9.4.

  9.4 DAQmx

• Save a LLB VI as autonomous VI

  I received a Bachelor's degree in LAW.

  I only need a VI thereof.

  I can't understand how to do a save as for a VI.

  When you have discovered VI, you should be able to do a save as... then another location outside the LLB after you choose how you want to make the backup.

  It works for me at least.

  The VI will remain as a copy of the original in the LLB little matter how do you save it, so if you want to remove from the LLB after that, you must use management Bachelor of RIGHT to delete the original.

• Helps converting LV 4.0 LLB LV 2012

  Hello

  Please can someone convert this LLB 4.0 LabView LabView 2012? Thank you!!!

  I ordered the kit but will take a few days to get here.

  Fact here: http://forums.ni.com/t5/Version-Conversion/Help-with-converting-LV-4-0-LLB-to-LV-2012/m-p/2985071/hi...

• Still need mass of compilation by default values.llb in BT using TS4.2.1?

  I use 4.2.1 TestStand and LabVIEW 2009. Re-reading (new combination of software OR) "Using LabVIEW and LabWindows/CVI with TestStand I fell on this paragraph.

  Using a LabVIEW 8.6.x or advancement system

  When you install a version of LabVIEW later than LabVIEW 8.6.x and you

  to use this version of LabVIEW with TestStand, you must complete

  the following steps to update TestStand - 86 llb default values

  to enable LabVIEW adapter retrieve the default parameter values

  the screw.

  1. create a copy of TestStand - 86.llb to the default values.

  2. rename the copy TestStand - xx.llb default values, where

  XX is the version of LabVIEW, with a revision number, you

  you want to use with TestStand.

  3 mass compile TestStand - default values using the xx.llb the

  version of LabVIEW, you want to use with TestStand.

  I still do with LabVIEW 2009 and TestStand 4.2.1?

  Hi GovBob,

  You don't need to do it with LabVIEW 2009 and TestStand 4.2.1. If you access this location: C:\Documents and
  All Users\Documents\National Instruments\TestStand
  4.2.1\AdapterSupport\LabVIEW, you will see that there are already documents llb 90.l in default values.

• application builder error.llb

  Hi all

  I use the application builder to compile an executable from my VI. Compilation works without a hitch.

  However, when I try to launch the .exe subvis are missing three of error.llb: not found Dialog.vi, Dialog.vi to view details and the value string Value.vi

  The compiled .exe seems to be looking for these screws in instr.lib, which is not found in the compilation folder.

  This occurs even on my machine for development, on which, of course, the VI works well since in LabView.

  I missed something during the configuration of the compiler?

  Thank you in advance for your help!

  Nico

  I had this before, and it was reported by OR as a bug that just load a project that was built in an old version of LabVIEW and creating an application thereof. For me it was to load a project LV8.5 in 8.6.

  The only solution was to add the three missing from vi to the project and make sure that they are added to the list always included in the application builder.

  You will find these vi NIUninstaller Instruments\LabVIEW 8.x\vi.lib\Utility\error.llb program. Simply add them to your project, somewhere, and then in the application Builder makes sure that select you them as always included in the source files section, and then rebuild your application.

• Could not find ExcelExamples.llb in LV2013

  Hi all!

  I have an old VI I'm opening. Miss me the "LabVIEW" 2013/examples/comm folder and the ExcelExamples.llb file, which should reside.

  My questions are;

  What I need to load a toolkit to get this file, and what tools do I need?

  If this file has come standard in most LV worm?  (I used to have the file but I do not remember a Toolbox of loading)

  Thank you for answering this boring question.

  Rob

  These examples have been removed in LabVIEW 2013 and later versions. Comparable examples are now located here:

  \Examples\Connectivity\Excel [LabVIEW 2013 and following]

  If you can't find what you need in there, I attached the 2012 ExcelExamples.llb in LabVIEW to this answer.

  Also, as a general rule, your code should probably link to things in the folder "examples". Make (renowned) copies that you need here and distribute the copy with your code.

• on the use of LLB, Subvi and project

  Hi all

  I have heaps of subroutines will necessary for all projects of development on the same computer. For a long time, I wrap each of these subprogrammes as a separate Subvi and call the Subvi when necessary. But I just saw that someone will build a LLB in contains all these Subvi. It will be the same to build the LLB or separate from the Subvi? So, what's the advantage of using LLB? I have seen that the builtin functions are all grouped together in a LLB. So if I create my LLB, where should I put this LLB so it will appear in the main palette?

  The second question I have is what is a project concerns in labview 2013? I've been using labview 7 long and I create my project in a folder. But LV2013, I can creae a project and link everything in there. So what's the advantage of using a project?

  Thank you.

  It's really no use for an llb. It was mainly used to store screws with long names - names that were not supported in the early days of the transition from the BACK. Storing files in a Bachelor's degree in labor law is a bit risky because a single corrupt VI will make everything unreadable llb. A Bachelor's degree in law is not appropriate for source code control. Source code control is able to follow the Bachelor of law and not individual files. The only time a law degree should be used must distribute released code. Better and this which is used is now the lvlib or packed library. One of the biggest hassles of older versions of LabVIEW is the inability to load different screw with the same name. Placed in separate vilibs, you can now do.

  The advantage of the project is what you said - all linking together regardless of the actual location of the file. The project may contain files other than screws - word and excel for example files. A project is also required to create an exe file. The project contains the specifications of construction for the exe and Setup. A project can also contain DAQmx tasks. Even if you do not create an exe file, a project is always a useful organizing tool.

• which file in DAQmx replace zadvd.llb?

  I have installed here DAQmx

  but I have a program here that use the zadvd.llb

  and I know that this law comes from the Tradicional DAQ

  I want to know if have a few new llb replace that one with DAQMX?

  Thank you

  This article provides information about the transition from the traditional DAQ to DAQmx:

  Transition of NOR-DAQ traditional to NOR-DAQmx in LabVIEW

• Open Server LLB VI

  Is there a way to open a LAW degree, in LLB Manager, programmatically using VI Server?

  Opening a VI library, project, etc. all can be done relatively easily by using VI server but I do not see a method for opening a LAW degree.  Research into the LLB Manager in the \project\llbedit.llb\LLBMgr to Interface.vi I see that I can provide the path to a Bachelor's degree in LAW on control of path (not on the side of the connector) and run the VI and it will work, but using this method has a problem when you try to open a second Bachelor's degree in LAW , because this VI is not reentrant, and it will not open a second window.

  A method that works is in command line with the full path to the LabVIEW.exe and the path being the first argument LLB.  The problem with this method, is that still does not work with several versions of open LabVIEW.  It is often open in the wrong version.  But using VI Server I can specify the port to open an instance of the application on and make sure that the version I want open, is the version

  Well, this can greatly simplify things, through Server VI methods I found an open > LabVIEW Document which seems to do exactly what I want, all supported types of LabVIEW files.

• Another error 1502 [loadnilvce.vi] 2015-64bits (building .llb)

  I have submitted a ticket in NC, but shaped post here is maybe not a bad idea as well. I'm not very confident there is real for that matter difficulty since the research I've done a number of positions with similar issues with no definitive answer. I have tried everything I can find on the basis of knowledge NOR with none of this works. [http://digital.ni.com/public.nsf/allkb/8683D4C66F5CA50E86257341007CF34D]

  It is important to mention that I am building a library (.llb) and not an executable (.exe). Enabling debugging on my build so does not apply.

  Section above, the part that stood out, for me, most was the part on the fact that the code will never be executed.

  So I was able to prove that the problem is with a missing dll pertaining to the structure of loop timed being used in the code.

  I replaced it with a while loop with a 'wait for multiple next' vi and project now compiles in a .llb with no problems.

• full form of llb in labview

  Hello

  can someone tell me what is the full form of the LLB in labview

  thanx

  Billy.

  It's LabVIEW VI LiBrary

• "Make sure that all dependencies of VI (including screws vi.lib) are located in the same LLB as the VI you specified.

  I use VBAI 2011 and LV2010.

  I design a VI using LV and use it for my VBAI app: VBAI will transmit the data to the VI by updating the user interface of inspection.

  Throughout it works fine until I have add a 'linear curve fit' in the VI - and the error message as above begins to appear.

  How can I solve this problem?

  I have no problem, once I followed all the instructions. You will not see the dependencies listed in the App generator, but after completing your Bachelor's degree in construction LAW, they will be in the LLB. I have attached the generated llb and the project with all the settings I used so you can see what it should look like. When I tried to use the file generated in VBAI, it loaded correctly. If you need to make changes, don't forget to make changes to your original VI then rebuild using the project and use the built LLB in VBAI, do not change the LLB directly in LV (you can accidentally add a VI from the palette and this will mess up the LLB because not all dependencies will be more in the LLB).

  Hope this helps,

  Brad