LNS still to try to use the same old port

Similar Questions

• Try to use the same pattern for more than two channels (CSR configuration) with usb 6000

  Hello

  I am currently trying to implement a LabView code to get readings of voltage using 5 different places at the same time. I want to only use the first location in the ground and get 4 measurements of voltage between the ground and each of the other 4 channels. I use a USB 6000 which, for now, allows me to use the same pattern for only two channels. Is it possible to use the same pattern for 4 channels?

  Thank you

  Maria

  The images do not explain everything. You must explain what are the sensors. I think you totally wrong on how they should be linked. CSR, all sensors must be a common understanding and the outputs not individual channels as I have already explained. If you are unable to do this, you should probably not use CSR and you have the wrong data acquisition device. If you want a side of a sensor as a reference, you need differential connections.

• Pair several devices on the same COM Port that use the stack for windows by toshiba bluetooth?

  I have several instances of the same device...

  I wish that they all use the same COM Port when connecting to my Toughbook.
  The application that will receive data from these devices will only monitor a single COM Port assigned to.

  I have only one active connection both for couples... That's why Ifeel, this should be possible.

  Any help would be greatly appreciated

  Thank you

  Hello

  Please contact the Microsoft Community Forums. I understand you want to pair multiple devices on the same COM Port using Bluetooth.

  Unfortunately, it is impossible to pair multiple devices on the same COM Port using Bluetooth as it is by design.

  With the help of Windows-related issues feel free to post on the Forums of community of Microsoft, we will be happy to help you.

  Thank you.

• If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  Yes, you should be able to reinstall, but if you can you should disable before resetting the machine.  Otherwise, if the two license activations were used and no reset you will need to contact Adobe Support by chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  It's a delicate issue... like some patches cannot stipulate pitchbend...

  But to quickly test your pitchbend wheel actually works properly...

  Download the free lunch monitor...

  Snoize: MIDI Monitor

  Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to use the clone stamp. a red part appears and the message saying it is a mistake and close photoshop, reopening the same case, no problem there is little time

  When you try to use the Clone Stamp tool, the screen becomes a partial red screen and a message from Windows saying that an error has occurred and close Photoshop.

  The same thing happens again after the reboot, ALL work is lost, this has happened only recently

  Hi all, thanks for your help, I went into preferences and disabled tick graphic, now everything is OK thanks Ben so

• I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.

  I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.  I use it often and would appreciate any help to recover!

  Please download and install Photoshop CS6 from the following link: download Creative Suite 6 applications

• still no luck with highlighting and try to use the Edit with photoshop elements Editor

  still no luck with highlighting and try to use the Edit with photoshop elements Editor.

  Yes, I clicked the change of use with photoshop elements, editor in Chief but still, don't put not to...

  region and I select view selected in organzier files. I don't understand what is happening. I never had this problem before and I have 12 for a long time.  How can I fix it?

  
  

  You can keep answers to the original discussion, or it's going to go very confusing - http://forums.adobe.com/thread/1438997?tstart=0.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• If I uninstall Windows 7 and then reinstall it on the same computer, using the same key/copy register?

  Need a quick answer here! I'm selling my older HP laptop that has Windows 7 above. I intend to uninstall the operating system, and then reinstall it to wipe all my data. The copy is just a simple upgrade from Home Premium (the laptop came with Vista). When I reinstall, can I still register by using the same key? I have heard that it is installed on a computer at any time then you can, but I'm not completely sure.

  Enable is the right term, Yes. Now what happens if I simply select "Custom" when I try to install the upgrade of Windows 7 since I don't have a Vista disk?

  If your Windows 7 is an upgrade license any system move to must have a previous operating system eligible before you can use it elsewhere. You may also need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• "unknown error has occurred" when you try to use the Photo merge into LR CC

  With the help of LR CC on OS X 10.10.4.   Whenever I try to use the command 'Merge Photo' for panorama or HDR, I get an error message saying "unknown error occurred".  If I take the images in PS as TIFF, then merge with one pano or HDR works fine, but I want to use LR to keep the dng files.  I raised this question in a chat session with Adobe on May 22, when I was told it would be fixed in the next version of LR CC - next release didn't solve the problem, I still get the same error (case #0186669986).  Question raised again in another session of chat with Adobe rep July 16 - as requested, I have downloaded a game of my images that is generating the error, but have had no response (case #0186848023).  Got no response from Adobe on this question, how it solved? --are there patches there?

  Thank you

  John Eaton

  Please update the latest Lightroom update, which is 2015.5.1

  Lightroom CC now available 2015.5.1

  Also, do us if this is useful when you run the action.

  Kind regards

  Mohit

• using the same search terms on ebay, getting different results on firefox exploer

  using the same words to search on ebay for internet explorer, I get results more when I use ebay on FireFox > is cutting some of the results when using Firefox

  It is always possible that eBay is to differentiate between browsers and gives different results, based on previous visits.
  You can try to delete cookies in two browsers to see if it has an impact.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• Firefox does not open, and when I try to use the "run", it says that the file has been moved, etc. I use Windows 8 and I can't lose my favorites. Help?

  Firefox has been great to work on my computer for months and then suddenly he could not load pages. So, naturally, I restarted my computer, but when it restarted Firefox does not open. The icon lights for a bit as usual, then it fades and never actually opens. When I try to use the "run" command, I get this error:
  "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »
  I also tried the same thing for the file in the x 86 folder, but it gave the same error and I went and looked for the files in the given location and they were there.
  Firefox is not to fall down, so he isn't there an other error message, I can give you.
  The things that I had my favorites are really important, I can not lose those, but I am fine with anything else have to re-installed, etc..
  Help please?

  I've never tried it myself, but the forum has a series of measures for a "clean reinstall" Firefox. Even if you do not delete the record of your personal settings (AKA profile) during this process, a backup of this folder is always a good idea in case something goes wrong.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Why the temperature shows on my watch always different temperature on the watch of my husband when they use the same application?

  Why the temperature still showing on my watch shows a different temperature than on my husband watch when they both use the same weather app?

  Hi Jodie

  If you are each using the weather app (which is included in the framework of the iOS and watchOS), the following steps can help (followed by each of you):

  • On your iPhone, in the weather app:
    • If using anything other than the current location (which is included by default), make sure you have each added to a common location / city.
    • To add another location, select the icon «+»
  • On your iPhone, in the application of the watch, go to: My Watch (tab) > weather > default City > make sure you have each selected at the same location (for example: place of current residence or Mount Laurel).
  • On your iPhone, go to: settings > privacy > location Services:
    • Ensure that the location service is enabled;
    • Make sure Apple Watch is face value while it helps;
    • Check that the weather is set to always;
  • On your iPhone, go to: settings > general > background App update:
    • Check that the bottom App Refresh is enabled.
    • It can also help to activate the setting for the weather.
  • For optimal performance of your watch, keep the Bluetooth and Wi - Fi enabled at all times on your iPhone:
    • iPhone: settings > Bluetooth - on.
    • iPhone: settings > Wi - Fi - on.