Load before the preloader!

Similar Questions

• Loading before the images (preloader question) images

  I have a .swf which is 83%, images and weighs about 4 MB.

  This large size, I decided I'd do a preloader, however, framework of the preloader will load only after images and other resources are loaded.

  Basically, the preloader will appear after 83% of the .swf is loaded, who leaves the white screen for a moment and then only display the preloader.

  In even simpler terms, I want to set the priority of loading something (a resource? a scene? a frame?), or only a single image to load, then let that govern loading the rest.

  Please report if you did not understand what I mean.

  Yet once, for each symbol (in your library) related to export, uncheck the export in frame 1.  then test.

• Unwanted Web site still load before the home page

  Whenever I open Firefox, or a new tab, another Web site load before loading the page you want. It was a legitimate website, not malware, spam or something like that.

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Does not load before the Welcome screen

  I get to the sign in screen on vista and I put my password and sign in however it will not load past the loading screen.

  Hello

  What would you say if try you it in safe mode? It will allow you to open a session?

  To access safe mode, press F8 just after the screen logo POST or original system manufacturer and before Windows starts to load. This should give you a boot menu where you can select.

  If you are able to log on successfully in safe mode, you can start the troubleshooting steps described here:http://support.microsoft.com/kb/929135

  If you are not able to connect to any account in safe mode, including the default administrator, please post back with some information about how and when this problem started.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Premiere Pro does not load before the splash screen and the PC unresponsive during loading.

  Hello

  Specifications of the PC:

  NVIDIA GTX 750 Ti

  Processor with Six cores AMD FX-6300

  8.1 Windows Pro 64-bit

  My CC Pro first used to work perfectly fine, until recently.

  I use this program called nvidia Shadoplay to record my office, but on Saturday, January 16th, I noticed that it wasn't working for some strange reason. I tried to load the GeForce experience, which is a bit like a control panel for nvidia graphics cards, but I kept getting a weird error whenever I tried to open it. He said that I had no GeForce installed, so I uninstalled and reinstalled, and I had it working again.

  After that I got this problem resolved, I tried to start Premiere Pro. As soon as I tried to run the program, my entire computer became unresponsive. If I tried to click on something else, it would take up to 1 minute for my computer save the click. The screen Splash Pro first jump upward, but it loads through all the dll and prm files much slower. When it happened first, I tried Ctrl Alt Del my way out of it, but my computer would take 5 minutes to sign up the Task Manager. When I try to end the task, nothing would happen. The only way out he had to manually restart my computer by pressing the power button.

  I tried to look for solutions. I tried to move some files Premiere Pro took longer to load on the desktop, like the ExporterQuickTimeHost, EA SequenceRenderer and ExporterAVI files, but loading still takes a lot of time and my computer no longer met. Then I let it load completely, and it took about 30 minutes before I got and error like this:

  The application failed to initialize properly (0xc000001d)

  
  

  I don't remember the exact error. Then I upgraded my Premiere Pro CC 2014 to 2015 version and I had similar problems. Premiere Pro would always take forever to load, but my PC was a bit more responsive.

  I tried to run Avast and MalwareBytes, but they do not have the virus collection.
  

  
  

  I'd appreciate any help as I could about the problem, so I could get back to the Assembly as soon as possible.

  Hi Lecor,

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Satellite M40 does not load before the BIOS screen

  When I turn on my Satellite M40 unfortunately it does not happened on 7/8ths blue bar going across the screen.

  That left me completely baffled as what to do.

  Apparently, it could be repaired by removing the cables on my CMOS battery?

  If someone knows how I would go all this? or have any other ideas?

  Thank you xx

  Hi Dec,

  Blue scroll bars indicate that the Wondiows operating system is loaded from the hard drive. If this process hangs while loading, then it is likely that the hard drive itself is defetive or else the files that are being loaded are corrupt and cannot be loaded.

  Interfere with the CMOS chip will not fix this problem because the BIOS has already been loaded at this point.

  If you have access to a bootable CD/DVD (such as Norton Disk Doctor) then I siggest you boot from it and running a scan of your hard drive. Alternatively you can try reinstalling your operating system of the Toshiba recovery CD but it won't replace your own data on your hard drive.

  concerning

• GRUB loading before the MBR and causing issues

  Hello

  I've erased the initial installation of Windows XP on my Thinkpad X60s and replaced it with Ubuntu just now.

  To do this, I installed GRUB before installing Ubuntu Linux.

  I must have screwed up of installation in the past, but ever since Ubuntu perfect.

  However, now I want to return to my original installation of Windows XP from the ThinkVantage option.

  But - when I try to do, GRUB appears before the MBR and generates an error and won't let me go further ahead. I tried to reinstall with an external CD, but this does not work as well.

  Can someone help me with this problem? I need the MBR to appear before GRUB and continue my installation of XP.

  I can't send the details of my menu.lst if that helps.

  Also, on a different note, Lenovo will cover my warranty (3 years extended) if I have another OS installed?

  Thanks to all in advance.

  Hello, welcome to the forums

  use an xp installation CD and enter the recovery console

  Select the windows partition and use the command "fixmbr".

  who should remove grub

  did you try wubi for ubuntu? who settles on partitions windows as a program rather than a system dual boot... It's a foolproof method for try you it

• computer does not load before the windows loading screen.

  Hi basically I was watching a movie on my windows XP computer and it is essentially closed without warning.
  I tried to restart, but it wouldn't restart after loading with the blue bar screen.

  I tried to load in safe mode and it wont. I tried all the safe mode options you.
  I tried the last good config network still does not start.

  I also tried debug mode
  its not working do not and I really need all my things that are on the computer.
  I don't have a windows disc I bought this second hand about a year ago so any help would be thank you very much.
  Thanks in advance
  also, if anyone knows a way to fix this without an email from disk or reformatting windows me plz

  Jellybabyboosh,
  You should check with the manufacturer of PC for the recovery disc's different installation options.  You may be able to proceed to a repair facility and not lose anything. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A Plugin to load before the addition of MediaFactoryItem

  Hello

  When I try to load my plugin before adding a MediaFactoryItem at the MediaFactory, it won't work (the plugin does not load). However, when loading a plugin after there is at least one article in the MediaFactory, the plugin works fine. What is an element of intent?

  Don't know yet, but we plan to re - estimate a model of plugin in general (including easy to use for the plug-in, document, etc.) in the next 3 Sprints.  Each sprint is about a little over a month.  If you have a specific user for yourself or for your clients, it makes your case more convincing push in. Also if you have a specific timeline that you want to see, please add your comment to FM - 999.

  Ryan

• My computer does not load before the login screen, even in safe mode

  I log on to my account (admin) by entering my password.  Then when I click on login I get the 'Welcome' screen and the circle that just guard spinning.  Nothing ever changes.  This happens both in Mode without failure.  I can sign in the guest account, but every time I try to do anything that requires admin login it freezes again.  Help?

  Hello

  in safe mode does not allow you whatever it is read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• WebWorks extensions always loaded before onload?

  In my WebWorks app, I have a JavaScript extension.  The extension is loaded before the HTML onload event.  In other words, the extension is ready for use before onload occurs.

  Is this always the case?  Can I rely on this behavior?  I can't find this type of information in all the docs.

  When a page is loaded in a WebWorks app browser rendering engine it will check the origin of the page.  Then, it checks the config.xml file information to check which API codes must be loaded in the context of the page JavaScript.

  It will then load each of the sides to this origin in the JavaScript API engine.

  This will happen every first of all JavaScript runs in the page, including the onload.  The extensions are still loaded before executing any JavaScript in an inline script tag that occurs before the onload.

  We must ensure that the JavaScript extensions are always loaded before all JavaScript running in the page.  If your assumption is safe

• Saving a file of the APEX help before the process of Header error

  Hello
  
  I am current trying to simply allow the user to download and save a text file after pressing a button on a page of the APEX. Links to a new page which does nothing except button perform a process before header containing the following pl/sql code:
  

  begin
  
  -- Set the MIME type
  owa_util.mime_header( 'text/plain', FALSE );
  
  -- Set the name of the file
  htp.p('Content-Disposition: attachment; filename="alphafile.txt"');
  
  -- Close the HTTP Header
  owa_util.http_header_close;
  
  htp.prn('Hello World');
  
  htmldb_application.g_unrecoverable_error := true; 
  
  end;

  When I then press the button to access this page, I get a blank page which shows:
  
  Content-type: text/plain; Charset = UTF-8 Content-Disposition: attachment; filename = "alphafile.txt" Hello World
  
  Any help is greatly appreciated.
  
  Kind regards
  
  Alex

  Hello

  I think you should do application process state for example PRINT_FILE, and then the url button

  f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:PRINT_FILE
  

  For this application process "on the load before the heading" need you from your code

  Or try htp.init place start your code

  Hope that helps

  BR, Jari

  Published by: jarola on January 12, 2010 21:40

• "before the header" process and page elements

  I want a process running in 'On Load before the header' page X see an element value them was introduced to her page Y.
  How this can be done?

  The element on page X will have its value before executing the process "before head". You can see if your page in "debug" mode.i

  CITY

• the terrible scene changes and the Preloader

  
  I put a lot of blood, sweat, and tears in the construction of this site and the simple elements are initially most bad.
  
  Scene changes (used to), I found early on that if I moved the longest scene at the end, it did not conflict with the other menu buttons. She appears as randomly, or when the movie is slow to load, the buttons go to the bad scene and begin to play random frames and buttons will not react.
  
  Preloader works (on stage), when I move the eact same code to another scene and just change bodies and information from the scene, I get only a blank screen when the movie loads, and then to top it off, it will redirect to another scene in an odd field. I tried a number of different codes to operate the preloader, all of the standard "remain on this picture until the load rest and then play" codes.
  
  I think that these two problems are related, and I was looking for information on ROOT and OVERALL because I don't really understand them. You can see some of my flash to www.danieljkessler.com site I think that the problem is not the way I'm coding, but I'm missing something which is in conflict with the scene changes. Still, navigation appears to work correctly in the file real film, but when his online or viewed, it has these unpleasant problems.
  
  I am willing to pay a small fee for fixed or I will correct myself if anyone can enlighten me as to what causes these problems.

  I discovered that you can not put a preloader on each stage, only once. So that was the problem. Took me a long time to understand the preloader script to load only partially, so I'll post here incase someone else has the same problems. Also, this person, you want to create multiple swf files and load them in the file of the external location. This way, you can have a preloader for each scene. A note is to try to avoid the scene changes and work within a timeline and also scenes to load up and down unless you change the publishing setting, so if you load your film only partially and can find some buttons for posting a link to the site immediately, rearranging the scene download order by dragging the scenes in the scene in the order window can help fix this problem.

  Second, the problems with the scene buttons works not when the file was loading is because they establish between scenes that have not yet loaded. The preloader can solve this problem. Using the name of frame instead of the scene and the number setting usually works but I think that flash like consistency. If I use the same key in the case of difference, I had to use the same format for the onRelease to work.

  I have to say, the flash is powerful but its also a huge pain in the *. Don't be fooled, CS3 is not all powerful. I can't emphasize enough easily hard things were to do and hard things easy to do. Flash design is nice, but a flash script is real witchcraft.

  Thanks for all your answers quick and useful kglad, especially during the holidays. My site is available at www.danieljkessler.com, I must still do version Chinese, but I intend using the same file and change and redo some of the buttons with the English. God help me.

• before and after the preloader...

  Hello!

  so I have this preloader... but when it ends, before it lights up and plays the scene 2, I want to play an animation. Of course, if I put the animation in my timeline preloader, it will play DURING the loading, which is not what I want. Basically, I'm looking to create an animation IN and OUT. What and where should I integrate that?

  Here is my code for the preloader:

  var amountLoaded:Number = _root.getBytesLoaded()/_root.getBytesTotal ();
  Preloader = amountLoaded * 200;
  _root.loadText.text = Math.round(amountLoaded*100) + '% ';
  _root.loadText2 = Math.round(amountLoaded*100);
  _root.progressMc.gotoAndStop (loadText2);

  {if (_root.getBytesLoaded () == {_root.getBytesTotal ())}
  gotoAndPlay ("scene 2", 1);
  }

  else {}
  gotoAndPlay (1);
  }

  Thank you

  This seems good.  don't forget to label the plot of 'animOut' and 'scene2_frame1 '.