Load into two computers

Similar Questions

• If AI CS3 can be loaded on two computers?

  I am currently using AI CS3 in my office at home in the design of the images.  I have to download the images to an external hard drive, take down to my laser workstation and download pictures on my other pc, then open them with inkscape to send it to my laser to cut out.  My question... I can be loaded on two computers?  I know that WHEN I bought it said one computer only, but it's not as if I had a company where several designers will use.

  Thanks for your help!

  Joe

  As long as they are not in simultaneous use, then you have loaded on two computers.

• Warning: you are connected to two computers.

  I was working in my account to windows live hotmail and when I tried to open an email (at least, I think that's what I was doing at the time).  I got a pop up message that says I was logged into two computers and my email was not available and I have to refresh the page, I did.

  My question is: this message really means that someone else somewhere else was connected to my email?

  Hotmail forums:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  They will help you when repost you your question in the Forums above for Hotmail.

  See you soon.

  Mick Murphy - Microsoft partner

• CS5 and CS6 load on multiple computers at the same time.

  Is it normal to have loaded on two computers and CS6 CS5 loaded on two other computers or that would violate the agreement with Adobe?

  It is normal to have both CS5 and CS6 running simultaneously on 2 computers with no problems.

• I have Photoshop CS6 extended that I bought as a student in 2012. It comes with a disc for loading. I loaded it on two computers. One of my computers is gone belly up so I had to buy a new computer with Windows 10. How can I reload the program?

  I bought photoshop CS6 extended as a student in 2012. I loaded it on two computers. A computer went belly up last week and I bought a new computer with Windows 10 on it. How to load the program on my new computer. I have the DVD disc. How can I got to talk to someone at Adobe? Don't they have any live support?

  Hi wayneharder,

  Use of the download link for Photoshop CS6 Extended below.

  Download Adobe Creative Suite 6 applications

  Once the application is downloaded and ready to install it, need you the serial number to activate it.

  If you already have a copy of one of them, then it's fine, otherwise check out the link below to find your serial number registered.

  Find the serial number of your Adobe product quickly

  Kind regards

  Mohit

• My computer crashed and I get a new.  I already have more adobe on two computers, but one crashed. Is this ok to load it back to the top

  I already have more adobe on two computers, but one crashed. Is it OK to load up again?

  You need to get your refreshed activations if the machine you lost was not disabled Adobe software.  Contact support by chat and ask them to reset the activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• I can't load photoshop CS6 on two computers?

  Can I load Photoshop CS6 on two computers?

  Yes, your license entitles you to two facilities simultaneous, activations.  with the ps, two computers must be pc or mac

• Trying to file share two computers that are running Windows XP, but every time I go into the network working group, that it says access denied.

  original title: HELP!

  Trying to file share two computers runing xp but whenever I go to enter the network working group, that it says access denied

  http://helpdeskgeek.com/Networking/connect-two-computers/

• SQL Loader loading data into two Tables using a single CSV file

  Dear all,

  I have a requirement where in I need to load the data into 2 tables using a simple csv file.

  So I wrote the following control file. But it loads only the first table and also there nothing in the debug log file.

  Please suggest how to achieve this.

  Examples of data

  Source_system_code,Record_type,Source_System_Vendor_number,$vendor_name,Vendor_site_code,Address_line1,Address_line2,Address_line3

  Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

  Control file script

  ================

  OPTIONS (errors = 0, skip = 1)
  load data
  replace
  in the table1 table:
  fields ended by ',' optionally surrounded "" "
  (
  Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"
  Record_type tank "ltrim (rtrim (:Record_type)),"
  Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"
  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
  )
  in the Table2 table
  1 = 1
  fields ended by ',' optionally surrounded "" "
  (
  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
  Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"
  Address_line1 tank "ltrim (rtrim (:Address_line1)),"
  Address_line2 tank "ltrim (rtrim (:Address_line2)),"
  Address_line3 tank "ltrim (rtrim (:Address_line3)).
  )

  the problem here is loading into a table, only the first. (Table 1)

  Please guide me.

  Thank you

  Kumar

  When you do not provide a starting position for the first field in table2, it starts with the following after a last referenced in table1 field, then it starts with vendor_site_code, instead of $vendor_name.  So what you need to do instead, is specify position (1) to the first field in table2 and use the fields to fill.  In addition, he dislikes when 1 = 1, and he didn't need anyway.  See the example including the corrected below control file.

  Scott@orcl12c > test.dat TYPE of HOST

  Source_system_code, Record_type, Source_System_Vendor_number, $vendor_name, Vendor_site_code, Address_line1, Address_line2, Address_line3

  Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

  Scott@orcl12c > test.ctl TYPE of HOST

  OPTIONS (errors = 0, skip = 1)

  load data

  replace

  in the table1 table:

  fields ended by ',' optionally surrounded "" "

  (

  Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"

  Record_type tank "ltrim (rtrim (:Record_type)),"

  Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"

  $vendor_name tank "ltrim (rtrim (:Vendor_name)).

  )

  in the Table2 table

  fields ended by ',' optionally surrounded "" "

  (

  source_system_code FILL (1) POSITION.

  record_type FILLING,

  source_system_vendor_number FILLING,

  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"

  Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"

  Address_line1 tank "ltrim (rtrim (:Address_line1)),"

  Address_line2 tank "ltrim (rtrim (:Address_line2)),"

  Address_line3 tank "ltrim (rtrim (:Address_line3)).

  )

  Scott@orcl12c > CREATE TABLE table1:

  2 (Source_system_code VARCHAR2 (13),)

  3 Record_type VARCHAR2 (11),

  4 Source_System_Vendor_number VARCHAR2 (27),

  5 $vendor_name VARCHAR2 (11))

  6.

  Table created.

  Scott@orcl12c > CREATE TABLE table2

  2 ($vendor_name VARCHAR2 (11),)

  3 Vendor_site_code VARCHAR2 (16).

  4 Address_line1 VARCHAR2 (13),

  5 Address_line2 VARCHAR2 (13),

  Address_line3 6 VARCHAR2 (13))

  7.

  Table created.

  Scott@orcl12c > HOST SQLLDR scott/tiger CONTROL = test.ctl DATA = test.dat LOG = test.log

  SQL * Loader: release 12.1.0.1.0 - Production on Thu Mar 26 01:43:30 2015

  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.

  Path used: classics

  Commit the point reached - the number of logical records 1

  TABLE1 table:

  1 row loaded successfully.

  Table TABLE2:

  1 row loaded successfully.

  Check the log file:

  test.log

  For more information on the charge.

  Scott@orcl12c > SELECT * FROM table1

  2.

  RECORD_TYPE SOURCE_SYSTEM_VENDOR_NUMBER $VENDOR_NAME SOURCE_SYSTEM

  ------------- ----------- --------------------------- -----------

  Victor Ven001 new Vinay

  1 selected line.

  Scott@orcl12c > SELECT * FROM table2

  2.

  $VENDOR_NAME VENDOR_SITE_CODE ADDRESS_LINE1 ADDRESS_LINE2 ADDRESS_LINE3

  ----------- ---------------- ------------- ------------- -------------

  Vinay Vin001 abc def xyz

  1 selected line.

  Scott@orcl12c >

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Problem network two computers together

  Home network with two computers, both running XP Home edition.  The two computers connected (wired) to a single router.  An external network, also on the network drive.  In the past, everything works perfectly.  Computers have been able to share files.  Computer could print via printers shared on computer B.

  Current condition.  Computer A cannot access the file or print sharing on computer B.  Computer B can access A computer as always.  Computer cannot ping computer B, but B can ping A.  Both computers have no problem asccessing the network drive.  Both computers have the same workgroup name.  I tried to run the wizzard of configuration network several times, making sure that the workgroup name is set correctly, but without success.  The message I get is: "workgroup is not accessible.  You can not have the permissions to use this network resource.  Admin contact...  Network not found path.

  The problem may have started after an update of McAfee antivirus software.  I tried to disable Firewall (McAfee and windows) on computer A and even uninstalled McAfee, but still can not computer A to do B.

  Of course, any help on where to find would be appreciated.

  Home network with two computers, both running XP Home edition.  The two computers connected (wired) to a single router.  An external network, also on the network drive.  In the past, everything works perfectly.  Computers have been able to share files.  Computer could print via printers shared on computer B.

  Current condition.  Computer A cannot access the file or print sharing on computer B.  Computer B can access A computer as always.  Computer cannot ping computer B, but B can ping A.  Both computers have no problem asccessing the network drive.  Both computers have the same workgroup name.  I tried to run the wizzard of configuration network several times, making sure that the workgroup name is set correctly, but without success.  The message I get is: "workgroup is not accessible.  You can not have the permissions to use this network resource.  Admin contact...  Network not found path.

  The problem may have started after an update of McAfee antivirus software.  I tried to disable Firewall (McAfee and windows) on computer A and even uninstalled McAfee, but still can not computer A to do B.

  Of course, any help on where to find would be appreciated.

  Have you used the Tool McAfee Consumer Product Removal?  If this is not the case, do.

  Both computers have at least one account with the same name and password?

  A very old (but XP has been around for a long time) message by Malke MVP MS:

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista: set up Windows for the connection automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Cannot install two computers and the F4580

  I had a F4580 without the installation disk.    So far, I failed to install it on two computers.

  1. I tried to install the driver version on a Dell XP 4150 14.1.0.   I follow all the steps of the statement, I do not connect the USB cable too soon.
  I do not use a hub, the USB cable and the plug are ok with other devices.
  There is no other printers.   Usbmon.dll is in the registry.
  I've uninstalled and reinstalled the driver once.   I also tried HPPSdr.exe.

  Nothing helps.   The system does not find the printer over USB.

  2. else I need a previous version of the driver software.   In another thread someone said, he did install under windows 2000.    Nobody knows, what version supports windows 2000 and maybe a link where I can download it?   If I knew the number of the version, I can buy an old installation somewhere disc.

  Yes they care but I really like to help all the way to the end.  In this case, you are right because they accumulate previous drivers to work with those current and according to the date that the printer has been released may also determine how long they hold on the compatibility of this driver with older operating systems.  In addition, after 5 years, some things on the website simply into disuse.

  This is a Deskjet 990 c driver for Windows 2000.  This is a Deskjet 6980 driver for Windows 2000.  You can download both at least one of them should work.  Let me know if that helps you at all!

• Two computers stops randomly

  The two computers are the same, so I'll explain about one of them. The computer stops himself suddenly without any particular reason. Any program is running. However, I noticed than that, he the more when you use a video as Pro Show gold or MoviePlus. Especially during the creation of the ISO file to burn a DVD. However, both companies have told me that I can have a driver of outdated virus or Malware. All pilots are underway according to update the driver software. Here is were the real problem comes. I have run the BitDefender, Windows Defender, and Microsoft Security Essential software and perform a complete full analysis. About 20 to 30 minutes in the analysis the computer shuts down. Every time that the computer shuts down, when I restart it I get the message that the computer turns off properly. Usually, I get a choice if I want to start in safe mode or normally. If I chose normally, it will begin loading windows, and then stop. When I restart, it now gives me a choice of running Startup Repair, I take. When startup repair is running and reloading of files, the computer stops again. So, I start again and on two or three times then it will come with the window asking if I want to restore my computer. I select Yes, and then it goes from there and get my computer going again. I don't know what the problem is and I can't do a top virus check. I chose in the scan where to check and the problem is in the directory window. But I'm just tired of going through all these reboots. I save all my data, that is stored on another hard drive. I want to wipe my hard drive and reinstall windows again, but I find all my drivers and my other software. But the other day I run the Windows Security Essentials on this different hard disk and guess what? It is also shut down my computer. So, all what I have on my main drive I also have on my backup drive. Help!

  Additional information: Windows 7 Professional Version 6.1.7601 Service Pack 1 build 7601

  64 bit ADM Athlon 64 x 2 Dual Core Processor 5000 +, 2600 Mhz, 2 carrots, 2 logical processors

  BIOS American Megatrends Inc. 1401, 1/9/2009RAM 8.0 GB, 7.75 GB available physical memory 5.95 GB total physical memory.

  650 GB hard drive

  Hello

  My apologies for the delay in response.

  You can disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc.) except the keyboard and mouse, and then check if the computer restarts.

  Exchange your RAM modules. Have a RAM attached to the computer and check if the computer restarts. This test will help us find if there is a faulty RAM.

  Keep us informed on the status of the issue.

• File sharing works is not between two computers Windows 7 Home Premium on a work network.

  Desktop computer is connected to a hub that is connected to a wireless router.

  Laptop connects via the wireless router.

  Both computers are in the same workgroup.

  Two computers indicate that they are in the same network of 'work '.

  The two computers 'see' each other.

  Both computers have the same advanced sharing settings:

  • Turn on network discovery
  • Open file and printer sharing
  • Turn on public folder sharing
  • Streaming media is off
  • Use 128-bit encryption
  • Turn on password protected sharing
  • Homegroup connection is not used, but is set to 'use user accounts and passwords'.

  As I try to get the laptop to connect to a share on the desktop computer, the user accounts and passwords on the desktop include the user account and the password for the laptop. This is an administrator account.

  There are actions on the desktop computer and these actions include the credentials of the user of the laptop computer with read/write access.

  Or machines is now faced with my right. I know one of them use AVG Free, but I'm not sure what the other computer uses for antivirus.

  I get the error message has to do with the user account that I use is not eligible not by office machine. I'll post the exact message when I am in front of the computers within a few hours.

  Sharing files between the two had worked, but then stopped. When you first install file sharing, that I had run into a different problem on the desktop where all settings indicated should be shared, but clicking on through a screen I got a message that file and print sharing has been disabled and I want to turn it on? (even while fixing in advance sharing settings says he was turned on...)

  Any ideas? I'm pulling out my hair. Thank you!

  Steve Woodward

  Seem firewall windows are playing games with you, try disabling it to see if it will work.

• I have two computers in Windows 7 which will not each other on my network. All other computers will see and can share files, but they connect between them.

  My HP laptop has installed Win7 Ult, the Fujitus Win7 Pro.

  Both computers were sharing the files back, outside a residential group, for a period of time. One day, they are stopped. No changes have been made to computers. I tried a restore of the system on each of them, and it did not help. I re windows loaded on the HP and that did not help. I don't think that it is only a permission of the questions that I used a windows machine 7 third to map actions to each of the individual laptops using their respective IDs. I can transfer files from one of them the "machine in the middle", then the action of the other, or as a copy/paste between them directly.

  WSD and NetBT will not solve one machine for others, but all other computers on the network will dispay on each machine. Only, they refuse to see each other. I have disabled the firewall. Password protected sharing, ensured that all netbios in the registry settings are correct. Pings between them are inaccessible returnded.

  Any help would be appreciated.

  Thank you!

  Hi Jonathan,.

  I see that you two computers on the network cannot see each other. I'll help you with this problem.

  1. don't you make changes to the computers?

  2 are computers on a domain network?

  3. do you have a router connected to these computers?

  Method 1:

  Open the HomeGroup troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2.

  Make sure that the following services are enabled on the computer.

  (a) click Start, type "services.msc" in the search and click on services. Verify that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 3.

  I suggest you follow the steps in this article.

  Enable or disable network discovery: http://windows.microsoft.com/en-US/windows7/Enable-or-disable-network-discovery

  Method 4:

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Refer.

  Homegroup:

  http://Windows.Microsoft.com/en-CA/Windows7/products/features/HomeGroup

  Let us know if you need assistance with any windows problem. We will be happy to help you.