Load not battery on the new Satellite L775

Hello

I just start with my new laptop L775.
Everything works well and the nottebook is pluged in about 2 hours.

Then my little pluged nice outside and it stops to liquidated.
When I now check the status of the battery is always 0%.

Is this normal at the beginning? It offered only when the system is off?

Thanks for your help

The Doc

Hello

Not quite sure if there is a problem with your battery, but if the adapter is connected to the laptop, then the battery must be charged. In this case, the battery indicator lit orange/amber.
If the battery is fully charged, the indicator should switch to blue/green.

What is the State of the battery indicator?
In addition, you should try the workaround posted by Akuma.
Remove the battery and unplug the AC adapter
Leave the laptop disconnected for a while (2-4 hours). Then connect the battery and the AC adapter and turn it on the laptop. Leave the laptop on the network until the battery indicator would turn blue. Then, unplug the AC adapter and check the battery status.

Tags: Toshiba

Similar Questions

  • Windows 7 does not start on the new Satellite C660-195

    Hello

    I just bought a Toshiba Satellite C660-195 with Windows 7 pre-installed.

    This morning I turned on it and it came with a black box with x:windows\system32\drvload.exe in it. This box then disappeared and Startup Repair kicked. He then told me that Startup Repair cannot repair this computer automatically. The notice were to remove any device that had recently been attached to the laptop (such as a webcam or music device) but I did not install a hardware or devices. I clicked finish and stop you the laptop.

    I lit it again and it's the same thing (new!)

    A forum would suggest trying the following: click on the link 'Show advanced options of the system and support recovery' who asked me to choose the configuration of my keyboard, but then when I do & click then it tells me "you must register to access system recovery options" I am never given the option connect!

    When using the F8 advanced boot options I'm still not able to solve this problem. The same thing (see above) that happens when I try to start in all security modes, last good known Configuration (Advanced), debug mode, start Windows normally etc. I don't understand it.

    Looking for other forums, they suggested dΘplaτant zero while running and then one selects Windows 7 to restore the laptop to its factory settings, but the same thing happens - it shows just the black screen with x:windows\system32\drvload.exe launched then startup repair, that does not solve the problem.

    I don't have a disc of windows 7 to restore since I only bought the laptop 6 days ago and didn't have time to do a still. In addition, the laptop must have the restoration on his hard drive, but I can't access it to restore windows.

    I'm just a home user understand all technical talk. Please can someone help me?

    Hello

    Sorry to hear you I have this problem. The fact is that the new laptops come with only HARD drive recovery image and not with recovery DVDs. What you can try now is to install the recovery image using HARD drive recovery facility.
    If this works you need out of the box again.

    Please do it following the instructions in this document - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    Please send us comments.

  • Installation is not complete on the new Satellite L510

    Started with L510 new, I don't think that the Setup completed correctly, had not start Guide so didn't know was going to take off if long, turned, so now whenever restart us keep getting "Setup prepares your computer for first use" and then welcome in windows 7 and experience of the box system preparation tool ", we click ok and get fatal error occurred trying to sysprep machine" have read in the forum and I tried to press F8 at startup, but do not repair my computer option.

    Any ideas where to now, am new to all this.

    >... didn't start Guide so didn't know was going to take so long.
    That's the problem. After the first boot recovery image installation will be launched and a lot of different drivers and software components must be installed correctly. This procedure can take more than an hour and must not be interrupted.

    I assume that laptop now stuck on some some step and the installation cannot continue.
    F8 option works when the installation is completed successfully.

    What to do now?
    I don't know where you bought this laptop, but maybe you can talk with your local dealer about your problem. If they have the same specifications in their showroom you can ask them if they can create the recovery to disk and you can use for installing the OS.
    Second option is to order directly installation disk from Toshiba under https://backupmedia.toshiba.eu/landing.aspx but you must pay for it.

    Let me know what you think of this.

  • FN keys do not work on the new Satellite L500-1

    Hello
    I just bought my new laptop (L500-1, windows 7 64-bit), and none of my function keys work.
    Does anyone know what might be the problem?

    Thank you
    Roni

    Hi Roni

    You have installed the 64-bit version after the first start, I mean original Toshiba recovery image? Do you have?

  • In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

    I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

    Hi HiteshAstan,

    one) don't you recall making any changes to the computer before this happened?

    (b) what exactly happens when you sign in to your account?  You get a specific error message?

    Step 1: Let us check if the problem persists in safe mode

    Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

     

    If the problem persists, you can deduct that the user account is corrupted

    Step 2: Create a new administrator account and then try to repair your user account

     

    Create-a-user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    After the back if you have any questions

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • CS4 will not load after migration to the new imac

    I've migrated just of my older iMac to a new iMac.

    When I try to load photoshop I get an error: 150:30

    Apparently my license has been affected and is not recognized for the new computer.

    I have the CD; However, the new iMac do not have a reader of DVD player.

    Can I download it from the adobe site?  If Yes, should I completely remove my old program CS4?

    Migration does not work for the Adobe programs.  Uninstall everything first, then use the cleaning tool before installing.

    Adobe Creative Suite cleanup tool

    helps resolve installation for CS3 thru CS6 and creative cloud problems

    http://www.Adobe.com/support/contact/cscleanertool.html

    CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  • Subject of the battery in the new update

    Hello everyone

    I want to ask about the battery in the new update

    I now have the update on my phone 6s but I noticed that the battery run off more quickly than in the previous update

    I used the phone every day and the battery last about 5 h 30 but now last 4 hours

    I hope you can me hel

    Thank you

    Yes there is a problem with ios 10 and 6 s iphone, apparently the 6s more users do not have this problem on the contrary the last update was better for them, battery last more I read.

    What can I tell you? I'm pretty bored too, in fact I intend now perform a downgrade of ios 9.3.5. I don't know if he is going to end well if...

    But definitely ios 10.0.1 does not apply to me with all these battery problems, whenever I have action now feels as if it was a 1% less than the battery well enough.

    I also read that 10.1 unveiled today that a new beta has been for developers, problems, this is the test As just started, we can expect minimum 2 more weeks for those who think to emerge officially much too long.

  • Question about password on the new Satellite A105 HARD drive

    I am the owner of a Satellite A105 and the hard drive was failing. I got a new hard drive but before I gave up on the current one I decided to wipe it clean and a few tools to see if it was a way to recover.

    Well, when wiping clean it restarts and then he showed me a message saying "password type of HARD drive internal" or something similar. I do not know the password so I can't use the hard disk more (or is there a way to reset the password?), but before you install the new hard drive I want to know if there could be a problem installing the new hard drive in the laptop without knowing the previous password.

    I mean, it locks the new hard drive or is it completely independent of the installed hard drive? The one I have is brand new, and I want to know if I plug it in and from the laptop are all I have to do?

    Hello

    If the HARD drive password has been activated and you don t usually know this password then the HARD drive is locked and can no longer be used.
    It s simply not accessible and it s not possible to remove this password.

    > I want to know if there could be a problem installing the new hard drive in the laptop without knowing the previous password. I mean, it locks the new hard drive or is it completely independent of the installed hard drive?
    I think that he should t be any problem with a new HARD drive.
    As I said the password is stored in the sector specials on the HARD drive. The old password should not exist on the new HARD drive (if the password has not been set).

    Best regards

  • I'm considering buying a computer with Windows 7. Is there a driver for my Canon Multipass F50 printer? I have Office Professional for XP - can I load office software on the new computer with Windows 7?

    I'm considering buying a computer with Windows 7.  Is there a driver for my Canon Multipass F50 printer?  I have Office Professional for XP - can I load office software on the new computer with Windows 7?

    Page drivers Canon MultiPASS F50 & the downloads shows nothing for Windows 7 (or even for Vista), so I doubt that it works.

    Microsoft Office XP is not compatible with Windows 7.  Office 2003 and Office 2007 are.

    I wish I had better news for you.  :-(

  • Acorn TV does not work on the new Apple TV

    So disappointed that the Acorn TV app does not work with the new Apple TV we just bought. We have subscribed on iTunes and nothing happens when you try to activate the software. We can look good on the MacBook, iPad and iPhone. Verified the purchase on iTunes account and that's fine. Contact Acorn and say it is a matter of Apple.

    Strange that I have to use Chrome to even write this question. Safari and hers do not work with the Support pages. I'll send in the comments.

    I'm resetting Apple TV now. We have been with the Apple TV since version 1. I hope that we can make this work!

    How would work appletv mount 1 app on the job?

    each app to live their own lives the appletv core do not even know what applications do they just

    Use the ios network to get their content

  • Safari now load of items from the new york times or IRS Web site

    Safari now load of items from the new york times or IRS Web site

    I tried to change the notifications including to get rid of all the

    I encouraged webgl and plug-ins

    In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

    Quit and then relaunch Safari a try these Web sites.

  • My Lenovo ThinkPad(red scroll) scroll function does not work in the new Firefox 4. It worked very well at point 3.6. Can you please fix this because it is a very important feature.

    (Middle button) scroll feature does not work on the new firefox 4. For this reason, so I need to move the scroll bar to move the page. It's very irritating problem, if you are a guy who uses the middle button to scroll. Can you if you please fix this...

    Thank you!!!

    I've updated to Firefox 4.01 today and the Center knob on my Lenovo T400 does more. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 by http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html , then uninstalled the 'Thinkpad Ultranav Driver' to add/remove programs, rebooted and then installed the update utility and driver (another reboot) and now it works perfectly.

    So happy to get it working again.

  • Apple not recognized with the new update ID

    What now, after the update

    Apple not recognized with the new update ID!

    I have the same question. The user and the password are ok because I can log in here: https://appleid.apple.com

    But after the last update my iPad say that "the apple ID or the password is incorrect."

  • HP laserjet p1102w: wireless printer does not work with the new wireless network

    My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

    Hi Shlomi,
    Thanks a lot for the info. I'll give it a try today...

  • Old games has not transferred to the new device

    Games on the old iphone and iPad has not transferred to the new iPhone and new ipad. Games show in Game Center, but didn't open at all or open to basic, start over.

    dlb104 wrote:

    Games on the old iphone and iPad has not transferred to the new iPhone and new ipad. Games show in Game Center, but didn't open at all or open to basic, start over.

    Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

Maybe you are looking for

  • Why iTunes Windows 8 is no longer play HD movies

    After the most recent update of iTunes at 12.3.1.23, iTunes on my desktop Windows 8, it will play no longer HD movies. All I get is a black screen. He n [' t gel - I can easily go out and play the Extras for a film, but not the film itself.] I have c

  • How can I find and download Windows XP Service Pack 2 (or higher) to a computer so that I can access the internet by means of a USB adapter wireless?

    I have an old, unused Dell Dimension 8200 desktop with professional MS Windows XP operating system. I am trying to connect wireless to the internet. At the suggestion of Dell, Dell, I bought a Netgear N150 Wireless USB Adapter Ondaaah 1100. When I tr

  • ThinkPad X 30: firewire boot

    I use the Thinkpad X 30 Usually, we can boot from USB DVD/CD (external) How to boot from firewire external DVD/CD?, possible? Thank you guzalim

  • WRT600N connection problems

    OK, here's a strange question that I hope someone can help me with because that so far the support of Linksys was distraught and once I have explain the question that I'm getting on hold then somehow, the connection being lost. so, it's back to the c

  • Error on planning time (problem)

    Hi guru,.I have a problem with planning time in operator ODI.I have a delay between the time clock in the designer and run calendar.For example, the designer I look 14:00. So I try to plan the work at 14:03. But the work starts at 16:03. Why?I tried