Loading and playing of music also works on Fuze & Ubuntu 8.10 - Possible with Win XP?

Similar Questions

• Can't seem to load and listen to music at the same time

  So I got my Droid X for a week now. A great phone. But I'm having a problem. Basically, I want to listen to music while it is connected to a computer via a USB cable to charge. "' Charge mode I guess put the phone in" only "would set the phone to use only the USB cable for power and not mount the sd card to access on the computer. However, this is not the case. I always get a message"your sd card is busy" when I do that. Any ideas? I don't want my phone to die while I'm listening. Battery life seems to be a constant problem win this phone that would be very nice if I could charge it for use.

  Just put the phone in 'PC' for USB Mode, plug it into your computer and you should be able to load and play music on the phone or the phone with the PC is turned off.    I throw my phone all the time that when I am traveling with Windows 7 on my laptop or Vista on my desktop when you work at home.   PC Mode is a shared reading where SD card is accessible by the PC and the phone and at the same time while allowing phone to load.

• Plug-and-Play Webcams do not work.

  I have two computers, both running Windows 7 Ultimate 64 - bit, literally installed from the same disk with the same updates, etc. On one of these computers (the one I use the least) my two plug-and-play zero configuration webcams work well and instantly. Instantly I prefer to use, they do not work at all, usually errors to the effect of "the device is already in use", although I have largely ensured that it is not.

  The major difference significant between these two computers on the front of the webcam is that the computer that is running, the driver, a times usbvideo.sys Details and ksthunk.sys loaded to the device, while one who does does not only usbvideo.sys loaded to it. He also stubbornly refuse load other drivers, like "windows determines that the best driver is already installed.

  It seems unlikely a typical software conflict because the two systems have the same software and when the question began the work machine lacked any software work there is no.

  In addition, tools like Microsoft Fixit or sfc/scannow suggested that the machine is perfectly configured, and no combination of uninstall / install drivers and reboot seems to have had no effect.

  I imagine that a clean install of windows would probably solve the problem, but I'd rather not have to resort to that.

  Note that none of these webcams have all the drivers for the seller: they are designed to use plug-and-play. Yes, I checked.

  Does anyone have an idea what could be the cause, or how I could solve this problem without resorting to the nuclear option?

  http://forums.Logitech.com/T5/webcams/QuickCam-for-Notebooks-Pro-not-working-on-64-bit-Windows-7-using/TD-p/414106

  This link had a few promising information to, my registry contained no ksthunk in the appropriate location. I'll have to see if it works after restart.

  Edit: He did indeed. Webcams, works fine now.

• I would like to know if the IPOD Nano is able to connect and play the music of my Time Capsule Machine. Thank you

  I would like to know if the IPOD Nano is able to connect and play the music of my Time Capsule Machine. Thank you

  N ° iPod nano can play that media that is loaded on it.

  TT2

• Load and play different external MP3

  I wanted to do something that I thought was simple - I wanted to have a read of the sound (external mp3 loaded) and have then different buttons on the screen that are responsible for another song instead.  Could someone help me please?

  That's what I'm doing:

  var myMusic:Sound = new Sound();
  var reqMyMusic:URLRequest = new URLRequest ("mySong.mp3");
  myMusic.load (reqMyMusic);
  myMusic.play ();

  music1_btn.addEventListener (MouseEvent.CLICK, music1);

  music2_btn.addEventListener (MouseEvent.CLICK, music2);

  function music1(event:Event)
  {
  LOAD AND PLAY A DIFFERENT MP3 (instead of mySong.mp3)
  }

  function music2(event:Event)

  {

  LOAD AND PLAY A DIFFERENT MP3 (instead of mySong.mp3)

  }

  use:

  var myMusic:Sound = new Sound();
  var reqMyMusic:URLRequest = new URLRequest ("mySong.mp3");
  myMusic.load (reqMyMusic);
  var sc:SoundChannel = myMusic.play ();

  music1_btn.addEventListener (MouseEvent.CLICK, music1);

  music2_btn.addEventListener (MouseEvent.CLICK, music2);

  function music1(event:Event)
  {
  SC. Stop();

  myMusic = null;

  myMusic = newSound ();

  myMusic.load (new URLRequest ("whatever"));

  SC = myMusic.Play ();

  }

  function music2(event:Event)

  {

  SC. Stop();

  myMusic = null;

  myMusic = newSound ();

  myMusic.load (new URLRequest ("whatever"));

  SC = myMusic.Play ();

  }

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Newby Question about downloading Podcasts and play on music video more

  I get my new podcasts from a variety of sites of English radio (six or seven), including CBC, BBC, NPR, etc..

  I use MS Vista with FLOW RSS to download.

  I noticed that some of the podcasts automatically from one to the other on my video play, and I noticed that some of them are grouped in the other subdirectories, and I have to fix each subdirectory to play these. What I understand reading this Sansa community site, my camera Clip done automatically for me.

  On my very old mp3 player, he would like to download all my podcasts in a directory and I play a podcast to the next, non-stop. For me, it was easy and without violin.

  I discovered, yesterday, that if I had used entered MS Vista the-properties of the mp3 files downloaded and selected the 'details' and them selected "remove properties and personal information", as all the podcasts would change and liquidate showing them in two folders on my Clip 1. 2 podcasts. Records

  I have two questions;

  1. I lose all the features on the Clip, when I do this? I noticed, that he still remembered when I left a podcast before the end, and I want back to him

  2. is there an easier way for me to get all the podcasts in one place, so I can not listen to stop without changing the records? and without having to delete the properties and each of them?

  Help is very appreciated. Thank you

  "Not all of them appear in the directory"Podcast"on the Clip. All except a show in the directory "Folder" on the Clip. "

  If they are in the folder podcast on the player, they should all be available in the submenu of podcast. Some may be listed as unknown though, if their title tag is missing. When you navigate using the submenu podcast, this is done using the title tag. Why edit tags that may be missing or in error is a good idea.

  You could use the navigation in the files and play them all if there are no subfolders.

  However, the best idea is to group the podcasts in albums (with each file in an album with the same tag to album). Then you can read the album of podcasts as a series. The advantage of this is that if you read some files from podcast in the series, music, then turn off the player, when you return to the submenu podcast, the reader will remember what podcast file is changed during playback.

• Most sites work OK, YouTube loads and plays videos, if I try the connection that the page does not load, and all I get is a page of random characters?

  The above doesn't happen if you use Firefox and not other browsers?

  You can check the preferences of network.http. * on the subject: config page and delivery to zero all users "BOLD" network.http set prefs by default via the context menu-> reset.

  Check at least:

  • Network.http.Accept - Encoding (default: gzip, deflate)
  • http://KB.mozillazine.org/about:config

• The video is slow to load and play

  When I try to play a video or music, it does not play correctly, it is time really slow or just guard stop and start

  What I tell you so that you can help me I also have Windows XP 9.0.

  My PC was playing very well week last of videos and films, but even not more megavideo has become pretty darn slow I could go on for an hour and it does not load so slightly. What I did wrong in my internet options, or the deletion of cookies. How can I solve this... PLEASE SOMEONE HELP ME BEFORE I LITERALLY BROKE MY PC... And I don't want to do that... but I get frustrated and very PISSED OFF in MY PC... WHEN I chose the wrong settings for my AVG?

  JUST FOUND THIS AND HIS WORK AS HE WENT OUT THE BOOX...

  1. CLICK ON START

  2 CONTROL PANEL

  3. INTERNET OPTIONS

  4 ADVANCED

  5. ON THE BOTTOM OF THE SUCCESS PAGE RESET

  THIS WILL RESET ALL YOUR INTERNET SETTINGS...  AND IT WORKED...

• Netflix instant movies will load and play on my computer, stuck at "loading".

  I have a HP TouchSmart300 PC with the Windows 7 operating system.  Recently I can not access my Netflix instant movies.  Can I purchase my movies, but when I select a movie to play, it scrolls "loading".  All movies doesn't load, same result, 'loading '.  I saw last successfully a film 23/04/11.  I got to 31/03/11 with no luck.  I don't know which driver executes the program.  Any help would be appreciated.  Thank you.

  Hello

  I suggest you install the latest version of Microsoft Silverlight and check if it helps:

  http://www.Microsoft.com/Silverlight/

  Also try to uninstall any previous version of Silverlight before installing the new.

  Hope this helps,

• My Flash Player stops loading and playing to halfway through - Help!

  Hello

  On my browsers Chrome AND Firefox for Windows 10 (installed on Chrome 21,0,0,216 flash drive) whenever I have a video in particular, the buffer or loading happens to halfway across before it goes to the end and then the video plays only to halfway.

  I tried

  -Cleared my cache of web browsers and history

  -Removal of all websites in Flash Player storage settings panel

  -Restarted my computer / browser / modem.

  -Uninstall and reinstall flash

  -Tried to increase global storage settings (will not save)

  -Contacted the video website and they confirmed there is no problem on the end here and to rub salt on the wound has sent a screenshot of the video beyond 50%

  -The website even gave me another connection to try but it still doesn't work

  I would be appreciated from anyone to help, thanks in advance and good luck.

  I think that you posted your question in the wrong forum. Please click on FlashHelp crumbs above this post and see the sticky "this forum is NOT for Adobe Flash and Adobe Flash Player problems. There is a link to the correct forum.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge

• Go to the next image after movie loads and plays

  To all,
  
  I try to get my file from master.swf to load a separate film called 'splash.swf' to play at the end of the film "splash.swf" then go to the next section and load the next movie called "home.swf".
  
  what I have so far:
  
  Stop();
  dyMCL.loadClip ("splash.swf", 5);
  
  * what I need *.
  
  If (condition) {}
  gotoAndPlay (3)
  };
  
  Any thoughts?
  
  
  Thank you
  
  Kyle

  OK, so that work very well! I made a few changes, but everything works. Thanks for your help!

  dyMCL.addListener (this);
  dyMCL.loadClip ("splash.swf", 5);
  function onLoadInit(mc:MovieClip) {}
  dyMCL.removeListener (dyMCL);
  checkFrames (mc);
  }
  function checkFrames(mc:MovieClip) {}
  mc.onEnterFrame = function() {}
  If (this ._currentframe = this ._totalframes) {}
  _root.gotoAndStop (3);
  load home.swf
  delete this.onEnterFrame;
  }
  };
  }

• loaded and played football manager 2010, but used now run on my games page, but does not

  downloaded and then played for a few hours of game save, but when I got to play this new game clicked inserted disc but no response

  Hi batty64,

  (a) do you get an error message when you insert the disc?

  Insert the disc in another computer and check to make sure there is no problem with the disk.

  (b) is any change happened to your computer after you have saved the game?

  You can also try the System Restore and see if it helps

  Access the link.

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  You can also post your question here: http://www.footballmanager.com/

  Or try to contact the game manufacturer

  Aziz Nadeem - Microsoft Support

• Is there a way to get the Audio to load and play automatically when the user turns the page?

  I am creating a musical application and I would like a sample of the audio play when the user opens a page. I use Indesign CC and building an app for iOS. I didn't know the function that allows me to do this? If anyone knows the answer, I would be very grateful.

  Thank you

  If you use DPS you can add the audio file in the Panel inlays Folio select Audio/video and enable automatic playback.

  See our help section at http://helpx.adobe.com/digital-publishing-suite/help/audio-video-overlays.html for more information.

  Neil

• Computer crashes constantly and now videos take forever to load and play.

  When I look at where they come from, my computer hangs like a madman and half the time, I just videos, case is not giving up the video.  My computer freezes constantly, and yet everything is updated and functioning.  I could be reading a news article and all of a sudden the whole system goes black and white and then after about 30 seconds the computer turns off.  I cleaned it with canned air and everything recommended.  Can I go back to Windows 8 and abandon 8.1?  I need assistance with these issues and in other words please.  Why this keep happening?  What are the viable alternatives are there for all these problems?  Nothing started happening until my computer updated automatically with 8.1 and now has been a year of nightmares constantly.  Help, please.

  Helpless and needs fixing

  I'm no expert, but I think that there is a problem with the Windows updates for 8.1 and HP desktop computers, dragged my mouse, its has been staticy with snoring and crackling and video would freeze intermittently. What finally fixed my machine was a complete restoration and blocking the windows updates. Now my machine is perfect except for the fact that the heartbeat sounds terrible. The beats are working fine now, they sound just terrible.