Plug-and-Play Webcams do not work.

Similar Questions

• Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Hello

  Since you said it worked very well recently, I'll try to do a system restore at this point in time.

  See this link: http://windows.microsoft.com/en-us/windows7/products/features/system-restore?SignedIn=1

  In addition, see the response of the Meghmala and follow the instructions listed there. I think that the three method might be the best of the bunch for you, but they have all the right steps.

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1

• Plug-and-play webcam problem

  I installed a webcam plug-and-play. All the drivers were successfully installed and it is listed under devices as being upwards and running, however I can't find anything to open it and use it. Help?

  Hi Raldir,

  It would be great if you could answer these questions to help you further.

  1. what happens when you try to access the webcam, summers - get you any error message or error code?

  2 have you made changes on the computer before this problem?

  3 are you referring to a webcam in the generation?

  This problem can occur because of driver or settings problem, try the following methods and check if it helps.

  Method 1:

  Run the hardware troubleshooting tool.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:

  I suggest you to uninstall and reinstall the webcam and check if it helps.

  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Hope that the information provided is useful.

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Digital satellite P200 (PSPBGA) - footprints and the webcam will not work on Windows 7

  I use a Satellite P200 (PSPBGA) and have upgraded from Vista to Windows 7 Ultimate 32 bit.

  However the Toshiba Fingerprint Utility and Web Chicony Camera Assistant Software both do not work. I checked and there is no new update on the Australian site.

  Can you please help me with these two questions?

  Hey Buddy,

  I think that in this case, you can't do anything. I mean Windows 7 isn't on the market yet and at the moment there no drivers available. You can only try the Vista drivers because most of them are also work on Windows 7.

  Alternative I founded on the Toshiba page we some drivers beta Windows 7. Maybe they work:
  http://www.CSD.Toshiba.com

• my cd-rom and the webcam does not work

  For awhile, my CD player has not worked. I get the same response when I try to trouble shoot, the disk is damaged or missing. And just recently I realized that I can't access my web cam. I use a xhooua Pavilion #aba

  Sorry to post the solution a bit late.  Please follow the steps mentioned in the link below.

  For CD/DVD drive problems

  http://support.HP.com/us-en/document/c01897812

  For Web cam issues

  http://support.HP.com/us-en/document/c02452221

  After the update of the solution provided for further assistance.

• USB ports of my son and the webcam will not work. We get "driver webcam open fail." "Please restart camera or computer" and 19 code for USB

  In the Device Manager say USB controllers ' Windows cannot start this hardware because its information for configuration (in the registry) is incomplete or damaged (Code 19).»  We have already deleted the drivers and rebooted (did not work) and tried a restore from the registry, but there was nothing old enough to return to. Now what?

  Hello

  There could be a hardware problem that just happened to come while he was on the system.

  Disable Legacy Support just in case he has a problem - don't forget to put back so no joy. Look to see
  If there is another USB settings and check with system manufacturers.

  Maybe an upgrade InPlace or even a reinstall of Windows would be useful.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Don't forget to do a good backup, or three if you
  keep the data.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Several options below.

  You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
  totally your data off the drive of backup, and you need to reinstall your programs. If you do not
  Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
  Then you can make a complete new installation - just select the format options that erases the entire disc (this
  Clears all data as well).

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 and Akai APC40 Plug and Play, no driver not found?

  I just bought an Akai APC40 Ableton Live 8 and every time I plug my apc, it evokes the installation of the device NO DRIVER FIND driver... I thought Windows 7 made controllers like this plug & play compliant? There are no drivers on the Web site to find it to download?

  It's on my Asus Notebook FS3c and I've upgraded to Vista! I reformatted and re-installed windows 7 for dealing with this problem, but nothing helps!

  I run once before that I got the virus and had to download by entering a general driver I suppose that my laptop was missing it's been over a year and I have no idea what it was called, but I of course wish I remembered fml

  Hi Chi,

  Site Web de Ableton has an available for download PDF file that specifies the installation method:

  http://www.APC40.com/downloads/docs/Akai_Pro_APC40_Quick_Start_Guide.PDF

  

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a new laptop and my integrated webcam does not work

  I need to get help fixing it. It's a brand new computer and the webcam does not work. When I try to access the program, it said that I need to plug a camera

  Hey amaury Muñoz.

  Welcome to Microsoft Answers Forum.

  1. can you please tell us the model number of your computer?

  2. is there a built in webcam or what is the model of your webcam?

  Can you please give us a little more detail on what is the specific error you get when you try to use the webcam?

  Check if you have the drivers installed for your webcam.

  As you say that it is a Dell computer, you will need to go on the http://support.dell.com website to download the driver of your webcam installed.

  Click on support and drivers.

  On the next page, it asks your name and your number.

  Select the exact model of your laptop.

  This will bring up the option to select your operating system. Choose Windows Vista or Windows Vista 64-bit.

  A webcam installed usually appears under the software - multimedia, but it may be different for your model.

  You can choose to install now or download. Once it is downloaded and installed, then test again to see if your integrated webcam works.

  You can also contact Dell for support, since this is a brand new computer. Here is a link to Dell's Support page options:

  http://support.Dell.com/

  Thank you.

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Plug-and-play is not listed on the list of services

  I am running Vista; USB, camera and microphone don't work; did some research and found the plug and play service is not listed on the service list so I guess that is not currently running.

  How to start the service?

  Hello

  ·         When you connect a USB device to the computer it gets detected?

  ·         You receive an error message when you connect a USB device to the system?

  I suggest you try the methods provided below and check if they help to resolve the issue.

  Method 1:

  See the link below and run the fix it tool, or follow the Troubleshooting Manual for solving problems with USB devices in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

   

  Make sure that the plug and play Service is set to automatic and started. To do this, follow these steps:

  one), click Start-Run, type "services.msc", click on OK.

  (b) when loading the Services window, navigate to the 'plug and play', double click on it to open it,

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change.

  "(d) if she once said:"Automatic", then click on the "Recovery" tab at the top, change the first"

  Line for "Restart the Service" failure", then click on" "apply ', then OK. "

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• Plug-and-play driver needed

  Hello

  have some problems with the plug-and-play driver - can not update, as it "works fine and any updates do not need" according to windows. But is that the plug-and-play driver problem is the reason for sound, webcam and some other functions do not work properly. Also can not find the plug & play driver among the drivers in the other. Can anyone help with this issue?

  Hello

  Sorry, but I don t know what you mean with the plug-and-play driver. What part of the hardware, you need another driver?

  In addition, it would help if you post your model correct portable operating system.

• Satellite C850-A797 webcam does not work

  I have Toshiba Satellite C850-A797 and my webcam is not working
  I think it is because of the update of Windows and * the new interruption of the software every time I download, *.

  It is the problem of toshiba server because I think that

  Help, please!

  Hello

  Question 1)
  What system do you have? As I m not wrong of the C850-A797 Satellite has been pre-installed with Windows 7 64 bit.

  Webcam drivers, but also other drivers for Satellite C850 series can be downloaded here:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  In fact, I downloaded the driver for the webcam to the page above, and it worked correctly.

  Check this box [webcam driver v 2.0.3.39 for Windows 7 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7499 selSh ortMod = null & language = 13 & selOS = 30 & selType = 315 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 315 & page = 1 & ID = 88046 & OSI D = 30 & driverLanguage = 42]

• NB200-10Z - webcam does not work

  Hello

  I have the NB200 and the webcam is not working. I got to the dealer who said before referring to Toshiba, they would charge the system and I loose all my data.

  Very well, then wait, as the dealer is two hours away, I decided I could as well, rebuilt the hard drive, downloaded the software referenced still nothing cam.

  Anyone found another solution for this work without having to send to T?

  Hi seanseamour,

  > web camera it does not work.
  Does that mean exactly? Get you an error message or it doesn't show a picture?
  It would be interesting to know more details

  In your case I would try update BIOS and using factory settings. If that doesn t work, you need professional help of an authorized service provider.

• Webcam does not work on all new Satellite L750 - 17 p

  Hello

  I bought a new Satellite L750 - 17 p and the webcam does not work. I tried to reinstall the drivers of webcam on the Toshiba site, someone at - it ideas? Similar problems?

  /AK

  Webcam doesn t work
  How to understand this?
  This statement is too general.

  Can you offer more details please?