Loading AOE2, the installation stops at 4%

Similar Questions

• When I try to install v.6, CD or as copied photoshop folder on the desktop, the installation stops with "Error1310-error to write to the file. Make sure you have access to this directory.

  When I try to install v.6, CD or as copied photoshop folder on the desktop, the installation stops with "Error1310-error to write to the file. Make sure you have access to this directory.

  Please see:

  Error "1310: error writing to the file: C:Config.Msi...» » | CS4 products

  I hope this helps.

  Greetings

  Megha Rawat

• Installation Gingold EIB 50% in Alberta, the installation stops at 50%

  Hallo und herzlich willkommen zu einem vielleicht trivialem problem.

  Ein Versuch einer French Übersetzung wird options below.

  PC-Info:

  -Win XP, 32-bit

  -Opera 36

  -Flash Version 23.0.0 *.

  In addition, vor ein paar days konnte ich keine videos laden mehr mit der message "Could not load the plug-in.".

  Daher die assumption ein neues Flash Update ja und da war eins.

  Difficulty zu Adobe installer downloaded und ausgeführt, Abbruch EIB 50%.

  Keine Fehlermeldung, das Installationsfenster nur Abbruch shows a und eine Beforderung zu den offers

  normal Fehlerbehebungsmoglichkeiten Reaktion year: taste wir das ganze 100 hurt again, same result.

  Uberpruft, ob Flashplayer aktiviert ist wohl auch etwa 50 evil gemacht und ja er ist aktiviert wurde.

  Neue Losungsidee: complete deinstallieren und dann again taste: hat nicht works.

  Also nochmalige uninstall und eine offline variant downloaded Version 23.0.0 daher die go (*).

  Klar, das da das Update fehlt, also wieder zu adobe, downloaded 50% installation Gingold EIB ab.

  Nach Installationsfenster wird bis 50% noch "Download" ausgeführt.

  Nun bin ich mit meinem which am Ende und hope yesterday auf Hilfe

  Beste Grüße ~.

  English version:

  Hello, a few days ago I could not load more videos with the message "Could not load the plug-in.".

  My Conclusion was a new update for Flash Player and it is correct.

  Adobe, the downloaded installer, installing enforcement when it overwrites the 50%.

  No error but the installation window shows the breakdown and gives a hyperlink to normal

  opportunities for error. My reaction was to try in the same way, a few times more, same result.

  While doing this, I checked if my flashplayer would be activated in the browser and yes it was.

  New idea: Uninstall Flash Player and reinstall from 0: stil does not.

  Again uninstall and try an offline version: 23.0.0 (*).

  Well, that is not up-to-date is still clear to me. Then to adobe, download, install and run over 50%.

  The installationwindow shows up to 50% 'download '.

  In hope, my English version helps a little and is not too terrible if it is needed and you can help me,

  What about ~

  Hello

  There is a problem with Flash Player on Opera on Windows XP / Vista. We'll fix that soon, until then you can download FP version of page 22.0.0.209 archived Adobe Flash Player versions .  Download the fp_22.0.0.209_archive.zip package, and use the Setup file named flashplaye22_0r0_209_winpep.exe. During installation select "notify me to install updates option" so that Flash Player does not update silently and you don't face the issue until its fixed.

  Thank you!

• Stop disc spinning when installing a game... (the installation stop)

  Hi, I sat with this problem for some time, with vista + sp1, the problem is, when installing games on my system, the game will install but only up to a point, then it stops and the driver (cd - dvd) repeatedly turn hangs just at the same place and there it will stay, that's why the computer stop responding

  I tried to re - install my driver but the problem still there...

  I tried to contact HP for assistance, but they could not help me...

  My hardware is: TSSTcorp CDDVDW TS-H653N

  My computer is: HP Pavilion Elite m9342.me

  Processor: core 2 quad 2.40 GHz processor

  RAM: 4 GB

  video card: nVidia 9500 GS

  I bought it just before 2 months

  Help, please

  Yes Windows has to be reinstalled or the disk drive needs to be replaced. One or the other.

• Discover the installation stop with error 1920 composer

  I tried with below KB KB VMware: Horizon View Composer installation fails with the error: error 1920 Service Horizon VMware View Composer (s... and no luck.)

  Hi James,

  Please check below the thing.

  Compatible OS & DB put in correspondence with the composer of the view.

  Check database connectivity is correct and you have provided the necessary permissions to the user to DB.

  To above task to create DB user and provide the authorization of database.

  Also, make sure that you have downloaded SQL Native Client 10 for SQL 2008 and windows Native Client 11 for Windows 2012 SQL connected using the SQL user.

  This same SQL user used for the ODBC connection must be used on the installation of composer.

  I saw 1920 error if you do not follow above things, especially if the ODBC user name not matched with view facility composer

• Error 1335, the installation stops

  Installation of 11 items will stop with an error message: Error 1335, file CAB Data 2. cab is damaged or cannot be used. I ran Adobe Support Advisor and didn't get any results. What should I do next?

  You can even refer to http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html

• Error 1304, writing to ftr.configuration.dll. I try to install a software called The Record Player 5.4.2 (latest version) and the installation stops at halfway.

  It is a digital audio software used in the transcription process.  I use Windows XP and updated with (SP 3).  I think I need to grant approval of software to access the files already on the computer, but do not knpw how to do this.

  Hello
   
   
  1. have you made changes on the computer recently?
  2 are you able to install other applications successfully?
   
  Error 1304. Error writing to the file file name and location. Make sure you have access to this directory.
   
  Refer to the article that explains how to take in hand.
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421
   
   
  I hope this helps.

• Cannot open the exe file in Windows 7. The program opens in XL, but when I select this compatibility and all the others, the installation stops with the message return WinExec failed = 216.

  The software opens with a lock to the computer, it opens on to and then can be copied from there to another computer.  The program has been downloaded on all versions up to XL.  The 64-bit to 32-bit conversion programs do not allow a download on my Windows 7.

  Hello

  Try this hope of link, this will help you
  http://www.FixYa.com/support/t5004203-winexec_failed_return_216
  Mo /.

• Counselor says that I can run Windows 7. Installation stops and says hardware not compatible. All advice appreciated.

  Go to the last part of the installation, the installation stops and returns to Windows Vista. Receive the message "hardware not compatible". How can I find the material that is causing the problem?

  Hi, Jerry,.

  Uninstall your antivirus software

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software: anti-virus, firewall etc. Don't forget to activate the Afterwords.
  3 make sure that your computer has the BIOS and latest drivers. Update of the BIOS can be risky, don't do that if nothing else works.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If using a video card and the computer has integrated video use and remove the video card.
  6 unplug the computer from the internet, if you have wireless disable.
  7. RAM (memory) - reduce the amount of RAM. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful. If you added new RAM make sure it is also compatible.
  8. If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.
  9. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.
  10. If you click 'Upgrade' to start the installation make sure that you take a supported upgrade path. You can't make a square by update: type A) XP to Windows 7, B) fuse change - 32 to 64-bit, C) change languages, D) decommissioning editions ex: Vista of the month last 7 Pro, or E) Vista Home Pro 7.

  11. check your RAM (memory) to find errors. Can take a long time, don't make that if nothing else has worked.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  12 turn off startup programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

  -TrekDozer-

• TOSHIBA Libretto SD Card - gel after the installation of the SP3/Windows Update

  Hello

  Since the installation of SP3 via Windows Update on a new installation (Original Toshiba Recovery CD) my card reader SD freezes Windows after putting the card in the slot.

  The card is OK and formatted.

  Besides updating windows doesn´t work more.
  I´ll to pass the message on the updates, and the installation stops.

  The patch couldn t be installed because there is a problem with the computer.

  I m of the Austria and I translate to English.
  Hope you can read and understand it - perhaps someone has a solution.

  Best regards

  Ingo

  Published by: ADMIN

  Hello Ingo

  Last days, we read more similar reports on the various problems after installing SP3. As far as I know that Toshiba has faced similar problems after SP2 release and updates were offered. The fact is that SP3 has a negative influence on the different drivers and Toshiba has designed tools and utilities.

  For now, Toshiba has not any update and we need to see what will happen in the future. I always use SP2 and do not have similar problems on my laptop satellite.

  Or you can live with it and wait for update or restore BONES on time earlier and remove SP3.
  I see no solution at the moment.

• Windows Module Installer stopped and was closed

  My computer tried to do update KB976264, KB979306, 976662 KB and KB979099 and after the start-up of the plant and about 23%, it stops and I get the installer stopped and has been closed error. I checked to make sure "Module of Windows Installer Service" is in "manual mode". I tried a clean boot and also a restoration of systems without success. I erased the history and cookies. I disabled the firewall and antivirus.

  I'm looking for any other suggestions get my updates of work as I am running out of ideas?

  Thank you

  Well, after getting a MS help without success, I decided to upgrade to Windows 7. I had thought about it in any case if this just pushed nme along.

  Thanks for your help!

• Failure of the installation of common administration UI elements

  I try to install Windows Services for Unix 3.5 on a work computer that is running Windows XP Professional.   The installation gets there where she is "Installing WBEM components: namespce.mof.  I get an error saying "The commune Administration UI elements Installation failed."  Then the installation stops.  Can someone help me with this?

  Hey Tyler,

  I suggest you post this question in the Windows XP IT Pro forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro

  Thank you.

• Unable to remove/change WINDOWS $. ~ BT preventing the installation of Windows 7.

  I was installing Windows 7, and, after several attempts, where he met an error 0 x 080070570, I deleted the three folders in the C: drive starting by ' $', as shown in http://social.answers.microsoft.com/Forums/en-US/w7install/thread/2ebae9fe-e99b-40db-8fde-a14d6eea69f7/?prof=required&wa=wsignin1.0

  This time, he got up to 20% on the stage of 'Collection programs' installation, when the installation stops suddenly. An error message appears, saying that "Module of Installation Windows", or something to that extent, has encountered an error and stopped. I tried to restart the installation, but the installer of Windows 7 said that it could not crush the $WINDOWS. ~ BT file. It was one of the files that I had previously deleted. I tried to remove it, but I denied permission. I'm on an administrator account running Windows Vista SP1. Now, the installation does not start even upward. What can I do?

  Hello Dudboy,

  You will need to take ownership of the file.  This section here give a few steps that you can use to try to take ownership of the file in question to proceed with the upgrade.

  Regards, ~ Alex T. ~.
  ~ MVP Windows desktop experience ~

• Question about the installation of ESX 3i on IBM HS21 Blade

  Hello. I am trying to install the ESX 3i on the IBM HS21 Blade, but during which there was to "start VMware ESX 3i.......................... "and refuses to go forward.

  In this screen, the process bar would normally at first and then quickly run 80% all of a sudden. Then he standed there.

  I had tried another Blade (also ibm HS21) and ESXi image is guaranteed to be correct (in fact, the installation process was proved OK on another DELL server). The LIST is the following:

  1 VMware ESX 3i build 123639

  2 IBM HS218853 HSI

  How could I do with it? Someone told me that maybe some of the HW in HS21 don't is not supported by ESX 3i, is it true?

  PS: I tried to install the u3, ESX 3.5 on the HS21, too. Finally, the graphics mode cannot be loaded after the installation.

  Try pressingf1 or ALTF12 ALT to see if there are error messages.  You have 1 or 2 physical processors installed?

• Error 0 x STOP 00000050. Then load needed DLLs for HAL. Cannot run the installation program for the repair of installation CD.

  Are automatic updates, run every day. McAfee and SPyware Doctor, has problems with scans of Intelligaurd causing the reboot. Then the PC crashed.

  KM45,
  Here are some articles that cover some causes of the error code that you are experiencing.  If none of these match your situation, you can search Microsoft Product Support for this error code, because there are several other articles related to this code.  What happens when you try to start with the installation CD?  You get an error?

  Article 1
  Article 2

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.