loading of vi with operator interface

Similar Questions

• Problems to show the driver IVI and property loader error messages when you use a type of operator interface

  I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

  Hello, Johann,.

  I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

  concerning

  Samuel

• Many commands disabled in the operator interface

  Hello

  I use the full IO in c# on a system with a basic deployment license, and I see that a lot of commands is disabled, for example single-pass and execution (only Test DUT is active); also "Break" and "Break all ' in the menu debug is disabled when the system is running.

  I remember those who are active on other systems in the operator interface and I also checked that it uses the model that I use on all machines.

  What can cause such behavior?

  Best regards

  Peter

  Peter,

  It is a question of privilege.  What are the permissions of the user that logged in TestStand.  If it's an operator then you will see thos grayed out like that.  If it's a developer, technician or administrator, so they should be available.

  Kind regards

• Operator interface

  In the operator Interface Simple how would you code hard of a sequence into the window open the sequence file?

  Hi, Clint Eastwood. One way to do this is shown in the attached screenshot.  After the 'start' invoke the node, you can set down a 'OpenSequenceFile' invoke node (pass in a reference to the Application Manager) and then wire in your path to hardcode.  It is just a string constant.  You can then place down a property node "SequenceFile" (pass in a reference to the sequence of file View Manager) and wire in reference to the release of OpenSequenceFile.  This will fill the sequence files drop-down list box.

• For the complex data type, how to generate the Dll with compatible interface to C/C++

  Hello

  I used the Labview FPGA module to develop test equipment. Now, I need to write a driver that is to be a Dll with compatible interface to C/C++ for this equipment. So that my client who is familiar with C/C++ can call the driver without any study on labview. But I had a few problem on how to convert labview for C/C++ data complex data type. To clearly explain to my question, I have attached a simple example. (see attachment) I try to generate a Dll for the attached example VI and get the the function prototype at the head of the files as below:

  ' void OpenFpgaReference (LStrHandle * RIODevice, TD1 * errorIn, LVRefNum * FPGAVIReferenceOut, TD1 * errorOut).

  As you have known, the type of data "LStrHandle * RIODevice" and "LVRefNum * FPGAVIReferenceOut" Labview data format are. C/C++ do not have this kind of data type and can not reconige it. As a result, I can't call the Dll of C/C++ programming language. How to convert these two data type of labview for the C/C++ compatible data format, and then build the Dll? Anyone know about this?

  The answer is really apprecaited! Thank you in advanced.

  Ivan.Chen wrote:

  As I found in the following article:

  http://digital.NI.com/public.nsf/WebSearch/FB001AA027C8998386256AAD006C142D?OpenDocument

  LVRefNum is the name of resource of LabVIEW VISA or refnum, and "it is impossible to convert LabVIEW VISA name of resource or refnum VISession valid ID."
  This means that external code modules can not access & control the session VISA which is open by labview. But for my purposes, I will not attempt to access this VISA extenal code(C/C++) session. I just hope that save this session VISA in the external code once I opened it in Labview dll; and pass it to the labview dll when needed. While I have not need to login again when I need to control the device. Is it possible to do?

  A LVRefNum is really just a single int32 value. Its meaning is useless for other environments than those who created it so that you Michael not any what in C/C++ caller but pass it back to other functions in your DLL, but this often isn't a problem at all.

  You can take the following statement of the LabVIEW extcode.h headers and add them to your delabviewed header files to make it work in such a way.

  #define Private (T) typedef struct T # _t {void * p ;} * T}

  Private (LVRefNum);

  The LStrHandle you must set a standard C string instead in your export DLL and document what is the size of the string buffer should have if it is an output parameter.

  TD1 error clusters should also be divided into their parameters (C compatible) separate for all items or just to the left of suite entirely.

  Rolf Kalbermatter

• Windows Vista - I recently updated my free dongle and now its loaded and saved with a mistake,

  Original title: salvation

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hello. Please download this free uninstaller.
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  and remove the software and reinstall and check.

• Can not see/load a CD with Vista.

  CD player works for movies, but doesn't load the CD with the data on them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Should which CD or DVD format I use?

  See you soon.

  Mick Murphy - Microsoft partner

• PIX 515 with several interfaces see each other

  Hello

  I realize that this question has been asked in different ways, but I have yet to see my way. My problem is we have a pix515e with 6 interfaces, all interfaces can go out to the outside world very well, but they can not cross to the other. We do not have any router behind them, we 10.0.0.1 and 10.0.1.1, etc. as interface id how to see the other side of the other I need 2 interface see interface servers and even inside. Also how can I get ip addresses translate. for example we have a mail server on the inside interface with 10.0.0.60 translated in X.X.X.60 on the external interface if the outside world can see. Computers of the interface 2 see this machine as X.X.X.X.60 not the fact that it is on the interface right next to her, and therefore can not find. Inside machines translated at 10.0.0.60 address please help. and I hope that this can be done without routers behind the pix.

  Sincerely

  Jim Kiddoo

  Hello

  is it possible to display your config? It would be much easier :-)

  Please replace the public ip and remove the passwords. Thank you!

  Kind regards.

• With opera blackBerry Smartphones download applications

  So, I would download applications with mobile opera. When I press the download button the blackberrys own browser appears and tells me "your device not currently has in the browser configuration service book entries. Contact your service provider to enable the browser on your device. »
  So I think that I can't use blackberry browser or app world without wifi because I live in Finland and nobody sells BlackBerry here. Some how set it so that I can download apps with opera?

  Another question that I could not understand is what can I somehow send mms and use the browser with my 3 g unlocked torch (blackberry do not support my country with appworld)? I asked help from my service provider, but they have not yet heard of this phone.

  Yes, well, you can install a generic services directory, but you won't get the BlackBerry browser for free, charge your BlackBerry data service provider and they have been in business for a reason... make money.

  So, you really need to pay for what you use.

• Is it possible to load your phone with the Office using the cord with head phone the ends of both sides?

  Is it possible to load your phone with the Office using the cord with head phone the ends of both sides?

  No, only USB.

  Taken head phones don't have any power.

• How to deal with operating system windows 8.1 and apps on usb device

  Hi, I have a laptop Lenovo G505. Windows 8 64-bit was preinstalled in it. Later, I upgraded to 8.1. Laptop is almost 9 months and still under warranty. Since a few days, built Lenovo solution Center alert this analysis of hardware detected failures in one or more devices. On suggestion of Lenovo, I ran hdtune pro app in my machine and it also detected 3 hard drive errors. As my machine is under warranty, Lenovo is ready to replace my hard drive with a new one. But they say that it is the responsibility of the customer to return the windows 8.1 operating system and install in the new drive and their liability is limited to the replacement of the hard disk only. I am not computer savvy and I request concerned to guide me how to deal with operating system windows 8.1 on external media like USB, DVD, and install in the new drive. I also installed a number of apps and paid games. Therefore, I would like to resume these games also files so that I need not buy again. Assistance in this regard is required.

  Hello Mohan,

  Thanks for posting your query in Microsoft Community Forum.

  I can of course understand the situation and will be happy to help with your query.

  Let me ask you;

  • You have the key product for Windows 8 or 8.1?

  You can create an installation media (DVD/USB) for Windows 8.1 and re-install when you want. However, in order to create an installation media for Windows 8.1, you need the product key. If you don't have the product key for Windows 8.1, you can not create installation media.

  You can create the installation media for Windows 8 by using the product key Windows 8 If you have. In this case, install you Windows 8 first and then go to Windows 8.1 through store.

  As far as your paid apps (purchased by store) are concerned, you should be able to install them as soon as you sign in with the same Microsoft Account where apps were purchased.

  You can see the steps indicated by Ronnie Vernon replied on 24 December2013, re - install paid apps.

  You can follow the steps below to create installation media.

  1. Run the program Windows 8.1 configuration or installation of Windows 8 (depending on the availability of the product key for the specific operating system.

  2. When you are prompted to run or save the file, choose run

  3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1 (or Windows 8).

  4. When you are prompted to install Windows 8.1 (or Windows 8), select install by creating media and then click Next.

  5. Select the type of media you want to use: either a Flash DRIVE or a DVD.

  To create a USB flash drive

  1. Click on the USB flash drive.

  2. Plug the USB key into a USB port on your PC.

  3. When you are prompted, select the USB key that you want to use, and then click Next.

     If you have files on the USB flash drive, it will remove them.

  To create a DVD

  1. Click on the ISO file , and then select the location where to save the ISO file.

  2. Insert a blank recordable DVD into your DVD drive.

  3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

  Note: Ensure that the USB or DVD key that you use has nothing else stored on it and has a sufficient free space to download the Windows 8.1 Installer: about 2.3 GB for the 64-bit version.

  You can also read the article below to create a USB stick recovery.

  Create a recovery USB disk

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Backup of images in the error message: "Windows Internet Explorer: an attempt was made to load a program with an incorrect format.

  When you try to record images to the picture library, I get the message: "" Windows Internet Explorer: an attempt was made to load a program with an incorrect format. ""  I was able to record images before now without any problem.  Thank you!

  I tried your suggestions, but none seemed to fix my problems.  I was advised to remove the picture library, and then restore that brought me success.  Thanks for having me on the right path.

• I have a new computer with operating system Windows 10. Sometimes items automatically starts searching for photos of my external hard drive to download. I don't want these pictures to include. How can I keep items the search from my computer

  I have a new computer with operating system Windows 10. How can I keep the elements search my computer for the pictures to download in elements? I want to control what is added to the elements.

  Harold8838 wrote:

  I have a new computer with operating system Windows 10. How can I keep the elements search my computer for the pictures to download in elements? I want to control what is added to the elements.

  It is in the file menu of the Organizer (watched folders).
  Don't include no matter what path if you do not want the Organizer to look for new files.

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani

• Very slow loading of pages with content flash in IE11 in networks of SBS 2008/2011

  Hello

  I have three different customers. Both of them have one with SBS 2008 and SBS 2011 with Win7 Pro 64 clients with Win7 Pro customers.

  These two environments use the default folder Redirection of installation by installing SBS.

  In all these networks, we experience recently that loading web sites with Flash (for example online newspapers) content has slowed down considerably when you use IE11 (Chrome/Firefox works fine).

  To disable Macromedia Flashplayer in IE Addons, the browser can speed up to normal again.

  I tried to reset IE, delete all temporary files and reinstalling Flash, but always without success.

  I assume that others have problems with this as well, as it happened in the three different networks for me...

  Any suggestion is appreciated.

  Update: IE11 reinstalled and the speed is high and will yet :-)