Many commands disabled in the operator interface

Similar Questions

• How to go from result of step of TS engine at the operator Interface?

  Hi, dear ALL

  I am a newbie in TestStand and I have a problem... A lot of documentation and manuals, but there is no clear answer = (could you please help me.

  Suppose we have a sequence with a step of success/failure. Now, I want to use my own operator instead of the sequence editor Interface to run my sequence. To the best of my knowledge, the TS engine will update Step.Result.Status property. I want to get this status and use it in my IO. How the engine works TS transfer the result of the step to the IO (or the sequence editor)? I read on user interface messages. TS engine automatically sends a special Message from UI?

  Thanks in advance,

  Max

  maksya wrote:
  [...] TS engine automatically sends a special Message from UI?

  Thanks in advance,

  Max

  No, there are no special UI for this Message.

  What you can do is to define your own customized for that user interface Message. Take a look on the TestStand reference manual page 3-15. You will find an array of components of step ordered by the execution. You can see that action no. 17 is the execution of the expression of the State. From that moment, the step should have its result. Therefore, you can use the step callback after engine (action no. 18) to send your Message to the custom user interface.  Another possible recall would be the recall of motor PostResultListEntry (action no. 32), which is the last point to transfer information.

  Regardless of the above info: why don't you use the SequenceView element and simply expel everything except the name of the step and the result column?

  hope this helps,

  Norbert

• View 2 reports with a performance in the operator Interface

  
  

  Paul

  The solution suggested by Nestor will work, but I think I have a simpler solution.

  1. download TestStand to show the report in text format using the existing mechanism.
  2. remove another ReportView control over your user interface. Do not connect it to one of the managers.
  3. generate your html and post report a custom UI message give the UI, the path of the html report.
  4. obtain the reference for the webBrowser control from the ReportView control using "ReportView.GetHTMLCtrl".
  5. call the Navigate method of the webBrowser control and pass it the path of the html report that you created.
  6. by clicking on the button print of the ReportView control should print the html report.

• Operator interface

  In the operator Interface Simple how would you code hard of a sequence into the window open the sequence file?

  Hi, Clint Eastwood. One way to do this is shown in the attached screenshot.  After the 'start' invoke the node, you can set down a 'OpenSequenceFile' invoke node (pass in a reference to the Application Manager) and then wire in your path to hardcode.  It is just a string constant.  You can then place down a property node "SequenceFile" (pass in a reference to the sequence of file View Manager) and wire in reference to the release of OpenSequenceFile.  This will fill the sequence files drop-down list box.

• How to disable the MATLAB command window when the Matlab Script

  Hi, is it possible to disable the MATLAB command window popup when the Matlab script? Thank you.

  Isn't fear. As soon as you close the window is closed by the ActiveX Server and your script will stop running. You can, of course, reduce by using the operating system. Under Windows, you can use the Utilities of Windows API, as provided for in one of the threads of research responses.

• is it possible to add a functional command line to the Active Desktop interface

  Name of the operating system: Microsoft Windows XP Professional
  OS version: 5.1.2600 Service Pack 3 Build 2600

  you are not sure if it did as a function of available any OS, but is it possible to get a command line as a windows active desktop?

  Hi Joshua,.

  There is no this command line to enable the Active Desktop. You may need to as mentioned in the following article.

  Microsoft Windows XP – turn on the Active Desktop interface

  Microsoft Windows XP - what is Active Desktop?

• I try to add a route using the route add command, the command response is "the requested operation requires a rise."

  I'm traying to add a route using the route add command, the command response is "the requested operation requires a rise."

  Command: route add 10.1.1.0 mask 192.168.31.3 192.168.31.33

  Whay can I do, because I had tried in many cases

  original title: route command

  In response to a previous and similar thread...

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post this question on the forum of Windows PowerShell...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• After you disable the new interface to tabs, all new documents are not open in a larger window

  Hello

  Yesterday I upgrade my Adobe 11.0.10 Adobe Acrobat Reader DC 15.010.20056 player. The tabs interface was pleasant enough, but there are still some limitations with this features, such as,.

  1 > no option to set no maximum. tabs in a single window,

  2 > tabs cannot organize, to be moved to a new window and several selected

  I want to disable the new interface to tabs via Preferences > General > open documents in the new tab in the same window (not checked), but after you turn off the new tabbed interface, all new documents open after the first document are not open in a maximized window, they always opened in a restored window.

  No matter what I do, it keeps - on the opening of the second new pdf in this one, restored windows are the things that I tried to overcome this.

  1 > right of the DC open Adobe Acrobat click in the task bar > Adobe Reader DC > right click > properties > run: enlarged - only the first document opened in maximized windows, documents later opened in the restored only, window that too seem to not work when I closed the last document in a restored window. Opening in the same window type is part of the windows operating system, it does all the time, "opens the entire application in the same way that they have been closed, either maximized/restored and the size of Windows too". Only the first one application window is open in this way, rest of the windows open is seems to be not supported by the operating system.

  2 > of this forum discussion https://forums.adobe.com/thread/435552?start=0 & tstart = 0 , I checked for the mentioned, registry keys

  HKEY_CURRENT_USER\SOFTWARE\Adobe\Acrobat Reader\DC\SDI

  the default value is - "bNullDocMaximized" = DWORD: 00000001 , "bMaximizeNextDocument" = DWORD: 00000001 and "bResizeOnOpen" = DWORD: 00000000

  Exchange only tried on the third button (the rest has been preset to required values) - "bResizeOnOpen" = dword: 00000001 - restart > no change > reset to its default value

  What to do now...?

  Thanks in advance

  Hi Gangatharran,

  Thank you for bringing this to our notice.

  We have recorded a bug for this and will share an update on the progress made in this thread.

  Kind regards
  Rave

• Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

  Greetings.

  I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

  Ideas?

  Thanks for the help.

  Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

  Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.

• Hi I have the same problem that many system disable code is 86331623 on a hp paviliondv6-6135dx

  Hi I have the same problem that many system disable code is 86331623 on an hp pavilion dv6-6135dx

  @uprecious_58

  With this code it should automatically remove it.

  REO

• Operator interface customized to display the results of the multi-threads

  Dear OR Comunity.

  Let me describe my problem:

  TestStand test should be tested in PARALLEL, I need to use the model based on the parallel Model.seq.

  The steps in a test run of all the discussions had to be followed in the operator, such Interface shown on the image below (in a VI).

  Thank you for any recommendations!

  Just to answer the same question this morning:

  http://forums.NI.com/T5/NI-TestStand/TestStand-UI-SequenceView-control-and-parallel-threads/TD-p/319...

• Problems to show the driver IVI and property loader error messages when you use a type of operator interface

  I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

  Hello, Johann,.

  I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

  concerning

  Samuel

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!

• Dell XPS 15z: "your battery is temporarily disabled. If please shut down your computer and try again when the unit is in the operating temperature"

  Hello

  last night, I was working on my laptop, I realize that my battery is low. so I put for loading... after a while, I realized that the battery is 75% charged so that I disconnect it. and my laptop turns off.

  the laptop refused more late start... therefore I reconnected it the charger and the laptop turned on with the light that displays the State of charge (white light near the intersection of the keyboard screen) starts to blink in a cycle of 5 times... 4 times orange and 1 white time... and this cycle continues until I use the laptop.

  and this message when I go to THE BATTERY option "your battery is temporarily disabled. Please shut down your computer and try again when the unit is in the operating temperature"my cell phone is outta warranty... what should I do? kindly help

  hchentanshankar,

  Welcome to the community.

  I am sorry to read that you are experiencing this issue.  The battery is likely guilty, but you should check to see if there are any problems with the laptop or AC adapter / CC before you rush out and replace the battery.

  I would start by checking the bios, boot the system by pressing F2 to enter the bios, you can also press F12 and select the bios menu.  Once in the bios look for the option for AC adapter warnings, if they are disabled they can and save the changes. If there is a problem with the adapter, you should start getting errors on the adapter.

  If the adapter seems well, disconnect the battery from the system and turn off the laptop.  Wait an hour or two and then replace the battery and restart the system and see if you continue to get the message.   If you can run the laptop on battery only to leave the battery completely and then load it again and see if the problem returns.

  I know that this may not be possible before you buy a new battery but if possible try a power adapter and the battery and see if the problem persists.  In this way, you can know if the problem follows the laptop battery or the AC adapter.

  Please let me know what you find.

  TB