Loading on a MAC for the first time
I just replaced my PC with a MAC, but can't get my Adobe software to load - I have Acrobat 9 Pro. I'm used to auto download I got with my PC so do not find ways for my Mac. None of the icons that I am trying to get anywhere in the right direction. A procedure for this would be very useful...
Hi Glassdragon,
Welcome to the community!
We cannot use a serial number for Windows on Mac also the configuration file will be different, contact our Adobe support to check the serial number and download you have. They will help you: http://www.adobe.com/support/download-install/supportinfo/
-Pierre
Tags: Adobe
Similar Questions
-
Firefox crashes while loading images for the first time after windows starts upward
every time I log on windows, Open firefox and load an image or a site with content firefox flash stops responding for 2 or 3 seconds and then returns to normal after that and everything is fine... it happens only when I open firefox for the first time after starting windows to the top...
thing I tried
Start windows and Open firefox in safe mode (does'nt fix the problem)updated 13 solved the problem...!
-
Well not much description required in this case. I was using firefox for the first time on a mac and so was trying new things with this version of firefox. Just got stuck with these separators xtra... Can't find a way to get them off of my bookmarks toolbar...
You can open the Bookmark Manager (Bookmarks > show all bookmarks) and go to the Favorites bar folder in the left pane.
You can then remove the separators in the right pane. -
a iphone 6 from June 2015, many new photos, messages etc. on it.
plugged into my mac tonight for the first time and accidentally restored to my old settings of the iphone 5.
Ive lost all my news photos, messages, etc.
They are gone forever, or is there a way I can restore back.
Thanks for your HELP Please!
# No, if you didn't have it supported up to iCloud or another computer. You cannot undo a restoration.
-
Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.
Hi akilesh.sharma18,
Please repost this in the Audio forum from the laptop to help.
-
I have cs3, cs4, cs5.1 and 5.5 currently in my macbook pro.
I have to erase those out of my system before downloading the Cloud for the first time?
These old versions will cause questions if I don't remove them?
There is no obligation to uninstall the CS version when it comes to installing the CC versions. They must not interfere with each other, while CC is known to support some Cs applications as if they are part of a subscription.
-
ICloud using photo library for the first time
I am considering switching to iCloud photo library for the first time - mainly so I'll be able to use the new functionality of memories in iOS 10. However, I have quite a large library of Photos on my Mac and I'm worried about the mistakes of synchronization, bugs and any damage my irreplaceable photos. I have a Time Machine backup, but each backup on which generally only lasts a week or so, and with a large library of errors can take some time to appear. Should I be worried? Are there precautions I need to take?
In view of all the people who use it, there are very few messages on issues. Since you have a backup, you can still recover. You can consider to get a 2nd external and make a copy of your photo library in order to have 2 backups. Depending on the size of your library, you may need to purchase additional iCloud storage as free storage space is 5 GB. With a large number of photos, it will take much time to complete the synchronization. Some people have posted their s took 2 to 4 weeks. Our respective synchronization went well and we had no problem.
-
iMac 5 k end of 2014 for the first time enable FileVault stuck Reboot
Hi all
I just got the FileVault on my iMac 5 k end of 2014 with fusion drive for the first time. It is said that a restart is required. He could not restart and stuck on the black screen. No apple logo, nothing.
Here are the steps I've tried
1 restart by holding the power button and turning it back on
2. reboot into recovery by now cmd + R Mode
3. enter in disk utility
4 did not have a first-aider for my drive of fusion
5 tried by clicking file > open or remove encryption (both selections are greyed out)
6. I tried to enter the Terminal. Typed in fdesetup disable (no command found, Ditto for sudo)
7. click on the left upper Apple logo > disc start > selected my drive > chose Unlock > typed my password > selected reboot > same, stuck.
I need help.
Thanks in advance
Hello. Please let me know if figure you it out. Your question sounds the same I am facing with my Mac mini (published earlier today). Turn on Filevault and all I get is a white screen.
-
Script not running corrextly for the first time
Hello
I have a strange problem.
Always wenn first time (after the opening of tiara), I run my script, it doesn't work for the masses. Creating a report specifically does not.
When I run the script for the second time (and each additional hour) everything works fine and correctly?
To understand:
-I'm doing some (mathemtical) analyze - still works correctly
-Load / Append ReportLayout prepared, add curves, create text objects - does not work for the first time, then it alwas works correctly
The error is, that all the curves (that should be in several Annex layouts and text objects) are added to the first sheet of report responsible (although the reportsheets have been added)
As I said, when I run the script second time (and each additional hour) everything works as it should?
Thank you
Hello
I think I solved the problem by myself.
I inserted "Call PicUpdate" between the two as an interim step, and now it works fine (even running the script first time)
Thank you all
-
Xperia Z3 of charging for the first time
So my sister bought me a Xperia Z3 about 2 days ago and it has just emptied. Are there specific times on how long should I charge my phone for the first time?
No, these new Li-ion batteries do not need any type of formatting. Simply load normally and enjoy your device.
-
Hello
I need to get the Contact image converted to string Base64 using BB 10 Webworks (blackberry.pim.contacts) I get only the contact.photos [0] .smallFilePath which returns the path to the phonebook file.
Now, I want to get the image of this path and convert it to a Base64 string.
Here's the javascript code :
var img = document.createElement ('Image');
var canvas = document.createElement ('Canvas');function getBase64Image (p) {}
img.setAttribute ("src", p);Img.width = Canvas.Width;
Canvas.height = img.height;
CTX var = canvas.getContext ("2d");
ctx.drawImage (img, 0, 0);
Return canvas.toDataURL("image/jpg");}
This means bad Base64 string of image for the first time. When I convert this string to the image it displays white screen. But returns a string in the Mithraeum and after conversion, display a correct image.
I use Blackberry Z10 (OS 10) for the test.
I think that the canvas is not drawing image properly for the first time.
I have searched and tried many things, but not got success. What will be the solution.
Thanks in advance.
My guess is that the image did not load the source completely still. Setting the src / image loading is an asynchronous event, which means that your code will continue to the next line regardless of whether the image has loaded yet or not.
After calling setAttribute instead of execute the code of the Web, you will probably need define an event on img for the load event listener. Once the image is loaded, you can then use the img with canvas variable to retrieve its data.
Note that getBase64 will return immediately, so you may need to develop some sort of mechanism to wait before returning, or the asynchronous approach and integrate reminders for the success trigger the next piece of code.
-
How to identify a webworks app launches for the first time...
I am designing my webworks app to prompt the user to accept a license agreement before using the application for the first time. If they accept that the application works as usual, if they decline the application does not load and it ends.
Is to do it in a Webworks app without the use of a store like the SD card anyway?
I don't want to use the SD card as a store because it limits the number of users who can use the app (even if these SD cards are now pretty much standard).
Does anyone have any suggestions?
EC
You can store the information using the API file on the local file system IO... You don't need to use the SD card... just a local path on the file system of the device.
-
Hi all
I'm setting up cluster for WCC (University Complutense of MADRID and IPM) environment. I moved the cs folder in a shared location (cluster env), connected to the AAU console for the first time and on the page of any given configuration him shared location of path.
The University Complutense of MADRID on node 1 server has started successfully, but not able to log in (get a 403 forbidden error)
Save file entry: -.
< 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < there is a failed to initialize at the start of the AAU. >
< 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < could not start server "server" to the URL by default relative web root "cs".
javax.servlet.ServletException: could not start a deployment of servers of IDC.
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
Truncated. check the log file full stacktrace
Caused by: java.io.IOException: Oracle WebCenter content could not initialize inside the servlet environment.
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. check the log file full stacktrace
Caused by: intradoc.common.ServiceException:! csResourceUtilsFileIOError! csResourceUtilsFileReadError, activestate.hda
at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:348)
at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:191)
at intradoc.resource.ResourceUtils.serializeDataBinder(ResourceUtils.java:64)
at intradoc.server.ActiveState.serializeData(ActiveState.java:221)
at intradoc.server.ActiveState.load(ActiveState.java:58)
Truncated. check the log file full stacktrace
Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone
at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:373)
at intradoc.serialize.DataBinderSerializer.receiveEx(DataBinderSerializer.java:550)
at intradoc.data.DataSerializeUtils.receiveEx(DataSerializeUtils.java:87)
at intradoc.data.DataBinder.receiveEx(DataBinder.java:2080)
at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:327)
Truncated. check the log file full stacktrace
Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone
at intradoc.common.IdcDateFormat.optimizeFormat(IdcDateFormat.java:692)
at intradoc.common.IdcDateFormat.initEx(IdcDateFormat.java:291)
at intradoc.common.IdcDateFormat.initWithDefaultTimezone(IdcDateFormat.java:187)
at intradoc.common.IdcDateFormat.init(IdcDateFormat.java:151)
at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:364)
Truncated. check the log file stacktrac full
Help, please.
Kind regards
Vipul
Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone
Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone
Have what version of the WCC you installed?
Do you have any specific time format located in ucm config.cfg? If so, then comment out him, and then start the server.
You have the time zone set to GMT0? This can be checked from the activestate.hda file.
Try the following solution to replace the zone on all had file on
/ucm/cs Perl-e ' s/tGMT0/report/g;' -pi.save $(trouver
/ucm/cs-type f) -
Always incompatible error when using the app for the first time
We get the following error every once in a while when you realize an IISReset and newspaper, GSM or SCRM or NDP (have not tested the other apps) for the first time. The only recovery of this seems to be to make an another IISReset and try again keep doing so until the stop occurring. Does anyone else have this problem?
Exceptions: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ApplicationException: could analyze not String Boolean value: "${UserInRole:CP_SYSTEM_ADMIN} '-> System.FormatException: string was not recognized as a valid Boolean value.
at System.Boolean.Parse (String value)
at Xeno.Web.UI.NavigationControls.Builder.Helper.AttributeSetter.ParseBooleanValue (String attributeValue)
-End of the exception stack trace internal-
at Xeno.Web.UI.NavigationControls.Builder.Helper.AttributeSetter.ParseBooleanValue (String attributeValue)
at Xeno.Web.UI.NavigationControls.Builder.Helper.AttributeSetter.SetAttributeValue (String attributeName, attributeValue, menuObj, Boolean isIgnore Object String)
Xeno.Web.UI.NavigationControls.Builder.YApplicationMenuBuilder.BuildMenuItem (model IMenuModel, BaseMenu menuToBuild)
Xeno.Web.UI.NavigationControls.Builder.YApplicationMenuBuilder.BuildMenuItem (model IMenuModel, BaseMenu menuToBuild)
Xeno.Web.UI.NavigationControls.Builder.YApplicationMenuBuilder.BuildMenuItem (model IMenuModel, BaseMenu menuToBuild)
Xeno.Web.UI.NavigationControls.Builder.YApplicationMenuBuilder.Build (model IMenuModel)
to Xeno.Web.UI.NavigationControls.NavigationControlContainer.OnInit (ByVal e As EventArgs)
Oracle support should be able to provide a help file, AssembliesPage.aspx, that you can place in your WebCommon directory. When you then navigate to this page in the URL, it will try to load all the dll dependent and relevant. If one of the required DLL is not found, it should give you a message at the bottom of the page showing you what dll (if any) was absent. It is the most common cause associated with this type of error reported. If you add the missing dll, dealing with the issue.
You can access the support page by typing the address bar something like the following:
https:///gsm/WebCommon/AssembliesPage.aspx
This assumes that you have placed the page in the directory web\WebCommon- - - -
Kind regardsRon
-
Photos published in the catalog when LR is opened for the first time...
Hello everyone...
As you can see... I'm a first time user Macbook Pro and LR as well.
When you open LR for the first time, apparently, that it has imported about 120 photos, in itself, without getting the "All Files" from the Mac folder.
Any ideas how it happened, or maybe I have something 'turned on' in the preferences that this in itself... something that I don't want it to do of course.
The thoughts and ideas are welcome.
Thanks in advance,
CJ
sure...
Here are the tutorials that you can refer to begin to import:
How to transfer photos to a folder on the hard drive to Photoshop Lightroom
How to transfer pictures from a camera or card reader to Photoshop Lightroom
Maybe you are looking for
-
Re: Display problems on Qosmio X 770 - 13F
Hello Recently on my computer, I have problems with my screen. After a blue screen, my computer has a lot more time than normal light (about 20 min to reach the office). When I play my games online, I have a lot of 'freeze', for example League legend
-
Error code 1073807346 visa.
I'm contacting a digital wattmeter of Yokogawa WT210. My LabVIEW application test works very well initially, getting data from this instrument, but ONLY errors after exactly 4 loops. My program contains two frames. I connect the resource (GPIB::5)
-
When I click on a link in my email, I get the floowoing error message: this operation has been cancelled due to restrictions in effect on this computer. What should I change?
-
Problem of saturation with 741 models
Whenever I saturate a 741 op-amp by exceeding the limit of his positive supply voltage, the output saturates at the negative supply voltage. For example, if I build a voltage follower with +/-15 V supplies and an entry of + 20 V, the output is (appro
-
Impossible to reconnect the VPN to ASA on the internet
Hello I ASA5540 running IOS 8.04 - K8, users are able to the VPN connection over the internet but impossible to reconnect the VPN when users disconnected abnormally (abnormally means they are not manually disconnect, VPN disconnect everything manuall