loading photo to DVD files, have I/o device error:-code 0x800745D

Similar Questions

• Error: operating system could not be loaded because a required file is missing or contains errors. Error code: 0oxc0000185

  Hello my dear,

  I need your help if you can as soon as possible.

  My problem was unexpected, when I turned on my laptop computer and received the following message:

  "Your pc needs to be repaired the application ot operating system could not be loaded because a required file is missing or contains errors.

  File: \Windows\system32\winload. EFI

  Error code: 0oxc0000185

  You will need to use tools of recovery on your installation media. »

  Here some useful information can by important for you:

  * my laptop is dell inspiron 15R.

  Operating system is windows 8.

  * windows has been installed on the laptop (by the company) and I DID NOT CHANGE IT.

  * I don't have a windows CD.

  * The problem occurs the first time.

  I am ready to give all forgotten information.

  Help, please.

  Thank you very much.

  Original title: recovery

  Companies who pre-install Windows on your computer usually have a generally accessible, integrated conservation program by rebooting and press a special recovery as F2, delete, or escape.

  You want to contact Dell or refer to the manual of your laptop to find out how to start the repair process.

  You can go to http://support.dell.com to discuss with their technical support directly too.

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• Windows Media Player Vista when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1

  I presume that I have windows media version 11 of the drive and when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1. My attempts appear so far have confirmed that I have the latest updates available for my drive, and after you run the fix it program tell me no error or problems when identified. Appreciate any help that can be offered

  Hi at Rob Merci for the quick reply, but before that I followed one of your suggestions I confirm the error message I get when trying to play some movies is certainly cood11d1 so your thoughts before going further with thank you bob.

  ==========================================

  Followign links may be worth a visit:

  (935336) Windows Media Player 11 cannot
  read content protected by DRM on Windows Vista
  http://support.Microsoft.com/kb/935336

  (925705) when you try to use Windows Media
  Player 11 to play a digital rights management
  (DRM) - protected media file media cannot play
  http://support.Microsoft.com/kb/925705

  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Windows Media Player: Mini WMP FAQ
  http://zachd.com/PSS/PSS.html
  (scroll down a bit to the 3rd entry that said: Vista only)

  Windows Media Player error c00d11b1 resolved
  http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
  (it's a long discussion on the error 0XC00D11B1)

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• I'm trying to backup to an external drive my contact Outlook .pst files. I get an error code 80070021 Ox who says that the files are either locked by another program

  original title: error 0 x 80070021

  I'm trying to backup to an external drive my contact Outlook .pst files. I get an error code

  Beef 80070021 which says that the files are either locked by another program. I just put all these contacts on iPhone.  What should I do to fix this?

  This problem is caused by a MS Outlook Add In which prevents closing Outlook. Add in that is usually responsible for cauysing this problem is one that search/indexing of the tool. The remedy is very simple:

  (i) with Outlook open, go to Tools Menu
  (ii) click on "Trust Center".
  (iii) in the left pane, choose Add-Inns, and then near the lower part of the window, you will see a button that allows you to manage your COM Add-Ins.
  "(iv) to ensure that the drop-down list is set to ' COM Add-Ins" and then click on OK
  (v) select Windows 'Search Email an indexer' and then click 'remove '.
  (vi) click OK, and then close Outlook.
  (vii) re - open Outlook and run the backup. (The program will tell you that Outlook must close the first before saving). Everything should be OK.
  If any problem contact me at * address email is removed from the privacy *.
  I hope this helps.

• The inDesign CS5.5 start niet meer. Error: The file is damaged "InDesign SavedData" (error code: 6).

  Some good dagen Sinds we Indesign CS5.5 niet meer starten. We will merge: the file is damaged "InDesign SavedData" (error code: 6). Wie kan mij helpen?

  Problem solved by renaming the folder SavedData. He created autmaitcally one again and error message missing.

• File is missing or damaged, error code

  I have Vista Home Premium. I get an error code when I try to open some applications, saying that I have missing or corrupt fonts. How can I configure fonts for the default settings for this problem?

  Hi MarcyHodgman,

   

  1. What is the exact error message you get?
  2. what applications are faced with?
  3. Since when are you facing this problem?

   

  You can perform a SFC scan and check if it lists any problems.
  To Perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

  I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

  "Recovery".
  Your PC needs to be repaired
  File: \Windows\system32\winload.exe
  Error code: 0xc000000e
  You will need to use the tools of recovery on your installation media, etc...

  Press Enter to try again

  Press F8 for startup parameters

  Press F9 to use another operating system.

  It allows me to boot from another HD after pressing F9 several times.

  Any advice would be appreciated.

  Kind regards

  Anthony

  I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
   
  Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

  Choose your language. Click next
  You will now see install in the center of your screen. On the lower left side you can see fix your computer.
  Choose repair.

  You will have several options, including:
  Refresh your computer
  Restore your computer
  Advanced options

  Choose Advanced Options.
  Launch the command prompt
  Enter the following commands one at a time who hit enter after each command.
  Bootrec /scanos
  Bootrec /rebuildbcd
  Bootrec /fixmbr
  Bootrec /fixboot
  Restart the computer once the last command finished

• Drive CD/DVD on laptop Satellite L problem - error Code 39 code

  Hello

  Could someone tell me if there is a updated for the TSSTcorp CDDVDW TS-L632H ATA Device driver? The device is not available as a selectable drive and in Device Manager it reports the following error:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I removed the device and the driver, but on the hardware analysis; Vista re - install the default driver and returns the same error.

  Because of this error, I can't update the firmware of the player and the update of the firmware can not see the drive.

  Any ideas?

  Thanks in advance.

  Hey Buddy

  What to say about this problem is known and caused by bad Windows registry entries.
  Microsoft has published and published items of knowledge.

  Check this box:
  http://support.Microsoft.com/kb/270008/en-us

  I recommend first of all remove the reader of CD/DVD from the list of devices in Device Manager. Then, completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, restart the laptop.

  All that s.

  PS: you will find this solution also without my help. You must use the search function of the forum! It s useful!

• my recovery disk is full. but it's when I try to compress the files. It shows an error code

  have a Pavilion dv6000 with windows operating system 7. my recovery disk is full. but it's when I try to compress the files. It shows a

  800A01A8 error code that pertains to my web cam / error:

  Required object; Error running Microsoft JScript source

  line 315

  2 tank

  The recovery partition is set by default to have very little free space_and has no negative effect on it or system. However, if you use it to back up files, it could fill to capacity. Do not use for backup. You can also check to see if the System Restore monitors the partition, if so, turn it off. Whatever you do, do not compress the partition. Doing so will serve as recovery to stop working.

• I can't open windows photo gallery, when I try, I get "0x8007045a error code.

  When I try to open Photo Gallery, a small window appears containing the word 'ok' and nothing else.  I used photos before and I still have the icon on my desktop, but the shortcut does not open the application.  All I get is "0x8007045a error code" - cannot open no matter what I try.

  Hello DCraneJr,

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to Windows Live Photo Gallery and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=20

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• I have the same problem, error code 0 x 80070002

  MY question is what do I do? I don't have windows vista, I have windows Xp media center edition? What steps to follow to address this situation. My windows shows me I have updates, but it does not install updates

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  If this did not help:
  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site
  http://support.Microsoft.com/kb/910337
  Windows could not start the service on the local computer's Background Intelligent Transfer. For more information, see the system event log. If it is a non-Microsoft contact service provider service and refer to the service special-2147024894 error code. (0 x 80070002)
  Error: Path not found (0 x 80070003)

  TaurArian [MVP] 2005-2010 - Update Services

• Someone knows how to fix a corrupted file mib.cab? 2350 error code? The result of the installation failed for Mindstorms NXT 2.0 on computer vista laptop, service pack 2.

  Tried to install the Lego NXT 2.0 software (programming robotics), a message "file 'mib.cab' required for this installation is corrupt and cannot be used.  A message gives the error code 2350.  Someone knows how to fix a corrupted file mib.cab?

  Try in the Forum of programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• I'm unable to load photo or movie files. the save option does not appear as a choice

  It seems that my down load is off.

  Try to go to Google Images / get an object / open a full
  photo size and see if you can right-click / Save the image under.
  http://www.Google.com/imghp

  Also, you might try... right click / copy. Then right click on your desktop
  and choose Paste.

  Number of video files (clips from youtube for example) requires a special software
  to download.

  The following free Downloader is just an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Video Downloader
  http://www.Freemake.com/free_video_downloader/
  (Windows XP/Vista/7)