Loading (without rules file) crashes on EAS on the loading data in the exported file.

Similar Questions

• Issue while loading data using the file Rules Essbase

  Hi all

  I am facing problem while loading data using the Rules file. In the rules file, I rejected several members in two areas (two dimensions). Now if I load the data using the rules file I'm getting errors for all members in the dataload.err file. If I reject mutiple members of a single field, the data load without settling errors in the dataload.err file.

  I want to know how rmany members of several fields of ejection for loading data using the file Rules Essbase? Is it possible?

  Okay, okay... I think that you must assign Global Select / reject Boolean in the parameters of loading data as 'Or':

  

• Unable to load data using the rules file

  Hi all

  I am facing a strange problem while loading data by using a rules file:

  1. I don't get any error/kick. It gives fair attention No. data values are modified by this data file loading. But nothing will load inside.

  2. I tried with Maxl and directly from EAS but gettting same warning.

  3 has tried to block sending n to entires in the data file and it does not work (so no Dynamics members etc..)

  4. rule file validates correctly.

  5. I tried with different types of different files (Csv, Xls, Txt, etc.) but no luck.

  Any suggestions / ideas of what could be bad?

  Don't know what exactly was the problem, but I recreated the rule files and it solved the problem... May be a case of corrupted file rule?

• Is it possible: Loading SQL with generic rule file?

  Hello
  When you load a flat file into Essbase, can be defined in the header of the data load domain names. In the load data, dimension names given and at the end of the data. In the file rule under Options > properties of data source > header reference could be made to this line. It works very well.
  
  We want to load the data with SQL in the same way. A load rule with a variable substitution for the selection view and we can use it for every load of data. We specified the name of dimension in the table column header. The data column has been defined as 'data' - without the quotes.
  
  The result is so far, it does not load.
  The question is - did someone tried this before and can help me on this?
  
  Thanks in advance.
  
  Kind regards
  Philip Hulsebosch
  www.trexco.nl

  the data column can be repersented in several ways, as I do usually is to set for the Member, it belongs to. In my example where your variable substitution & currmth is "Jan" then "Jan" would be the name of the column. The next month when the var void changes to Feb, on Feb.

• Error loading data with a rule in 11.1.2.1 file loading

  When I do the dim the Parent child build and alias will not load?
  
  Rule reading information SQL for the database [DP]
  Rule of reading of the purpose of the database rule [DP]
  Active parallel loading: [1] block to prepare the discussions, block [1] write discussions.
  DATAERRORLIMIT reached [1000]. Rejected records will be is more connected
  No value data modified by this data file loading
  Data load time for [Accounts01.txt] with [ACCOUNT.rul]: [0.512] seconds
  There were errors, look in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\client\dataload.err
  Completed import data ['RPIWORK'.'] [DP ']
  Out of the prepared columns: [0]
  
  Outline = measurement Demension
  
  Measure
  Balance sheet
  Profit & loss
  
  Data file
  
  is a SQL query
  to Excel and save it as a text (delimited by tabs)
  
  Account.txt
  
  Parent | Child | Alias
  Total assets of the balance sheet 10000
  Total liabilities of the balance sheet 20000
  Balance Sheet Total 30000 of the owner
  Profit & loss 40000 recipes
  Profit & loss 50000 cost of goods sold
  Profits & losses 60000 S.G./A.
  Profit & loss 70000 other operating income
  Profit & loss 80000 other expenses
  Profit & loss 85000 interest income/expenses
  Profit & loss 90000 taxes
  Profit & loss 99000 capitalized Contra
  10000 10100 short-term assets
  10000-14000 «wood, forest and roads land»
  10000 17000 "goods, materials and equipment.
  10000 to 19000 active other long-term
  10000 19750 deferred tax assets
  20000 20001 short-term liabilities
  20000 21200 other Long term liabilities
  20000-22000 timber contracts
  20000 25100 long-term debt
  20000-26000 deferred tax liability
  30000 Equity subsidiary 30001
  30000 30250 voting common shares
  30000 30350 according to Common Stock
  30000 30450 capital paid in additional
  30000 30550 retained earnings
  30000 30610 other comprehensive income items
  30000 30675 tax distribution to Shareholde
  40000 40055 wholesales
  40000 41500 chips recipes
  40000 43000 power sales
  40000 nursery 45000 income
  40000 46000 transfer logs
  40000 47000 Intraco sales
  40000-49000 sale deduction
  50000 Labor 51000
  50000 52000 raw
  50000 rental 52800
  50000 53000 operating expenses
  50000 53900 forestry supplies
  50000 capitalized 53999 Contra-forestry
  50000 maintenance 54000
  50000 55000 fuels & lubricants
  50000-56000 utilities
  50000 57000 cost of direct registration
  50000 57500 personalized services
  50000 impoverishment 57700
  50000 58000 cost allocations of goods sold
  fixed cost 50000 59000
  50000 59510 changes in inventories
  60000 60100 salaries
  60000 60300 maintenance of PC hardware
  60000 60400 other G & A
  61000 60000 licenses/fees/charges
  60000 61400 benefits not
  60000 61550 furniture/fixtures
  60000 legal 61750
  60000 62000 fresh office
  60000 62500 professional services
  60000 63000 activities pre & Post jobs
  60000 63200 telecommunication costs
  60000 63550 employee activities
  60000 63800 sales & Promotions
  60000 63900 banking questions
  60000 64000 Admin depreciation
  60000 64500 insurance and property taxes
  60000 65000 allowances S G & A
  60000 66000 outside management
  70000 70100 rental income
  70000 disposals of fixed assets 70200
  70000 70400 Misc income
  80000 80200 factory inactive
  85000 85001 interest expense
  85000 85200 interest income
  90000-90100 income tax charges
  
  error file
  
  ------20000 not found in the database members
  20000 25100 long-term debt
  
  ------20000 not found in the database members
  20000-26000 deferred tax liability
  
  ------Member 30000 not found in the database
  30000 Equity subsidiary 30001
  
  ------Member 30000 not found in the database
  30000 30250 voting common shares
  
  ------Member 30000 not found in the database
  30000 30350 according to Common Stock
  
  ------Member 30000 not found in the database
  30000 30450 capital paid in additional
  
  ------Member 30000 not found in the database
  30000 30550 retained earnings
  
  ------Member 30000 not found in the database
  30000 30610 other comprehensive income items
  
  ------Member 30000 not found in the database
  30000 30675 tax distribution to Shareholde
  
  ------Member 40000 not found in the database
  40000 40055 wholesales
  
  ------Member 40000 not found in the database
  40000 41500 chips recipes
  
  ------Member 40000 not found in the database
  40000 43000 power sales
  
  ------Member 40000 not found in the database
  40000 nursery 45000 income
  
  ------Member 40000 not found in the database
  40000 46000 transfer logs
  
  ------Member 40000 not found in the database
  40000 47000 Intraco sales
  
  ------Member 40000 not found in the database
  40000-49000 sale deduction
  
  ------Member 50000 not found in the database
  50000 Labor 51000
  
  ------Member 50000 not found in the database
  50000 52000 raw
  
  ------Member 50000 not found in the database
  50000 rental 52800
  
  ------Member 50000 not found in the database
  50000 53000 operating expenses
  
  ------Member 50000 not found in the database
  50000 53900 forestry supplies
  
  ------Member 50000 not found in the database
  50000 capitalized 53999 Contra-forestry
  
  ------Member 50000 not found in the database
  50000 maintenance 54000
  
  ------Member 50000 not found in the database
  50000 55000 fuels & lubricants
  
  ------Member 50000 not found in the database
  50000-56000 utilities
  
  ------Member 50000 not found in the database
  50000 57000 cost of direct registration
  
  ------Member 50000 not found in the database
  50000 57500 personalized services
  
  ------Member 50000 not found in the database
  50000 impoverishment 57700
  
  ------Member 50000 not found in the database
  50000 58000 cost allocations of goods sold
  
  ------Member 50000 not found in the database
  fixed cost 50000 59000
  
  ------Member 50000 not found in the database
  50000 59510 changes in inventories
  
  ------Member 60000 not found in the database
  60000 60100 salaries
  
  ------Member 60000 not found in the database
  60000 60300 maintenance of PC hardware
  
  ------Member 60000 not found in the database
  60000 60400 other G & A
  
  ------Member 60000 not found in the database
  61000 60000 licenses/fees/charges
  
  ------Member 60000 not found in the database
  60000 61400 benefits not
  
  ------Member 60000 not found in the database
  60000 61550 furniture/fixtures
  
  ------Member 60000 not found in the database
  60000 legal 61750
  
  ------Member 60000 not found in the database
  60000 62000 fresh office
  
  ------Member 60000 not found in the database
  60000 62500 professional services
  
  ------Member 60000 not found in the database
  60000 63000 activities pre & Post jobs
  
  ------Member 60000 not found in the database
  60000 63200 telecommunication costs
  
  ------Member 60000 not found in the database
  60000 63550 employee activities
  
  ------Member 60000 not found in the database
  60000 63800 sales & Promotions
  
  ------Member 60000 not found in the database
  60000 63900 banking questions
  
  ------Member 60000 not found in the database
  60000 64000 Admin depreciation
  
  ------Member 60000 not found in the database
  60000 64500 insurance and property taxes
  
  ------Member 60000 not found in the database
  60000 65000 allowances S G & A
  
  ------Member 60000 not found in the database
  60000 66000 outside management
  
  ------Member 70000 not found in the database
  70000 70100 rental income
  
  ------Member 70000 not found in the database
  70000 disposals of fixed assets 70200
  
  ------Member 70000 not found in the database
  70000 70400 Misc income
  
  ------Member 80000 not found in the database
  80000 80200 factory inactive
  
  ------Member 85000 not found in the database
  85000 85001 interest expense
  
  ------Member 85000 not found in the database
  85000 85200 interest income
  
  ------Member 90000 N
  t database
  90000-90100 income tax charges
  
  
  That's how I build my loading rules file
  
  Create-> rules file
  File-> opendatafile->
  
  account01.txt
  
  Field-> Dimension Build Properties properties
  
  Dimension =
  Field 1 measure; Type = Parent
  Measurement of field 2; Type = child
  Measurement of field 2; Type = Alais
  
  Click the Dimension Build field
  Click on setting Dimension build - Parent\Child
  Ok
  
  Validate - rule is correct
  
  Save as account
  
  Load the data file = Acciount.txt
  Rule file = account
  
  Ok
  
  Published by: level following December 11, 2011 06:24
  
  Published by: level following December 11, 2011 06:25
  
  Published by: level following December 11, 2011 06:27

  The drop-down list in the EA when you right click on the database and select load data. I have a question, the Member that already in outline? If this isn't the case, you will have problems. You would have to add it or have a line in the file to load at the top, with something like account, balance sheet in it. Also in the State of charge have you changed the load parameters of dimension for the dimension of accounts to be parent/child for the dimension of accounts. Often enough, the people don't realize they have to double-click the dimension name to make sure it gets set as the dimension that gets changed.

  I'm sure that your question is she trying to make loading the data and not the generation dim, but it might just be the first problem

• Cannot load a rules file in my application of HFM

  I've updated a rules file in my QA environment and I could load it without any errors in the application of IFRSQA.
  
  After I tried to update my HFM application in the Dev Environment by loading the same rule file in the application of IFRSDEV, but it returns an error. The two applications are the same except for the rules file. It returns the error:
  
  Processing load file...
  Analysis of the rules of Calc...
  
  
  
  An error has occurred.
  Error: 800456 8
  
  
  Journal:
  --------------------------------------------------------------------------------
  Load started: 11:43:56
  Number of errors: 1
  Number of warnings: 0
  
  
  {D29035D0-EE9D-4C5F-8C26-BADDFD225157}1-214721419306/22/2010 11:43:56 AMLCLVWHQX40CHsvCalculate.cpp18049.3.1.0.2385
  Charge ended at: 11:43:56
  Duration: 00:00:00
  
  I went to the HFM error log viewer and I saw this:
  
  {D29035D0-EE9D-4C5F-8C26-BADDFD225157}
  Summary of Message System
  Engine script VB could not be initialized
  
  Any clue?

  I don't know exactly what it is, but it could be related to rules that runs automatically when loading:

  Secondary entrance
  Void NoInput

  And I think (but I am not sure):
  Public constants or variables

  Comment on these sections and re-load.

  Are there errors preceding this one, as it is a secondary error?

  -Chris

• Load data into Essbase using the rules file

  Hello
  
  IAM trying to create a rule to load for the fresh Essbase cube associated with the Hyperion Planning Application.We having 14 Dimensions (including the HSP_Rates Dimension).
  
  The falt file used to generate the rule file has columns related to the 13 dimensions as well as the data as the 14th column column. When I validate the rules file, he said "the rules file is correct for the loading of the data.
  
  My concern here is iam not taking care of Member Dimnesion related to the Dimension of "HSP_Rates" (not even as the Difinition of the header). I'm doing something wrong here? How validation can MOVE independently without taking into account one dimension?
  
  If I insert the data, while recovering the data in Excel which dimension member HSP_Rates should I use?
  
  Any response is greatly appreciated.
  
  Thank you
  RNG

  Hello

  You should charge against 'HSP_InputValue' in the HSP_Rates dimension, i.e. where the input values must be loaded.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Ask about the load of metadata in Essbase using the rules file

  Hello

  In our application, we load the metadata using the Essbase rules file and here, we are faced with a problem. Suppose we have load a member of level 0, called "xxxx" under two different parent, assume parents are Parent_AAAA and Parent_BBBB. But our demand is the operator of consolidation for the first occurrence (i.e. under the Parent_AAAA) is '+' and for the Member shared under Parent_BBBB is ' - '. But, when we are load using rule file the operator of consolidation for the Member always shared loading as ' + '. Y at - it a trick to change the operator of consolidation for other than manually changing outline shared member?

  Pls help... Thanks in advance.

  I don't think that there is a way to change the default setting.

  However, what you can do is to have a different charge and rule file different text with only the metadata that you want to have an exception for shared members. In this way, you can get that you don't have to change existing rules file.

  Concerning

  ORACLE | Essbase

• Loading data to Essbase with ODI rules file

  Hi all
  
  I need to load the flat file DATA (no metadata) or an Oracle table in to ESSBASE using ODI.
  
  Where can I find an example or a tutorial on the loading procedure.
  I have not have how to use ODI with a rules file:
  
  (1) in the standard rule file I can insert a transformation (join, split ecc.) can be used
  a rule like this in ODI file?
  
  (2) if I put the file of IKM SQL for Hyperion Essbase (DATA) rules I have to manually set the mapping
  between the source and target? the mapping is not set in the rule file?
  
  (3) can I use both the type of rules (flat file or SQL) file?
  
  
  Thanks a lot for your help!
  
  Edited by: 882454 on 19-game-2011 2.57
  
  Edited by: 882454 on 2.58 19-game-2011

  If you go to the next page in my blog, you should see a link to all the different posts around ODI and hyperion knowledge modules - http://john-goodwin.blogspot.com/2011/08/odi-series-summary.html

  In ODI, you can do all the transformations, the rule of the load is really used to optimize the process of loading the data.
  You must configure your interface with source and target mapping, and then create a rule to load that corresponds to the mapping of the target.
  You can use any type of source.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ODI vs rule file load

  Hi all
  
  I would like to know the difference between the loading data to essbase directly using files of rules from a flat file or an RDBMS and load using ODI.
  And using rule files in interface ODI to load the data, what kind of performance and efficiency can be achieved with it.
  
  Thank you

  The choice is really yours, I'm not sure you how many performance advantage you would see ODI not use with a rule of load, sometimes it is just better to test and see.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to load data from ms sql to the by the file rules and maxl essbase

  Hi, everybody!
  Pretty Shure the kind of topic exists already on the forum, but unfortunately can't find it.
  
  I want to understand, how to load data from the database to ms sql for the PB of essbase application.
  
  (I) so I have:
  1. a request for 'society '.
  2 and its database 'Plan '.
  3. with simple outline, which contains only two dimensions:
  
  -The time period < 1 > (Label only)
  -Total year (~)
  -Qtr1 (+)
  Jan (+)
  Feb (+)
  Mar (+)
  -Qtr2 (+)
  APR (+)
  May (+)
  Jun (+)
  
  -Accounts < 1 > (Label only)
  -Lost / based (~) (Label only)
  -Revenues (+)
  L1.1 (+)
  L1.2 (+)
  -Costs (-)
  L2.1 (+)
  L2.2 (+)
  
  (II) also, I created a rules file called "CO_DWH" and associated with this schema
  It (Rules file) a 3 columns:
  Data of the 'period', 'account '.
  
  There is also the option checked "load data".
  
  (III) in MS SQL Server, I have a database of "hypdb" and "essadmin" with "password" login
  
  (IV) I executed my bat file:
  C:\Hyperion\EssLoad.bat
  There is only one line:
  
  EssLoad.bat-
  startMaxl.cmd EssLoad.txt
  ----------------------------------------------
  
  EssLoad.txt-
  login password admin on erpserver;
  Import database data Company.Plan connect in essadmin password using the server rules_file 'CO_DWH' error abort;
  disconnection;
  "exit";
  --------------------------------------------
  
  
  All plans that I copied well worked ERP system, but I don't understand, this is exactly table in the MS SQL database, data loading to essbase db?

  TOU have to do a few things
  1. on the server of Essbase, put in place a system odbc for your MySQL database connection
  2. in the State of charge, go to the file menu and select open source SQL database and in the source of data in your SQL statement. A few tips. Where it says select, don't put in the select Word and when he says to not put in of. The system adds for you. TI enter a simple SQL statement is to do this in the box so select if your SQL would be normanlly as select * from myTable just enter the code as * from myTable in the upscale neighborhood

  The ol/recover the click and fill your connection information. Should bring back the data in the State of charge. Save the State of charge and use

• Error while loading data file with using a file of rules through a MAXL.

  I think that the functionality to generate a. Records error during loading data in the ERR file is supported only if there is a. RUL file being used.
  
  Is this good?
  
  I tried to get. ERR files to generate by using the following statement:
  Import database PL_RPT. Reprting data data_file
  "E:\Hyperion\AnalyticServices\APP\PL\PL.txt" to load_buffer with buffer_id 17
  Error writing to "E:\Hyperion\Scripts\Pln\Logs\LoadlData.err."
  
  When I run this, if there are errors, it is not generated any file errors and stops the load.
  
  I saw the technical reference Essbase ASO MAXL data loading and code syntax diagram indicates that it is supported.
  
  Any suggestions will be greatly appreciated.
  
  Thank you

  Hello

  Here are a few suggestions for trapping errors. I hope that one of them will meet your needs:

  1._____________________________________________

  spool to 'D:\logs\maxlresults.out ';

  function SIERREUR 'WRITE_ERRORS ';

  / * do stuff * /.

  Define the label 'WRITE_ERRORS ';
  spool off;
  spool to 'D:\logs\maxlerrors.out ';
  "exit";

  2._____________________________________________

  coil stdout to "D:\logs\maxlresults.out."
  coil stderr to "D:\logs\maxlerrors.out."

  3._____________________________________________

  essmsh script.msh 2 > D:\logs\maxlresults.out

  Robb

• Need data files and rules file to create and load data for sample.basi

  I need emergency data files to build dimensions dynamically and also the rule files for loading data to the application Sample.Basic for Essbase 9. Kindly let me know if anyone can provide them. Otherwise any link frm where I can get it?
  
  Thanks in advance.

  Outline and all the data (calcdat.txt) are included in the zip, so you don't need to rebuild something with the loading rules

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• loading data to essbase using EAS against back-end script

  Good afternoon

  We have noticed recently that when loading of our ASO cube (with the help of back-end scripts - esscmd etc.) it seems to load much more overhead then when using EAS and loading files of data individually.  When loading using scripts, the total size of the cube has been 1.2 gig.  When you load the files individually to EAS, the size of the cube has been 800 meg.  Why the difference?  is there anything we can do in scripts supported to reduce this burden?

  Thank you

  You are really using EssCmd to load the ASO cubes?  You should use MAxL with buffers to load. Default EAS uses a buffer to load when you load multiple files. Esscmd (and without the command buffer MAxL) won't. It means loads long and larger files. Loading ASO, it takes the existing .dat file and adds the new data. When you are not using a buffer load, it takes the .dat file and the .tmp file and merges together, then when you do the second file, it takes the files .dat (which includes the first load data) and repeats the process. Whenever he does that he has to move together (twice) .dat file and there is growth of the .dat files. If nothing else I'll call it fragmentation, but I don't think it's as simple as that. I think it's just the way the data is stored. When you use a buffer and no slices, he need only do this once.

• EAS load data and contour review

  Dear all,
  
  I am currently using Hyperion planning 11.1.2.2, I created an application with appropriate (see below) outline
  
  HSP_Rates/account/period/year/scenario/Version/currency/entity/brand/product/customer/measure
  
  and created the corresponding tables in essbase I want to load the data via Eas, I created a file to load data (a table) with exactly the same column names as my plan dimensions names EXCEPT HSP_Rates which is absent in my data file. I'm sure all the dimension members are correct / exist and there is no empty fields.
  
  When loading the file, the following error message appears:
  Value data [2056] met before that all selected Dimensions, complete Records [2]
  Unexpected error Essbase 1003007
  
  Question: I need to add a column named HSP_Rates in my data file? should what value I put under this column?
  
  
  PS: workload data file is an Excel file
  
  Thanks in advance for your help.
  Best regards.

  the problem is resolved:

  Load data into Essbase using the rules file

  the answer is Yes, create a column named HSP_Rates with 'HSP_InputValue' as values in the data file.

  Thank you
  you