loadMovieNum - question seeks to loading MC

Similar Questions

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• Questions of traction load

  I have a 2 transistor die in a single package as shown below

  

  I have 2 questions:

  1. How do you Load Pull in MWO under a constant output power? I am using the CONSTPOUT in MWO but do not know if it works. I plan just to do this on a transistor die single step and only ground the other transistor.

  2. is it possible to achieve the loadpull using 2 simultaneous Tuners to the output using standard variables in the MAG and ANG for both tuners, or is it possible to have two tuners to support with the same ID?

  

  See 1 above: are you sure of your amplifier may reach the level of output power wished all termination impedances in the sweep of loadpull?

• Assets in question to _system loading pages

  Hi, I do not know if it is a question or if I'm doing something wrong. Load images for my site system pages: worldwide success

  

  Your help is appreciated!

  Diego.

  Hi Diego

  Reference to the image file is bad, check this screenshot

  

  I have changed the... / images/image and it solved the problem.

  You can try and let me know if it works.

• LoadMovieNum question

  I have a home.swf which is inside home.html

  inside the home.swf, there is a btn by the following

  cinema_btn.onRelease = function() {}
  loadMovieNum ("video_main.swf", 0);

  inside the video_main.swf is as follows

  loadMovieNum("video1/reels.swf",1);

  the idea is to load reels.swf into level1 at the top of the video_main.swf at level 0

  No idea why reels.swf size seems to be much larger, even if all the SWFs are 900 x 800?

  I tried the following.

  remove the loadMovieNum("video1/reels.swf",1); of video_main.swf

  and re load without adding swf level1

  and the result is video_main is the same size as home.swf (so level 0 is fine)

  then I went to loadMovieNum("video1/reels.swf",1); another SWF. (video2/rbkrenn.swf", 1" ")

  The result is that this swf appears longer as well as level 1.

  Here is the help url

  http://erikshirai.com/ralphd/home.html

  I think it is good to use loadMovie instead of loadMovieNum

  Is it not?

• HP Envy X 2 (15-C001dx): HP Envy X 2 (15-C001dx): question seeks to use the external monitor

  I have a brand new HP Envy X 2 (15-C001dx) with Windows 8.1. So far, it works fine by itself. I tried to connect an external monitor to the laptop using an HDMI cable from the laptop to a LG L246WPQ screen. The problem is that 10-15% of the left side of the content portable screen does not appear on the external monitor. Missing from the external display is the word "Start" in the upper left with roughly 2 columns to tiles. This occurs in the two "dual display" or "show only the screen 2" modes.  It's using a resolution of 1680 x 1050 times the cell phone and the LG appearing in support. Using the touch screen on the laptop I can scroll tiles to the right and see the missing columns at the far left. The information displayed on the external monitor begins as far left this screen will be displayed. In other words, there is no black and white on the left box. Except for the missing information on the left side, from the rest of the external display content seems fine. I have updated video driver of the laptop at the latest on HP.COM.  No change in behavior. I tried all the options I could find on the LG OnScreenDisplay, but nothing does the display not better. I've seen complaints on some forums that some "DPI" support added in Windows 8.1is causing many grief monitor for some people. Who would have something to do with it?

  This sounds like a video driver problem?  Something incorrect or incompatible with this LG monitor? Suggestions on other things to try?

  Thank you

  @outback ,

  Hello and thanks for the display on the HP support forums,

  The first thing I would try this question takes the hdmi cable and plug it on another monitor or a TV.

  If the same problem exists then LG issue.  If the same problem occurs on other screens or TV then looking at a resolution problem on the output of the system.

  Even if you can be able to higher resolutions sometimes native resolution will eventually force you to lower it.

  I have two screens at home who can manage resolution 1680 x 1050, however the native resolution is less than that.  and according to what I connect to the screen will depend on what I can get away with.

  Here are some links that you can see and which can be useful.

  Troubleshooting screen HDMI and sound problems

  I checked on the model of monitor you are using, and it seems to have this problem on many different systems.

  LG L246WPQ

  L246WP 24 '' LG display moved to the left driver Nvidia 8.15.11 - EVGA GTX 260

  Here is a list of the problems of google I found.

  The screen shifted to the left.

  I would like to know how this happens.

  Thanks again for posting and have a great day.

• HP pavilion dv6 Notebook PC: question seeks to get drivers for my ATI Mobility HD7470M updated

  Can't find update drivers for my laptop Hp Pavilion dv6 smart who has the graphics card ATI Mobility HD7470M, once recommended with AMD driver auto-detect mess to the top of the resolution and the only solution to that is a system restore.

  AMD Catalyst center can't find updates for 2011.

  Thanks for the help

  See you soon

  Hi @lancer71 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your Hp Pavilion dv6 Notebook and questions with looking for a new driver for your ATI Mobility HD7470M.  The driver will change not only updated. If the device works properly I wouldn't try to change the system.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Thank you.

• Facebook questions: failed to load games on FB and cannot play the videos (except YouTube) on FB.

  HP with Windows 7 64 bit.

  Problems with online games.  On the shock wave, have not been able to view the partitions for months.  Cannot load games on Facebook and can not read other than videos YouTube videos.

  Had a virus're - directing' last week.  At an online business to get rid of.  Since then, I had problems FB.

  Also: cannot open PDF files unless I open them directly from Adobe.  Boring.

  Any suggestions?

  Hi, try the following steps.

  Download and install SuperAntiSpyware (free version) from superantispyware.com and run a system full scan and remove all infections and restarted when prompted to.

  Then, open your browser and go to adobe.com and download the latest Adobe Flash Player and Shockwave Player.

  Then try to see if that fixed it.

  Also try changing your browser. Instead of Internet Explorer, try Mozilla Firefox.

  Most likely related to spyware or virus that you had or still have left of which is the origin of the problem.

• Flash cs6 3.8 AIR app questions: can not load child SWF files

  Hello - I have a flash for ios application that loads external swf child on a button click; When I use AIR 3.8 I can't load. Everything works fine on the generator to preview, but when I publish the device, none of the child SWFS play; It's very strange! Help, please... I don't really know why it doesn't work.

  Here is the code on the main timeline to load the child swf file:

  Start button

  start_button_TRI_herrerasaurus.addEventListener (MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_04_3, false, 0, true);

  Import fl.display.ProLoader;

  import flash.events.Event;

  var fl_ProLoader_04: ProLoader;

  This variable keeps track of if you want to load or unload the SWF file

  var fl_ToLoad_04:Boolean = true;

  function fl_ClickToLoadUnloadSWF_04_3(event:MouseEvent):void

  {

  If (fl_ToLoad_04)

  {

  fl_ProLoader_04 = new ProLoader();

  fl_ProLoader_04.load (new URLRequest("dinofilms/triassic_herrerasaurus.swf"));

  fl_ProLoader_04.contentLoaderInfo.addEventListener (Event.COMPLETE, onComplete_04)

  addChild (fl_ProLoader_04);

  fl_ProLoader_04.x = 0;

  fl_ProLoader_04.y = 144;

  }

  on the other

  {

  If (fl_ProLoader_04! = null) {}

  removeChild (fl_ProLoader_04);

  fl_ProLoader_04.unloadAndStop ();

  fl_ProLoader_04 = null;

  }

  }

  fl_ToLoad_04 =! fl_ToLoad_04;

  }

  function onComplete_04(e:Event):void {}

  e.currentTarget.content.addEventListener (Event.ENTER_FRAME, OEF_04);

  }

  function OEF_04(e:Event):void {}

  If {(e.currentTarget.currentFrame is e.currentTarget.totalFrames)

  e.currentTarget.stop ();

  e.currentTarget.removeEventListener (Event.ENTER_FRAME, OEF_04);

  removeChild (fl_ProLoader_04);

  fl_ProLoader_04.unloadAndStop ();

  fl_ProLoader_04 = null;

  }

  }

  for air for ios 3.6 +, you need TO report a loadercontext even if there is no actionscript in the loaded swf file:

  var loader: Loader = new Loader();

  var lc:LoaderContext = new LoaderContext (false null, ApplicationDomain.currentDomain),

  Loader.Load (new URLRequest("dinofilms/cretaceous_ankylosaurus.swf"), _lc);

• Question of the loading Animation

  I posted the code that I use for my preloader below. When my .swf is preloading my loading bar moves very smoothly. I have a problem with the part of the code I labled //HERE IS ANIMATION CODE.
  
  This code basically takes a movieclip called "sammy" to the frame that corresponds with the percentage of loading. So it looks like the animation progressed only that the percentage has increased, but it doesn't. Instead it forward most of the time, but sometimes jumps back a few frames, then goes forward again.
  
  When I run a trace(); the numbers never jump back. It shows the same number repeated or moved up.
  
  Any suggestions or pointers would be great.
  
  PS - AS3 is greatly appreciated Adobe!

  and apply gotoAndStop(), gotoAndPlay() to sammy not.

• question in utilities > load.

  Hi all
  
  In the structure of the database, we have columns this AutoComplete and we test in TOAD.
  When the import in the APEX as follows:
  Home > utilities > loading data,.
  We have got following error.

  There are NO NULL columns in schema.table. Select this option to download data without error.

  How to solve the problem?

  In the APEX, the following steps take the Nuallble.

  Home > SQL Workshop > Object Browser
  Choose Edit columns on the second level

  Please check the picture to the following URL.

  http://nyfgac.blogspot.com/

  Do not forget to reward!

• 2 part question: stop animation/loading movie animation movie

  Well, I'm a guy VBA and taking on a project in Flash. Then 72 hours into it I'm going nuts on a simple = P. problem I read a tutorial of http://www.echoecho.com/flashbuttons02.htm on how to make animated buttons. Everything went well, I could DL the FLA and really see the inner workings. However. When I mouse over I hold out to play, but not in a loop. I can't stop. I want my button to switch from black to 20% alpha and stay on mouse out, 20% alpha - black. This code on the site makes loop, which is very unpleasant. (Also in the FLA they use graphics together, what advantage for that?)
  
  If the second part. My button, I would like to 'down' to allow a different .swf to open and play on the other half of my layout. I'm coding onpress() on the lower button or elsewhere in Florida
  
  I wanted to attack my fla file, but I guess you can't. regardless if ppl need to see more of what I do, then I can host on my website. I thought that it is as soon as I know I'll get it something quite basic.
  
  http://www.alexrat.netfirms.com/portfolio/teevo/teevo.htm - this is a site that I liked. It has the Nice buttons as I am building and then on the mouse clicks, it changes the other side of the page. That's what I'm aiming for.

  as I said, completely remove your button now... Then place a black rectangle on stage with some text that you want the button to say on it, then select the two and create new Clip... in the frame 1 insertion stop();... allows you to frame say 10 (can be anything) make keyframe and make the 20% active alpha, also put a stop(); action on the framework...
  now, back to the main timeline, click on your new Clip from the film, give it the name of the instance of some ex: my_mc...
  now place this code on the main timeline on a keyframe, not on the clip, on a keyframe, my guess is that it will be a framework.
  my_mc.onRollOver = function() {}
  my_mc.gotoAndPlay (2);
  }
  my_mc.onPress = function() {}
  container_mc.loadMovie ("Your.swf");
  }
  container_mc is empty Movie Clip on stage... this way is to create a clip with nothing in it, place it on stage and give it an instance name of container_mc... That's what your swf file is loaded into.

  IM giving a link to an example... If you click on frame 1 of the 'actions' layer and replace where it says yourSWFname.swf with exactly what his application, it should work without a hitch.

  Here is an example

• Question about work load alerts

  vCOPs has been running in our environment for 10 months and more. So far it has been used more for critical alerts that analysis. We are trying to get a deeper understanding.

  5.8.1 running

  I read the following messages, but am still a little foggy on why we see what we see.

  https://communities.VMware.com/message/2396460#2396460
  

  https://communities.VMware.com/thread/449924
  

  We receive alerts alert network that demand is to reach 100% of the available resources.

  New alert Type: health, Sub-Type: workload, State: immediate, kind: HostSystem

  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: immediate
  Resource type: HostSystem

  We receive as critical network warns that demand 100% of available resources.

  Nalert Type ew: health, Sub-Type: workload, State: criticism, genre: HostSystem,
  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: critical
  
  

  If you look at the attached doc you can see actual usage during the alarm time is about 55% of the capacity and actual use during the critical alert is about 77% of the capacity.

  If the alerts are not an indication of actual use of NIC I'm not sure what we say the alerts.

  Any help would be appreciated.

  This network IO bar there is just the last collected metrics. You need to appear a metric chart, where draw you the overall badge | the workload for this host, as well as individual workloads of cpu/mem/disk/network. Look back the past 24 hours or 7 days... and you will see them fortification (vC Ops is not incorrect to say that you are 100 > 90). It is these spikes that can cause alerts. One option would be that you could reduce the alert for infrastructure. workload in config policy to not notify you when this product (alert system host workload). Or instead to drop quite alert, simply set the levels of warning/immediate not getting attention, the critical value to 100 and see what is happening (for the badge of infrastructure workload changes). However, probably if you let this long race, vC Ops will learn the maxObserved of the NIC and conditioned as well higher watermark beyond your normal percentage of 80/90/95 levels.

  For CAP / etc, you can ignore the e/s disk and network i/o, but not the case with the calculations of badge of health.  If you need to exclude individual components of the overall workload of a vSphere resource calculation, the only way is to stop the alerts on the overall badge "charge" and alert on the parameters of work of children... e.g. cpu | workload, mem | workload, etc.

  A lot of options... Try them and see what works best for you.

• Created a portfolio in acrobat XI, saw the question seeks to amend in acrobat standard DC

  Created a portfolio in acrobat XI, but can't not see all portfolio files in acrobat standard DC and how to change the text on the description of folder

  Maybe you need Acrobat Pro.

• RAW, RAW, questions of color loading in the rules of ENGAGEMENT for printing

  Total newbie (on RAW) so please be nice... In general, I shoot in JPEG (I know, this prob a loser to many of you) but I found if you nail the in-camera white balance, it especially works very well, in any case, after all the hype that I gave the FIRST one, I agree the recovery of a sky exposed was nice.  Here's my problem, I opened the image in the LR-make small exposure settings, open in PS because that's what I'm most familiar with, play with the curves/levels/sat etc.  Get the way I like.

  Save to JPEG (image looks good on my monitor, Facebook, as a file of email on my ipad), go to download through my lab ROES and all loose hell breaks, the colors look Horrible!  Then covered flat and greenish.  I do my research, check my color in PS and my camera settings, try to save a picture to all the color settings available in PS and download different versions.  All flat and greenish.  I then save the image with the option 'save for web', it looks good when downloaded in RE, so I think maybe I have solved the problem. However, when I open this picture upwards to the PS, it resembles an over-saturated undesirable way.  What I'm doing wrong, never had this issue when shooting in jpeg, please be kind and please help me.  Am I missing something?

  Sincerely, Raw all CRU in Idaho

  PS - using PS/LR CC, Nikon d7100

  go to the photoshop forum for attention:

  Guinot