Questions of traction load

Similar Questions

• traction load script error

  Hello

  I'm implementing a traction load script. However, there is an interesting error. When I write to the RADIUS 0.95 this gives: Load Pull fields must use '. ' as a separator, not «,» When I write 0.95 this gives: RADIUS should be<=0,999. what="" is="" the="" problem?="" i="" couldnt="" solve="" the="" problem,="" so i="" couldnt="" start="">

  Best regards

  We at 10.08 for version 10 of our software and V11 is in final beta and will be released.   My guess is 10.08 will fix this problem because I know that we had a few problems here.   I have no idea why your message to update does not work.   If you can give me the serial number of your license, I can study.   Select help > to the subject and in the middle of the page there will be a SN: text and then a number that indicates the serial number.

• Assets in question to _system loading pages

  Hi, I do not know if it is a question or if I'm doing something wrong. Load images for my site system pages: worldwide success

  

  Your help is appreciated!

  Diego.

  Hi Diego

  Reference to the image file is bad, check this screenshot

  

  I have changed the... / images/image and it solved the problem.

  You can try and let me know if it works.

• Facebook questions: failed to load games on FB and cannot play the videos (except YouTube) on FB.

  HP with Windows 7 64 bit.

  Problems with online games.  On the shock wave, have not been able to view the partitions for months.  Cannot load games on Facebook and can not read other than videos YouTube videos.

  Had a virus're - directing' last week.  At an online business to get rid of.  Since then, I had problems FB.

  Also: cannot open PDF files unless I open them directly from Adobe.  Boring.

  Any suggestions?

  Hi, try the following steps.

  Download and install SuperAntiSpyware (free version) from superantispyware.com and run a system full scan and remove all infections and restarted when prompted to.

  Then, open your browser and go to adobe.com and download the latest Adobe Flash Player and Shockwave Player.

  Then try to see if that fixed it.

  Also try changing your browser. Instead of Internet Explorer, try Mozilla Firefox.

  Most likely related to spyware or virus that you had or still have left of which is the origin of the problem.

• Flash cs6 3.8 AIR app questions: can not load child SWF files

  Hello - I have a flash for ios application that loads external swf child on a button click; When I use AIR 3.8 I can't load. Everything works fine on the generator to preview, but when I publish the device, none of the child SWFS play; It's very strange! Help, please... I don't really know why it doesn't work.

  Here is the code on the main timeline to load the child swf file:

  Start button

  start_button_TRI_herrerasaurus.addEventListener (MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_04_3, false, 0, true);

  Import fl.display.ProLoader;

  import flash.events.Event;

  var fl_ProLoader_04: ProLoader;

  This variable keeps track of if you want to load or unload the SWF file

  var fl_ToLoad_04:Boolean = true;

  function fl_ClickToLoadUnloadSWF_04_3(event:MouseEvent):void

  {

  If (fl_ToLoad_04)

  {

  fl_ProLoader_04 = new ProLoader();

  fl_ProLoader_04.load (new URLRequest("dinofilms/triassic_herrerasaurus.swf"));

  fl_ProLoader_04.contentLoaderInfo.addEventListener (Event.COMPLETE, onComplete_04)

  addChild (fl_ProLoader_04);

  fl_ProLoader_04.x = 0;

  fl_ProLoader_04.y = 144;

  }

  on the other

  {

  If (fl_ProLoader_04! = null) {}

  removeChild (fl_ProLoader_04);

  fl_ProLoader_04.unloadAndStop ();

  fl_ProLoader_04 = null;

  }

  }

  fl_ToLoad_04 =! fl_ToLoad_04;

  }

  function onComplete_04(e:Event):void {}

  e.currentTarget.content.addEventListener (Event.ENTER_FRAME, OEF_04);

  }

  function OEF_04(e:Event):void {}

  If {(e.currentTarget.currentFrame is e.currentTarget.totalFrames)

  e.currentTarget.stop ();

  e.currentTarget.removeEventListener (Event.ENTER_FRAME, OEF_04);

  removeChild (fl_ProLoader_04);

  fl_ProLoader_04.unloadAndStop ();

  fl_ProLoader_04 = null;

  }

  }

  for air for ios 3.6 +, you need TO report a loadercontext even if there is no actionscript in the loaded swf file:

  var loader: Loader = new Loader();

  var lc:LoaderContext = new LoaderContext (false null, ApplicationDomain.currentDomain),

  Loader.Load (new URLRequest("dinofilms/cretaceous_ankylosaurus.swf"), _lc);

• loadMovieNum - question seeks to loading MC

  Hi all, I have just registered so greetings to everyone.

  I have index.fla and inside I'm loading others *. Fla.

  Everytnig works well when the film loaded for example realizacje.fla has more then 1 frame.

  Problem is when in example 10 frame, I put a MC and part 1 "stop()";

  Such a file works fine but when it is loaded to index around, working as the stop action is not visible or something like that.

  The MC is loaded by

  on {(overview)

  gotoAndPlay (2);

  }

  on (releaseOutside, deployment) {}

  gotoAndPlay (11);

  }

  on (release) {}

  loadMovieNum ("realizacje.swf", 1).

  }

  in the file realizacje.swf that I use for example eventListeners

  MC01.addEventListener (MouseEvent.ROLL_OVER, rOverLeft);

  and also, in frame 1, I've got stop() action.

  What I am, I am doing wrong. I hope that I have described my problem understandable.

  concerning

  It seems the file that you are trying to load an AS3 file.  An AS2 file cannot load an AS3 file.

• Question of the loading Animation

  I posted the code that I use for my preloader below. When my .swf is preloading my loading bar moves very smoothly. I have a problem with the part of the code I labled //HERE IS ANIMATION CODE.
  
  This code basically takes a movieclip called "sammy" to the frame that corresponds with the percentage of loading. So it looks like the animation progressed only that the percentage has increased, but it doesn't. Instead it forward most of the time, but sometimes jumps back a few frames, then goes forward again.
  
  When I run a trace(); the numbers never jump back. It shows the same number repeated or moved up.
  
  Any suggestions or pointers would be great.
  
  PS - AS3 is greatly appreciated Adobe!

  and apply gotoAndStop(), gotoAndPlay() to sammy not.

• question in utilities &gt; load.

  Hi all
  
  In the structure of the database, we have columns this AutoComplete and we test in TOAD.
  When the import in the APEX as follows:
  Home > utilities > loading data,.
  We have got following error.

  There are NO NULL columns in schema.table. Select this option to download data without error.

  How to solve the problem?

  In the APEX, the following steps take the Nuallble.

  Home > SQL Workshop > Object Browser
  Choose Edit columns on the second level

  Please check the picture to the following URL.

  http://nyfgac.blogspot.com/

  Do not forget to reward!

• 2 part question: stop animation/loading movie animation movie

  Well, I'm a guy VBA and taking on a project in Flash. Then 72 hours into it I'm going nuts on a simple = P. problem I read a tutorial of http://www.echoecho.com/flashbuttons02.htm on how to make animated buttons. Everything went well, I could DL the FLA and really see the inner workings. However. When I mouse over I hold out to play, but not in a loop. I can't stop. I want my button to switch from black to 20% alpha and stay on mouse out, 20% alpha - black. This code on the site makes loop, which is very unpleasant. (Also in the FLA they use graphics together, what advantage for that?)
  
  If the second part. My button, I would like to 'down' to allow a different .swf to open and play on the other half of my layout. I'm coding onpress() on the lower button or elsewhere in Florida
  
  I wanted to attack my fla file, but I guess you can't. regardless if ppl need to see more of what I do, then I can host on my website. I thought that it is as soon as I know I'll get it something quite basic.
  
  http://www.alexrat.netfirms.com/portfolio/teevo/teevo.htm - this is a site that I liked. It has the Nice buttons as I am building and then on the mouse clicks, it changes the other side of the page. That's what I'm aiming for.

  as I said, completely remove your button now... Then place a black rectangle on stage with some text that you want the button to say on it, then select the two and create new Clip... in the frame 1 insertion stop();... allows you to frame say 10 (can be anything) make keyframe and make the 20% active alpha, also put a stop(); action on the framework...
  now, back to the main timeline, click on your new Clip from the film, give it the name of the instance of some ex: my_mc...
  now place this code on the main timeline on a keyframe, not on the clip, on a keyframe, my guess is that it will be a framework.
  my_mc.onRollOver = function() {}
  my_mc.gotoAndPlay (2);
  }
  my_mc.onPress = function() {}
  container_mc.loadMovie ("Your.swf");
  }
  container_mc is empty Movie Clip on stage... this way is to create a clip with nothing in it, place it on stage and give it an instance name of container_mc... That's what your swf file is loaded into.

  IM giving a link to an example... If you click on frame 1 of the 'actions' layer and replace where it says yourSWFname.swf with exactly what his application, it should work without a hitch.

  Here is an example

• Question about work load alerts

  vCOPs has been running in our environment for 10 months and more. So far it has been used more for critical alerts that analysis. We are trying to get a deeper understanding.

  5.8.1 running

  I read the following messages, but am still a little foggy on why we see what we see.

  https://communities.VMware.com/message/2396460#2396460
  

  https://communities.VMware.com/thread/449924
  

  We receive alerts alert network that demand is to reach 100% of the available resources.

  New alert Type: health, Sub-Type: workload, State: immediate, kind: HostSystem

  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: immediate
  Resource type: HostSystem

  We receive as critical network warns that demand 100% of available resources.

  Nalert Type ew: health, Sub-Type: workload, State: criticism, genre: HostSystem,
  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: critical
  
  

  If you look at the attached doc you can see actual usage during the alarm time is about 55% of the capacity and actual use during the critical alert is about 77% of the capacity.

  If the alerts are not an indication of actual use of NIC I'm not sure what we say the alerts.

  Any help would be appreciated.

  This network IO bar there is just the last collected metrics. You need to appear a metric chart, where draw you the overall badge | the workload for this host, as well as individual workloads of cpu/mem/disk/network. Look back the past 24 hours or 7 days... and you will see them fortification (vC Ops is not incorrect to say that you are 100 > 90). It is these spikes that can cause alerts. One option would be that you could reduce the alert for infrastructure. workload in config policy to not notify you when this product (alert system host workload). Or instead to drop quite alert, simply set the levels of warning/immediate not getting attention, the critical value to 100 and see what is happening (for the badge of infrastructure workload changes). However, probably if you let this long race, vC Ops will learn the maxObserved of the NIC and conditioned as well higher watermark beyond your normal percentage of 80/90/95 levels.

  For CAP / etc, you can ignore the e/s disk and network i/o, but not the case with the calculations of badge of health.  If you need to exclude individual components of the overall workload of a vSphere resource calculation, the only way is to stop the alerts on the overall badge "charge" and alert on the parameters of work of children... e.g. cpu | workload, mem | workload, etc.

  A lot of options... Try them and see what works best for you.

• RAW, RAW, questions of color loading in the rules of ENGAGEMENT for printing

  Total newbie (on RAW) so please be nice... In general, I shoot in JPEG (I know, this prob a loser to many of you) but I found if you nail the in-camera white balance, it especially works very well, in any case, after all the hype that I gave the FIRST one, I agree the recovery of a sky exposed was nice.  Here's my problem, I opened the image in the LR-make small exposure settings, open in PS because that's what I'm most familiar with, play with the curves/levels/sat etc.  Get the way I like.

  Save to JPEG (image looks good on my monitor, Facebook, as a file of email on my ipad), go to download through my lab ROES and all loose hell breaks, the colors look Horrible!  Then covered flat and greenish.  I do my research, check my color in PS and my camera settings, try to save a picture to all the color settings available in PS and download different versions.  All flat and greenish.  I then save the image with the option 'save for web', it looks good when downloaded in RE, so I think maybe I have solved the problem. However, when I open this picture upwards to the PS, it resembles an over-saturated undesirable way.  What I'm doing wrong, never had this issue when shooting in jpeg, please be kind and please help me.  Am I missing something?

  Sincerely, Raw all CRU in Idaho

  PS - using PS/LR CC, Nikon d7100

  go to the photoshop forum for attention:

  Guinot

• Load balancing question

  Hi all

  I have a question on the load balancing between several hosts of session.

  We have 6 Guest session, I created a managed with a specifik balancing application rule "Session desktop host advanced remotely. last Friday, he started a few problems, but we have not made any changes.

  the fist session host server had 71 active users and other servers were only 30.

  How is that possible?

  Do I have to put the rule on each server load balancing?

  Hello Sander,

  You must apply the rule individually for each RDSH of load balancing. Not on the managed desktop application. In our configuration, this does not work then maybe of the same counts for you.

  concerning

  Sijtze

• Load the text with URLLoader question

  I want to use URLLoader to load a section of my joomla website textified
  
  http://grapeplus.ca/HTML/index.php?option=com_content & view = article & ID = 7 & Itemid = 8 & tmpl = Text
  
  and here is my code:
  
  var myTextLoader:URLLoader = new URLLoader();
  var myTextField_txt:TextField = new TextField();
  myTextField_txt.wordWrap = true;
  myTextField_txt.autoSize = TextFieldAutoSize.LEFT;
  
  myTextLoader.addEventListener (Event.COMPLETE, onLoaded);
  
  function onLoaded(e:Event):void {}
  myTextField_txt.text = e.target.data;
  addChild (myTextField_txt);
  }
  myTextLoader.load (new URLRequest (" http://grapeplus.ca/Html/index.php?option=com_content & view = article & id = 7 & Itemid = 8 & tmpl = text"));
  
  
  and it showed as:
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  There is currently no special monthly
  
  
  
  
  
  
  
  with plenty of space before the actual line, if I visit the site http://grapeplus.ca/Html/index.php?option=com_content & view = article & id = 7 & Itemid = 8 & tmpl = text , there no space beforehand, how can but I delete them when I insert the text?

  I got it work XD

  var myTextLoader:URLLoader = new URLLoader();
  var myTextField_txt:TextField = new TextField();
  myTextField_txt.wordWrap = true;
  myTextField_txt.autoSize = TextFieldAutoSize.CENTER;

  myTextLoader.addEventListener (Event.COMPLETE, onLoaded);

  function onLoaded(e:Event):void {}
  myTextField_txt.text = e.target.data;
  myTextField_txt.text = ltrim (myTextField_txt.text);
  addChild (myTextField_txt);
  }

  function trim(s:String):String {}
  While (s.substr (0.1) =="" | ") s.substr (0.1) == '\n ' | {s.substr (0.1) == "\r")}
  s = s.substr (1);
  //}
  While (s.substr (s.Length - 1, 1) is"" | ") s.substr (s.Length - 1, 1) == "\n" | {s.substr(s.Length-1,1)=="\r")}
  s = s.substr (0, s.Length - 1);
  //
  //}
  return s;
  //}

  function ltrim(matter:String) {}
  If ((matter.length>1) |) (matter.length == 1 & matter.charCodeAt (0) > 32 & matter.charCodeAt (0))<255))>
  var i: int;
  i = 0;
  outn (I<=32 ||="" matter.charcodeat(i)="">= 255)) {}
  i ++ ;
  }
  importance = matter.substring (i);
  } else {}
  question = "";
  }
  the same question;
  }

  myTextLoader.load (new URLRequest (" http://grapeplus.ca/Html/index.php?option=com_content&view=article&id=7&Itemid=8&tmpl=text"));

  addChild (myTextField_txt);

  Thanks for the replies, helped a lot

• Load pull to the output corresponding to network design

  Hello

  I tried to design the entrance and exit of the matching networks for a power amplifier using the traction load script and the elements of HBTUNER2. According to the contours of traction load, the optimal point impedance is 15.37 - j21.99 (I chose a compromise between EAP, DCRF and PGain). Now my question is when I use the wizard iMatch to convert this to a 50 ohm termination impedance, use 15.37 - j21.99 or the conjugate 15.37 + j21.99? Otherwise, what is the reason? I always thought that load a script pull gave the impedance looking into the port of the active peripheral side. How did the point impedance suggested by loading a script pull to interpret?

  Thank you much in advance.

  
  

• YouTube videos on other sites won't load not

  I can't play Youtube videos embedded on other sites. When I click to play one, the video never loads. If I click on "Watch on Youtube" in the control bar of the video and open the Youtube website, the video, then load and play normally.

  Yes, it's Adblock Plus for me too, even if it does not block anything on the page. If I turn it off for the page in question, the video load. Adjust my Adblock filter preferences seems to have fixed.