Local area 2 connection disconnects, but works very well with active VPN. Wireless works well?

Similar Questions

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• vCenter connects to SQL Server very well with 64-bit DSN, but does not connect with 32-bit DSN

  Created a system DSN 64-bit and 32-bit vCenter server by using SQL Server Native Client 11.0 and exact same settings pointing to the database on a SQL Server 2012 box.  The 64-bit DSN connects very well and the 32-bit DSN fails to connect.  Can someone give some guidance as to what could be the problem?  I have never seen it before.  They are pointing to the same database and use the same local SQL account.

  TIA

  The challenge was to enable the SQL Server Browser service in the SQL box - it is disabled by default in Windows with SQL Server 2012 2012...  This should really be documented by VMWare.

• Help Web site is not displayed right on the server, but seems very well on my files the.

  After that I downloaded my site on my server pages lost their format, the only page that seems correct is my index page.

  That's how it should look like.  (local file)

  This is what it looks like on the (server)

  Help, please

  The point of Nancy does very well, is that from the server, the web page cannot find a file whose path begins by file:///C|/Users/tdavis/Documents/... because your C drive do not EXIST on THE SERVER.

  You MUST correct these references in your code so that they actually point to the file in a relevant folder root path.

  When you have not defined a site again, (as requested) DW will use an 'absolute' path to the file that includes the drive and the folder names in the path. Once the site is defined these must change to show only the location of the root folder, but this does not always happen. If you don't check and change these stray file path references before you put the files on the server, the Web page will not be able to reference what he should look and work properly.

• Connect-VIServer throws the invalid URI error in the Studio of Powershell, but is very well outdoors

  I don't know if it's a problem of Powershell Studio 2014 or PowerCLI, but other people have reported the "invalid URI: the hostname could not be parsed" error, so I'll start here.

  I have a PowerCLI 5.0.1 on Windows 7, Powershell v2.0 and Powershell Studio 2014.

  In my script, when I run the Connect-VIServer-Server $server command, the command fails and generates the invalid URI error.  However, when I run my script in the command window PowerCLI, the script works fine.

  I guess I have a problem of environment in the Studio of Powershell, but wonder what circumstances causes PowerCLI to raise this error.

  So far, I have not had much luck with Studio 2014 Powershell and PowerCLI, don't know if it's powershell v2.0 or something else.

  It looks like a Studio of Powershell environment problem.

  I have many ps1 files and use the point of supply to load the files ps1 in support which includes the call to connect-VIServer.  When I put the connect-VIServer in the file main ps1 I can connect to my vCenter, but when I put in the origin file, I cannot connect, nor can fact the fitting of test-work order.

  Thanks for the help.

• keep saying my mozilla profile has been deleted and will not open firefox - IE work and connect to the internet very well very sick of this 4th time this week

  Firefox will not open - 4 times this week he froze and crashed and I have to disable my internet connection, then re add before this will work unless I can fix this quickly I going to chrome

  have you tried full uninstall and clean install?

• WSUS server and customer switching Windows 8 does not connect, Windows 7 is very well

  I need to divide the load of my WSUS on another site because the amount of computers is put to the test the internet connection amount of downloads.

  However, I am having a problem with the second WSUS where only clients Windows 7 and Server 2003 updates...

  8.1 for Windows Server 2008 and Server2012 does not update give the following error codes: 8024400 a and 80072EE2

  The WSUS is a Server 2012 with up-to-date local editor 1.1 is installed. It works fine locally on the site but not in any of our wide AREA network.

  I tried it with the firewall disabled...  Clients appear in the WSUS console, but fail to check the updates.

  Two WSUS servers use Microsoft PEIE 2012.

  If anyone out there has experienced this?

  See you soon,.

  Chris

  Chris

  Server issues are beyond the scope of this site and should be asked on the Technet site

  http://social.technet.Microsoft.com/forums/en-us/home

• Aspire 9805 - no graphics but messages very well

  So my 9805 sucks old but formerly robust was blowing only fine until this morning.  The unit displayed in the bios then frozen.  After checking everything I finally seeded and redefined the RAM, cmos (disconnected the cmos battery and reconnected in) removed the battery and the hard disks, etc. and put back together.  I am now able to enter the bios and raid Intel screens however if I try to boot into anything "Graphic" it just hangs.  For example, no windows, no windows wouldn't boot cd acronis true image or graphic of Seagate seatools charger not even.  If I am on the back like screens (bios, raid, Intel, etc.), weather and display is fine.  I could even begin on 'text' of Seagate diagnostics to detect the disks are fine.  I tried to start with and without the battery and hard drives and about all the other combo I could think.  The system, trying to display graphics other than the style of 'Back' just stops, forever.  I was thinking maybe a bad integrated video processor except usually they do not continue work correctly in non-graphical mode.  Any ideas or suggestions are appreciated!

  I think that I figured it if that seems odd...

  I tore the laptop everything down again last night literally removing everything that was not glued (wireless, bluetooth, readers, ram, battery, you call it) then put a couple different sticks of RAM back (with him remains yet deleted) and started up a diagnosis with the graphics CD to see if it would start.  He did.  Progress.

  Then, a device at one time I put back in the original material and tried to start to make sure that this device has been authorized.  Finally, the original RAM was the culprit.  One of the DIMMS tested with errors in memcheck, 2 so I let on and spin on the other original with half of the ram but everything starts.  I've seen many questions ram in my time, but none that has caused a system do not display graphics of any kind.  Usually they just blue screen or lock upward.  Guessing the chip from nVidia G73 was attempting to use the RAM of the system that was wrong every time.  As I said, weird, but at least it works again.  I just wanted to post an update in case someone else runs into this.

• HP Envy 4522: HP Envy 4522 stopped accepting the password on Lenovo laptop but still very well with 5 Nexus?

  Hello!

  A few months ago, I installed my printer and it worked perfectly on both devices: laptop Lenovo Y700 (Windows 10) and Nexus 5 (Android).

  As far as I know that it didn't change with the computer, outside of those frustrating mandatory Windows updates. The last time I printed something with the laptop was a few weeks ago and all went well. This afternoon, she asked my network key and it does not accept my Wifi password.

  Everything is fine and prints no problem when I use the smartphone.

  I have re-configured network wifi directly on the printer, but it has not made a difference.

  I have not changed internet provider.

  Can someone please clarify/help me?

  Thank you!

  Marilyn

  Hi @Merlin999,

  Thank you for showing interested by the HP's Support Forums!

  I understand that you are able to print from your Android device, but not from the computer Windows 10. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like it's an address IP comes into conflict with the computer or there is a print driver problem. Windows updates can cause changes with print drivers.

  Please check that the printer and the computer are the on the same network.

  Tips for successful network configurations:

  • How old is the router? Update the firmware on the router.
  • Don't hide the SSID (network name).
  • Do not use a network of comments (SSID).
  • Using a unique network name (SSID).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz network name should not be the same as the name of your network to 5.0 GHz. rename the 5.0 GHz network.
  • Enable DHCP.
  • Avoid using filtering by Mac address of the router.
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • What is the intensity of the signal?

  If the problem persists, please follow the steps in this Post of mine.

  You can try to change your WSD printer port by a Standard TCP/IP port.
  To do this, you need the IP address of your printer. The Network Setup page shows the parameters of network for the product. To print this page; Press the network button on the control panel of the product.
   
  You will then want to follow these steps for the switch port:
  1 locate and open devices and printers.
  2. right click on your printer icon and click printer properties.
  3. click on the Ports tab along the top of the page.
  4. click on the Add port button.
  5. If you have the option for the HP Standard TCP/IP Port, it's just otherwise select Standard TCP/IP Port.
  6. click on the button new port...
  7. click on Next > button in the wizard.
  8. Enter the IP address of your printer from your Network Configuration page. Note: The Port name is automatically filled in. I would recommend to put a check mark in the box. Always print to this device, even if it's the IP address change.
  9. click on the Next > button in the wizard.
  10. click on the Finish button.
  11. This can take you back to the Printer Ports window, you should be able to shut up. Then click on apply and OK in the Properties window.
  12. try to print to see if the problem is resolved.
    
  If the problem persists, try to install your printer using the Integrated Windows Solution.

  • What were the results?

  If the problem persists, we need properly remove and reinstall the software and drivers.

  • Follow the steps in this Post by my colleague @X-23.
  • Click here to download and install the series HP ENVY 4520 full feature software and drivers.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Windows 7 does not recognize my 3 Seagate external drives but is very good with Western Digital and other sticks USB Flash. Windows Vista will see them.

  My apologies if this is a query repeatedly, but I can't find a job anywhere and he leads me into the wall.

  I have 3 external Seagate hard drives. All 3 range from about 3 years 11 months old, 1 TB - 3 TB of capacity, and I use them all from time to time to back up my media. In the past months, my Dell XPS ceased to recognize them, 95% of the time. Sometimes they will be Plug and Play and be fine, but otherwise the result when I plug them is coming the power light and the whirring disc fortunately but nothing on the laptop. They recognized themselves on my other machines running Vista. All other Flash memory devices are very good.

  I also have a hard drive Western Digital external powered, almost identical, that Plug and play every time.

  I tried all my ports and various cables and adapters. I tried them on other machines and they are very good, it seems to be just with my Dell and the Seagates. It recognizes everything that I plug in there from the iPhone to Flash Drives. It has all the latest drivers and Windows updates.

  When they're not working, they do not appear in the devices, disk management, Explorer or UVCView Manager. When they do, all settings appear to be well. My laptop runs Windows 7 Edition Home Premium with Service Pack 1.

  I assigned each their own letter drive, disabled power management and they are not protected by Word. The drivers are the standard Windows ones, because these devices do not use their own. I have the latest chipset drivers, everything works perfectly and is completely up to date.

  When I run UVCView (when one of them does not work), it is said there is an error autour MaxPacketSize, current externally is set to 9 and it said "ERROR: low peripheral speed require bMaxPacketSize0 = 8" branded error. I don't know if this is a factor? This may explain why it's slower transfer data to my machine that has USB3.0 it does on another machine, it begins at 130 MB/s and falls to 30 in 10 seconds.

  I tried all combinations of power off.

  I activated the network detection.

  I uninstalled all the USB in the Device Manager and reinstalled after the start.

  All 3 discs work instantly in my older Vista laptop runing.

  I am a loss to understand. I'm pulling my hair out and I don't have a lot to lose these days! There must be a setting in my computer or on the Seagates but I checked all the usual places and some of the more irritable areas.

  Thank you in advance.

  I'm surprised that the removal of the INFCACHE did not work.  Readers (all external references in fact) were cut at the time, right?  With a reboot after and before you plug anything back?
   
  These instructions really come down to:
   
  Unplug all USB devices other than the keyboard and mouse
  Open C:\Windows\System32\DriverStore
  INFCACHE.1 and rename it INFCACHE.old
  Restart the computer
  Reconnect it (one at a time) each USB device - giving the system about 30 seconds per device to 'catch up '.
   
  If you got on the rest as well your system files are good to go.

• Cannot access the internet (table routing and connection seems to be very well)

  Hello

  I have a problem that I can't know at the present time.
  The problem started after uninstalling cisco anyconnect vpn.
  Description:
  cannot access Web sites or even the router configuration panel
  cannot tracert beyond the first jump (router)
  can ping to ip Internet addresses
  routing table appears to be well
  After disabling all services additional error is always persistent
  computer is connected to the router cable
  So, it seems that something is blocking the connection, but I can't understand what...

  It fixed to the help of netsh winsock reset catalog and restart...

• My table design mode is not editable but seems very well in subject view.

  Because the design view shows that part of the table header row and the rest of the table disappears, I can't change the table in Design view. I pasted the CSS and HTML below. Can anyone offer advice?

  CSS

  table {}

  border-collapse: collapse;

  }

  Th {}

  background-color: #e6e6e6;

  border: solid #009DD9 1.0px;

  color: #009dd9;

  do-family: Arial, without serif.

  do-size: .8em;

  margin: 6px 4px 8px 0px;

  text-align: center;

  vertical-align: top;

  }

  TD {}

  border: solid #009dd9 1.0px;

  border-collapse: collapse;

  Color: #000000;

  do-family: Arial, without serif.

  do-size: .8em;

  margin: .5em .5em 1.5em 1.5em;

  text-align: left;

  }

  HTML

  < table class = "center" >

  < col / >

  < col / >

  < width col = '372' / >

  < style tr = "' page-break-inside: avoid;" > "

  < th > < class p = "NTableHeading" > number < /p > < /th >

  < th > < class p = "NTableHeading" > number < /p > < /th >

  < th > < class p = "NTableHeading" > number < /p > < /th >

  < /tr >

  < style tr = "' page-break-inside: avoid;" > "

  Cell < td > < table >

  Cell < td > < table >

  Cell < td > < table >

  < /tr >

  < style tr = "' page-break-inside: avoid;" > "

  Cell < td > < table >

  Cell < td > < table >

  Cell < td > < table >

  < /tr >

  < style tr = "' page-break-inside: avoid;" > "

  Cell < td > < table >

  Cell < td > < table >

  Cell < td > < table >

  < /tr >

  < style tr = "' page-break-inside: avoid;" > "

  Cell < td > < table >

  Cell < td > < table >

  Cell < td > < table >

  < /tr >

  < /table >

  To add to Amebr; change the margin in the padding. Who will ensure that the content is in no hurry for the cell borders.

• Cannot connect to Virgin Media Home Hub with Atheros AR5007EG wireless adapter

  My brothers computer has problems to our Virgin Media Home Hub wireless conecting. I contacted Virgin Media Services customer and they say that the driver is the worng version. The computer has a driver adapter G series and we need a driver to adapter N series. What is the difference between the two, and where I could get the adapter driver series N of for the Atheros AR5007EG Wireless Adapter?

  I hope someone can help

  Hi Williams,

  Thanks for posting to the community by contacting Microsoft.

  The drivers are developed by the hardware manufacturer. I suggest you to contact the manufacturer for more information about the driver and support:

  https://support.Atheros.com/

  Let us know if it helps.

• Internet Explore works on this machine very well. Mozilla allowing up to this morning. Now when I run mozilla it just shows... Redirect... and keep Flash

  This morning the Mozilla firefox would not connect to the internet (my homepage is Comcast.net). He kept saying "connection" "redirect" and repeat it in succession rapic. So I used internet Explorer and it connected to the internet, very well. I could go to my home page, my e-mail without problem.
  So I went to Mozilla to get an update for firefox and he looked like he downloaded something, but after 'run' and 'run', he began to Firefox, but the same thing happens.
  What's wrong? I have Norton security of Comcast and I had no problem for several years. There has been no change to my computer and it has been defragmented and checked any disk recently.
  I was going to just uninstall Mozilla, but I don't want to lose all my favorites.
  Help, please

  Hello RayGust, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update