Connect-VIServer throws the invalid URI error in the Studio of Powershell, but is very well outdoors
I don't know if it's a problem of Powershell Studio 2014 or PowerCLI, but other people have reported the "invalid URI: the hostname could not be parsed" error, so I'll start here.
I have a PowerCLI 5.0.1 on Windows 7, Powershell v2.0 and Powershell Studio 2014.
In my script, when I run the Connect-VIServer-Server $server command, the command fails and generates the invalid URI error. However, when I run my script in the command window PowerCLI, the script works fine.
I guess I have a problem of environment in the Studio of Powershell, but wonder what circumstances causes PowerCLI to raise this error.
So far, I have not had much luck with Studio 2014 Powershell and PowerCLI, don't know if it's powershell v2.0 or something else.
It looks like a Studio of Powershell environment problem.
I have many ps1 files and use the point of supply to load the files ps1 in support which includes the call to connect-VIServer. When I put the connect-VIServer in the file main ps1 I can connect to my vCenter, but when I put in the origin file, I cannot connect, nor can fact the fitting of test-work order.
Thanks for the help.
Tags: VMware
Similar Questions
-
Can someone explain and or offer a solution to this problem with my Windows XP Home Edition SP3 running on Compaq Presario AMD Athlon 64 Processor.
The monitor displays briefly when the lit after turning on the pc but apparently goes "dead" for about 10 minutes then comes to life.Borrow a monitor from another computer and connect this monitor borrowed from yours, put your monitor on the computer that you have borrowed from the monitor. That should tell you where the problem is quite quickly. I bet that your monitor is dying and needs to be replaced, this test which will confirm.
-
Trapcode particular not showing on Render but works very well in the compose window
Trapcode particular not showing on Render but works very well in the compose window.
Hi do not know why it does not appear in my Render.
My computer is not trolling, everything works fine.
My computer specs:
I7 - 5820 k
GTX 970
16 ram
Composition window:
Render:
Try adjusting the comp on camera Active - this is what happens for rendering. I don't know where you got this name of camera or whether it was imported from a 3D rendering, but to be sure to always have the comp set to camera activates when you're overview of your work.
The usual troubleshooting procedure is to go to the bottom of the list of changed properties and start reset first those most suspicious. Many times it is easier if you solo the layer in question.
The first suspicious that I see, it is the position of your transmitter would be behind a normal camera to default position:
If I add a camera by default to a model, add a solid, add individual and then use your position parameters the particles all move out of sight of the camera
After a reset:
-
Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.
Hello
Please try following the steps and see if it helps
1. Please work through this guide.
https://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html
Follow the instructions in the guide on the provision of the dxdiag report and additional information on what you tested and observed.
2 turn off hardware acceleration in the settings. Steps are mentioned in the link below
How to disable or enable hardware acceleration?
Thank you
-
Integration of UCS with vSphere - invalid URI error
Hello
I fight to integrate the Manager UCS with vSphere vCenter.
The extension of vCenter is exported from the UCSM without error, but when you try to install the plugin via vCenter plug-in Manager I get this error:
"Invalid URI: the URI is empty.
I found this on the web, but this brings me any more to solve the problem:
http://terenceluk.blogspot.com/2010/11/error-message-when-clicking-on-download.html
Any tips?
Kind regards
RadekHi Radek,
So as long as the file is saved in the folder plugins in vCenter, and they appear in the list of plugins, then that's all you need to do. You don't need to click on the 'Download and install' button as this will not work, because you have met. This is because it is a document XML allows to activate and validate your vCenter server and communication between UCS/Nexus 1000v. There is no practical application which is executed and must be installed.
Hope that helps to clarify
Thank you
Michael
-
Hello. I just encountered a problem which disconnects me on the net on my desktop PC. Other material in the House connect to wireless very well, discarding the router or my ISP.
Strangely, when I activate the VPN service there is a connection on the desktop PC. As I turn off again, I see the Local 2 (TAP-Win32 Adapter V9) network connection are disconnected. I checked the properties of the connection once work and does not, and they look identical. I did a full scan of the PC of malware etc, but nothing came.
Any help or advice on what information I need to provide this forum for help with this diagnosis would be greatly appreciated.
Hi André,.
What is the brand and model of the computer?
I suggest you to uninstall and reinstall the network drivers and check.
Follow these steps to uninstall the network drivers.
a. press the Windows key + R and select devmgmt.msc and press enter.
b. search for NIC and expand it.
c. Right-click on the network driver , then select Uninstall.
Now, go to the manufacturer's website to download the network drivers, install the drivers and check out them.
Reference:
Wireless and wired network problems
Let us know the results of the question.
-
I have created a PDF file and for some reason when I discovered in Acrobat Pro or Adobe Reader half of my text is blurry. I tried to export a handful of different ways the two spectators. The text is blurred, but it prints fine both players. What is the reader, the user with the pixelation, CMYK, RGB error? I have really no idea. Is attached a screenshot of what it looks like. I export from Indesign features of illustrator files are linked and printing very well. I'm working on a MacBookPro and my printer is an Officejet 6700.
I have fixed the problem. It was something with the color of the text and the values of k. I pointed out all of the text in the text box, including the text that is not blurred and made sure to transform any return to the true black with no line. From there on, I changed my text in blue to the color I got it. Exported without maximum loss at 300ppi. everything seems to work properly and now the PDF is superb in the Viewer.
-
12 Firefox does not get beyond the crash report. This is a second account (standard). However, it works very well on a third party, as well as on the main one admin account. I reinstalled Firefox, disc repaired permissions and so on, but nothing helped. For the second account .plist file could be damaged? I can't remove it because of permissions so cannot test this. Please notify.
Try to repair disk permissions:
-
AOL 9.6 works very well since XP account administrators but... any other account on the PC when AOL sign on it immeadiately can sign with "AOL had a problem and had to sign. Any ideas? AOL gave a bad scripted reload all the response of the AOL software.
Thank you
Hi Splinter1,Try the steps listed in the article below and check if it helps fix the problem:If this does not help, contact AOL support better. -
The program is configured to run from a direct click using a text file specifying where the source files and destination. Worked very well for a direct click or from the. BAT file. It runs the Task Scheduler, I can see it appear in the Excel Task Manager when it is active. But while it freezes. He reads the spreadsheet looking for specific elements then output to a CSV text file.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
I recently got a new PC and my wireless keyboard and mouse combo made by Microsoft have not worked properly on my new computer. Sometimes, they work fine then other times it's like the keyboard and mouse cuts in and out, make miss me not type letters or the mouse past on the screen. They work fine on my old laptop that runs windows 7 as well. I reinstalled the drivers with those newer. I disconnected all my other stuff without wire and the problem persists. I plugged into different USB ports. I'm only a 1 m from the PC. I have no idea wat the problem would be, but I can assure you that keyboard and mouse work perfectly on my laptop.
Thanks for any helpHi Sean89dunn,
Method 1
I suggest you try the steps from the following links:Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398Method 2
If the steps above fail, then I suggest you perform the clean boot and remove the program that is causing the problem.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note:
follow step 7 of section of boot KB929135 to the computer in normal mode. -
After that I downloaded my site on my server pages lost their format, the only page that seems correct is my index page.
That's how it should look like. (local file)
This is what it looks like on the (server)
Help, please
The point of Nancy does very well, is that from the server, the web page cannot find a file whose path begins by file:///C|/Users/tdavis/Documents/... because your C drive do not EXIST on THE SERVER.
You MUST correct these references in your code so that they actually point to the file in a relevant folder root path.
When you have not defined a site again, (as requested) DW will use an 'absolute' path to the file that includes the drive and the folder names in the path. Once the site is defined these must change to show only the location of the root folder, but this does not always happen. If you don't check and change these stray file path references before you put the files on the server, the Web page will not be able to reference what he should look and work properly.
-
Try to connect to my Yahoo on Safari brings back me in a continuous loop to the login page. My registration using Firefox works fine.
IM using ios10 on an iPhone 6 s
-
I have a number of photos in my photo library. The printer is a Dell V510 series and was bought in June last with a new computer. He tells me to plug in the USB, it is and several other things that are all connected. In my library of images are printed documents. When I ask to print to it. Also when I received a photo by e-mail or download from my camera I never know where he's going to put the picture. I've never had a problem with my Windows XP but Windows 7 doesn't seem to do what I want it. The instructions that came with it are almost useless. I am not a technician, but I am new to the computer. Thank you
None of the problems you mentioned sound like they are related to Firefox.
You are able to print web pages through Firefox?
This "image library" display images in Firefox, or is it a separate program? y at - it assistance > on the menu in this program item? If Yes, what does say? -
My keyboard and mouse suddenly stopped working today, I was pressing F11 to try to get the system to boot from a recovery screen and it wouldn't, but when he returned to my screen connection and requested my password it won't let me not use the mouse or the keyboard, I wonder if I accidentally turned off something and if anyone knows how to turn it on turn it back on. I'm using vista on a HP dv5
Thank you
Hello Djc618,
Thank you for your message. You have a friend or a family member that can allow you to use a keyboard to see if the material can be defective? You can also try using your keyboard on another computer, if this does not work then you probably have a bad keyboard.We can't wait to hear back on your part.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Questions of Tecra R940 - keyboard and touchpad
TECRA R940: I had problems with my touch pad and the keyboard of the laptop. The button disables itself allows erratically (usually when entering) and several keys on the keyboard either does not work or does not work (pushing allows it to key ALT ke
-
C50-A-1DV satellite will not start
Hello I was wondering if someone could help me I have a computer toshiba laptop and I had problems with my laptop that I got it 3 months and today I went to restart it and only the power led comes on and the fan starts running, but the screen remains
-
Copy the file fails during the preparation of the recovery of 31%
I have a HP Pavilion G7-1139wm product #LW324UA a windows 7 a box with gear box at the top with an exclamation mark in a triangle yellow message is file copy fails From: E:\PRELOAD\BASE2. STORMWATER MANAGEMENT To: C\:RM\Image\BASE2. STORMWATER MANAGE
-
Driver IDT HD said that my hardware is not supported?
Hello I have a HP ENVY dv7 - 7398ca I recently put Windows 7 on. Everything works perfectly except that my speakers are really quiet now. I tried to download and install the driver IDT HD for Windows 7 and during the installation, I got a message say
-
Two4Two V1.0 prevents the computer from closing
I have problems turning off my computer, because it is said Two4Two V1.0 is still ongoing and I can't seem to stop and the computer restarts. So I turn off the machine to restart.