HP Envy 4522: HP Envy 4522 stopped accepting the password on Lenovo laptop but still very well with 5 Nexus?

Similar Questions

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• How to get dell v302 to accept the color cartridge, it admitted black one very well.

  I have a dell v305w printer and I changed the color cartridge for it.  I was able to get the black to work and accept when implemented.  When I put the color it but it goes as usual, I can't accept and the printer says that I am low on ink for color.  I even tried another and still the same thing.  as far as I know that there are no updates, I checked.  I need help but please.  E-mail address is removed from the privacy * thank you

  Any help would be provided by Dell support site, or their Forums

• When I try to connect to the wireless router, it asks you the password I put it and he then asked again and will not accept the password. all other computers (without windows 7) connect correctly.

  My new computer has windows 7 when I try to connect it to my router it ask the password, then he asks the network password I put in the same password and it does not accept it. I spent ove an hour on the phone with a very helpful and confused expert to the Virgin. He tells me that the password only I need to communicate with the router is the main. We tried a lot of things all very technical and finally he gave up. Other computers with vista on connect very well with no problems at all.

  The network is fine and all the settings are fine. Occasionally, it connects via a home network but then it stops. When I try to communicate with the printer wireless signal stops and starts.

  I don't hold much hope of a response that experts were left very confused by this first abandoned after 45 minutes and the second lastered over an hour are totally flumaxed and blame windows 7

  But everyone told me that windows 7 was supposed to be the best

  Your post has nothing to do with the Windows Update feature (compared to the upgrade of Windows). Please repost it here for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista does not accept the password (password not changed or forgotten)

  Vista does not accept the password (we have not forgotten password of windows startup) how can we get around this problem .the password has not been changed or forgotten Vista has a little programming problem which stops the right password

  It is most often caused by the computer being infected, so after you go back into the system, it would be wise to make an analysis.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  You can change your password to something you remember (or use a white) another administrative user account. If you had only an administrative user account, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• BlackBerry Smartphones Blackberry Curve does not accept the password

  My bb curve again is a upward. Yesterday after checking a page Web in the browser, the appliance has stopped working. It does not accept the password and it says card complete multimedia. Haven't tried anything because I don't know what to do. The phone is relatively new, 5 months old and I ringtones but I download music, then how can the support card be filled? I don't know yet if it is linked with the media card since I can't access the phone because the password is not accepted. Any help will be appreciated. Thank you

  Remove the battery and the cardinal of media leave the media card for now.

  Reinsert the battery and start.

  Leave the BlackBerry sit for five minutes after the restart and see what happens.

• Hall 20: I can't do a system restore to overcome the refusal of the system to accept the password.

  I did a restore to factory on the Pavilion 20. Pressing me F11 has troubleshooting screen and I chose the system restore. All right

  I set up the UserName Admin and the password carefully (but don't think to do a password recovery disk).  I installed a different AntiVirus Norton application, a default value.  So I uninstalled Norton.  It required a reboot to complete uninstallation.

  This is where my problems started.

  Upon restart, the computer will not accept the password!  There is no mistake here.  It was carefully designed and entered in the creation of duing twice.  I even considered perhaps that I soon take my finger on the SHIFT key (twice) then tried many variations of SHIFT or no change for the capitals and even the next character in the password.  I restarted 50 times trying to get just one time and then I would like to choose a new password for connection.
  
  For the next, I thought I could just do a restore of the system from zero and re - configure again.  But now there is no option for me to use the system recovery.  This option is missing!  I spent many hours on searches of google for similar problems.  It's just not there.  I tried to use F10 and F11 to enter the system recovery.  I get to the menu troubleshooting and it has 3 options: Refresh uoir PC, reset your PC options and advanced.
  Clicking on advanced options gives me the system restore (a restore point (doesn't) usung) System Image recovery, startup repair, command prompt and UEFI firmware settings.
  
  I'm positn gthis in the hope that I can do a system recovery to the command prompt.  Is this possible?  If this is not the case, how can I do a system restore when the OPtion is not avaiiable?

  My question is: a complete system recovery was done, why it is no longer possible to

  Hello Newton51

  It will display the number of full model of the computer.

  I don't know what happened on your system but when you do the reset of the system, don't go not advanced.

  You should be able to click on reset your PC. That will erase the C: partition and reinstall Windows.

  

  When its finished, and you get to the part where it asks you to create a password for the user, LEAVE BLANK.

  Restart to make sure you can connect without using a password.

  IF you succeed at this stage, create your HP Recovery Media via the HP Support Assistant.

  If you enter an impasse once again, recovery media will wipe the drive and reinstall everything, including the recovery partition.

  NOTE: HP will allow you to record only one copy of the recovery media, so not to interrupt the process when you start.

  Now remove Norton and restart.

  Install this that never new you want security.

  When you're done, go to your user profile and carefully create your word password but do not close yet.

  Create the key to reset password on a USB key.

  Now restart and test your password.

  You have a USB reset if it doesn't.

  ----------------------------------------------------------

  If you are not able, or do not succeed to reset the PC, you have two options. Use the MS media creation tool to create recovery media (from another computer).

  Then, reinstall Windows 8.1 and download your HP drivers and install them.

  Or

  Order directly the appropriate recovery of the HP Support media.

  Contact HP worldwide | HP® official site

  Choose the country you are. Choose Help, then to the House.
  Enter the full product number and follow the prompts to contact Support.

  Chat with an agent will ensure that you get the appropriate recovery media.

  Hope that helps.

• Security updates have blocked incoming messages in Windows Mail - security popup does not accept the password, error number: 0x800CCC92

  Original title: updates blocked mail in Windows Mail - security popup does not accept the password

  Hello - three updates installed security today (KB2691442, 2718523, 2596744).

  Now Windows mail will no longer accept mail entering into my pop3 account.  Security pop - up demand for a/c of the user and the password - I've checked tools > accounts > properties, reset the password, but it does not accept pop-up.  Here is the error message:

  .... POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Help please! John

  Hello

   
  See the steps in the links.
  Troubleshoot Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Hope the information is useful.

• Phone of blackBerry Smartphones do not accept the password

  Hello.  I have a torch 9800.  I was texting last night and my password has worked well.  Then all of a sudden I couldn't connect.  I tried the SIM card in an another blackberry and it was fine.  ATT have me try a SIM unlock access code and it changed nothing.  I'm sure it's the phone, but don't know how to fix it.  I am to 8/10 unsuccessful login.   I saw that you can reset if it spends more than 10 (but will lose all your info).  How do reset you?  Thank you!

  Mrbarley wrote:

  Thanks for the reply.  the prompt only I have is the "password (8/10).  There is no other messages that came, and I know that I have the right password that I use on my blackberry to work as well.

  It certainly looks like the user created password locking device... only it will work. It can be a subtle thing to use keyboard... alt, sym, caps, etc. Or the keyboard can be somehow not in the correct state. A batt pull reboot can reset the keyboard to a normal state by default and allows you to enter your password as usual. But, again, be careful... only 2 chances left.

  Mrbarley wrote:

  I'll try the USB link at home tonight and see if the phone accepts the password via the keyboard of the computer.

  As I said, it is only useful if you've done it before... If you have never done before in this way, you know maybe actually not quite what the exact password characters are (according to alt, caps, sym, use etc.).

  Mrbarley wrote:

  If I have to wipe the phone to use it, it's okay.    Is there a way to reset the phone and set a new password if I don't see not all 10/10 password attempts?

  After the failure of 10th, the BB will wipe clean, including the removal of the password. It will be like it was when you first received it... Nice and new, with nothing about all things created by the user at all.

  Good luck!

• Update CC, CC connect apps you do not accept the password

  I use CC 2 apple macbook and iMac to apple devices.  I registered in the two open CC and "update of all the" fine on my laptop, but it does not accept my password to CC on my iMac.  I left CC on my laptop to see if it would help, but it didn't.  I left and raised on my iMac, but it still does not recognize the password.  the world of password on my iMac to connect to my Adobe account, it just won't let me update the applications.  any ideas?  Thanks for the help!

  Make sure that is not your Mac security require the system password enable changes?

• When you try to insert a digital signature, it does not accept the password, I just reset.  How can I get include the signature?

  When you try to insert a digital signature, it does not accept the password I just reset for Adobe and will not let me. How can I determine what the password, it's who will give me access to insert the signature?

  Hello

  What is the error you get after inserting the password. Although there is no way to recover the password.

  You can simply create a new digital ID with a new password.

  Concerning

  Sukrit diallo

• iPhone 6s more does not accept the password for the first time

  All of a sudden my iphone 6 s more, will not recognize and accept my password.

  First screen says: "enter code". "Touch ID requires your access code when you restart the Iphone."

  Question... is equivalent to a 'code' a 'password'?

  Why she would accept my password and then 30 minutes later he rejects?

  Any ideas would be very appreciated.

  Ray

  Maybe nobody over there wants to take this question!

• do not accept the password

  I'm trying to migrate my email from one account to another, but thunderbird does not simply accept the right password for one of my accounts. I don't know that I am typing correctly. I disabled the connection of 2 steps on my gmail... do not know where to go from here.

  I solved it, it was on the side of gmail.

• Mac does not accept the password - even after changing

  My friend uses a macbook air, I'm pretty sure OSX Yosemite running.

  Suddenly her pimp would not accept his password more.

  We tried to reset the password via his apple ID, but even with the new password it told us that the password is not correct.

  Any ideas how we can solve this problem?

  Thank you!

  Hello

  Try to 'Reset' the admin password > change or reset the password of a user account from OS X - Apple support

• mail will not accept the password

  I saw this question elsewhere with no response, I hope to have an answer.

  I have a macbook pro with OS X El Capitan with Safari 9.1 I got my MB today Soho back, they fixed a problem with my wireless.

  in any case they made the El Capitan upgrade for me, but now my mail does not accept my password. I called my internet provider and they verified that it was the right, it works in webmail, but not e-mail. Any ideas? Thank you.

  The same thing happened to me.