Local disk C does not it is red__Windows vista basic__Please help me__Arelys Moya

Similar Questions

• Volume D: is dirty. Check Disk Local Disk d does not solve the problem

  Whenever I start my computer under WindowsXP SP3, chkdsk runs indicating that the D: Volume is dirty.  He noted no other problems.  I tried to run check disk Local Disk d with two checked options, but it does not solve the probem.  What should I try next?

  That is right.

  First of all, let us look at the ideas of the Microsoft support engineer:

  I would never not follow the suggestion of Microsoft Engineer in method 1.  This idea makes no sense.

  The Microsoft Support Engineer method 2 does not work for you (or most people), unless you have a XP installation CD bootable authentic with the same Service Pack as your installation.  In your case, you would need a true bootable XP with SP3 installation CD and most of the people do not have such an animal.  It is therefore extremely unlikely that will help you at all - and if your file system is damaged or dirty, I of course never suggests that in the first place until your file system is straightened.

  Volumes that contain file system errors is known as "Sales". When a volume is dirty, he has known file system errors, and you must run chkdsk on the volume to repair the problem.

  When XP starts, it automatically checks the on each volume's dirty bit (C, D, E, etc.), and if any volume is dirty, XP will automatically run chkdsk/p on next reboot on the volumes in an attempt to clear the dirty bit.  Which does not clear the bit of impurity or it may take several passes.

  If the volume dirty bit, one is set, this indicates that the file system may be in an inconsistent state. The dirty bit can be set because the volume is online and has some remarkable changes, because changes have been made to the volume and the computer shutdown until the changes have been committed to disk, or because corruption has been detected on the volume. If the dirty bit is set when the computer restarts, chkdsk runs to verify the consistency of the volume.

  Whenever you start a computer that is running one of the Windows XP operating system or the Windows Server 2003 family, autochk.exe is called by the kernel for all volumes to check if the volume dirty bit is set. If the dirty bit is set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f verifies file system integrity and attempts to fix any problems with the volume.

  A simple power interruption is something that could result in a disc was marked as dirty.  Have you had a power failure these days?

  You can query the dirty bit on a volume from the command prompt window.  Here's how:

  Click Start, run and enter in the box:

  cmd

  Click OK to open the command prompt window.

  For example, to query the bit of impurity on drive D, type:

  fsutil dirty query D:

  The sample output:
  Volume D: is dirty
  Volume D: is not dirty

  Type "exit" to close the command prompt window.

  You can not enter any command to clear the dirty bit - only chkdsk /r or chkdsk/p can clear the dirty bit.

  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you decide to schedule the chkdsk with error correction during the next reboot, the results appear in the viewing Application event log.  You should look there for the chkdsk log to see what happened and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Date: 04/08/2010
  Time: 11:25:57
  Description:
  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  28017948 KB in 100571 files.
  56540 Ko 10556 index.
  0 KB in bad sectors.
  236440 KB in use by the system.
  65536 KB occupied by the log file.
  10759120 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  2689780 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  The dirty bit fade not until chkdsk /r (or chkdsk/p) tracks clean when the system reboots (as in the example) or when you run chkdsk /r from the XP Recovery Console.

  Many times, the best remedy is to just run chkdsk /r from the XP Recovery Console so you can actually see what it does.  Sometimes, this also seems to be the only way to clear the dirty bit and this way you can see what he does.

  Note that you can not also question the bit of impurity of the Recovery Console and you can't turn off the bit of impurity to enter any command.

  If for some reason chkdsk will not erase the dirty, you can simply say XP never check the volume dirty bit, but who will not fix your fault of potentially hard drive, or it could be the drive just need to have chkdsk run on that (sometimes you need to run it more than once) or you will have to think about replacing the drive.

  If you have a genuine XP bootable installation CD, you can boot into XP from that (even a SP2) Recovery Console CD will work and run chkdsk /r manually from there and repeat until chkdsk /r is clean.

  If you have a genuine XP bootable installation CD, say so and I'll post instructions so you can make a CD of XP Recovery Console and how to run chkdsk from there.   There is no required XP media.

  I wonder why it is that I have never see an engineer Microsoft Support post instructions on how to make a bootable CD of XP (no XP media required) Recovery Console... probably because there is no KB article for them to post.

• Disk Defragmenter does not open in Win Vista Ultimate.

  When I click on open it just flashes and disappeared. I can find the icon however

  When you right-click on the shortcut and look at the properties, the target area say % SystemRoot%\system32\dfrgui.exe?

  Can you find the target (dfrgui.exe) and click on that and get to open the defragmentation?

  What is a right click on the drive icon / properties / tools / defragment now has open Defrag?

  See if the fix for the file associations for .lnk (LNK) files help?

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Have you tried another user to see if they have the same problem?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

• Routers Sagem Sky does not connect with Windows Vista. Help!

  Sky Broadband have given me a new SAGEM router as my NETGEAR router broke.  My netbooks running windows 7 connected instantly like having our phones.  My laptop using Windows Vista and will connect but not communicate with the internet.  After almost 3 hours on the phone with the sky and every procedure they have listed I was told by heaven that the problem is with VISTA is incompatible with the Sagem routers and they are unable to help her and I should find a solution through the windows.  I don't quite see how to contact Windows by phone or e-mail in the United Kingdom despite the long navigation of this site!  Can anyone help?  Please?

  Have any sky broadband users managed to use their Sagem router with a Windows Vista computer!

  Start on this page to communicate with Microsoft:

  http://support.Microsoft.com/contactus/?ws=support

  Verify that the country is located in the United Kingdom at the top.

  If Windows was preinstalled by the manufacturer, Microsoft normally refer to them for technical support

• ENVY of HP TouchSmart laptop 15: local disk D is not accessible

  My notebook Nr is: E1P04AV

  MODEL: 15 t - j100 ABA
  Rev: 1962-110
  CCDI: 0982110000405E00000320000

  I get this message when I access to 'My PC' and click on Local drive D: "local disk D is not accessible. The disk structure is corrupted and unreadable. »

  This local disk D is partitioned with local disk C. The two units are on SSHD, 1 TB, Seagate asa series drive.

  A 24GO SSHD is also installed with 1 TB HARD drive, but the SSHD is not visible in WIN10 in 'My PC' (or, indeed, it is this local disk D?).

  During each reboot, a message appears: "fix local disk D." But the local disk D does not seek redress.

  I just finished installing WIN10 and spent the day to reinstall all printers, scanners and software (with hindsight, I shudda treated first with this corrupted local disk).

  I'm going to local disk likely damage C which has the OS WIN10 on him (I guess), if I reformat local drive D? I would like to reformat ALCO D drive while in WIN10 (not in dos prompt mode).

  FOR INFO:

  My fingerprint reader has not worked in the month. It stopped working after I installed the update of the driver.

  Until I loaded WIN10, I tried to restore my inoperative SimplePass fingerprint reader by loading the newer driver for that I downloaded updates from the HP driver.

  Immediately after the installation of the driver SimplePass my laptop crashed with the BSOD on reboot.

  Each diagnostic single HP I ran in Mode BIOS says all readers and all components, everything going ON.

  What is happening with SimplePass driver software?

  I called Softex but no direct technical Support was available. I left a message, no one returned my call.

  I took the chance and selected the option "Format". The 'quick format' restored the local drive D.

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• Disk cache does not

  I use the add-on for the status of the Cache and noticed last week that the disk cache half of it shows 'not yet loaded. At first I thought that the problem was with the add-on, I even uninstalled and re-installed, but still got the same message. Then I realize that the error was because the disk cache is not active somehow.

  The upgrade to 11.0 FF last week, I made no changes to my configuration or installed any new Add-ons in weeks. I have a few additional modules related to the cache that I installed because I noticed this problem, in fact to diagnose this problem. All in their own way reiterates that the disk cache does not work.

  The page about: cache? device = disk is completely blank in my browser. The purpose: cache page only displays the information of the cache and hide offline (i.e. 0, since I have it is off).

  I added a "Cache" folder in my profile, and he has not made a difference.

  No, I did not order my disk cache folder to a different location on my hard drive.

  No, I'm not in navigation mode private unless there is a way to get in without my knowledge. With the menu editor I removed options incognito in my menus for a long time, since I never use it. He has also not checked in Options - Advanced - Privacy.

  Yes, I have checked all the cache-related on: configuration settings. Everything is as it should be activated and assigned to a certain size of the disk cache.

  How can I get this working again? It's a bit missing folder manually add to my profile, and if so, what is the path?

  This behavior is a feature, not a bug. When the "clear history of firefox closing" setting is selected, the option to clear the cache too, the disk cache is completely disabled. See https://bugzilla.mozilla.org/show_bug.cgi?id=709262 for more information.

  It took me a while to understand this one.

• Im trying to load the update of Mac OS x Server combined software and it says that my disk volume does not meet the requirements of the software

  Im trying to load the update of Mac OS x combined Server software on my Mac Pro Tower 10.7.5 worm and it says that my disk volume does not meet the requirements of the software? Has anyone ever come across this problem?

  You are running a Mac OS X Server software? If so, which version?

• My new N210 always show "local oscillator 1074118626 does not lock in time.

  Hello

  About error 'local oscillator 1074118626 does not lock in time', I found the thread as here, but in my case, this error only occurred when I used two N210-newly buy.

  When I put the two side of the transmitter, which takes place the error in writing-VI (niUSRP write data Tx (CBD 2D) .vilocal oscillator does not lock in the allotted)

  When I do them as a receiver, that erroor come once again an insider-VI (nuISRP Initiate.vi)local oscillator block does not lock in the allotted)

  I have replaced those two with the old N210 and the error disappear. Why?

  Thank you ~.

  Hi Libby,

  On the firmware and FPGAS, I always make sure that both of them are updated. Thanks for your suggestion.

  Finally, I found the answer to ' why this problem (local oscillator 1074118626 does not lock in time) has occurred "because unsynchronous LO between the two USRP. I had solved the problem after connecting the two USRP with MIMO cable without any change in the LabVIEW code.

  I do not know why the old USRP didn't need this synch thing... anyway... I am pleased that my problem has been resolved.

• Disk drive does not open. What is a girl to do?

  I've been ripping CDs to music on computer, and now my drive doesn't open. Can you help me solve this problem?

  Hello

  If they don't help then check with the manufacturer of the system or in support of the Drive manufacturer,
  their documentation online and drivers and ask in their forums (if any) on the known issues.

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ===========================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dfrg.inf is missing that is no doubt why Disk Defragmenter does not work. How can I recover it?

  How can I recover dfrg.inf?  It is absent and is probably the reason Disk Defragmenter does not work.

  An alternative Defragmenter that I use is defraggler is a free download at www.piriform.com/defraggler/download/standard

• Logical disk management does not recognize a slave drive

  I installed an internal HD as a slave. The BIOS sees the drive, Western Digital Lifeguard sees the drive (it checks OK) with the appropriate drive letter, PMagic sees the drive before starting, but the logical disk manager does not recognize the drive or the drive letter.

  Using Windows XP, SP3 with latest updates

  Hello

  1. The hard drive is recognized in another computer?

  If this isn't the case, then the problem could be the hard drive itself. If he is found, then the problem is in your computer. In this case, run the diskpart.exe utility.

  Use the list partition command and see if the partition is detected. If so, then I suggest you to format the drive in diskpart.

  However, take a return of all data on the hard drive before the format by plugging it into another computer. Help with backup data, see

  Backup: what, how, where

  http://www.Microsoft.com/protect/data/backup/about.aspx

  To use the Diskpart.exe utility, follow these steps:

  1. type diskpartand press ENTER to open the diskpart tool.

  2. type list diskand press ENTER. A list of available hard disks.

  3. type select disk =[n]

  n s Specifies the number of disc the disc to receive the focus.

  4. type list partition

  This command displays the partitions listed in the table to partition on the current drive.
  5. type select partition =[d]

  This command selects the specified partition and gives it the focus.

   d s Specifies the drive letter or mount point path of the partition to receive the focus.

  6. type format drive: / FS: NTFS/Quick

  For more information about commands, see

  A Description of the Diskpart command-line utility

  http://support.Microsoft.com/kb/300415

  Now you should be able to see the slave drive in Solution Explorer.

• I removed my C drive files/programs to free up space, but disk defragmentation. does not show that I removed as much as I did. What now?

  I deleted my hard C drive files/programs to free up space, but disk defragmentation. does not show that I removed as much as I did.  What now?  THX.

  you could try to run own Manager;

  Click Start > run > cleanmgr.exe

  you could try deleting your temporary internet files.

  Close the browser, open internet options control panel and look for the option to detele the temporary files.

  either by the way, how big is the hard drive?

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• What are the three steps necessary to correct disk cleanup does not not on Windows Vista?

  What are the three steps necessary to correct disk cleanup does not not on Vista OS

  This tutorial to see how id disk cleanup. See if it helps.

  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html