Local remote database configuration

Similar Questions

• Changes of data type of column between the local and remote database

  Please point me the proper documentation, so I can understand what is happening.and how to solve the problem in the short term until we can change the database character set to match the remote database.

  Details:

  Remote database: set of 12 c CARS characters AL32UTF8

  Database local 11g 11.2.0.4 as UTF8 character.

  CREATE TABLE local_table_t AS (SELECT NAME FROM reference_table_t@remotedb)

  the NAME column in reference_table_t to remotedb is varchar2 (10 byte), it creates this column in local_table_t as varchar2 (30 bytes)

  CREATE TABLE local_table2_t AS (SELECT NAME FROM reference_table2_t@remotedb)

  the NAME column in reference_table_t to remotedb is varchar2 (10 char), it creates this column in local_table_t as varchar2 (30 char)

  This same problem also happens with views materialized from the remotedb.

  Thank you

  Dave.

  Found note size double or triple column when using (materialized) views / DEC in a db AL32UTF8 and the dblink pointing to a non-AL32UTF8 db (or vice versa). (Doc ID 1592514.1)

  that answers my question.

  Dave.

• How to use refcursor type returned from the remote database in the local database

  Can anyone say is how they use the refcursor use type returned from remote database in the local database using dblinks.

  See MOS ID 750126.1 doc ORA-24338 when trying to return a Refcursor over a database link.

• remote server configuration question

  Hello
  
  I have my web app works fine on a local apache/php/mysql server. but now I'm doing work on the remote server. so far, no luck. a few questions:
  the connection to the base for my local server has a user id and password. can I use the same username and password for the mysql database remote?
  I understand how to connect the db to the apache server locally (I use port 8080), but I don't understand how the apache finds the right mysql database on the remote server. do I have to use the db connection in the application of dw Panel and modify the connection settings somehow it can therefore be used for the remote server? I noticed that I get an error: the requested URL doglist.php was not found on this server.
  
  Additionally, a 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand.
  Apache/1.3.37 Server at www.counselorone.com Port 80
  
  Thanks in advance for all advice.
  Mike

  David and Gareth Murray.

  Thanks for your help. The last piece was dense enough to me, but I got it. David, I know that you deal with in your book, but you could probably devote a special section, its that delicate. The nuts and bolts of what I've done is...
  1. to develop my unconscious site at the remote server, including making local database connections. Because microsoft IIS stored in my own way, I changed the port of Apache on 8080. After reading David's comments, I think that its smarter to simply not bother to change the Apache port and manually turn off the IIS application. OR, you can go back once you have created the site and edit your config file Apache backwards to port 80, because you will need the localhost, not localhost: 8080 to connect to the remote server. To avoid pulling the hair, just to deal with the default configuration of apache on port 80.
  2 hire a remote hosting company. I use the server range, although I have not been with them long enough to give a thumbs up or thumbs down.
  3. put the local site on the remote server. I used public_html to store my files.
  4. download the remote server to connect to the database. This last part seemed to require a few things, which were not obvious. Following the advice on this forum, I went to the remote site and note the username, password and database name. (these are NOT the same as my local site). I then copied/renamed my database on the local site to match with the prefix than the remote server has put on my remote database. For example my db was named test1 locally, but the server named wwwcoun_test1, so I renamed it which.
  5. I tried to establish a connection to the database with the new names. It worked. my understanding is that everything we try to do here is set up the connections correctly. you're dealing with loading data in the database with phpmyadmin, a great time-saving tool.
  6. I went on site remote and typed in the url for files downloaded to see if they would connect to the database. they did it.

  That's all. Hope this story helps the next person who needs help.

  Yet once again, thank you very much to those who responded. I appreciate your support.

  Mike

• Setting for the remote database ACS 5.2 problem

  Hi all

  I installed ACS 5.2 device and try to backup report database (MS SQL Server 2005) remotely using remote database settings.

  But the database is empty, and the task in the Task Scheduler is failed.

  So I check MonitoringAndReportingScheduler.log and found the log message in the attached file.

  I try to find answer to Cisco community support, but found nothing.

  But I googled an article almost the same condition as mine.

  http://www.experts-exchange.com/Microsoft/development/MS-SQL-Server/SQL-Server-2005/Q_26931183.html

  I wonder what the database configuration should I change to meet the requirement of this backup of report.

  Because there is nothing on the database in the ACS configuration guide.

  Is anyone successfully using this function?

  What does ".

  I changed my ranking of Latin SQL database SQL, and his work. "in the article mean?

  Thanks in advance.

  Hi, Mason,

  It is very probably due to the CSCtk83179 ACS 5 export remote DB SQL view does not.

  You must wait ACS patch 7 for ACS 5.2 or 5.3.

  Cheers, Irina

  ---

  PS: Please, note the useful messages!

• remote router configuration with EzVPN NEM by VPN

  I have the following scenario: Some 836 routers Cisco EzVPN network are connected to a hub VPN 3005 in the main façade.

  The work of LAN-to-LAN connection and I can also telnet via the VPN from a PC to the main façade of a router to a remote site using the address LAN IP of the remote router as a destination. But does not work for example do a "copy run tftp" on the remote router to the LAN of the main façade.

  My questions now are:

  Is it possible to transfer the remote routers configuration file or via the VPN IOS image between the remote router and the LAN at the main façade?

  And, if possible, how do we?

  Thanks in advance

  Mark

  When you make a "copy run tftp" from the remote router, it goes to the source of its external interface TFTP packets, not its interior. The external interface to your local network packets are NOT included in the list of packages to be encrypted, and therefore they lose.

  You must specify the router to the source its TFTP packets from the interface IP address inside, then these will be correctly encrypted and sent through the tunnel.

  The following command should do the trick for you:

  IP tftp source-interface

• Connecting to a remote database (slowed down) with the password file authentication

  Hi all
  
  I was wondering if it is possible to connect to a remote database is stopped (idle instance) as user sys with sysdba privileges? It is said in the Oracle book - one to page 210 in the section - operating system and the file password authentication:
  
  Connection with authentication by password file or operating system is always possible, any State of the instance and the database are in and it is necessary to issue commands to START or STOP.
  
  Above indicates that it is possible, but I can't do it.
  
  I managed to connect to the remote database that was in mode nomount (see below for more details).
  
  When I first tried to connect to a remote database (idle instance) using the password file authentication, it gave due to error:
  

  sqlplus sys@ORCL as sysdba

  SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 13:59:28 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the password:
  ERROR:
  ORA-12514: TNS:listener is not currently of service requested in connect
  descriptor of
  
  Enter the user name:
  
  After the start of the database in nomount mode I was getting following error:
  

  sqlplus sys@ORCL as sysdba

  SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 13:48:36 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the password:
  ERROR:
  ORA-12528: TNS:listener: all appropriate instances are blocking new connections
  
  Enter the user name:
  
  Then I added the clause (UR = A) my listener.ora file and after that it work and I was able to connect:
  

  sqlplus sys@ORCL as sysdba

  SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 14:04:49 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  
  SQL >
  
  I have all the entries of necessairly in tnsnames.ora on my local host.
  
  Also, I have no problems when connecting as user sys with sysdba when the DB is open, but can't get it working on an idle instance.
  
  I know I can use OS authentication but want to know if there is a mistake in the book or I'm doing something wrong.
  
  Kind regards
  Dawid
  
  Edited by: 978239 2012-12-21 06:24

  I was wondering if it is possible to connect to a remote database is stopped (idle instance) as user sys with sysdba privileges?

  You can, but you need to statically register the database with the listener.

• Database configuration failed on CentOs 6.1

  After the successful installation of Oracle 11 g XE on CentOs 6.1, I tried to configure using 'configure /etc/init.d/oracle-xe. I configured the ports, password. From Oracle Net Listener passed, but the configuration of the database... step failed. Here are the config/log logs:
  
  [cloneDBCreation.log | http://pastebin.com/HUuWYxxs]
  [CloneRmanRestore.log | http://pastebin.com/6MxnvPXP]
  [postDBCreation.log | http://pastebin.com/YdicyG5r]
  [postScripts.log | http://pastebin.com/THfgEdbh]
  
  I don't really know of these scripts where could be the problem. Thanks for the replies.

  my name is sanjunbLin and sanjuronbLin ping output "ping: host unknown sanjuronbLin.
  and what I have in/etc/hosts:
  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  If something wrong with that? What should I do? THX.

  Yes, your host name is not available, not even locally.
  You it could add to the list of 127.0.0.1 assign your return address of local loop, but this would restrict access to your machine only. If you want to access your database from another computer, you must have a static IP address for your machine. This can be affected by a static DHCP rule or by giving your network card a fixed IP address. In both cases, we must add that the IP to your/etc/hosts and give it the name of your machine, so it can be resolved.
  By example, if your machine has an internal IP 192.168.1.123, your/etc/hosts should look like the following:

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
  ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
  192.168.1.123 sanjunbLin
  

  After you add this kind of entry, you should be able to restart your database configuration and to go further. If no other requirements are not present, it will end successfully.

  -Udo

• Remote database server and repository of OME

  Do we need a local repository when using OpenManage Essentials?  When I go to the Source of the catalog and choose ftp://ftp.dell.com/catalog/catalog.cab does this mean that I download the latest firmware and drivers directly from Dell?  If so why do need me a local repository?

  Also how can I see what the remote database server?  I know we have an OME DB server but I do not see where to OME he made reference to what database server, it is connected to.

  Hi Mike,.

  It is not necessary to have a local repository when using OpenManage Essentials. Once you select the FTP option, you get the latest firmwares and drivers directly from dell. Local repository is an alternative solution in case you do not want to download the firmwares of FTP every time, or if you do not want to connect to the internet.

  You can find your server of remote database from the details of the registry:

  You start Regedit > HKLM > Wow6432node > Dell Computer Corporation > Dell OpenManage Essentilals > Database

  "In"database ", the value under" "server" is the name of your remote database

• ORA-17629: unable to connect to the remote database server

  Hello
  
  I have put Dataguard in place with primary and 1 physical standby for learning/test database:
  
  I do NOT plan the unloading of RMAN backups on the physics of the day before.
  
  Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
  I get the following error:
  ---------------------------------------------------------------------------------------------------------------------
  RMAN > catalog resync db_unique_name all;
  from full resynchronization of the recovery catalog
  full complete Resync
  resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
  ORA-17629: unable to connect to the remote database server
  ORA-17628: Oracle 17629 error returned by remote Oracle Server
  ------------------------------------------------------------------------------------------------------------------
  Configuration of RMAN for the main proceedings are the following:
  
  RMAN > show all to db_unique_name asttest;
  
  RMAN settings for database with db_unique_name ASTTEST are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  Configuration of RMAN for instance physical standby are:
  
  RMAN > show all to db_unique_name asttestb;
  
  RMAN settings for database with db_unique_name ASTTESTB are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  ----------------------------------------------------------------------------------------------------------------------
  
  When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)
  
  However, missing datafile scenario does not work on the physics of the day before.
  Here are the steps I followed:
  ********************************************
  1 renamed a file of physical data - in standby mode:
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf
  
  bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old
  
  
  2. restore the datafile (find the data file # view v$ recover_file):
  RMAN > restore datafile 5;
  
  
  
  From restoration to 5 October 11
  
  Segmentation fault
  
  
  3. in spite of the error, published "recover datafile command.
  
  4 RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  allocated channel: ORA_DISK_1
  
  channel ORA_DISK_1: SID = 10 type of device = DISK
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:00:40
  
  RMAN-06094: datafile 5 must be restored.
  
  
  5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
  bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.
  
  rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03
  
  bash - $3.2 ls - ltr
  
  Total 159096
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf
  
  
  RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  using channel ORA_DISK_1
  
  
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:01:59
  
  RMAN-06067: RECOVER the DATABASE required with a backup control file or created
  
  
  6. of course RMAN commands have failed to restore the missing data file;
  So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
  *********************************************************************************
  
  Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.
  
  The documentation I want to talk to is here (1 paragraph):
  
  [http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]
  
  
  Any pointers/direction and advise is greatly appreciated.
  
  Best regards
  NK

  I got it!

  /home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: PRIMARY (DBID=1562898590, not open)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  resyncing from database with DB_UNIQUE_NAME PRIMARY
  starting full resync of recovery catalog
  RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
  full resync complete
  

  If the necessary connection string a target/sys and a catalogue

  RMAN target sys / catalog /@rcatalog

  I did my standby

  Will try the primary

  Best regards

  mseberg

  Work on both. Great question!

  connected to target database: PRIMARY (DBID=1562898590)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  starting full resync of recovery catalog
  full resync complete
  
  resyncing from database with DB_UNIQUE_NAME STANDBY
  RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY
  
  RMAN> 
  

  Published by: mseberg on October 7, 2011 14:16

  Thanks a ton for sticking to it. I'll add this little thing to my web site.

  Published by: mseberg on October 7, 2011 14:22

• How to select data using the same remote database column name 3

  Hello
  
  
  Can anyone help me on how to get the data with the same remote database column names 3 and a unique nickname.
  
  E.g.
  
  SELECT *.
  B.SID, b.status, SUM (b.qty) qantity MAX (b.) date_as_of
  Of
  * ((table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) has, *)
  (* (table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) b). *
  WHERE b.dept = 'finance '.
  AND a.position = "admin".
  AND a.latest = 'Y' AND (b.status <>"MLT") AND b.qty > 0;
  B.SID GROUP, b.status;
  
  NOTE: the instructions "BOLD" is just an example of what I want to do but I always get an error beacause of ambiguous column.
  
  Thanks to advnce. :)
  
  Published by: user12994685 on 4 January 2011 21:42

  user12994685 wrote:

  Can anyone help me on how to get the data with the same remote database column names 3 and a unique nickname.

  Not valid. This makes no sense and breaks all the rules of scope-resolution. And if it is in a single database, or uses tables in databases, is not relevant.

  Each object must be particularly well identified. If you cannot do this:

  select * from (table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) a
  

  3 objects cannot share the same alias. Example:

  SQL> select * from (dual, dual) d;
  select * from (dual, dual) d
                     *
  ERROR at line 1:
  ORA-00907: missing right parenthesis
  

  You need to combine objects - by using a join union or similar. He will have to be done as follows:

  SQL> select * from (select * from dual d1, dual d2) d;
  select * from (select * from dual d1, dual d2) d
         *
  ERROR at line 1:
  ORA-00918: column ambiguously defined
  

  However, we need to have unique column in a projection of SQL names - so the join of the need to project a unique set of columns. So:

  SQL> select * from (select d1.dummy as dummy1, d2.dummy as dummy2 from dual d1, dual d2) d;
  
  DUM DUM
  --- ---
  X   X
  
  SQL> 
  

  I suggest that you look carefully at what opportunities are and how it applies in SQL - and ignore if the referenced objects are local or remote, because it has no effect on the basic principles of scope-resolution.

• Remote server configuration problem

  The problem I have is that the various dialog boxes multiple paths in the configuration of the remote server seem rather amibiguous. I tried what seems like every combination of remote and local access roads, as well as various url strings. Any combination I can't get the file to resolve a URL that works.

  Our current development configuration consists of a central server running Windows 2008 Web Server and ColdFusion 8.0.1. There are three of us using the machine, each developer has their own part on it. We each have our own set of virtual servers running from the share, through IIS on the server.

  This has been a great Setup for us because it allows almost double environment for our production configuration. However, I can't for the life of me get a remote server configuration works completely. I have a machine of secondary dev I use where I'm running CF9 locally, and it works perfectly (I am aware of people who say that eclipse doesn't really want you develop remotely). We will move our server main dev CF9 immediately, and we want to keep the centralized server dev, remote server seems how to configure things.

  It seems that the best scenario is to set up a server for each virtual server I set up. I would set a maximum as in the dialog box:

  General settings
  Server name: foo - site.com

  Host name: dev1.foo - site.com

  Other parameters

  Web server port: 80

  RDS username: my user name

  RDS password: my password

  The remote server settings

  Naming port: 2910

  User name: username admin-server

  Password: password-server-admin

  Document root: (it is a source of confusion, does she want a url? a local file as my drive path mapped "Z:\) » ? or the physical path on the server 'C:\webroot\ '? Could be a path from my eclipse installation? Also, he wants a global path? "or connected to this server config?)

  Mappings

  Local path: (Once again, similar confusion... If it is local to me, or the server? or maybe a url?)

  Remote path: (If this should be a url, and if so does an absolute url for the local path listed above? And this she the Local path is the root of the virtual host, it must then be the same as the document root [which doesn't seem to work]?)

  Install Extensions

  Root Web server: (If it's a physical path? should be related to Eclipse on my machine? or from the server?)

  Installation location: (It would depend on the web root of remote server of course)

  I keep trying different things, and end with either the CF for a project server settings telling me the project exists outside of the root of the web, or sample that url looks like [ http://[hostname]/[projectname] .

  Any help would be greatly appreciated.

  The document root must be a physical path on the remote server, for example 'C:\webroot '. This is the path on the remote computer and the path not mapped on the computer on which the CF Builder is installed.

  In maps, local path is the path on the computer on which the CF Builder is installed. Path remote is the path on the remote machine and not the URL.

  for example if CF is installed to D:\Coldfusion on the remote computer and the local computer (where CF Builder is installed) you have the files in C:\ColdFusion, then when you configure the remote server, you must define the root of the Document to D:\Coldfusion\wwwroot and then you must create a map with local as C:\ColdFusion\wwwroot path and remote as D:\ColdFusion\wwwroot path.

  CF Builder uses this information when you preview files and when you debug a file.

• How to select data from a remote database table?

  Hi friends,
  
  I think I've seen before a sqlplus program that can select data from a remote database table?
  
  Witnessed: IP, SID, PORT
  
  The following is correct?
  
  (I am connected to a local database)
  SELECT COUNT (*) IN THE EMP@IP:SID/PORT;
  
  
  Thank you very much
  
  
  Ms. K

  Salvation;

  I think, that you can create dblink wihtout any problem yet, it's a PROD. After your selection, you can drop dblink

  Respect of
  HELIOS

• Database Configuration utility - huray? :-/

  Hello (again, sigh).
  
  I want to install PeopleSoft FCM 9.1 and Yes, having no experience with the installation of PeopleSoft I decided to use the database Configuration utility, using the article provided by Nicolas Gasparotto as a guide:
  http://Gasparotto.blogspot.com/2009/12/DB-Wizard-850-for-Oracle-on-Linux.html
  as well as the Oracle Documentation. In the guide above, I should be up to step 9.
  
  This is the log that I get after failing to create the database:

  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 15:39:29 2010
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> spool createdb.log
  SQL> 
  SQL> startup nomount pfile=$ORACLE_HOME/dbs/initFC91DB.ora
  ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
  ORA-48140: the specified ADR Base directory does not exist [/u01/app/oracle/product/11.2.0/dbhome_1/dbs/<ORACLE_BASE>]
  ORA-48187: specified directory does not exist
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 1
  SQL> 
  SQL> create database   FC91DB
    2        maxdatafiles  1021
    3        maxinstances  1
    4        maxlogfiles   8
    5        maxlogmembers 4
    6        CHARACTER SET UTF8
    7        NATIONAL CHARACTER SET UTF8
    8  DATAFILE '/oradata/FC91DB/system01.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    9  EXTENT MANAGEMENT LOCAL
   10  SYSAUX DATAFILE '/oradata/FC91DB/sysaux01.dbf' SIZE 120M REUSE AUTOEXTEND ON NEXT     10240K MAXSIZE UNLIMITED
   11  DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/oradata/FC91DB/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT     640K MAXSIZE UNLIMITED
   12  UNDO TABLESPACE "PSUNDOTS" DATAFILE '/oradata/FC91DB/psundots01.dbf' SIZE 300M REUSE AUTOEXTEND ON NEXT  5120K MAXSIZE UNLIMITED
   13  LOGFILE GROUP 1 ('/oradata/FC91DB/redo01.log') SIZE 100M,
   14            GROUP 2 ('/oradata/FC91DB/redo02.log') SIZE 100M,
   15            GROUP 3 ('/oradata/FC91DB/redo03.log') SIZE 100M;
  create database   FC91DB
  *
  ERROR at line 1:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session ID: 0 Serial number: 0
  
  
  SQL> spool off
  SQL> exit
  Disconnected

  OK so Oracle is not available, but:

  [oracle@vm-psfin91-db InstData]$ sqlplus SYS/system@SEED as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 15:46:49 2010
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL>

  The SEED is just a small database I created earlier to test connectivity between my servers - just a little crutch for me to see at least some progress. But it shows that Oralce is available, is it not?
  This who can I check/recheck?
  
  Looks like I'm starting to be a regular here on the forums boast help :D
  
  Thank you in front of me,
  Honza.

  These scripts are coming within the installation of the Application (HCM in your case) under $PS_HOME/scripts/unix, it seems that you missed this step and installed only Peopletools.

  Nicolas.

• Reference to the remote database

  Is it possible to create a foreign key to a table where the primary key is in the remote database?
  Remote database is related to the local database?
  
  Thanks in advance!

  Hello

  Actually, no. You create a trigger (before insert, update, delete) to maintain a referential constraint.

  Kind regards

  Thiago Hyppolito