Local vs remote

Similar Questions

• How to connect the local and Remote Desktop (Android OS) application simultaneously without one shot the other in the login screen?

  I want to connect to my local office via the remote desktop connection, but keep both connected at the same time without being local or remote kicking each other in the bridge/connection between the two. I tried to download and patch the termsrv.dll using UniversalTermsrvPatch - x 86 .exe for Windows Xp 32-bit SP3 compatibility. But still... Settings app may prevent 2 to be connected at the same time? If so could Microsoft please update their app. Any suggestions...

  Try this link for desktop connection xp remotely.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=7208

• Navigation for the AVG firewall Windows XP - network sharing and occasionally be blocked due to uknown UDP outgoing local traffic remotely different ports... Repeatedly enters FilterDevice in the firewall log

  Various involved Ports:
  Local: 257 remotely: 513
  Local: 513 remotely: 6146
  I also saw port 259 and a few others...
  The firewall settings work for various other users, but seem to don't like is not something in my configuration.

  As a member of a domain running Windows XP Pro SP3
  When it blocks the traffic, they are always directed to a remote IP address of a domain within my local network controller. I uninstalled a lot of applications, and made sure I have no services for unix/linux installed.  For a bit, I thought he may have something for security certificates because my computer and user accounts are configured with our local CA... I doubt, however, that is related...

  I also know that my domain name is not the configuration as tight as we would like to see because we had to reduce some of the security settings for old Windows 98 and AS / 400 systems.  So I remember an old key "reg" which might not help:
  Location: HKLM\System\CurrentControlSet\Services\lanmanworkstation
  \Parameters
  Key: enablesecuritysignature
  Initial value: 0
  New value: 1
  This changed seemed to help but then after another it reboot started appearing again...

  Amaranth Hello,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the area and would be better suited to the TechNet Forums community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Local and remote to the same virtual machine replication?

  Is it possible to configure replication for a virtual machine to replicate locally and remotely?

  For example:

  ServerA is my server I need to replicate.

  I set up replication for this VM ServerA to storage replicated in the same site (local)

  I opened the replication again for ServerA VM and I can only see/manage this replication.

  I would like to reproduce ServerA VM offisite in a remote cluster of VCenter for DR purposes.

  
  

  Is this possible? What I am doing wrong?

  same source VM cannot be replicated on the two sites with vSphere replication targets.

  If you use replication level storage table between the source to the target and the second replication, you use the replication of vSphere, it would be a different story.

• logical standby local and remote physical standby

  Dear all,
  
  My version of the database is 10.2.0.1.0 (production) and the x 86-64 OS Version Red Hat Enterprise 4 Linux operating system
  
  Here's my configuration details:
  
  Rprimary database: two-node RAC
  
  LOCAL database backup database: autonomous
  
  Database watch remotely: two node RAC
  
  So, my question is, I want my local DR physical to convert logical standby and
  
  Remote DR will work as physical sleep as it IS.
  
  
  
  SQL > EXECUTE DBMS_LOGSTDBY. BUILD
  
  Will after running the statement above in my primary database production there be any performance HIT.
  
  And another important thing is that my statement above, should not affect my remote physical Dr.
  
  Just the local DR should get converted to logic of the standby database
  
  
  Thanks and greetings
  Yvon Das

  Yvon says:
  Mr President, thank you very much for your answer...

  Actually in my case I want to be a logical and physical database to aid in total. What I'm trying to tell you, it's that.

  We have already two CARS physical distance DR nodes and a physical local autonomous local DR, a * nd we want to convert the local logical physical DR DR *, * this means I want to keep my DR RAC as physical standby*.so, when we will realize the package on the primary database

  exec dbms_logstdby.build;

  It will cause no problem for my CAR remote physical DR.

  Only local DR must be converted into logic.

  Thanks and greetings
  Yvon Das

  Published by: Yvon March 4, 2013 12:17 AM

  I understand your question completely, you can convert logical physical standby standby either locally or remotely. By running the package it will not impact any performance on the primary production database. By running the package SQL apply will be activated.
  There will be no problem with it. Again, you can have physics or logic of Eve in the same configuration of data protection.

• When you expand to show the local and remote sites in DW CS6 how local to be left?

  When you expand to show the local and remote sites in the previous version of DW, the type of files (local or remote) selected when you see do not both, automatically came on the left.  I liked local when I'm editing and when I'm ready to download I expand to see the two premises remotely.  Before, the one you selected, in my local case, was always displayed on the left.  In CS6 when I local selected before I develop, the local is now right and distance on the left. For me, this is not correct.  I find that having local on the works of best left to me as reading, left right, I want the room on the LEFT, so I put the update on the left of the remote control on the right.

  in DW CS6-> How to get the local to be on the left?

  Edit > Preferences > Site

  Change the right to the left on the top.

• What is the best way to work! Local or remote...

  I work with Dreamweaver for about 4 months now, but I'm hard-pressed to find how the more preductive to work.

  You work in the local or remote view.

  With local all links with all images need to be changed when goes live, but it's a lot of work to have to go through all the pictures again.

  What do guys do?

  If your link paths work locally at the premiere, but doesn't work on the remote site, there is definitely something wrong with your site definition.

  The site root directory should not appear in your local files Panel.  It must be set in your settings of remote server only.  See screenshot:

  

  Nancy O.

• Local and remote server reversed in CS5

  I've just upgraded to Dreamweaver CS5 of CS3. I usually download files from local to a remote server by clicking on the button "expand to display local and remote sites" and drag the file on the local server to the file on the remote server. In CS3, the local server is on the left and the remote server has been right in the expanded view. In CS5, it is reversed, with the local server on the right and the remote server on the left. Recently I accidentally did drag a file to the remote server on the local server, crush a lot of work, I'd just do it, because I was used to the servers being on opposite sides. Very annoying, to say the least.

  Anyone know why they did this way in CS5? Is it possible to move the view so that the local server is on the left and the remote control is on the right in the expanded view?

  Hello Sarah,.

  You can change locals and remote to your wish

  On Windows:

  (1) go to the button Edit on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  On Mac OS

  1) go to Dreamweaver on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  I enclose the snapshot of the Preferences dialog box with the circle where you need to work

  

• Time zone - local and remote server are different

  Hello

  DW CS4.

  My computer and I are in PST and my host is in MST.  When a file is transferred to the remote server, the server gives the timestamp of the local MST.  By example, if I save a file at 5:30, my time and my transfer it immediately, on the remote server it will show 06:30 p.

  QUESTION: This time zone difference will create a problem for DW when turning or synchronization?  FileZilla has an adjustment to account for the difference, but I don't see a framework like that in DW.

  Thank you.

  John

  DW synchronizes local and remote filestamps with precision in different time zones via an XML file: dwsync.xml in a folder hidden _notes.

  It seems to work well most of the time (and you do not normally need to worry) that problems sometimes arise if dwsync.xml files is corrupt, but if you delete it, DW will be re - build it.

  See here for more information:

  Synchronize the files on your sites the remote and

  http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7EA 4a.html

  The problems of synchronization in Dreamweaver CS4

  http://kb2.Adobe.com/CPS/405/kb405835.html

• With the help of local and remote servers

  Can someone point me to somewhere that explains the use of servers the remote and? I have set up a local server (using XAMPP) and also a site remote dev on my hosting server. I'm assuming that I can choose to download files on the local or remote as I wish (local test and publish remotely). Is this the case? Currently, I can't download files on the remote server. When I "put", the files just to go to the location of the test (localhost).

  Any ideas?

  You test locally on XAMPP (or similar) and when ready, download on your remote server. If using could not upload to the remote server, it means that you have not set the remote info in your site definition.

  The only thing you can not download through Put is the database. You must create a database with the same name on your remote server. If you have data that you want to download, you can use phpMyAdmin to export to a .sql file. Then use your remote version of phpMyAdmin to import the data by accessing the file .sql on your local hard drive.

• synchronization of local and remote sites

  Greetings
  
  I created a site on there and then he FTPed to a server to my ISP. The site was working fine until I did a few changes that I note below. When DW and I try to try to get a glimpse in a browser, I am unable to display all the files in any browser as DW is unable to locate the files locally or remotely.
  
  I get the error message is:
  Firefox can't find the file at / _ / _ / _ / _ / ThankYouVeryMuch/Website/tyvmi 3/index.htm.
  
  Changes to the site:
  
  -J' reorganized my folders locally by creating a new root folder. When I tried to add 3 pages, I got several error messages. One of them was that DW did not find the homepage. Another was that it was impossible to create the site map and if I'm not mistaken DW was unable to create cache files.
  
  -My client had a friend add a few analytical Google on the site. This person also created a XML sitemap. Of course, local and web sites were not synchronized so that I was getting error messages more.
  
  -J' then downloaded of the site to a new directory in the new root folder that I created above. This site downloaded my local root directory in Site Manager and is located at ./___/___/___/___/thankyouverymuch/website/tyvmi 3/index.htm
  
  -Here are my current directories for the site thankyouverymuchinc.com:
  
  Site name: thank you very much Inc.
  
  Local: ThankYouVeryMuch
  -> Website
  -> tyvmi 3
  -> index.htm
  -> pages
  
  Remote control: host: ip address
  -> www/htdocs /.
  -> index.htm
  -> pages
  
  Thank you very much
  Marlene

  > ATTENTION: the selected folder contains no home page of the current site.

  Open the site for editing definition.
  Click the Advanced tab to do this faster.

  in the plan section of the site, change the location of this site "homepage".
  It will be the old information with the? in the name of the folder.

  Also, check the section local news-> default pictures folder location if
  you have completed as before.

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• Actions by different default for local vs remote files

  I put the default action for documents for automatic download, I want to keep.
  Is it possible to have different behaviors for local links (file:/foo.pdf), namely opens automatically (for example, using a plugin) instead of 'download' of their new?

  I ask this because I generate a local html file to easily navigate and organize my growing collection of scientific articles, which are stored locally.

  I solved for the moment by creating two different profiles with the corresponding actions of the file. Of course this isn't the best solution, because I need to keep the two instances of the browser running, and I need to use the appropriate forum for local vs navigation remote

• publication order, config to access local server remote-web

  Al hilo mi otro post http://forums.ni.com/t5/LabVIEW/sin-acceso-a-control-remoto-web-publishing/m-p/1497856/highlight/tru... are solved, tengo otro problemilla:

  I have a server local integrated con varios hence donde to banish una scada application runs. Can not get access a control remote, any red ordenador desde (tras varios question fallidos, to consiguio asignandole has the IPv4 cada red useful, the fija del servidor DNS config).

  Well, then be brought desde una conexion externa, claro, pero no con fija the DNS no access or internet tengo acceso al servidor, por direccion http... remote web-publising created por the tool tool. Aunque seguimos investigando, local administrator el y yo creo as cerca, pero momento estamos no hemos dado con the respond.

  What creeis can faltar a mi config, tanto local como labview_v8.5 del servidor del?

  MUCHAS gracias Jorge, por information.

  Todo lo Québec is explica in el link are be habia probado una u otra forma.

  The main problem, I think that is what el servidor is una IP fija, puesto that companies should pay al proovedor telephone what wear ahora esta mas. Además, de dejar el servidor por temas seguridad tal y como esta.

  Logicamente no mi depende, pero to thanks the ayuda.

  No however, TR alguna alternativa en funcion of lo conoces what ha en el Haddad post, comentalo.

  Saludos.

• Changes of data type of column between the local and remote database

  Please point me the proper documentation, so I can understand what is happening.and how to solve the problem in the short term until we can change the database character set to match the remote database.

  Details:

  Remote database: set of 12 c CARS characters AL32UTF8

  Database local 11g 11.2.0.4 as UTF8 character.

  CREATE TABLE local_table_t AS (SELECT NAME FROM reference_table_t@remotedb)

  the NAME column in reference_table_t to remotedb is varchar2 (10 byte), it creates this column in local_table_t as varchar2 (30 bytes)

  CREATE TABLE local_table2_t AS (SELECT NAME FROM reference_table2_t@remotedb)

  the NAME column in reference_table_t to remotedb is varchar2 (10 char), it creates this column in local_table_t as varchar2 (30 char)

  This same problem also happens with views materialized from the remotedb.

  Thank you

  Dave.

  Found note size double or triple column when using (materialized) views / DEC in a db AL32UTF8 and the dblink pointing to a non-AL32UTF8 db (or vice versa). (Doc ID 1592514.1)

  that answers my question.

  Dave.

• Copy a data file to a local diskgroup remotely a diskgroup

  Hi all

  RDBMS...: 11.2.0.4 (64-bit)

  Then...: CentOS 6.4 (64-bit)

  I do a few tests here with transportable tablespaces, and I got stuck in how to copy data directly from a local DG to DG distance in another server. I'm trying to do to make the time as low as possible (I could copy the data file of my DG of a system of local files and after that via asmcmd cp, copy this data file, through cp, for the remote server, but it might take a while with giant data files).

  The question is: is it possible to copy a data file to a local DG to a distance DG (another server) directly?

  Thanks for the attention.

  Hello

  Yes

  You can copy the DG to DG by using ftp.

  http://emrebaransel.blogspot.com.tr/2010/04/transferring-Oracle-files-between.html

  Concerning

• Zend 6.1.0 2012 DB local and remote configuration Windows

  I've installed Zend Server 6.1.0 (PHP 5.4.16 - Apache 2.2.22) on Win 2012 64 bit server. I need to connect to a local Oracle 12 c (64-bit) server and a Remote Oracle DB.

  Zend Server already contains the client libraries (oraocci11.dll, oraociei11.dll, orannzsbb11.dll, orasql11.dll) Oracle and I am able to connect to the local Oracle DB and the remote, but only by using the full connect identifier in the PHP script, for example

  $tns = "(DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = XXX0001)(PORT = 1521))
  (CONNECT_DATA = (SERVER = DEDICATED) (SID = ORAXXX))) « ;
  $c = oci_connect ("XXXX", "XXXX", $tns);

  What I would like is to go through the tnsnames.ora file. I tried to install the complete Oracle 32-bit client and also the instant client for 32-bit, but I couldn't get PHP through the tnsnames.ora. I've set the PATH variable to contain the client libraries at the front and also tried to set TNS_ADMIN env var, but I wasn't able to make PHP see the tnsnames.ora.

  Do you know how can I set things up to make it work?

  Thank you!

  I solved this. It was a very trivial problem, I thought that connecting and in return, the new environment variable arise, instead a full server reboot is required to see the new env var (I set ORACLE_HOME). Very stupid problem, but I'm glad I solved it :-) Always look at phpinfo() to see what vars end PHP.