Copy a data file to a local diskgroup remotely a diskgroup

Similar Questions

• XTTS - problem by copying the data file in ASM

  I test the migration of database from AIX to Linux using the cross-platform transportable tablespaces.
  DB version: source: 10.2.0.4
  Destination: 10.2.0.5
  OS version: source: AIX6.1 - AIX - Based Systems (64-bit)
  Destination: RedHat Linux - Linux x 86 64-bit
  
  I have run the commands before copying the file data to destination below.
  

  EXECUTE DBMS_TTS.TRANSPORT_SET_CHECK('TBLSP1,TBLSP2', TRUE);
  
  SELECT * FROM TRANSPORT_SET_VIOLATIONS;
  
  no rows selected
  
  alter system archive log current;
  
  alter tablespace TBLSP1 read only;
  
  alter tablespace TBLSP2 read only;
  
  expdp DUMPFILE=xtts_exp.dmp DIRECTORY=DUMP_DIR logfile=xtts_exp.log TRANSPORT_TABLESPACES=TBLSP1,TBLSP2
  
  CONVERT TABLESPACE TBLSP1,TBLSP2 
  TO PLATFORM 'Linux x86 64-bit'
  FORMAT '/dataimport/%U';

  /DataImport is a shared file system mounted on Linux server and am able to see the file of data out there. But receive the error below to try to copy the data file on the linux server. Could someone let me know if I missed something / how to fix this error.
  

  $rman target /
  
  RMAN> copy datafile '/dataimport/data_D-DBMGRT_I-3320277811_TS-TBLSP1_FNO-26_05m8miia' to '+DATA';
  Starting backup at 05-APR-11
  using channel ORA_DISK_1
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of backup command at 04/05/2011 10:19:44
  RMAN-20201: datafile not found in the recovery catalog
  RMAN-06010: error while looking up datafile: /dataimport/data_D-DBMGRT_I-3320277811_TS-TBLSP1_FNO-26_05m8miia

  To be honest, I don't really see what you have done in the op, so I can't really comment on. I see you have an export of the TTS, but that's all.

  If you have followed all the list I mentioned (you did write the TTS reading?), then you can try to save the file with RMAN, but I suspect that it does not work. Do you get the error even if you move the shared location (/ donneesimporter) to a local directory on the target area? Maybe he doesn't like the fact that it's a NFS mount (or whatever the proportion is).

  Or maybe it's because you going to 10.2.0.4 10.2.0.5. I have always had the same group of patches and updated once I had plugged the tablespaces on the target database.

• IAM using windwos vista I try to copy a data file to my wile pc usb port copy the cry of power dwon ofter that I do not find the fine in usb and my pc so how do I get this file back

  IAM using windwos vista that I try to copy a data usb port on my pc wile file copy the cry of power dwon ofter that I can't find the fine in usb and my pc so how do I get that file back please answer me

  Hello

  This program allows you to search for and attempt to recover the file to your C: drive and / or your USB Flash drive.

  http://www.Piriform.com/Recuva

  See you soon.

• Is it possible to recover a database with the copy of data files (cp), while the database has been opened?

  Hello

  We know we need to do a backup of an oracle database by using the appropriate tool, in most cases the rman. But we have in our society, a person who helps us with the backup of all the databases oracle we have. Thus, in addition to the rman backups, we do a copy (cp) with the open database of all files in oracle database, (without start backup) including of course spfile, controlfile, etc.. My question is: can recover us my database using this copied data files? or are we just wasting disk space on our backup environment?

  Kind regards
  Melo.

  We're doing a copy (cp) with the open database of all files in oracle database, (without start backup) including of course spfile, controlfile, etc..

  As EdStevens said, it's essentially a backup without value. When you copy files from a backup ' hot', there may be inconsistencies in the blocks of the file as transactions actively edit these blocks while the copy is made. Mechanism of Oracle backups hot managed by users is to put the database or tablespace in backup mode, copy the files, and then the end backup mode. Without this mechanism, the chances of being able to restore from this backup are very, very thin.

  My question is: can recover us my database using this copied data files?

  My question is... have you tested recovery? If the recovery has been piloted, then called the answer to this question. Please read the end of this blog post for more information:

  Blog of Peasland before necessary recovery database backups"

  See you soon,.
  Brian

• copy a data file to a raw device

  Hi all:

  I need to move a file of data SYSTEM of a filesystemto a raw device.

  I stop the database, copy the file

  closing database

  dd if=/oradata/datafile.dbf of = / dev/raw01 bs = 4096 skip = 1 seek = 0

  MV /oradata/datafile.dbf /oradata/bkfile/datafile.dbf

  ln s/dev/raw01 /oradata/datafile.dbf

  startup database

  ORA-01122: database audit control failed file 101
  ORA-01110: data file 101: ' / oradata/datafile.dbf '
  ORA-01251: unknown file header Version from the record 101

  startup of the database, but could not open
  data due to the error: ORA-01251: unknown file header Version from the record 101

  Can we see what else could be wrong with my dd command or any solution

  Thank you

  mutung wrote:

  Of Dear John Watson

  How can I do better?

  Thanks for your response

  You can use dd without skip = 1 argument.

• Problem copying the data file

  Hello

  I'm relatively new to essbase. I'm trying to see if taking the back to the top of the map files, data file and security, can restore us the essbase application.

  I copied the outline of a cube ASO 'A' in another word to say 'B '.

  I'm doing the same thing for the data file. But the problem is that I'm not able to see all the data in 'B' when I got the data. I do not know if what I'm doing is just. Could someone please suggest?

  Thank you

  Bob

  Hello

  Once you copy the contour on different App folder stop and start Essbase and see if you are able to see the dimensions in this app (you must have the otl file and keep the files renamed as database name), open the outline and save.

  Export the data from the first application and import these data files on the second request snack if you want to go with manual steps.

  Am not very sure I have no idea of ASO and it's just my guess.

  Thank you

  Amith

• Copy files from the local PC folder to the VM folder

  I would like to copy files from my local PC file to a Dtx200 (which is the data store for my data center)

  I used the following commands:

  $SourceBuild_ISO = 'E:\fileslist\Image\image1.jpg' #folder on my local PC where I have my vsphereClient installed

  Copy-DatastoreItem-point $SourceBuild_ISO -SAN2:\BHM\BHM_ISO_IMAGE Destination-Force

  where SAN2 is my data storage for my VM

  the error I get is can not find the drive named SAN2

  However if I use the following commands

  Get-data-server store < my VM server IP > -name "SAN2"

  I get

  Name FreeSpaceMB CapacityMB
  ----                               -----------      ----------
  3938452 4766208 SAN2

  now I use

  $datastorename

  = Get-data-server < my VM server IP > store -Nom "SAN2" | New-DataStoreDrive-name datastorename

  Copy-DatastoreItem-point

  $SourceBuild_ISO -Destination datastorename:\BHM\BHM_ISO_IMAGE-Force

  This method works. (New-DataStoreDrive performing a mapping to the real data SAN2 store)

  However, New-DatastoreDrive is an alias for a command (for New-PSDrive) sometimes gives the error that New-DataStoreDrive is not a valid cmdlet and sometimes it works well

  If I want a copy of the files in my local PC file to a Dtx200 (which is the data store for my data center)

  use the following commands directly? Why do I need to map a drive to the data store?

  $SourceBuild_ISO = 'E:\fileslist\Image\image1.jpg' #folder on my local PC where I have my vsphereClient installed

  Copy-DatastoreItem-point $SourceBuild_ISO -SAN2:\BHM\BHM_ISO_IMAGE Destination-Force

  where SAN2 is my data storage for my VM

  No explanation? Suggestions?

  The path to your data store that you must supply the parameter - Destination must begin with a drive of psprovider.

  Try it like this

  New-PSDrive-location (Get-Datastore SAN2) - ds name - PSProvider VimDatastore-Root ' '

  Copy-DatastoreItem-point $SourceBuild_ISO-Destination ds:\BHM\BHM_ISO_IMAGE-Force

  You can also use the readers of vmstore or vmstores.

  These 2 are there automatically after a Connect-VIServer.

  Given these discs start higher up in the hierarchy of vSphere, you will need to fit the destination path.

• Mobile without restarting DATA file?

  Hello
  
  I extended the Tablespace and my error, I added one of the data file in this place: /oracle prododuct /- as shown below. I have not updated + symbol while adding the file, for example, Alter tablespace add datafile '+ DATA01;
  All other data files are stored on DISKGROUP + DATA01.
  
  Can I move this data file to the same location as the other files without restarting the database or anything like that? I saw in log backup script to database auto that all data files are included that I added, but not this one (/ oracle /... / DATA01)
  

  /oracle/app/product/11.2.0.2/db/dbs/DATA01                                                    AVAILABLE                    103809024
  +DATA01/db1/datafile/t.330.778438371                                                         AVAILABLE                    103809024
  +DATA01/db1/datafile/t.329.778438389                                                         AVAILABLE                    103809024

  Secondly, how can I find this location on the machine for example to display the created on DISKGROUP of DATA01/db1/datafile/t.330.778438371 DATA01 data file.
  
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production # RedHat Linux 5.
  With the options of partitioning and Automatic Storage Management
  
  
  Thank you much for the help.
  
  Concerning

  910385 wrote:
  Hello

  Thank you very much for the reply.

  I was about to make according to your suggestions. My concern is that:

  RMAN>
  - Alter database datafile datafile_name offline # OK
  - Copy '/oracle/../DATA01' to '+DATA01'. # OK
  

  My question is: How can I find out the full path of the file after copying to ASM Diskgroup to RENAME THE FILE and makes it again online? # As you said KEEP a NOTE... How would I do it please?

  Once you move your ASM diskgroup data file. Show upcoming prompt RMANoutput. He will say that data is copied to the asm diskgroup and he himself will get you the full path. Just pay attention to coming to rman quick exit

• Engraving of the data files on a CD, how?

  I tried to copy a data file outlook (contacts) on a CD as a backup copy, formatted disk and nothing else happened?

  Now, I get a notification that I have files waiting to be burned to the disc, when I click on the ball of the window that opens displays files and drive but, does not give me the option to burn to disc?

  When I open the CD in outlook, it is empty?

  Did you export you a pst file Outlook contacts > save it to a folder > then go to the folder, click on the pst file > click on burn > insert CD etc etc?

  How to export Outlook Contacts to a pst file:
  http://www.ehow.com/how_6774652_copy-Microsoft-Outlook-contacts-CD.html

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Tungsten T3 - need to DAT file access with address - please help

  I have an old Palm Tungsten T3. The desktop computer with the address information synchronized died and the T3 has lost power (so no more addresses).

  I have a. Backup DAT files with all my addresses. Can someone tell how can I have access to these.

  Palm Desktop 4.1.4e reinstalling did not help because it does not allow me to import. DAT files.

  Can I import this file into any other application or open in Excel etc.?

  Any advice would be much appreciated.

  Thanks in advance.

  You must physically copy the .dat file in the directory of the user on the existing address.dat file.  Find the one with your short hotsync name (i.e. - C:/Program Files/Palm (or PalmOne) / name of your Hotsync/address) and copy the .dat file.

  Make sure that you copy the file and keep another a safe in the case where something goes wrong.  The existing empty address.dat file will be only about 2 k in size.

  Good luck!

  WyreNut

• Tried to copy a data disk to another disk using Power2Go received message Power2Go has stopped working any suggestions?

  Tried to copy a data file to another drive using Power2Go disc.  Received message that Power2Go has stopped working any suggestions.  I tried to uninsall the CyberLink program and reinstall from Recovery manager.  I have a HP with Windows 7 Home Edition computer.

  Hello

  1. were you able to burn the disc before using this software?

  2. you remember to make changes to the computer before this problem?

  3. are you able to burn the disc using Windows Media Player?

  Look for error messages in the event viewer for detailed error information.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Follow these methods.

  Method 1: Check to see if you can burn the disc using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

   

   

  Method 2: You can perform a clean boot that allows to check if other services third party is causing a problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, make sure you start the computer to a normal startup mode.

• Users of readers to save the xml data file

  Hello
  We can e-mail through the form xml data file without its extension drive. It is very good. Instead of emailing, I want just to save the xml data file in my local system.
  What is the syntax to get it? To send email, I usually create a "submit" button and the area of the submittoURL write us mailto:[email protected].
  What to write to save it on the local computer instead of emailing? I tried saveto: C:\NewFolder or fileto:C:\NewFolder. Nothing works. I think I'm missing the good syntax here.
  I know its possible by RE the pdf, you can get using savedataXML(). I want to achieve this goal without the form.
  Thanks in advance,

  Chaitanya

  The best you can do is set up a submitForm action and uses a type mailto URL. This will prompt the user to attach to an e-mail message using their email client or save it to a file.

• Transfer data file on a different drive due to full disk

  I use ORA 10 G in WIndows Server 2003. I got the full disc. the disc contains a tablespace MTB with 30 data files. I intend to transfer some (say 10 files) to the other player. Please tell us how can I do this without loss of data.

  Hello..

  Please tell us how can I do this without loss of data.

  You must either take the tablespace offline or need to close the database.

  (a.) Tablespace offline;

  1 alter tablespace offline;

  2 copy data files to another location

  3 alter tablespace rename datafile ' location/name' to 'nouvel_emplacement/name'; - for all data files

  4. alter tablespace online;

  (b) arret stop of the database, copy the data file at different location, mount the database, and then

  ALTER database rename ' location/file name' to 'nouvel_emplacement/name ";

  [http://www.jlcomp.demon.co.uk/faq/rename_datafile.html]

  Anand

• With the help of local and remote servers

  Can someone point me to somewhere that explains the use of servers the remote and? I have set up a local server (using XAMPP) and also a site remote dev on my hosting server. I'm assuming that I can choose to download files on the local or remote as I wish (local test and publish remotely). Is this the case? Currently, I can't download files on the remote server. When I "put", the files just to go to the location of the test (localhost).

  Any ideas?

  You test locally on XAMPP (or similar) and when ready, download on your remote server. If using could not upload to the remote server, it means that you have not set the remote info in your site definition.

  The only thing you can not download through Put is the database. You must create a database with the same name on your remote server. If you have data that you want to download, you can use phpMyAdmin to export to a .sql file. Then use your remote version of phpMyAdmin to import the data by accessing the file .sql on your local hard drive.

• In Vista, application data file paths are not displayed properly, example C:\users\skywatcher\appdata\local\application data\application data\application data\application data\application data\

  I have a problem with a directory of the user.

  The path is C:\users\skywatcher\appdata\local\application data.

  Application directory data are hidden.  However, by using the command "dir / ah" will show the directory as a 'carrefour '.

  The problem is that this directory is the directory even inside himself to the seemingly infinite nesting.

  in other words.

  C:\users\skywatcher\appdata\local\application data\application data\application data\application data\application data\ etc. until that the path cannot be displayed below.

  A problem with an app I'm trying to run it.

  Y at - it a cure?

  Thank you

  These nested application data files contain any data?  If so, is it the same as that contained in the original folder?

  I would like to treat this situation as a corrupt user profile.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  When he is in the process of copy on the old profile files and folders, I first copy the folder of Application data to another location, just in case the change it causes unexpected problems - just make a copy and put it in your Documents folder for now (you can remove it later if everything works as expected). Remove the nested application data folders (unless they contain information are not not in the main folder - then I would probably copy it in the main folder, and then delete).  This, so that there is only one Application data folder.  Then copy it to the new profile.  You may have problems to access these records.  If Yes, click on properties, advanced security and check if all the user has denied access.  If so delete this entry and you should be able to work with the folder.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.