publication order, config to access local server remote-web

Similar Questions

• Fedora to access VMware server 2 web

  Hello

  I had problems with the interface web vmware server 2. When I first install vmware server 2 on a clean system, it works fine. However, after a reboot, the web interface is more accessible to the general public.

  When I do

  "netstat - anp |" grep vm ' I see port 902 listening however ports 8222 and 8333.

  SELInux is disabled, I also turned to IPtables and ip6tables as well as fedora firewall.

  I tried rerun vmware - config.pl, however this does not resolve the issue. I also tried to restart the management interface and that does not work either.

  When I restart the vmware service, everything seems fine:

  Stop the VMware autostart virtual machines:
  Virtual machines [OK]
  Stopping VMware management services:
  VMware Virtual Infrastructure Web Access
  VMware Server [OK] host agent
  Stopping VMware services:
  [OK] VMware authentication daemon
  Virtual machine communication interface [OK]
  Virtual machine monitor [OK]
  Networking networking on/dev/vmnet0 [OK]
  Detection of network host [OK]
  DHCP server on/dev/vmnet1 [OK]
  Host only networking on/dev/vmnet1 [OK]
  Networking networking on/dev/vmnet2 [OK]
  DHCP server on/dev/vmnet8 [OK]
  NAT service on/dev/vmnet8 [OK]
  Host only networking on/dev/vmnet8 [OK]
  Virtual Ethernet [OK]
  Starting VMware services:
  Virtual machine monitor [OK]
  Virtual machine communication interface [OK]
  Virtual Ethernet [OK]
  Networking networking on/dev/vmnet0 [OK]
  Network invited only on/dev/vmnet1 (background) [OK]
  DHCP server on/dev/vmnet1 [OK]
  Networking networking on/dev/vmnet2 [OK]
  Network invited only on/dev/vmnet8 (background) [OK]
  DHCP server on/dev/vmnet8 [OK]
  NAT service on/dev/vmnet8 [OK]
  VMware Server Authentication Daemon (background) [OK]
  Shared Memory available [OK]
  Starting VMware management services:
  VMware Server Host Agent (background) [OK]
  VMware Virtual Infrastructure Web Access
  From the VMware autostart virtual machines:
  Virtual machines [OK]

  I watched acroos the forums and tried quite a few options, but do seem to be getting anywhere, I was wondering if anyone has any other ideas.

  I use a 64-bit version of vmware.

  Thank you

  Hello

  I had same problem - Fedora 14 64 bit & vmware 2.0.2... and nothing on google :-/

  Because I have not found a solution for this problem, so I wrote this post (my first btw :-))

  After you install vmware (and patch before), everything works well before the first server to restart. After reboot - web access (port 8222 & 8333) has not worked.

  For me, it has worked:

  (1) check if vmware - spend is running (when vmware service is started):

  # ps to the | grep vmware - pass

  --------------------------

  root of 1752 0.0 0.6 50760 225708?        SSL 14:36 0:01 / usr/lib/vmware/bin/vmware-hostd - a d u - /etc/vmware/hostd/config.xml

  (2) If vmware - spend does not, try to run vmware - pass manually (without the-d (demon) parameter):

  # / usr/lib/vmware/bin/vmware-hostd - a u /etc/vmware/hostd/config.xml

  --------------------------

  (there was no mistake as.. libvmomi.so.1.0: no such file or directory)

  (3) copy (or link) libraries starting from/usr/lib/vmware/vmacore/and/usr/lib/vmware/lib/to /lib64/

  # cp /usr/lib/vmware/vmacore/libvmomi.so.1.0 /lib64/
  

  # cp /usr/lib/vmware/vmacore/libvmacore.so.1.0 /lib64/
  

  # cp /usr/lib/vmware/lib/libexpat.so.0/libexpat.so.0 /lib64/

  (4) just try to restart the vmware service or server; I had to run vmware - config.pl new - vmware crashed.

  If this isn't the case, vmware - always come running after you restart, try to rerun manually and wait minute (if it is started).

  I already had virtual machine in vmware, so I got another problem...

  VMware-get started, but just for a minute. After a minute, he wrote something as... out of memory. I tried to rename my vm and vmware has worked well (WebAccess Inc.) ...

  So... Here is the solution to another problem...

  5) simply to stop the vmware service

  judgment of vmware for the service #.

  6) Rename the library libxml2 vmware based

  # mv /usr/lib/vmware/lib/libxml2.so.2 /usr/lib/vmware/lib/BAD-libxml2.so.2

  VMware will skip this library and use a for/lib64 /...

  (7) restart the server and try out it

• Restrict access to the remote computer of single machine or the single IP address.

  Hello

  I have a server on which I want to prevent users from remote session. All I want is to give access to a user or machine or IP and that this machine/user/IP can access the server remotely.
  I tried the below mentioned step and it does not work for me, maybe I'm missing something.
  Control Panel > administrative tools > Windows Firewall with advanced security > inbound rules > Remote Desktop (TCP-In) and I tried every tab scope, users, computers, I am still able to access the server of any filling machine.
  Please suggest is possible I can prevent the other users, I can't create a new user account, I have to share the password what I can do is limited to the single machine/user/Ip address.
  Please suggest.
  Concerning
  Yoann kassoum COULIBALY

  Hi, VC.

  I advise you to post this question in the Windows 7 IT PRO Forum /Networking. This community will be able to find solutions to your problems.

  B Eddie

• Cannot print on my local printer when you use remote desktop to access the server (Server 2008).

  We are struggling to print on my local printer when you use remote desktop to access the server (Server 2008).  Cannot make it work.  Any suggestions?

  Hi EverettBurton,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Customer remote cannot access the server LAN via VPN

  Hi friends,

  I'm a new palyer in ASA.

  My business is small. We need to the LAN via VPN remote client access server.

  I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.

  Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.

  Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.

  Who can help me?

  Thank you very much.

  The following configuration:

  ASA Version 7.0(7)
  
      !
  
      hostname VPNhost
  
      names
  
      dns-guard
  
      !
  
      interface Ethernet0/0
  
      nameif outside
  
      security-level 10
  
      ip address 221.122.96.51 255.255.255.240
  
      !
  
      interface Ethernet0/1
  
      nameif inside
  
      security-level 100
  
      ip address 192.168.42.199 255.255.255.0
  
      !
  
      interface Ethernet0/2
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      !
  
      interface Management0/0
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      management-only
  
      !
  
      ftp mode passive
  
      dns domain-lookup inside
  
      access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
  
      access-list allow_PING extended permit icmp any any inactive
  
      access-list Internet extended permit ip host 221.122.96.51 any inactive
  
      access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
  
      access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
  
      access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
  
      access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
  
      pager lines 24
  
      mtu outside 1500
  
      mtu inside 1500
  
      ip local pool testpool 192.168.43.10-192.168.43.20
  arp timeout 14400
  
      global (outside) 1 interface
  
      nat (inside) 0 access-list VPN
  
      nat (inside) 1 access-list PAT_acl
  
      route outside 0.0.0.0 0.0.0.0 221.122.96.49 10
  
  
      username testuser password 123
  
      aaa authentication ssh console LOCAL
  
      aaa local authentication attempts max-fail 3
  no sysopt connection permit-ipsec
  
      crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
  
      crypto dynamic-map dyn1 1 set transform-set FirstSet
  
      crypto dynamic-map dyn1 1 set reverse-route
  
      crypto map mymap 1 ipsec-isakmp dynamic dyn1
  
      crypto map mymap interface outside
  
      isakmp enable outside
  
      isakmp policy 1 authentication pre-share
  
      isakmp policy 1 encryption des
  
      isakmp policy 1 hash md5
  
      isakmp policy 1 group 2
  
      isakmp policy 1 lifetime 86400
  
      isakmp nat-traversal  3600
  
      tunnel-group testgroup type ipsec-ra
  
      tunnel-group testgroup general-attributes
  
      address-pool testpool
  
      tunnel-group testgroup ipsec-attributes
  
      pre-shared-key *
  
      telnet timeout 5
  ssh timeout 10
  
      console timeout 0
  : end
  

  Topology as follows:

  

  Hello

  Configure the split for the VPN tunneling.

  1. Create the access list that defines the network behind the ASA.

     ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0 

  2. Mode of configuration of group policy for the policy you want to change.

     ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#

  3. Specify the policy to split tunnel. In this case, the policy is tunnelspecified.

     ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified 

  4. Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.

     ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List 

  5. Type this command:

     ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes 

  6. Associate the group with the tunnel group policy

     ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn 

  7. Leave the two configuration modes.

     ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#

  8. Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.

  Kind regards
  Abhishek Purohit
  CCIE-S-35269

• Does really matter what you have on your server remotely to services-config. XML

  Hi there, does really matter what you have on your server remotely to services-config. XML?

  The information not only get cooked in the flex application 3 when compiling on my local computer?

  I don't think it's good!

  If you don't have any config file, you can configure a remote object. The config file manages the default settings.

  If you implement something like

  
  destination = "amf".
  source = 'remoteServiceName '.
  "point endpoint ="http://myDomain/amfphp/gateway.php"
  Fault = "handleFault (Event)" > "
         
     

  It will work!

  Dany

• remote VPN cannot access mail server of asa

  Hi dear.

  I have the router that connect to the asa.

  Internet line to connect to the router so all the nat translation is made to the router.

  router outside the ip:x.x.xx

  router inside the ip:10.0.0.1 interface that is connect to asa outside interface (asa outside ip address: 10.0.0.2)

  my mail server to connect to the DMZ asa.

  DMZ interface ip address:172.16.10.0./24

  mail server IP:172.16.10.10

  I'm twice nat for the ip address of the mail server.

  1.i do to asa.

  static (DMZ, Outside) 10.0.0.10 172.16.10.10

  in this mail server ip 172.16.10.10 translation translating 10.0.0.10(10.0.0.10 ip est un sous-réseau de la plage de connexion routeur et asa).

  second nat to router.

  IP nat inside source static tcp 10.0.0.10 25 25 ext x.x.x.x public ip x.x.x.x

  I have no problem with my nat translation to my e-mail server.

  I have set up remote client vpn to asa and apply crypto map ASA outside interface which is 10.0.0.2

  I do THE static nat router for asa outside ip address.

  IP nat inside source static udp 10.0.0.2 x.x.x.x extensible 500 500

  IP nat inside source static udp 10.0.0.2 4500 4500 extensible x.x.x.x

  I have no problem with the vpn connection. I can connect vpn connection. but I can't access mail server. 172.16.10.10

  What can I do in this situation?

  I should be writing sheep-access list?

  If Yes, how can I write this access list?

  Yes, you must configure access on your ASA sheep-list as follows:

  IP 172.16.10.0 allow Access-list sheep-dmz 255.255.255.0

  NAT 0 access-list sheep-dmz (dmz)

• Filtering of VPN and local access to the remote site

  Hello

  I set up vpn, filtering on all my VPN l2l. I have limited access to remote resources at the local level to the specified ports. It works perfectly.

  But I want to have as full access from local to remote networks (but still retain the remote access to the local level). VPN filter now works as I have two-way with a simple ACL. So is it possible to open all the traffic from the local to remote and all by limiting the remote to the local traffic?

  ASA 5520 8.4 (3)

  Thanks in advance

  Tomasz Mowinski

  Hello

  Well let's say you have a filtering ACL rule when you allow http local network traffic to the remote host

  LAN: 10.10.10.0/24

  remote host: 192.168.10.10/32

  The filter ACL rule is the following:

  FILTER-ACL access-list permit tcp host 192.168.10.10 eq 80 10.10.10.0 255.255.255.0

  I think that this ACL rule would mean also that until the remote host has been using source port TCP/80, it may access any port on any host tcp in your local network as long as it uses the source TCP/80 port.

  I guess you could add a few ranges of ports or even service groups of objects to the ACL rules so that not all well-known ports would be accessible on the LAN. But I guess that could complicate the configurations.

  We are usually management customer and completely different in ASA L2L VPN that allows us to all traffic on another filtering device and do not work in this kind of problems. But of course there are some of the situations/networks where this is not only possible and it is not a feasible option for some because of the costs of having an ASA extra.

  Please indicate if you have found any useful information

  -Jouni

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• Loggin to the administrator of the remote site redirects to localhost on the local server.

  This is certainly news to me. I created a Wordpress site locally and then uploaded to the remote server. For some reason when I connect I get redirected to the local host and the version installed locally in XAMPP. I tried to clear the cache in Firefox, but nothing helped. When Apache and MySQL are disabled in the XAMPP Control Panel, he always tries to redirect to the local server and I get the error "problem loading page".

  Also, strangely, when I disable XAMPP the CSS for the site on the REMOTE server is not displayed! Any ideas short of clear and start over? I can't even to the admin of the site to change the password.

  The fixed. Had to manually change the siteurl value in the table options in the remote database. Thank God...

• Local and remote server reversed in CS5

  I've just upgraded to Dreamweaver CS5 of CS3. I usually download files from local to a remote server by clicking on the button "expand to display local and remote sites" and drag the file on the local server to the file on the remote server. In CS3, the local server is on the left and the remote server has been right in the expanded view. In CS5, it is reversed, with the local server on the right and the remote server on the left. Recently I accidentally did drag a file to the remote server on the local server, crush a lot of work, I'd just do it, because I was used to the servers being on opposite sides. Very annoying, to say the least.

  Anyone know why they did this way in CS5? Is it possible to move the view so that the local server is on the left and the remote control is on the right in the expanded view?

  Hello Sarah,.

  You can change locals and remote to your wish

  On Windows:

  (1) go to the button Edit on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  On Mac OS

  1) go to Dreamweaver on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  I enclose the snapshot of the Preferences dialog box with the circle where you need to work

  

• Time zone - local and remote server are different

  Hello

  DW CS4.

  My computer and I are in PST and my host is in MST.  When a file is transferred to the remote server, the server gives the timestamp of the local MST.  By example, if I save a file at 5:30, my time and my transfer it immediately, on the remote server it will show 06:30 p.

  QUESTION: This time zone difference will create a problem for DW when turning or synchronization?  FileZilla has an adjustment to account for the difference, but I don't see a framework like that in DW.

  Thank you.

  John

  DW synchronizes local and remote filestamps with precision in different time zones via an XML file: dwsync.xml in a folder hidden _notes.

  It seems to work well most of the time (and you do not normally need to worry) that problems sometimes arise if dwsync.xml files is corrupt, but if you delete it, DW will be re - build it.

  See here for more information:

  Synchronize the files on your sites the remote and

  http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7EA 4a.html

  The problems of synchronization in Dreamweaver CS4

  http://kb2.Adobe.com/CPS/405/kb405835.html

• When the local server access security warning

  As I said in another post, I am a software developer with 14 years of experience in the development of the desktop application and a bit of web development.  I'm learning the Flash rather than Flex because it's the environment that I own.

  I'm running my first real Flash/AS3 movie and in it, he attempts to access a server local Apache with this call:

  new URLRequest ("http://localhost:8042 / backend.php" ' ");

  When I run it in the debugger, I get the message of security seen in the first screenshot. I went to settings and added localhost, see the second screenshot, but the safety message persists, even after restarting the machine.

  How I this test code and debug it to get the data from the local web server?  This is really critical, because I'll eventually develop a RIA that retrieves all of its data in this web server.

  Sam

  

  

  in the Settings Manager, click locations to change, add a folder and navigate to the folder that contains the files flash for this project.

• PIX - ASA, allow RA VPN clients to access servers at remote sites

  I got L2L tunnels set up for a couple of remote sites (PIX) for several months now. We have a VPN concentrator, which will go EOL soon, so I'm working on moving our existing customers of RA our ASA. I have a problem, allowing RA clients access to a server to one of our remote sites. PIX and ASA (main site) relevant config is shown below. The error I get on the remote PIX when you try a ping on the VPN client is:

  Group = 204.14. *. *, IP = 204.14. *. * cheque card static Crypto Card = outside_map, seq = 40, ACL does not proxy IDs src:172.16.200.0 dst: 172.16.26.0

  The config:

  Hand ASA config

  access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0

  access extensive list ip 172.16.1.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0

  access extensive list ip 172.16.22.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0

  access extensive list ip 172.16.200.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0

  access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.200.0 255.255.255.0

  access extensive list ip 172.16.0.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0

  access extensive list ip 172.16.1.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0

  access extensive list ip 172.16.22.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0

  access extensive list ip 172.16.200.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0

  card crypto outside_map 60 match address outside_cryptomap_60

  outside_map 60 set crypto map peer 24.97. *. *

  card crypto outside_map 60 the transform-set ESP-3DES-MD5 value

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  =========================================

  Remote config PIX

  access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.0.0 255.255.255.0

  access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.1.0 255.255.255.0

  access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.22.0 255.255.255.0

  access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.200.0 255.255.255.0

  access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.0.0 255.255.255.0

  access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.1.0 255.255.255.0

  access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.22.0 255.255.255.0

  access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.200.0 255.255.255.0

  card crypto outside_map 60 match address outside_cryptomap_60

  peer set card crypto outside_map 60 204.14. *. *

  card crypto outside_map 60 the transform-set ESP-3DES-MD5 value

  outside_map interface card crypto outside

  EDIT: Guess, I might add, remote site is 172.16.26.0/24 VLAN VPN is 172.16.200.0/24...

  What you want to do is 'tunnelall', which is not split tunneling. This will still allow customers to join the main and remote site, but not allow them to access internet... unless you have expressly authorized to make a 'nat (outside)"or something. Your journey on the client will be, Secured route 0.0.0.0 0.0.0.0

  attributes of group policy

  Split-tunnel-policy tunnelall

  Who is your current config, I don't see where the acl of walton is attributed to what to split tunnel?

• Not displaying PHP pages is not the Remote/Web server

  All,

  Be nice, faithful of DW. I'm a n00b this field as a whole and the use of PHP, DW, etc.. I have a few questions... I use ~ 2008 Macbook Pro DW5 and MAMP.

  Put up my site with PHP files, got up a local test and running, got the Games records/requests to look and work the way that I love on my local server. In other words, the site is great locally. Signed up for bluehost to use my remote control, downloaded all the files correctly. BUT, when I went to see my site on the remote server, the php pages that are limited to members only are not displayed at all (HTTP 500 error). I guess that's not a mistake in coding that the pages display correctly on the local, but not the remote (therefore, a DB connection problem). Here's what I did to try to address.

  • Exported local DB, imported remotely (so its structure / named exactly the same apart from the host-insterted characters entered)
  • Activated my IP update remote site host cPanel (my C-class?)

  The first line of PHP code on all these pages of restricted Member begins with:

  <? php require_once('.. / Connections/TBO_Golf.php');? >

  The "TBO_Golf.php" contains:

  <? PHP

  # FileName = "Connection_php_mysql.htm"

  # Type = 'MYSQL '.

  # HTTP = 'true '.

  $hostname_TBO_Golf = "localhost";

  $database_TBO_Golf = "TBO_Golf".

  $username_TBO_Golf = "*"

  $password_TBO_Golf = "*"

  $TBO_Golf = mysql_pconnect ($hostname_TBO_Golf, $username_TBO_Golf, $password_TBO_Golf) or trigger_error (mysql_error (), E_USER_ERROR);

  ? >

  Issue 1) -I'm sure that with the files on the remote server, run the script tries to connect to a 'localhost', which is causing my error. Can I change the settings in the connection file or in the connection window of database to what works for my remote server? I know what they are like a second connection to the remote database (so now I have one for local and remote), I created that I have to "Redo" queries by using the remote connection?

  Question 2) Changes the settings as follows best practices when moving locally proved remotely (and test remote local to) regarding the display of dynamic pages? If not, what is?

  Question 3) In my attempt to research, I read somewhere that DW can't handle multiple database connections at a time. I find it hard to believe, so is it true that?

  If anyone can help, it will be greatly appreciated!

  Thanks in advance!

  SnakeEyez02,

  Thanks for the reply. Very much appreciated!

  (1) according to your answer, it seems that I have just to keep the name of the server as localhost, but just change the name of user and pword to match my remote user profiles?

  (2) re-reading of this issue, I guess I wonder what are some best practices when going from local to remote? I guess the same things like maintaining username/pw for local remote control, import and export, for help. But I was more focused on the transfer of DB connections that operate on local to the remote control. I find that it is not as simple as transferring the entire site, import/export of the DB.

  (3) sorry, wasn't clear on what I meant by multiple databases. He was referring to connect to the local computer and the remote control. It would be in the window "Database". So I run RS against either DB?

  Thanks for the direction on the error log. I think I know where it is on the cPanel, so I hope it will shed light on the issue.

  One last question... When I test the site locally and run off the coast of the local db, recordsets when I publish remotely, should I rewrite the recordsets to make reference to the distance db? Or can I just change the DB login information to access the remote versus local?

  Thanks for your patience!