Localhost instead of the IP address.

Similar Questions

• VimService returns localhost instead of the FULL domain name?

  Hi all

  I'm looking to automate the deployment of virtual machines under vSphere 4 Update 1 via the SOAP using PHP service.  When I ask the vimService.wsdl file, I see the following XML:

  <?xml version="1.0" encoding="UTF-8" ?>
  <!--
     Copyright 2005-2009 VMware, Inc.  All rights reserved.
  -->
  <definitions targetNamespace="urn:vim25Service"
     xmlns="http://schemas.xmlsoap.org/wsdl/"
     xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
     xmlns:interface="urn:vim25">
     <import location="vim.wsdl" namespace="urn:vim25"></import>
     <service name="VimService">
        <port binding="interface:VimBinding" name="VimPort">
           <soap:address location="https://localhost/sdk/vimService"></soap:address>
        </port>
     </service>
  </definitions>
  

  Why is the referenced host here 'localhost '?  Should not the XML continue my code of points my vCenter Server's FULL domain name?  It's throwing me for a loop, because when I try for any transaction on the service established by PHP SoapClient instance, my code expires because it tries to connect to localhost instead of the actual address of my Server vCenter.

  Any ideas would be greatly appreciated.  Even more useful would be a code example using PHP 5.3 SoapClient class (as opposed to nusoap, that I've seen it used, because it is not fully functional under PHP 5.3).  Thank you!

  Hello

  "< soap: address location ="https://localhost/sdk/vimService"/ > in the vimService.wsdl specifies localhost in the address location because the wsdk is generated from the server and the server is localhost to himself." However, the location of the address can be changed. Now, when we're trying to establish a connection to a particular server (vCenter or host), when running, that the location of the address is replaced with the URL that we spend in the VimServiceLocator method getVimPort. In this way, established the connection to a particular server when running.

• I use AOL for email and Firefox 9.0.1. Problem started 2 days ago. Before that I put in the two first letters of an email address and he gave me a list of possible. Now I get "undefined" for each possible instead of the email address.

  There is no problem after updating to Firefox 9.0.1. My contact list always displays as he did before that this problem occurred. When I type the first letter or two of the email address, it used to give me a list of possible. Now t shows just as "undefined" e-mail address when he gives me suggestions for the address that I type in the invoice line. This means that instead of being able to click on my choice in the possible he gives me, I have to go to my contact list, find the name and then click on it if I send email to a person. If it passes in more ways than one, I either enter the full address or use copy and paste from the list of contacts. It is a huge hassle. Any help is appreciated.

  You use like CCleaner cleaning software?

  It is possible that there is a problem with the file that stores the data for the "saved form.
  
  Rename or delete the formhistory.sqlite (more formhistory.sqlite - log and formhistory.sqlite.corrupt, if they exist) in the profile folder of Firefox in the case where there is a problem with the file that stores the data for the "saved form.
  
  Which will remove all the data forms, so you can rename formhistory.sqlite to formhistory.sqlite.sav or move the file to another folder in case you need to retrieve recorded data.
  
  If that worked, then you can delete the files renamed.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Several e-mail addresses in 'writing' works with 'enter' key, but the "tab" key directly takes me in the subject line instead of the next address line.

  Want to key on the tab 'use' to enter several e-mail addresses (like Outlook) but 'tab' key takes me directly to the 'object' after first address auto line. But 'enter' key works fine and it takes me to the next address line. Win 7; TB 31.3.0

  Just updated to 31.4.0 and problem solved

• How can I have a show of name (Harry, phone etc.) device upward in the "devices" section of the Capsule of time instead of the IP address of devices?

  How can I have a show of name (phone Harry, etc.) the device upwards in the section "connected devices" AirPort app for the iPhone and iPad utility?

  Sorry, not the answer you were looking for... but you can not... at least not reliably.

  It's pot luck whether the real device name will be displayed, the IP address assigned to the device will appear. or the MAC address of the device will appear.

  Apple still has not corrected it after many years.

• How to display the URL instead of the name of the tab at the top of the screen?

  At the top of my screen, I see something like "Ask a Question" instead of the www.address which I'm used to copy and paste. Why can't I get the www.adress to the top rather than the name of the tab?

  Hi bgrace,.

  You should try right click in the space next to a label and activation of the Navigation bar and the bookmarks toolbar.

  Hope this helps!

• On some pages, instead of the address of the page on the address bar, I get a mixture of icons (rss, home, print, refresh, search etc.). Downloaded again, but did not.

  On some pages (like gmail.com), instead of the address of the page on the address bar, I get a mixture of icons (rss, homepage, Star, previous-next, print, refresh, search etc.). I can not copy the address or refresh the page. I downloaded firefox again, but it did not work.

  Hello Kadomar, other users have reported that this error can be caused by third-party extensions like Icon RSS 1.0.6, which apparently is no longer maintained.

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot

  Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

• NETGEAR WNR1000v3 - Public IP instead of the private IP address

  Hello

  I moved into a new House and put in place and internet service here. So, I got my own modem + router (WNR1000v3). The router itself works fine and provide internet.

  However, when I tried to access the routerlogin.net OR IP address, the application expires. Which means that I can not set a password to protect my network.

  I called support and thought that my router is giving a public IP address instead of the private IP address. Any ideas how I can reconfigure the router working properly?

  http://www.downloads.NETGEAR.com/files/WNR1000_UM_WW_26Jan09.PDF

  7-12

• What it means that the DNS server instead sends a node adapter directly status request to the IP address?

  What it means that the DNS server instead sends a node adapter directly status request to the IP address involved in the reverse DNS query. When the DNS server gets the NetBIOS name of the node status response, it adds the DNS domain name specified in the WINS - R record the NetBIOS name provided in the node status response and passes the result to the client applicant. ?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• Operations Manager 6.1 5.5 Web client on vSphere link refer to the IP address instead of the FULL domain name

  Hello

  We have a new environment vROps 6.1. Everything works like a charm, except when I get the Web Client vSphere. Hosts and Clusters - monitor - health, I try to click on the "see details in vCenter Operations Manager" and I get sent to the IP address to one of the nodes in the cluster vROps. This translates into a certificate error. We have signed all the certificates for the solution of vROps, but that doesn't help us when the link refers to one IP address. Any way to change the behavior of the link to go instead of the full domain name?

  Thanks in advance for your comments.

  Concerning

  Atle

  Yes, here is a code snippet PowerCLI to do:

  to connect-viserver

  $extMgr = get-view ExtensionManager

  $vRops = $extMgr.ExtensionList |? {$_.key - eq "com.vmware.vcops"}

  $vRops.Server [0]. URL = "https://vrops-fqdn/vcops-ngc.zip".

  $ExtExtendedProductInfo = new-Object VMware.Vim.ExtExtendedProductInfo

  $ExtSolutionManagerInfo = new-Object VMware.Vim.ExtSolutionManagerInfo

  $vRops.ExtendedProductInfo = $ExtExtendedProductInfo

  $vRops.SolutionManagerInfo = $ExtSolutionManagerInfo

  $extMgr.UpdateExtension ($vRops)

  AK

• Form open through the IP address instead of the server name in the URL!

  Hi all

  We have forms 11 GR 2 64-bit with the JDK 7 9 on server update and updating JRE 7 25 on PC clients.

  I m facing problem in one of my customer's PC. Please note that follows;

  http://svr:9001/forms/frmservlet? form = new, it does not open my form and displays the error.

  http://192.0.0.1:9001/forms/frmservlet? form = new, it allows to open my screen successfully without any errors.

  that is when we enter the server name in the URL, it does not open my form. But when we enter the IP address of the server, its ok.

  It must use the name of the server, exactly as it is defined in the global variable, which is used to open reports. Thus, if we use

  IP in the URL address, it opens to all reports.

  This problem occurs in one of my PC, other customer client PC is OK.

  Help please!

  Thanks/regards,

  Dass.

  Hello

  as explained by Sham, but among the 'hosts' file on the local pc not the server and also the other way around

  That is to say

  SRV 192.0.0.1

  It is the local file that will be used to translate the name "srv" in the IP address of the "192.0.0.1' for the network software from the local pc power"watching"at this address.

  So when you ask "srv" the "hosts" file can be inspected and the IP address of the returned '192.0.0.1' as translation

  Stem

• use the ip address in listener.ora does not

  Hello
  
  A strange problem in listener.ora, if I use 'localhost', or the name of the computer, then everything is ok, but when I try to use the ip address, then I got an error ORA-12541: listener TNS:no
  
  the listener.ora file that works well
  
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (GLOBAL_DBNAME = HMIHD)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (SID_NAME = HMIHD)
  )
  
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  )
  
  the listener.ora does not
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (GLOBAL_DBNAME = HMIHD)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (SID_NAME = HMIHD)
  )
  
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.183.7.89)(PORT = 1521))
  )
  )
  
  the only change is to use the IP address of the server 10.183.7.89 instead of localhost and if I change the ip address of the computer name, then its also works well.
  
  The server runs on vistual box, I don't know if the machine vistual causes this problem,
  I just want to confirm: I use the IP directly right?
  
  Thank you inadvance!

  Reacted little after you have validated, but authentication Jives agie and my answer has been lost. Not the first time that I lost OTN due issues Jives or descending OTN responses. Well...

  My response was as follows.

  Your listener begins listening using the host name of the server. This binds the 1521 port to all the IP addresses on the server. A new IP address must be created, which will be also automatically supported and connections port 1521 he will be accepted by the listener.

  The AMT ORCL aliases connect to port 1521 on localhost (127.0.0.1 IP address). As the listener listen to all this server IP addresses, the client connection is successful.

  The listener is then replaced listening on a specific IP address. Now the listener only listening on port 1521 on this IP - and no other IP address of this server.

  The alias of tns ORCL now tries to connect using 127.0.0.1 - and this IP address is now supported by the listener. As a result, the connection of the client fails.

  If the tns ORL connection uses the same IP address as the listener, the connection will succeed. The ORCL alias can either use IP address directly, or a host name that will solve in that intellectual property.

  The basic rules are:
  -If the server name is used, the listener use INADDR_ANY indicator socket and tie the port to all the this server IP addresses
  -If the IP 0.0.0.0 is used, the listener also links the Harbour to all the this server IP addresses
  -If "localhost" or a specific IP address is used, the listener will tie the port to only this specific address and no other server IP addresses

  The client to connect, use one of the IP addresses that the listener is listening. The customer can use:
  -the host name so that the intellectual property (the host name must resolve to the IP address via the file DNS or hosts )
  -l the address real IP itself

  Use the following command in Windows to see what IP addresses and ports, the listening process is listening:
  Netstat-b - n tcp Pei

• I want to copy some addresses in the personal address book to a specific address book without the chore of typing each of them. Dragging moves simply address.

  I want to create specific address (for membership to the club) books. Click on the entry in the personal address book does give not an installation "COPY", and do drag from one to the other removes the personal address book. Is it possible, other than having to retype each address in the new book, which will allow the address to appear in the two books? OK - I know I'm lazy!

  Learn how to use the copy/move techniques and selection of basic computer.
  Hold down the CTRL key while clicking on contacts to select more than one at a time.
  Hold down the CTRL everything to drag and drop to copy instead of move. A plus sign to indicate the copy.

• What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  I get multiple research work emails (E/JS) and ecommerce. Some of them have a "Correct".
  'St. Michael Job Assistance Ministry - JAM' FA (SMJAM-JAM).

  For some reason, however, some of the emails from other sources, downloading the verizon pop3, E/JS server are indicated (wrongly) as having the FA SMJAM-JAM above. This situation prevents my email filters to plug these emails to their appropriate mail folder.

  Also, when the steps in order to transmit emails showing incorrect information of FA SMJAM-JAM, the e-mail is no longer present incorrect information of FA SMJAM-JAM but shows rather the correct information of FA that had been specified on the verizon pop3 server.

  address ROM"(FA) in some emails, when downloading from the pop3 server, is replaced by a 'common' 'FA '. [email protected]

  What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  Hello

  If I understand your problem, I think it may have to do with the addresses stored in your address book. Thunderbird can display the name of your address book instead of the name of the post office, where corresponds to the e-mail address.

  Check your address books to see if you have a bad entry for mail addresses get listed wrong.

  Also check under Tools-> Options-> advanced-> reading & display if you have checked the option to see show it only the names of the people in my address book. If you uncheck this option, the name and the address must be...