located outside the firewall Web server

Similar Questions

• Access outside the firewall APEX

  We have APEX 4.0 on Glassfish and the listener of the APEX. We would like to be able to access the APICES of the outside of the firewall. Can you tell me a few steps on this operation. I found a mention on the APEX site that would be inside the firewall and not external APEX earpiece but that's all.

  You say that you run the listener of the APEX on Glassfish, so yes, APEX listener goes everywhere go to Glassfish.

  Suggestion of Udo is a little different from my second option and could be better. In your current configuration, you have two components - the listener of the APEX running on Glassfish application server and the database that runs your APEX applications. Udo adds a third component, a HTTP server, such as Apache, which is your portal to the applications.

  If you can do:

  the user's browser HTTP > Apache AJP or HTTP >-->APEX Listener on Glassfish Oracle Net firewall > Oracle database (Udo suggestion)
  OR
  the user's browser HTTP > APEX Listener on Glassfish Oracle Net > firewall --> Oracle database (my option 2)
  OR
  the user's browser HTTP >--> APEX Listener on Glassfish Oracle Net firewall > Oracle database (my option 1)

  The key is that the firewall must be configured to allow traffic that will pass through it.

  The advantage of my option 2 or Udo suggestion is that you only allow traffic from a particular server outside the firewall in a protocol specific to a server inside the firewall. Udo suggestion makes this server information less vulnerable on what is inside the firewall and can be more easily used to simple HTML pages. It also makes changes less to your current configuration.

• Cannot connect to the integrated Web server

  I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!

  If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.

  You mentioned that you must change the IP address.  What is the reason for this change?  The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?

  I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection.  You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address.  Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.

• Getting error: cannot run on the development web server configured

  I installed Visual studio 2012 and IIS 7 on Windows 7 Ultimate version. I get the error message 'Cannot run on the development Web server configured' and 'Impossible to run IIS Express' when I tried to run a web application from VS2012. If anyone knows how to fix it please tell me.

  Hello

  It is not a community forum for VS.

  Try the Visual Studio Forums

  Visual Studio development category:
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Don

• Make the remote web server accessible via VPN Site to website

  We have two test sites that are connected by a tunnel IPSEC VPN site-to-site (hosted on a SAA each site) over the Internet. We are trying to set up an environment to test two web applications running side by side. Two web servers are running on the Site of Test 1. We don't have the same public IP available at each site.

  To address the public site 1 unique IP address restriction, we try to install ACL and NAT rules to have 2 Site accept traffic from the internet and send it on the site to the other tunnel. So 1 Web server would accept the ASA 1 internet traffic and Web Server 2 accept traffic from ASA 2 to the other site. Here's a network diagram:

  

  We have difficulties to get this configuration works correctly. Please note that the network 192.168.3.0/24 clients are able to access the servers Web1 and Web2. This question seems to be due to our NAT configuration. This is the type of error, we see on the two firewalls:

  Asymmetrical NAT rules matched for flows forward and backward; Connection for tcp src outside:4.4.4.4/443 dst outside:192.168.1.10/443 refused due to path failure reverse that of NAT

  Our situation seems similar to this post: https://supportforums.cisco.com/thread/2242230

  Any help would be appreciated.

  Hello

  What Karsten said above is true. While it is possible and works, it also means that the configuration is a little more complex to manage. I have done no such features in a real-life network environment and have always used additional public IP addresses on the local site when a server is hosted.

  If you want to continue to move forward with this so here's a few points to consider and the configurations that you need.

  First off it seems to me that the other server will be organized by the local Site 1 so a simple static PAT (Port Forward) must manage the Site 1.

  network of the WEB-HTTP object

  host 192.168.1.10

  NAT (inside, outside) interface static tcp 443 443 service

  And if you need TCP/80 also then you will need

  network of the HTTPS WEB object

  host 192.168.1.10

  NAT (inside, outside) interface static service tcp 80 80

  Now, 2 Site will naturally a little different that the server is hosted on the Site 1 and Site 2 is the public IP address used to publish the server on the external network.

  Essentially, you will need to configure NAT that both makes dynamic PAT for the addresses of the source of the connection to your server Web 2, but also makes the static PAT (Port Forward) for the IP address of the Web Server 2. Additionally, you have to set the area of encryption on the Site 1 and Site 2 to match this new addition to the L2L VPN connection.

  Unless of course you use an existing IP address on the field of encryption in the dynamic translation of PAT for the source address. In this case, it would take no change VPN L2L. I'll use that in the example below.

  The NAT configuration might look like this

  service object WWW

  destination eq 80 tcp service

  service object HTTPS

  destination eq 443 tcp service

  the object SOURCE-PAT-IP network

  host 192.168.3.254

  network of the WEB-SERVER-2-SITE1 object

  host 192.168.1.11

  NAT (outside, outside) 1 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service WWW WWW

  NAT (outdoors, outdoor), 2 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service HTTPS HTTPS

  So, essentially, NAT configurations above should ake 'all' traffic coming from behind 'outside' interface intended to "outside" "interface" IP address and translate the source to ' SOURCE-PAT-IP ' address and untranslate destination to "WEB-SERVER-2-SITE1".

  Make sure that the IP address chosen (in this case 192.168.3.254) is not used on any device. If she is then replace it with something that is not currently used in the network. Otherwise, configure an IP address of some other subnet and include in the L2L VPN configurations on both sites.

  Unless you already have it, you also have this configuration command to activate the traffic to make a U-turn/pin on the ' outside ' of the Site 2 ASA interface

  permit same-security-traffic intra-interface

  Hope this helps

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary.

  -Jouni

• View and redirect USB - Office at initialization outside the firewall

  I've been painting these forums looking for a solution to this problem.  I can connect to my Windows 7 Professional VM without problems via the secure SSL protocol, but after login on the USB tab at the top, it says "initialization of the office."

  Now I have seen and read a lot of posts here, and I am sure that this has something to do with my router/firewall physics.  I put a Client computer on the same local network (inside the firewall) and it loads and works very well, complete with USB Redirection so I know that the actual configuration is fine.  However, when I do the same thing from a computer outside my firewall, it gets stuck.

  After reading the other posts here, I forwarded your port 32111 to my server from view, and that did not solve the problem.  I even went as far as to put the server on DMZ and always the same result.

  So to summarize-, it works very well from a computer on the same local network, but when coming out from the local network, it does not.

  Ports, go to the server to display:

  80, 443, 4172, 32111.

  Could really use a few suggestions here.

  OK, so it seems that your environment from view behind a NAT. Tunneling is probably necessary here (see http://pubs.vmware.com/view-50/topic/com.vmware.view.installation.doc/GUID-0FC59EB4-45DA-4B3C-A611-F6B5597E9F0C.html), you must make sure it is on, then make sure your connection to the server can also obtain the MV Office on port TCP 32111.

• Where can I find the integrated Web server for a Photosmart 7520?

  I want to change the password for direct printing and the touch screen says change in SAP.  Where the built-in Web server?

  The SAP is the built-in Web server. It is the internal Web site created for the printer when connected to a network.

  To access SAP:
  * Get the IP address of the printer from the control panel of the unit
  * Web open favorite, program navigation
  * Type the IP address in the URL bar and press ENTER to access the page

  Let me know if you need more information.

• How to: Perform a Firmware Upgrade using the integrated Web server for HP printers

  Watch this video that shows how to perform an update of the firmware, using the built-in Web server for HP printers.

  Hope this video is useful if you find that it had to update the firmware on your HP printer.

• The test Web server errors

  Hello

  I am attaching an webserver0 output file, would you please let me know how to check this file? Because I get warnings at the end of the file, I don't see any results.

  Please do scroll through the file, on the top, it's error, which I fixed by fixing the machine of workload (Java), but still I am confused about my results, if is good or bad?

  Thank you

  Hardik

  That sounds about right.

  You can use the tilescore.pl file to get the score.  This is a basic step by step (adjust the paths to fit your environment):

  1. open the cygwin shell

  2 cd/cygdrive/c/vmmark/results/webserver\ results

  3. .. /.. tilescore.pl t 1-J - M f d

  -J - M f d flags don't know java, mail file and DB workloads.  There is also a w flag to skip the Web server workload.  You can use these indicators to get scores for partial tile courses.

• Problem with Installation of the Siebel Web Server Extension

  Hello
  IAM trying to install Siebel 8.1 on my pc... In fact its installed successfully... but due to some other reasons (to increase disk space on the C drive) I uninstalled it.
  Clean registry and deleled installation folder files. but when I am trying to reinstall it cannot go further to Siebel Web Server Extension. He stopping at the beginning... and the error is
  "Cannot find table.txt from the previous installation.
  Setup cannot continue.
  java.io.FileNotFoundException:
  "c:\sba\SWEApp\_uninst\eappweb\table.txt (the system cannot find the path specified).
  
  I uninstalled everything that he and cleaned the registry keys as well.
  could you please help me how to fix this error...?

  Hello

  Assuming you are using windows 2003 and you have not installed another siebel server software, go to c:/windows folder, make a backup of the current vpd.properties file, remove it and restart your installation again. file VPD. Properties is created by installshield to keep track of the facilities. It is always good to have a backup in case you have problems installing. Support.oracle.com Doc ID 520528.1 has more information on this file.

  It will be useful,

  Wilson

• to connect to the ColdFusion web server

  I just installed Dreamweaver CS 6 and I would like to configure my web server, but can not find the place to connect to the server.

  Can you please advice how to configure my Dreamweaver to work to connect to the web server?

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  Use F1 help function from DW to know more on how configure your site for remote server definition so that it can do a FTP/network connection at the remote site: what do you mean?

• Does not on the production web server

  With the help of DW, I created a simple flash slideshow.  It works very well in the test, but when I move the page, photos and files to the production server, it does not show.  The first time I tested it on the test server, a message came and said it was installing something.  I think that the web server must have also need this installed but I do not know what it was that installed DW.  Can someone tell me if there is a requirement that I need to install on the web server production or what could be the problem here?

  Like Paula, for best results in these forums, always post a Pointant URL to your live page so we can check for code errors, the paths of files, missing files, CSS, etc...

  In the meantime, things to check:

  1. You have download all files load of server, including Scripts, SWF file, etc.?
  2. In HTML code mode, you see the paths to the files on your hard drive?  Example: file:///C:MyDocuments/...
  3. Your server does support Flash and Shockwave MIME?  Ask your host if you do not know.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• How to delete a selected line using a button located outside the datagrid in flex4 mxml application

  Hi friends,

  I'm new to flex, I use flex4 mxml application, I have my doubts... Help, please.

  My requirement is that I use a grid.i of data data should this datagrid from another window contextual and recorded the details datagrid now, too, I want to remove a record from a data grid

  I use a datagrid. a save button and remove the two buttons are placed outside the grid of data. so once I click on a row of the data grid and click on remove the medium button this record should delete data grid.

  
  All codes suggession and extract are welcome.

  Thanks in advance,

  B.Venkatesan

  Hello

  This code can help you:

  http://www.Adobe.com/2006/mxml"layout ="absolute"viewSourceURL =" srcview/index.html">"

  Import mx.controls.CheckBox;

  Import mx.collections.ArrayCollection;

  Import mx.controls.Alert;

  public var dp:ArrayCollection = new ArrayCollection();

  public void addRow (): void

  {

  var tmp:Object = new Object();

  tmp ["amount"] = 100;

  dp.addItem (tmp);

  }

  public function delRow (): void

  {

  If (dgFee.selectedIndex! = - 1).

  dp.removeItemAt (dgFee.selectedIndex);

  }

  ]]>

  Thank you and best regards,

  -----------------------------------------------------------------------------------------

  Vibhuti Gosavi . [email protected] | www.infocepts.com

  -----------------------------------------------------------------------------------------

• Another discussion to see a comments from the host Web server

  Howdy,

  I ran into something really puzzled. I have windows 7 host machine and two VM. Ubuntu 11.04 is one the other is RHEL7. The fundamental problem is that, since my host machine, I see an Ubuntu apache server and I do not see the server apache RHEL5.8.

  Details. I'm running 8.04 vmware and have reinstalled vmware-tools on every machine after the upgrade. I'm running an internal NAT. The host IP is 192.168.2.1. The Ubuntu IP is 192.168.2.128. RHEL 192.168.2.129. The problem is between the host and the 192.168.2.129 box of RHEL. What's weird, is that I do not see my server apache RHEL host, but of the terminals on both boxes, I can ping another machine by IP address and since I edit/etc/hosts(buried in c:\windows\system32\drivers) I can ping between host and guest by the url "myapp.local" as well. The period of INVESTIGATION were determined by ipconfig and ifconfig on the host and the guest respectively. I watched netstat on the client and do not seem to have anything httpd listens on port 80 on the guest. I'm really at a loss. The Ubuntu box configured the same way works, but the RHEL box fails.

  I don't know if I listed everything that could be of use here, but if someone could chime in with ideas I would appreciate it. In brief

  (1) ifconfig shows URL

  (2) pings may be

  (3) dns is defined in/etc/hosts

  (4) proxy ignore is set in firefox on the host and the proxy reviews configuration to avoid transmission by proxy problems

  (5) web page expires, the server is invisible

  (6) newspapers on the comment server don't watch not demand of the host being considered.

  Thank you

  Danny

  Based on what you said in the OP I would say that you need to properly configure your firewall on the client to allow WWW (HTTP).  If not that something is still not set up correctly and very probably not really a question of VMware.

• Location of the vCenter vCEnter Server Appliance 6.0.0 vs Linux plugin file

  We have a plugin where we were using vCenter 6.0 hosted on a Linux server.  I could get my plugin files in /var/lib/vmware/vsphere-client/vc-packages/vsphere-client-serenity and /import/storage.

  We then deployed a vCenter Server Appliance 6.0.0 our plugin and it has a different directory structure.  The structure of directory changes to /var/lib/vmware.

  Where can I find the folder of vsphere-client-serenity or its equivalent.

  Or plugins to treat device unlike a vCenter 6.0 linux host?

  
  

  Thank you.
  

  I found it in/etc/vmware/vsphere-client/vc-packages/vsphere-client-serenity