to connect to the ColdFusion web server

Similar Questions

• Cannot connect to the integrated Web server

  I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!

  If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.

  You mentioned that you must change the IP address.  What is the reason for this change?  The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?

  I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection.  You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address.  Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.

• TMSXE unable to connect to the Exchange Web Services

  Hi, we have made our upgrade to TMSXE 3.0.1 2 months ago, and we just started to notice that we can add is no longer the videoconferencing units as the TMSXE does not connect to the integrated Web server. There has been no changes on Exchange servers or server TMSXE. Can someone please provide troubleshooting steps?

  Thank you

  The origin of it was a network problem, as soon as the NETWORK load balancing has been taken out of the loop he was working. Not a problem with TMSXE or TMS.

  / Magnus

• connection to the apple id Server error

  My company has just put a package of internet security in place. I get an error message when my computer tries to access iCloud services.  I am ordered to provide my credentials in the iCloud preferences panel and then I get an error to connect to the apple id server.  I can always get my iCloud email in the email client, I can always access iCloud Web site, etc..

  I suspect that the security package blocking traffic specific to the iCloud.  Does anyone have ideas, I can tell the COMPUTER staff to get this working again?  Thank you.

  The error message say?

• Unable to connect to the VMware web service: invalid key file

  Hello

  We have a CPO 2.3.1 who refuses to connect to vCenter (see newspaper excerpt at the end of the post).

  Recently, we changed our server vCenter (part of a 5.1 update).

  We tried the following workarounds:

  • Remove and add all the elements of the platform from the portal using services SE
  • Re import automation packs (4 of the Starter Edition v2.3.1.38)
  • Re on the keystore password

  No change at all...

  Do you have an idea on how to fix this?

  Thank you.

  Kind regards

  Stone

  || 235. 02/10/2012 15:46:21.667 | 6072. WCF: http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord ' gravity 'Error' = >http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxhandling of an exception. . Tidal.Automation.Server.exe Tidal.Scheduler.Common.Communications.CommunicationException, Tidal.Scheduler.Common, Version = 2.3.0.0, Culture = neutral, PublicKeyToken = fba593b23cf207cdthe connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: Invalid keystore. to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)Tidal.Scheduler.Common.Communications.CommunicationException: the connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  || 236. 02/10/2012 15:46:21.667 | 6072. An exception that is not of type rhapsodyexception has been captured while a webmethod call was made.  This exception has been intercepted and generic.

  || 231: 02/10/2012 15:46:21.667 | 6072. EXCEPTION (Tidal.Scheduler.Common.Communications.CommunicationException): The connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  Stack trace: at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. <> c__DisplayClass1c. b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object, Object [], Object [] entries & exits instance)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  You have an invalid key file because the HTTPS certification has changed. You must remove the old keystore file and restart the OPC Server and then reconnect / run something against vCenter.

  It is also possible to host Adatper framework/java problems I've seen often.

  If you need more information, you will need to prosecute TAC with your service contract please. Normally, we try to solve no newspapers on the forums.

  -Shaun Roberts

  CIAC/CPO support team leader

  [email protected] / * /.

• Job-Run: SELFUPDATE, unable to connect to the ConsoleJobStepExecutorService Web service working system.

  Job system failed to connect to the ConsoleJobStepExecutorService Web service. Check the OMS's WebLogic Admin Server for any issues related to Web services configuration that could cause a connection failure.

  Natural logarithm of output

  Hello world.

  I am writing from Hungary, sorry for my bad English. You can read my problem above.

  I'm looking for:

  -Oracle Cloud control 12 c version 5

  -Extensibility / auto update / check updates

  -activity of employment-

  SELFUPDATE_20151111104414

  1 race

  11 November 2015 10:44:14 GMT + 01:00

  SYSMAN

  Refresh updates

  but the message: error log:

  Job system failed to connect to the ConsoleJobStepExecutorService Web service. Check the OMS's WebLogic Admin Server for any issues related to Web services configuration that could cause a connection failure.

  and nothing happened.

  
  

  I would like to download and install the microsoft agent x 64 driver.

  
  

  -I can't find anything on the the red message in the internet or in the google...

  -I'm still a beginner in Oracle...

  -MOS, proxy and the credentials are OK.

  
  

  Please help me,

  Thank you for your co-operation in advance

  László
  

  Hi Courtney lamas-Oracle

  First of all. Thank you very much for your help!

  Yesterday, I was able to find the answer to my problem:

  So:

  1. I used consol secure with sleeve and key_strength 2048 (because there were problems connecting my Chrome, IE11 or Firefox to the Weblogic administration Console and the https certificate)

  2. I refreshed DemoIDentity, jks with certificate of keystrength from 512 to 1024 due to the blocking of the browser.

  The solution:

  sure emctl console - portfolio -key_strength 1024

  Restart the WHO

  I've been careless.

  Everything works fine now.

  LACI

• ORA-17629: unable to connect to the remote database server

  Hello
  
  I have put Dataguard in place with primary and 1 physical standby for learning/test database:
  
  I do NOT plan the unloading of RMAN backups on the physics of the day before.
  
  Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
  I get the following error:
  ---------------------------------------------------------------------------------------------------------------------
  RMAN > catalog resync db_unique_name all;
  from full resynchronization of the recovery catalog
  full complete Resync
  resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
  ORA-17629: unable to connect to the remote database server
  ORA-17628: Oracle 17629 error returned by remote Oracle Server
  ------------------------------------------------------------------------------------------------------------------
  Configuration of RMAN for the main proceedings are the following:
  
  RMAN > show all to db_unique_name asttest;
  
  RMAN settings for database with db_unique_name ASTTEST are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  Configuration of RMAN for instance physical standby are:
  
  RMAN > show all to db_unique_name asttestb;
  
  RMAN settings for database with db_unique_name ASTTESTB are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  ----------------------------------------------------------------------------------------------------------------------
  
  When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)
  
  However, missing datafile scenario does not work on the physics of the day before.
  Here are the steps I followed:
  ********************************************
  1 renamed a file of physical data - in standby mode:
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf
  
  bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old
  
  
  2. restore the datafile (find the data file # view v$ recover_file):
  RMAN > restore datafile 5;
  
  
  
  From restoration to 5 October 11
  
  Segmentation fault
  
  
  3. in spite of the error, published "recover datafile command.
  
  4 RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  allocated channel: ORA_DISK_1
  
  channel ORA_DISK_1: SID = 10 type of device = DISK
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:00:40
  
  RMAN-06094: datafile 5 must be restored.
  
  
  5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
  bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.
  
  rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03
  
  bash - $3.2 ls - ltr
  
  Total 159096
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf
  
  
  RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  using channel ORA_DISK_1
  
  
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:01:59
  
  RMAN-06067: RECOVER the DATABASE required with a backup control file or created
  
  
  6. of course RMAN commands have failed to restore the missing data file;
  So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
  *********************************************************************************
  
  Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.
  
  The documentation I want to talk to is here (1 paragraph):
  
  [http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]
  
  
  Any pointers/direction and advise is greatly appreciated.
  
  Best regards
  NK

  I got it!

  /home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: PRIMARY (DBID=1562898590, not open)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  resyncing from database with DB_UNIQUE_NAME PRIMARY
  starting full resync of recovery catalog
  RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
  full resync complete
  

  If the necessary connection string a target/sys and a catalogue

  RMAN target sys / catalog /@rcatalog

  I did my standby

  Will try the primary

  Best regards

  mseberg

  Work on both. Great question!

  connected to target database: PRIMARY (DBID=1562898590)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  starting full resync of recovery catalog
  full resync complete
  
  resyncing from database with DB_UNIQUE_NAME STANDBY
  RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY
  
  RMAN> 
  

  Published by: mseberg on October 7, 2011 14:16

  Thanks a ton for sticking to it. I'll add this little thing to my web site.

  Published by: mseberg on October 7, 2011 14:22

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• verification failed - there was a connection to the Apple ID server error?

  I am signing in iCloud, but whenever I try, a message appears saying: "check failed, there was a connection to the Apple ID server error" I can't use all the apps, and I tried to restore my iPad and reset my network settings and nothing works. Help, please!

  Try to connect to iTunes and insert it again (I know you talk about audit iCloud, but the signature of and then back into iTunes will ensure that the password that is stored on your device for your ID Apple is correct: settings > iTunes, select Apple ID, click on Sign Out, and then sign.)

  See you soon,.

  GB

• Apple TV 4th generation "audit failed there is a connection to the Apple ID server error."

  Can Hello someone please help me?

  I have a 4th generation Apple TV and I can't seem to accept my apple ID and password.

  That's what I've done so far:

  Chosen English (United Kingdom)

  Chosen UK

  Tried to associate a device with the establishment (iPhone 6s)

  Has no more than 10 times, even if the password is correct

  Error message that appears is "audit failed there is a connection to the Apple ID server error."

  Tried the manual log, same error message.

  Tried the manual paper but this time I skipped the Apple ID Login, to see if I could connect via iCloud and ITunes manually in the menu, same error message appeared.

  It recognize my wifi, so this isn't a problem. Restored to factory settings.

  Connected on my computer apple laptop not and connected on iTunes Music store to enter the password and verified it was OK, write down each letter/number, I typed the.

  Tried to pair the device several times over, has kept getting the same error message. The manual bit once again, same error, again restored factory settings.

  Went on my iTunes on my phone account and disconnected, and then reconnected in.

  Tried to pair the device several times with the same result.

  Tried to do the manual setting over 15 times. Same mistake. Restored the factory settings once again.

  Changed my password for my iPhone and laptop updated Apple.

  Because the Apple TV is now connected to my wifi that he decided to do an update. I waited 15 minutes for this, so I could try to use my new password for apple now.

  Tried to pair the device again. Still getting the same error message.

  Why is it so difficult? What I'm doing wrong here? I did this for 2.5hrs now. Can someone help me please?

  You are in the United Kingdom

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• Connection with the Apple ID server problem

  iCloud on my ASUS ZENBOOK can not connect.  It always returns a connection error message: there is A PROBLEM CONNECTING WITH THE APPLE ID SERVER.

  My laptop is an ASUS model UX303L (64-bit) running Windows 10 Home, Version 1511.

  Key points:

  (1) I have connected to my very well through several iPhones iCloud account, multiple iPads, an iMac and another ZBOX PC running the same version of Windows 10.  (Confirms that it is not a problem of "User" with me trying to use the wrong password).

  (2) from my laptop problem, I can connect to the internet fine iCloud - Chrome and Firefox version by.

  (3) I have the latest version of iTunes on the laptop, which starts very well and logs in my iTunes store (.. .in the Australia).  [This is interesting, because I guess that both iTunes and iCloud connect to the same server Apple ID to check the details].

  (4) I made sure that Windows is completely up to date, and that my office 2013 is also entirely up-to-date, with a full stop/restart of the laptop to make sure that nothing is installed in half.

  (5) I uninstalled iCloudand reinstalled from a new download.  Did not help.

  (6) before the iCloud upgrade to the latest version there is + 2 weeks (I'm now on the 5.2.1.69 Version), iCloud worked perfectly, including the good synchronization of Outlook calendar and favorite contacts on different browsers.  I want to try and reinstall the old version - see if that restores me to my nirvana earlier, but I couldn't find anyway to do.

  Suggestions as to best 'next steps', I can take would be highly appreciated...

  I have exactly the same problem... is there any help for us?

  So far, I've been forced to use Windows 7

• my iphone says verifivstion failed there is a connection to the apple id Server error

  my iphone says verification failed there is a connection to the apple id Server error

  What are you trying to do when you get this error? Sign in settings/iCloud?

• Cannot connect to the site Web of family security - loop redirection then error.

  I am trying to connect to the Security Web site for the family to see the log files and to make some changes.  Identification of phase of my work.  When I connect on the family safety I see it bounce login.live.com and site security for the family quickly and then I get an error.

  Connection
  Something was wrong and we cannot connect you right now. Please try again later

  I tried multiple computers and browsers.  Same results.

  Don't know if this is the magic bullet, but I've just updated some information on my profile (add my first and last name) and now I can sign as if by magic in Family Safety. I had also been down since the end of July.

• Trying to activate Windows XP but I get messages saying that I can not connect to the Microsoft Activation Server.

  Software loaded, computer rebooted, selected activate over the internet (internet works), entry of information required (US) and subject - receipt cannot connect to the Microsoft activation server. tried to activiate telephone (not then given telephone number I looked on internet) called tech support and they can not activate by phone and referred me to this site.

  original title: unable to activiate microsoft xp professional

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com