location of block services

Similar Questions

• Location to Siri services do not work.

  Hi all. My location to Siri services won't work. If I tell siri to "remind me to check my mail when I'm at work" Siri comes back and say that I need to enable location for reminders services. Then I do. So I try again, and Siri says the same thing... I'll go back and look and of course, services of sites for reminders. I don't know why, he won't be the value "while using the application. Someone at - it happen or know how to fix?

  Hello trp_guru,

  Please ask questions about Siri and your location services here question in Apple Support communities. I understand how important it is to have all the features work as expected. Here are the steps that I recommend to get this working again.

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try to turn off your device, then again on the March. Sometimes, that's all that is needed for connections reset and everything working properly again. This article help from Apple will help you to do: restart your iPad, iPhone or iPod touch. Please do not reset the force, as this is not necessary at this time that your device is not with these symptoms.

  If it does not help to solve the problem with Siri and location of services, please open this help from Apple article. If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Check the section still not 'connect?' and look at the instructions to reset the network settings. But I would like that you choose high to reset all the settings. Settings network brings the network settings to factory default. But location-based services can include parameters from other areas. In addition, reset all settings includes reset network settings, so it will cover the two bases in reset. This will reset most of the iPhone settings. When you have completed the process, your iPhone will restart. Despite the fear two-step attention, this does not affect your data. All your music, videos, photos and e-mail accounts will remain in tact, but also any SMS text or iMessages.

  If the issue is still not resolved after all this, you will need to restore your device back to the factory via iTunes settings. This option will erase all data on your device. Please ensure that you have your backup is complete before doing this step. We need to use iTunes to perform this step is because we need iTunes to help install a new version of iOS. This section of the help of Apple will help you to make this step: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings. Please make sure you set the camera as new and don't restore all information from iCloud iTunes backup again.

  Once the device is configured as new, you will test to see if Siri and location services are working properly and remain activated. If this problem occurs is more, we know that the problem was with some data on the device or in the version of iOS, which will most likely be saved in your backups. You can make the data manually using iCloud or iTunes, but not restored from the backup that you will bring the problem immediately in. Once you log in iCloud with the same Apple ID you used previously, all your data stored in iCloud will begin restocking on the device. Depending on whether you have a Mac or PC, and the version of iTunes you have, you can use one of these four articles helps to help you get your music and other data back to your device in iTunes:

  1 11 iTunes for Mac: connect or disconnect your iPod, iPhone or iPad

  2 11 iTunes for Windows: set up sync to iPod, iPhone, or iPad

  3 12 iTunes for Mac: iPod, iPhone, or iPad sync

  4 12 iTunes for Windows: iPod, iPhone, or iPad sync

  Thanks again and have a great rest of your day.

• Location of power Services to find my friends

  Can not pass of location Services for him to find my friends.

  Also in the settings-life private location Services is enabled; 'Find friends' went to 'NEVER', but I am unable to change it.

  "Sharing my position", it is turned on.

  Can anyone help please? Thanks in advance!

  Hello

  You can have Restrictions enabled on your iPhone.

  • Settings > general > Restrictions > location (under privacy) Services

  Restrictions may have been activated directly (such as you) or via a profile installed on your iPhone (such as a school or business):

  More information:

  Restrictions of use on your iPhone, iPad and iPod touch - Apple Support

• BEFSX41 - Blocked Services in restrict access tab is grayed out

  Blocked Services restrict access tab is grayed out, so I've updated to the current version of the firmware:
  Release date: 14/08/2009
  Current firmware: Version 1.52.16.4
  Product part No.: BEFSX41 v1/v2/v2.1

  Hung services is always grayed out.

  I have tried Linksys chat, but they do not help this serial number is "out of warranty". So I'm looking a way enable the blocked Services feature. .  Does anyone know how to activate it?  Thank you.

  Are you sure that you create an authorization rule and not a deny rule. Hung services are available that allow for rules, i.e. you want to allow internet traffic except some blocked services. A deny rule will block all internet. In the demo UI I choose blocked services if I select "allow".

• Location without WiFi services

  Say I want Siri to tell me the time (or some other geo-referenced information).  According to reports of Siri, that he can't tell the location of my computer without WiFi. But my computer connects to the Internet via ethernet.  How can I solve this problem and 'teach' Siri my location?

  MJH

  Location Services only works via Wi - Fi.

• Location iPhone 4S services dimmed after 9.2

  I know that I have a dinosaur of the iPhone, but I love my little 4 of s.  Just updated to iOS 9.2 and location services are grayed out.  I can't find any setting process or restore.  Thanks for all the ideas.

  Do you have any restrictions on? I ran into this issue when I have had share my location disabled in restrictions (not in the parameters of location, but under restrictions itself). Once I allowed him, I could see again the location services and make changes. Individual applications needed to be admitted again once they are open again, but the parameters of the system should be visible.

• Location of Q10 services blackBerry refuses to turn on IT

  Hi, iam trying to turn on site services, im on the right screen and its judgment, I know im supposed to just swipe or tap to activate it on but its just not do it, its similar im without touching the screen, it does not just move!... infuriating! Please help, thanks in advance

  Are you a parent or some such that would set who? This could be the source of the location parameters locked.

• Location of portal service

  Hello

  Y at - it all location integrated for the vCAC services Portal? Or is it possible to somehow? I am interested in the Russian language for the end user, for example.

  Thanks in advance.

  In vCAC 6.0, but I think that it will be available in some of the next versions.

• Location of the service after upgrade to vSphere Console

  In December, I improve VMWare VCenter and servers ESX, vSphere 4.0 3.5 u1. I then discover that my Service on hosts 3 Console, have changed rather than the local store, to a shared SAN store. I can find it, is the only workaround:

  de : http://www.VMware.com/support/vSphere4/doc/vsp_esx40_vc40_rel_notes.html

  If you choose a store of data shared for the service console, the installation or upgrade of software tool does not issue a warning

  For ESX 4.0, the service console must be installed on a VMFS datastore that resides on the local host drive or on a drive of SAN which is masked and zoned on that particular only host. This version does not support the installation of the service on a data store console that is shared between the hosts. When you install ESX 4.0 or upgrading to ESX 4.0, you must select a store location of VMFS data for the service console (esxconsole.vmdk). If you select a data store that is shared between the hosts, the installation tool or software upgrade does not issue a warning.

  Workaround: Do not install the service on a VMFS datastore console shared between hosts.

  Is there someone who can tell me, how to move the service console?

  Best regards

  Peter

  I do not think that it is possible to move the ESXConsole.

  Read this post http://communities.vmware.com/thread/214439

  The easiest way is to reinstall GUESTS concerned with access to SAN.

  In this way, that you don't have the ability to install ESXConsole on SAN disks.

  I googled and found this post that explains how to handle the ESXConsole, maby this will help you.

  http://getvirtical.blogspot.com/2009/11/making-cloned-boot-LUNs-boot-with-ESX4.html

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points.

  Concerning

  A. Mikkelsen

• blocking service hpqddsvc

  My laptop started to randomly stop with attention, no blue screen no error report, after which windows starts normally, if not always completely, before stopping again. Ill do this short before he out craps once again, and I hope I'll be able to use it long enough to check back for responses.

  Hello

  It is a service associated with HP printers. From what I can find, it has not really need start at Windows startup.
  It is called "HP CUE DeviceDiscovery Service"

  To set this manual, or simply turn it off. Follow these steps.

  Click on start and type > Services > press enter
  Search for "HP CUE DeviceDiscovery Service', defined and right click on disable or manual.

  If you find that your HP printer does not work, uninstall and reinstall the HP software.

  Hope that helps. Mark <> Microsoft Partner

• Features vs iPhone location services

  1 rental Services is the single most noticeable drain on my battery (4 s).  I prefer to keep off.

  2. turn on, which seems like it might be a simple toggle on the top-shot screen, is buried to four taps deep into the settings Menu.  Turn requires the same thing, MORE a single tap more confirmation.

  3. I've heard that the software update by default to the location of the Services ON.

  4. why the pressure to allow this service?  Who gets to know my position?  Who benefits from this knowledge?

  This afternoon I wanted to know if my local library was still open.  Each variation of the investigation, Siri demanded location Services to be activated, even if the question was framed in terms of 'calendar' and 'open hours,' with the name of the library - single without ambiguity.  I drove to the building instead.

  Feature request: toggle button Location Services to drag to the top screen.  If "it works."

  You are not writing Apple here.  This is a user to user forum.   If there is a feature you want to do to Apple, use this link:

  http://www.Apple.com/feedback/iPhone.html

• Unable to turn on location services

  I upgraded to 9.3.3 yesterday. Today I was downloading an application that requires location services to be turned on. Applications are defined correctly in regards to my preferences, however whenever I put the main location of active Services button, it turns off when I get out.

  Very frustrated!

  Thank you.

  Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

• Solution on how to remove always on location service in the status bar

  Think about the last apps that you use which has led to the appearance of the purpose of the location in the status bar

  The problem is most likely due to resources are still used by these applications even if you restart your iPhone, many times

  The sign of location service can keep here.

  I tried the solution without help.

  It's a chance that I remembered the last apps I used is Runkeeper

  I went to this apps and ended.

  The problem can be solved.

  Disable background refresh App

  And also go to turn OFF the location for that Service the app & confidentiality if you think that location services is not useful for the App

• cannot locate block sender list in outlook express

  I write a question on behalf of the client. Here's the problem of the customer:

  I'm not able to locate my block sender list in my OUTLOOK EXPRESS email. Some of my emails do not come to me and wanted to check my block senders list, but it is empty.

  Note that if an address is in the blocked senders list, the message will still arrive in deleted items.
   
  In OE: Tools | Message rules | List of blocked senders.
   
  If messages do not come at all, check the Message rules, especially for a rule that has remove it from the server as the action.
   
  Please also indicate the client to send a message to one of these problematic addresses and ask them to respond with the answer option. If this message is received, the sender has the wrong address for your customer in the address book.

• Problem of GPS location after updating to IOS 10

  Anyone have problems with GPS location problem after update from IOS10?

  I drove Baltimore DC Regan airport, I tried with apple and Google map yesterday map, location was far from the highway, he could not determine where we are, we were on the road, but he kept us showing that we were on a local road to the highway.  Could not find 90% of time on my road.  Finally, I have to use my phone to brother with IOS9, we were fortunate that it has not updated to the most recent IOS 10.

  I wonder if anyone has the same problem after the update.

  Hello yinchiu85,

  I understand that your iPhone seems to have a hard time determining its location precisely. Fortunately, there are a number of steps you can take to help improve the accuracy of the information.
  

  Improve the accuracy of GPS

  GPS accuracy depends on the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. To improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
  • Keep a clear vision in several directions. Walls, vehicle roofs, buildings of great height, mountains and other obstacles can block the line of sight to GPS satellites. In this case, your device uses Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  If your iPhone is still unable to pinpoint your position, the next step would be to restore location Services.
  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  On privacy and location in iOS Services 8 and later versions
  https://support.Apple.com/en-us/HT203033