location of customer Cisco .pcf file

Similar Questions

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

• Location of custom preferences plugin Illustrator

  Hello

  What is the location of custom preferences plugin Illustrator?

  If I put a few plugin custom preference, is a place where I could change it manually?

  Thank you.

  If you're talking about preferences to read and to write with the AIPreferenceSuite, they are stored in a text file called "Adobe Illustrator Prefs".

  This file is stored in the folder of depends on your version of OS and Illustrator for example

  Illustrator CS6 on Mac OSX:

  ~/Library/preferences/Adobe illustrator CS6 settings/fr_FR /.

  Illustrator CC 2015 on Windows 10:

  %UserProfile%\AppData\Roaming\Adobe\Adobe 19 Settings\en_GB\x64\ illustrator

• Fichier.conf OTC has no details of the location of the ssl wallet file

  Hi gurus B2B.
  
  All by the HTTPS configuration had we observed that certain lines of were missing in the fichier.conf located in < Oracle_Home > \Apache\Apache\conf. The mentioned below, the lines are missing en.conf OTC but present OracleB2B dans.conf
  Location of the ssl file same portfolio is also absent in the fichier.conf of TBT as mentioned below.
  Can u please let us know as why these lines are missing or you manually add these lines when we do HTTPS on OTC?
  
  
  
  
  Listen 4444
  
  
  
  < VirtualHost default: 4444 >
  
  # General setup for the virtual host
  
  DocumentRoot "E:\Oracle_b2b\cachehome\Apache\Apache\htdocs".
  
  ServerName DSCP17506. TechMahindra.com
  
  ServerAdmin [email protected]
  
  ErrorLog "| E:\Oracle_b2b\cachehome\Apache\Apache\bin\rotatelogs logs/error_log 43200 "
  
  TransferLog "| E:\Oracle_b2b\cachehome\Apache\Apache\bin\rotatelogs logs/access_log 43200 "
  
  Port 443
  
  # The SSL engine switch:
  
  # Enable/disable SSL for this virtual host.
  
  SSLEngine on
  
  # Suite of SSL encryption:
  
  # List of encryption algorithms that the client is authorized to negotiate.
  
  All SSLCipherSuite!: ADH:! EXPORT56: + HIGH: + MEDIUM: + LOW: + SSLv2: + EXP
  
  # Server Wallet:
  
  # The server wallet contains the server private key certificate
  
  # and certificate trust. The value of SSLWallet in the portfolio directory
  
  # using the syntax: file: < path-to-door-currency-directory >
  
  SSLWallet file:E:\Oracle_b2b\cachehome\Apache\Apache\conf\ssl.wlt\default
  
  
  
  # Certificate lists CRL (CRL):
  
  # Set the path of the CA revocation where to find CA CRL to customer
  
  authentication # or alternatively a huge file containing all the
  
  # of them (file must be PEM encoded)
  
  # Note: Inside of the SSLCARevocationPath you need hash symlinks
  
  # to point to the certificate files. Use the provided
  
  # Makefile to update the hash symlinks after changes.
  
  #SSLCARevocationPath conf\ssl.crl
  
  #SSLCARevocationFile conf\ssl.crl\ca-bundle.crl
  
  
  
  # The authentication of the client (Type):
  
  # Client certificate verification type and depth. The types are
  
  # No, optional and require
  
  Need to #SSLVerifyClient
  
  
  
  # Access control:
  
  # With SSLRequire, you make a directory-based access control
  
  # on arbitrary complex Boolean expressions containing server
  
  # variable control and other directions of research. The syntax is a
  
  mixture of # between C and Perl. See the mod_ssl documentation
  
  # For more details.
  
  # < location / >
  
  #SSLRequire (% {SSL_CIPHER}! ~ m/^(EXP|)) (NULL)-/.
  
  # and eq % {SSL_CLIENT_S_DN_O} "powder of snake oil, Ltd.".
  
  # % {SSL_CLIENT_S_DN_OU} in {"staff", "CA", "Dev"}.
  
  # % {TIME_WDAY} > = 1 and % {TIME_WDAY} < = 5.
  
  (# % {TIME_HOUR} > = 8 and % {TIME_HOUR} < = 20).
  
  # % {REMOTE_ADDR} = ~ m/^192\.76\.162\. [0-9] + $/
  
  # < / location >
  
  
  
  # SSL engine options:
  
  # Set different options for the SSL engine.
  
  # o FakeBasicAuth:
  
  # The client X.509 translate basic authorization. This means that
  
  # the standard Auth/DBMAuth methods can be used for access control. The
  
  user name of # is 'a line' version of the X.509 client certificate.
  
  # Note that no password is obtained from the user. All entries in the user
  
  # file needs this password: 'xxj31ZMTZzkVA '.
  
  # o ExportCertData:
  
  # This operation exports two additional environment variables: SSL_CLIENT_CERT and
  
  # SSL_SERVER_CERT. These documents contain the PEM-encoded certificates of the
  
  # (still existing) server and client (existing only when customer)
  
  (# authentication is used). This can be used to import the certificates
  
  # in CGI scripts.
  
  # o StdEnvVars:
  
  # This operation exports the standard SSL/TLS related ' SSL_ * ' environment variables.
  
  # By default this export is disabled for performance reasons.
  
  # because the extraction step is an expensive operation and is usually
  
  # no need for static content. If we allow in general of the
  
  # to export queries CGI and SSI only.
  
  # o CompatEnvVars:
  
  # This operation exports obsolete environment for backward compatibility variables
  
  # for Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. use this
  
  # to ensure compatibility to the existing CGI scripts.
  
  # o StrictRequire:
  
  # This denies access when it is "SSLRequireSSL" or "SSLRequire" applied even
  
  # in a situation of "Satisfy", i.e. when it applied the access is denied
  
  # and no other module can change.
  
  # o OptRenegotiate:
  
  # This allows optimized connection handling SSL renegotiation when SSL
  
  # directives are used in the context of the directories.
  
  #SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
  
  < files ~ "------." (cgi | shtml) $">"
  
  SSLOptions + StdEnvVars
  
  < / files >
  
  
  
  < directory "E:\Oracle_b2b\cachehome\Apache\Apache\cgi-bin" >
  
  SSLOptions + StdEnvVars
  
  < / Book >
  
  
  
  SetEnvIf User-Agent ".» * MSIE.*"nokeepalive ssl-unclean-shutdown
  
  # Server logging:
  
  # The House of a custom SSL log file. Use this setting when you want one
  
  # compact without error SSL logfile on a base of the virtual host.
  
  "CustomLog E:\Oracle_b2b\cachehome\Apache\Apache\logs\ssl_request_log"%t % {SSL_PROTOCOL} % {SSL_CIPHER} x \"%r\ x hour" %b ".
  
  < / VirtualHost >
  
  
  
  Thank you for your help in advance.
  
  Kind regards
  Priyanka

  Not sure that the CTA is expected to take in charge the entire feature. Please add entries manually. Let us know.

• I have a new laptop and when I transferred my music Itunes can't find it. Is that a large library is more quickly to locate my music than 1 file at a time

  I bought a new laptop and transferred my music from my old laptop to my new laptop, and when I downloaded the new version of ITunes, it couldn't locate my music. Is there an easier way to locate my music than 1 file at a time? It is a great library and will take several days to move each file. I have a new Toshiba laptop with windows 10 OS with an I7 CPU 2.60 GHz with 8 GB of RAM

  The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parent folders, or the reader, he feeds has been a change to the drive letter. It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.

  Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. (Because of a bug in iTunes 12 you currently have to say no twice!) Look under the Summary tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.

  In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, but this time, click on search and browse the lost track. He peut then offers to try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find the titles in the same layout artist & album that they were before, with a systematic change to the path.

  If another application like Windows Media Player has moved/renamed files then the chances are that subtle differences in naming strategies will make it difficult to restore media on the precise way that iTunes is expected. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.

  If you want me to try to provide specific advice, please post back the following details:

  1. The location of the media file under Edit > Preferences > advanced
  2. The location of a sample of missing follow indicated under Get Info > file > location which begins file://localhost/
  3. The real path to the file which you gave 2 details.

  Or you could go back to the old computer and see make a library of portable split, then copy the library into a portable State.

  TT2

• Use of custom in Veristand files

  Hi all

  Have not been able to find a lot of documentation related to the use of "Personal files" in Veristand.  I would like to know some examples of the types of files users have set up.  Specifically, I would like to know if you can "call" some types of models or devices personalized (i.e. for databases or configuration settings).

  Thank you very much

  GSinMN

  Hi GSinMN,

  It has custom there some documentation in the help of VeriStand, which deals specifically with files.

  Adding custom files

  http://zone.NI.com/reference/en-XX/help/372846D-01/VeriStand/add_custom_files/

  Although aid is not quite fully reveal the capabilities of this feature. There are two distinct use cases that I could identify for the custom in VeriStand files option. I'm going to the list of people the more detail and show you an example.

  Make easily accessible to the driver files in the development environment.

  When a file is added in the custom files in the project section, it will have its own icon in the project and is included in the project dependencies. Having the file to display in the project is useful if there is a picture of troubleshooting or a specific document (calibration sheet, how to run a test, etc.) that you would like as your operator to have access to. For example, in the sample project, I realized, there is an added file called "TestA1_PreTestSetup.txt". Of the project (on the toolbar), the operator has the option "Open a file" (to view) or "export...". "to investigate his path on the computer of the operator.

  

  Please note that the file is now added to the dependencies of the project.

  If you start to investigate the project file and lets say you do a right click on it and notice that there is a Properties option. You may notice that the Description of this file is empty. In fact, it can be filled by modifying the XML source of the .nivsproj. It also leads in the second case of the use of custom files.

  Transferring files to the aim of RT which can be used by the VeriStand engine.

  If you were to investigate the .nivsproj XML, you could first find the section of the custom files, then the tags of the element that you configured.

  

  Here are the relevant tags and a jump down,

  -It points to the source of the custom file. In this case, I added the file in the directory "C:\Users\Public\Documents\National Instruments\NI VeriStand 2011\Test procédures". He is able to solve the first component 'In common Doc Dir' because it's the common directory for VeriStand, and he added then the folder of the test procedures and the name of the file that I created.

  -Fill this tag gives us the opportunity to complete the description information that occurs when we right click on the file in the project.

  -Fill this tag gives you the ability to also send the file to the target deployment. Your VeriStand engine can then access this file during the operation. With respect to the types of files that you want to use, the link in the post above should help guide only.

  Please Note: change the XML of the project offers more customization and functionality of your project, but these changes should not be made whole. An incorrect change tags in the XML file can lead to results and poor execution. Then move forward with caution and only make minor changes at the same time.

  I hope this helps. Have a nice day, GSinMN

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• When I download compressed files, they go to the local &#62; temp location, when I extracted all the files, they are sent to the My Documents folder. Can I go to the local &#62; temp location and delete the zip file?

  When I download compressed files, they go to the local level > temp location, when I extracted all the files, they are sent to the My Documents folder. Can I go to local > temp location and delete the zip file? Knowing that I still have the data in the My Documents folder.

  Once they are checked, of course. If you want to keep a backup, you can move the zip file in your documents folder.

  In fact, you can delete everything in the temporary folder that is not currently in use. Best time to do this removal is immediately after the start, before launching other applications.

• Suddenly, the 64-bit Windows 7 Media Player doesn't have a location to save the ripped files. How can I fix it?

  Suddenly, the 64-bit Windows 7 Media Player doesn't have a location to save the ripped files. It is impossible to rip CDs. How can I fix it?

  You can order these links on ripping...

  http://Windows.Microsoft.com/is-is/Windows7/rip-music-from-a-CD
  http://Windows.Microsoft.com/is-is/Windows-XP/help/Windows-Media-Player/11/rip-a-CD

  You can try this procedure to restore your windows media player.

  (1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)

  (2) turning on Windows Media Player again.

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on the "Turn Windows features on or off".

  c. check the "media features.

  d. restart the computer.

  You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.

  Or you can use the previous versions of windows media player that comes from restore points or windows backup.

  Or you can try to run 'Fixit '.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• Custom name - original file name works do not export, Lightroom creates the sequence jpeg instead of the original file number

  When you export from Lightroom with "custom name - original file name" selected, Lightroom replaces the original file with a useless jpeg sequence number. Export must have the custom, followed by the number of original file name.

  There is no option for Custom name + nameof the file.

  I would, with all due respect-

  If you "change" in the file name changes dialog box, you can set the change of name {Custom + file name}

  or Custom + Original file name!

  

• Move the location of the VM swap file in another data store

  Hi all

  Was in a task to move the 1000 to the file location of VM swap on another data store which is newly assigned to Exchange us to the existing store database file that will be decommissioned.

  Eager to check if anyone has made movement swap of VM location of the files to a data store to another and that all measures taken to move.

  Require some VM downtime?

  Thanks in advance a ton.

  Yes it is possible without interruption of service to virtual machines.

  1. make sure that your cluster is configured to use swap data store specified by host

  2. take a host in the cluster in maintenance mode, change the location of the VM configuration file to point to the new data store

  3. do this for all hosts in the cluster

  When you vMotion a VM from one host to another the swap file will get moved to the new data store. Later when you take guests to the maintenance and return output mode, vMotion occurs for each computer in the cluster virtual and file is moved.

• Can I change the location of the vmx config file?

  Hello

  I have Esx 3i 3.5 running in the cluster, and installing vCenter 2.5 Update5 as virtual machine within this cluster of ESXi. I put the configuration file vmx to this virtual machine on the wrong number of unit logic (data store). How can I change the location of the vmx configuration file to another location?

  All boards have a lot appreciate.

  Thank you

  First remove you the inventory (Yes, it's unsubscribe in my mind), and after copying you use add to inventory.

  StarWind Software R & D

• I get ERROR U44M1P7: location of the error log file: C:\Program Files (x 86) \Common Files\Adobe\Installers

  Updated Photoshop CS6 (CC) I get ERROR U44M1P7: location of the error log file: C:\Program Files (x 86) \Common Files\Adobe\Installers. First Installation and actual functioning rooms without problem, only on the update. I tried several times with the same error.

  Hi Alberto Pomares

  Please visit the Doc KB: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

• How can I change the looks of Access Infrastructure Web location for the virtual machine files?

  How can I change the looks of Access Infrastructure Web location for the virtual machine files?

  My default is set to MACHINES C:\VIRTUAL.  But I want to change it to turn to an external drive connected with an eSata cable. Can I do this?

  Hello

  Add just like a new data store.

  Login to your web access, select your host (not the virtual machines) in the left menu.

  You should see a link on the right side with "Add data store", give it a name of store and add the directory.

  Now, you can add a virtual machine to this place.

  Good luck!

  --

  Wil

  _____________________________________________________

  Visit VMware developers at http://www.vi-toolkit.com wiki

• Location of the environment properties file

  Hi all
  
  I am a beginner and I have a question about the property file...
  
  What would be the best location for the environment.properties file? We are looking at two places field House and House of bea, which one would be the best option.
  
  Add entries in the environment.properties file, we need to restart the field or just redeploy application would pickup the changes?
  .
  Thank you
  Win

  Hello

  ** is the best place to put your properties files. No need to restart your server after you change these files if your application reads the files properties as mentioned below.

  It is also another good Option to add the property file situation including the Filename in the setDomainEnv.sh script CLASSPATH property. (but in this case it may restart the server if you want to change something in the file properties)

  I tested it and it works with charm...
  After you have placed any property inside the "root of the field" file (example :) directory can be read without restarting the server... I tried the following after placing "a.properties" within the root of the domain... Even I changed the values in the file property 2 to 3 times and each time it is reflected in my JSP as *(No need to restart the Servers) *.

  * "a.Properties" *.
  City = New York (SpiderMan City)
  country = America

  * "index.jsp". *
  <%@ page import="java.util.*" %>
  
  
  
  
  
  

  
  < %="">< br="">InputStream is = new FileInputStream (". / a.properties"); < br=""> Properties prop = new Properties (); < br=""> prop.load (East); < br=""> out.println ("City:"+ prop.getProperty ("City") "); < br=""> out.println ("country:"+ prop.getProperty ("country") "); < br=""> %>
  
  
  

  .
  .
  Thank you
  Jay SenSharma
  http://WebLogic-wonders.com/WebLogic (WebLogic wonders are here)