Similar Questions

• Installing guest OS of multiple images of floppy disks - is it possible?

  I'm really frustrated with problems installing on Workstation 7.1.3

  The problem that I am facing is that my Dell machine is not a floppy drive.

  And I discovered (after the fact) that a USB floppy drive is not supported under

  VMware workstation as peripheral startup, even if it seems to start,

  but it fails during the operation.

  So I created images of floppy disks for my old WinNT and DOS 6.22 OS', but I can't

  find a way to switch between images of floppy disks during the installation.

  Please tell me that this is possible and I'm just on something,

  otherwise, I think that there is a major gap in Workstation 7.

  Any help in this matter is greatly appreciated.

  -alex k

  It's possible - but much more advanced, then exchange of floppy-images

  the procedure I mentioned should work - or it really is a new flaw in WS 7.

  I've done this countless times with older versions

• I can't turn my photos because I can't disable the 'read only' attribute of my files.

  Whenever I go into the Properties uncheck the read-only attribute of my files, it won't let me, but he will return back as soon as I click on ' OK. "

  I tried to change the property, as well as the opening of full control.

  I'm already administrator.

  It happens even when I create new folders on my desktop. It it automatically read-only, and I am able to uncheck with him coming back after I click OK without worrying.

  Help, please.

  The photos are from my phone. Open them in the image viewer and I'm just turning them using that, or good right click to rotate.

  This also happens with the new cases, I create and save all the images that I have on my computer.

  The images themselves are not read-only. The folder attribute is the problem.

  Again, there is no attribute of read-only files.

  If you use an iPhone, the photos can contain metadata that preventing rotation.

  See this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

• From El Capitan, a DMG image file is read only

  I have a Seagate external drive to Mac OS extended (journaled) format with 2 partitions. On a partition of the disk, I have an image DMG file which had read and write permissions to the title of Yosemite. Now with El Capitan, the file is read-only when I open it. But what is strange, is that when I do a "Get Info" on the queue image before I open it, it says I've read & write permission.  Then when I opened the image file, Get-Info gives me conflicting information:

  (1) it is said: "read only".

  (2) in the table, it is said to "user (me)" that permissions are "read & write".

  If I try to change the permissions (after unlocking the 'Get Info' dialog box), everything is gray and I can't make changes.

  I thought the problem was similar to:

  Re: external hard drive read it now after update of el capitan

  So I followed the 'solution' listed (used disk utility > first aid), no effect.

  I also downloaded the driver Seagate-fix, but this has no effect (which I expected since mine cannot be an NTFS problem...)

  Any help appreciated.

  JIm

  How is the Seagate HDD formatted?

  If she is still formatted as NTFS then it is very likely that your third party necessary for writing to NTFS software is obsolete. With the El Capitan, upgrading a number of packages NTFS should be updated in order to be able to write the formatted NTFS disks.

• CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  Hi leejarvis,.

  ·         What version of the operating system is installed on the computer?

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Have what troubleshooting measures you tried?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• I restored a file on a hard disk newly installed using system MS Backup tool and now it is "read only".

  original title: "read only".

  I restored a file on a hard disk newly installed using system MS Backup tool and now it is "read only".  Anyone has a solution.  I use XP Professional sp3.  Thank you.

  Right click on the file > properties > uncheck Read only > apply > OK.

• Disk is read only-no matter what I do...

  I have a 2 TB AV disc which worked fine - until this week.  All of a sudden if I try to write to the disk, I get a message saying the disk is write-protected.  Check the drive, all files seem to be marked read-only.  When I change, they return immediately to be read-only.  I am an administrator and I have all permissions.  This happened right after that I ran a disk defragmentation program, but support for the program swear their software is not and cannot change the attributes of any sort, not to mention all the files in each folder on the entire disc.  Any help and thoughts appreciated - it's very frustrating!

  The read-only attribute is not applicable to folders in Windows Vista. So tried to change the read-only attribute how you do doesn't help. Despite tech that said support defragmentation program, it is obvious that defragment the external hard drive has a problem. There is no reason for you to defragment an external hard drive holding nothing but the data anyway.

  Try to take possession of the disc.

  To take ownership of a folder (or drive):

  1 right click on the file (or the disc) you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click on OK

  If you do not see the Security tab, then switch Mode without failure.

  Alternatively, you can take possession of the car from the command line. Start an elevated command prompt.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK to the UAC prompt and you will now have an elevated command prompt.

  For files or directories or disks (will perform action recursively):

  takeown /f directory_name /r /d [Enter]
  ICACLS nom_repertoire/grant administrators: F/t [Enter]

  or

  takeown /f /r d:\ dy [Enter] (where d:\ is the correct letter of the destination drive)

  Replace your username for administrators in the top line. MS - MVP - Elephant Boy computers - don't panic!

• SE message: changes made to this photo has not been saved. The file may be read-only or you are not allowed to check-in at the location of the photo, trying to crop an image, or mount it

  Original title: photos

  If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.

  They worked very well the other day, what's past?

  Hi boneyardwolf,

  1. where are the photos?

  2. you have any third-party photo editing software?

  3. what type of files you want to change?

  You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/9f6bf1f8-50EC-4baa-b2c5-212c823ded68

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hard locked read-only disk

  Ive had this problem once before. I turned on my PC yesterday and my WD 500 GB hard drive (number 3) was not recognized. Then I did a reboot and the car has shown once again, HOWEVER, the reader has the read-only flag in DiskPart and disk attrib commands using clear readonly with the right selected disk does not work. DiskPart groaned just could not clear the attribute.

  Any suggestions are welcome & Im ready to try anything. I doubt that it is a driver problem or a hardware problem, such that it worked very well.

  All the tests in Ubuntu 10.04 (my second os) came good and I can write, so Windows 7 has done something, don't know what.

  See you soon,.

  Conor M

  Information system

  ASUS P5N - D
  Intel Pentium 4 3.4 GHz
  2 GB of Ram
  Seagate Barracuda 80 GB IDE [system drive]
  Samsung 80 GB SATA
  WD Caviar Blue 500 GB SATA [the player]

  Right, I stumbled upon a fix! (finally)

  I hope this helps others as it has helped me.

  Open the properties of the drive and goto the tab drivers

  Uninstall the driver

  Restart your PC

  When it starts again, open a session and I must say that the device has been installed successfully.

  Restart again (if windows doesn't tell you)

  Now its works perfectly.

  Thanks for your help Amrita

• Read only the virtual disk?

  Hello-

  I have Vmware Server 2 x86_64 installed on my Hardy Heron Ubuntu 8.04.2 Server x86_64 and it seems to work very well.  I have created a virtual machine for Slackware 12.2 and put the DVD iso, Slackware in the right directory.  The virtual machine starts the DVD fine and I started the Slackware Setup.  However, when I went to set up the hard drive with cfdisk (part of the standard installation process Slackware) I noticed two things:

  1. the drive has been turned ReadOnly, so that I could not score; and

  2. I created a virtual disk of 11 GB, but in cfdisk he only appear only 4.7 GB.

  What I am doing wrong?  Any help would be greatly appreciated.

  Thanks in advance.

  Well, I'm just guessing because I haven't worked on the software you're talking--can be the partition its display corresponds to the DVD player itself as the DVD is normally read-only and the size of the disc is 4.7 GB. .. You can check it out please.

  Points of reward if you find useful response

• Read only images - how to unlock

  It's the kind of thing that drives me crazy.  Hours, I tried to open images in "bridge."  The images are all files-RAW images of the milky way (night sky) that I wash to stack, with the idea that multiple images of the night sky even will show a large detail when stacked, etc. The problem is that they are a symbol of locking of the cushion on them.  This makes them an image of 'read only '.  There is no obvious way to open these images.  Two books on photoshop provide no response in the index.  Secondly, I would like to auto - align the images, but it doesn't seem to be a way to do this in CS - 4.  Any ideas are appreciated.

  Now for constructive critisim of Adobe.  Extremely expensive product that you sell, you are doing a horrible, horrible, work provide customers what they need to use the software.  Why isn't there a DVD included with the software that provides comprehensive and detailed information necessary so a question can easily answer?  Why you force your customers to your web site?  To use your web site, I had to accept your software spies, lower my security settings, deal with nonsense of password and login.  And if you don't have high speed internet, forget your site TI-loading takes forever.  I lost hours to get to this point.

  And I will never buy CS5.  I'll never buy Adobe again: the frustration level is medium to high.  Someone suggests photo editing software they like better than CS4?

  For read only files, go to Windows Explorer and select these files. RT-click top, and then click Properties. Down will be attributes. Is check read-only? If they are read-only (and not locked because of permissions, etc), if you uncheck the box, then the files will no longer be read-only. One of the common reasons to make them read-only, is if they were copied from a DVD or CD, although it sounds like you handled in ACR, from the original Camera RAW files. Is this correct?

  For files that have been locked by some other means, there is great use, Unlocker, which should be able to unlock the files. Not necessary IF they are just read-only.

  Good luck

  Hunt

  [Edit] As it took me 8 tries to this post, he gets up late, but NOW I see that Marian had given the same solution and an hour before. This post wasn't projection, when I started to try to this post. The forum becomes more wobbly every day!

• disk is read only

  disc shows pieces of music, but cannot play the disc is read-only. How can I change this so that the music will play

  Thanks for your help. I think I have a bad burn.  Well.

• Error: "CHKDSK cannot continue in read-only mode" while trying to perform the disk check

  : Title real: my backup is suddenly not recognized in Windows 7

  A backup I use regularly is currently not recognized - I went through several pages of suggestions without deleting the instructions to format the drive. I did chkd sk/p/r suggestions with this result:

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  
  

  F: C:\Windows\System32>CHKDSK

  The type of the file system is NTFS.

  Volume label is Micron disc for backup.

  
  

  CAVEAT! F parameter not specified.

  Running CHKDSK in read-only mode.

  
  

  CHKDSK checks the files (step 1 of 3)...

  11520 file records processed.

  Finished files checking.

  11 big folder files.

  0 incorrect file records processed.

  0 EA records processed.

  0 analysis of the cases handled.

  CHKDSK is checking the index (step 2 of 3)...

  53 percent. (12004 index entries processed 11514)

  Error detected in the $I30 for 5 file index.

  Error detected in the $I30 for 5 file index.

  12004 index entries processed.

  Index verification completed.

  
  

  Errors found. CHKDSK cannot continue in read-only mode.

  Then I tried to reassign the drive letter of the F to h: the display shows the file system is "RAW and the status is healthy, etc."  He doesn't see this as a NTFS format, even if the chkdsk identified it in this way with the correct volume lable, so I know it was to see the right player.  I almost all still on my coomputer - this backup is material that I could go back more old backup drives, but it's the best version of consolicated of my automatic backups of Win 7, so I didn't it wouldn't be pretty.  Am I out of luck?  Is this drive Kaput

  and should I give up on this?

  Thank you

  Hello
  I suggest you contact the manufacturer of the USB to the backup drive then try formatting the USB and check if the problem persists.

• CD - RW will only burn the data read-only and will not format a disk

  I have a laptop Latitude D610 w/a CD-RW/DVD (SCB5265) disc.  I can burn data on CD, but the data is read-only.  I can't format a drive either.  The drive itself seems to be well - do I need a different software?  If so, someone know where I can find that?

  Thank you - this forum has been a great help to me.

  
  

• Apple UDIF read only compressed (bzip2) in my iMac!

  I noticed a new feature added to my iMac:

  'Apple UDIF read-only compressed (Bzip2)'

  What? Why? and how did get there?

  Why do I need?

  I think, but not sure it was added after the last updated iTunes (version 12.1)

  No explanation will be appreciated.

  PS

  It does not appear in my Finder...

  Thank you

  

  

  

  This is the disk image to the Flash Player installer that you downloaded.

  It is not mounted, so it will not be displayed in the Finder.

  With it, selected as shown in the second screenshot, click on the button of the mount. Then, eject in the Finder.